| 1 | 1 | SHAPING MACHINE \nAll geared precision shaping machine 2HP motor, Min 10 inch capacity. manual feed for table With standard accessories/fittings. Motor, starter and vice. Work holding vice. Spare belts. Proper cutting tools. With standard parts and electricals.\n | item 1 | 2 | Nos |
|---|
| 2 | 2 | SLOTTING MACHINE.\nMaximum stroke-175mm Longitudinal movement-200mm Cross movement-110mm Spare belts. Dividing head with rotary table. Cutting tool holder. Indexing unit. Handle for stoke adjustment. self centering Chuck. With standard parts and electricals. Cutting tools for key way cutting and groove cutting.\n | item 2 | 1 | Nos |
|---|
| 3 | 3 | HORIZONTAL/UNIVERSAL MILLING MACHINE \nmin. APPROX.1100*200 mm table,45 degree swivelCross and vertical -manual feed.Arbor diameter-APPROX. 25.4mm Head motor-2HP/1440RPM. With standard parts and electricals.\n | item 3 | 1 | Nos |
|---|
| 4 | 3.1 | Universal dividing head with tailstock & chage gears | item 4 | 1 | Nos |
|---|
| 5 | 3.2 | 3 jaw chuck and back plate for UDH | item 5 | 1 | Nos |
|---|
| 6 | 3.3 | swivel base Machine vice | item 6 | 1 | Nos |
|---|
| 7 | 3.4 | Machine lamp | item 7 | 1 | Nos |
|---|
| 8 | 3.5 | Stub arbor with suitable size | item 8 | 1 | Nos |
|---|
| 9 | 3.6 | Coolant pump, tank and fittings. | item 9 | 1 | Nos |
|---|
| 10 | 3.7 | Vertical milling attachment | item 10 | 1 | Nos |
|---|
| 11 | 3.8 | Rotary table | item 11 | 1 | Nos |
|---|
| 12 | 3.9 | Suitable Cutters: Face milling,end milling, spur gear cutter, helical gear cutter, key way milling cutter. Collets , Collets adaptors (1 Set) | item 12 | 1 | Nos |
|---|
| 13 | 4 | SURFACE GRINDING MACHINE. With standard fittings and electrical, Approx max. - 200*450 mm grinding, 1 hp head motor.2400mm max. grinding height | item 13 | 1 | Nos |
|---|
| 14 | 4.1 | Magnetic table/chuck | item 14 | 1 | Nos |
|---|
| 15 | 4.2 | work light 220 v | item 15 | 1 | Nos |
|---|
| 16 | 4.3 | Grinding wheel(with spare) and adaptor set | item 16 | 1 | Nos |
|---|
| 17 | 4.4 | centralised oil lub. System | item 17 | 1 | Nos |
|---|
| 18 | 4.5 | radius and angle dressing attachment | item 18 | 1 | Nos |
|---|
| 19 | 4.6 | spare grinding wheel and adaptor set | item 19 | 1 | Nos |
|---|
| 20 | 4.7 | Balancing stand with mandrel | item 20 | 1 | Nos |
|---|
| 21 | 4.8 | Coolant system with splash guard | item 21 | 1 | Nos |
|---|
| 22 | 5 | RADIAL DRILLING MACHINE. \nhand feed SIDDHAPURA model Drill capacity-max. 38 mm\nApprox. 200 mm spindle travel Spindle speeds-8 Motor-1 HP\nWith spare belt, coolant fittings Table vice. drill chuck,\narbor and sleeve DRILL BITS, With standard parts and electricals.\n | item 22 | 1 | Nos |
|---|
| 23 | 6 | HYDRAULIC POWER HACK SAW MACHINE.\nWith 2 numbers of blades. Coolant pump.14\" blade,1 hp \n | item 23 | 1 | Nos |
|---|
| 24 | 7 | LATHE TOOL DYNAMOMETER\nTo measure cutting forces in a lathe tool at different speed. 3 component. Strain gauge bridge balance Digital Force Indicator - two/three channel, to read both forces simultaneously. Balancing Potentiometer for initial balancing Range - 0 to 200 Kg, least count - 1 Kg. Instruction manual Calibration chart With standard parts and electricals\n | item 24 | 1 | Nos |
|---|
| 25 | 8 | DILLING TOOL DYNAMOMETER \nMechanical Sensing Unit with Job Holder with strain Gauges mounted on it. Digital Force Indicator – two channel, to read both thrust and torque simultaneously. Balancing Potentiometer for initial balancing Range – thrust – 0 to 200 Kg, torque – 0 to 20 Kg m, least count – 1 Kg. Calibrated. With standared parts and electricals.\n | item 25 | 1 | Nos |
|---|
