Uttarakhand Workforce Development Project has published Supply And Installation Of Turner Trade Equipments , Machinery For Upgradation Of Priority Itis In Uttarakhand. Submission Date for this Tender is 03-11-2020. Cutting Crimping and Punching Tools Tenders in Dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
Name of Work: SUPPLY AND INSTALLATION OF TURNER TRADE EQUIPMENTS, MACHINERY FOR UPGRADATION OF PRIORITY ITIs IN UTTARAKHAND | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Supply, On-site assembly, start-up and Training of the Purchaser's personnel for the Trade Equipments as mentioned below:- | BI01010001010000000000000515BI0100001112 | ||
2 | 1.01 | Surface Plate - Granite | BI01010001010000000000000515BI0100001113 | 2 | Nos |
3 | 1.02 | Bench vice | BI01010001010000000000000515BI0100001114 | 12 | Nos |
4 | 1.03 | V-Block | BI01010001010000000000000515BI0100001115 | 2 | Nos |
5 | 1.04 | Universal Surface gauge | BI01010001010000000000000515BI0100001116 | 4 | Nos |
6 | 1.05 | Hammer ball peen | BI01010001010000000000000515BI0100001117 | 12 | Nos |
7 | 1.06 | Chisel cold flat | BI01010001010000000000000515BI0100001118 | 12 | Nos |
8 | 1.07 | Hammer copper/brass | BI01010001010000000000000515BI0100001119 | 24 | Nos |
9 | 1.08 | Hacksaw fixed | BI01010001010000000000000515BI0100001120 | 12 | Nos |
10 | 1.09 | File flat (with handle) | BI01010001010000000000000515BI0100001121 | 12 | Nos |
11 | 1.1 | File flat (with handle) | BI01010001010000000000000515BI0100001122 | 12 | Nos |
12 | 1.11 | File flat (with handle) | BI01010001010000000000000515BI0100001123 | 12 | Nos |
13 | 1.12 | File half round (with handle) | BI01010001010000000000000515BI0100001124 | 12 | Nos |
14 | 1.13 | File round (with handle) | BI01010001010000000000000515BI0100001125 | 12 | Nos |
15 | 1.14 | File half round (with handle) | BI01010001010000000000000515BI0100001126 | 4 | Nos |
16 | 1.15 | Knurling tool revolving head | BI01010001010000000000000515BI0100001127 | 4 | Nos |
17 | 1.16 | Spanner double ended | BI01010001010000000000000515BI0100001128 | 4 | Nos |
18 | 1.17 | Spanner adjustable | BI01010001010000000000000515BI0100001129 | 4 | Nos |
19 | 1.18 | Pliers flat nose | BI01010001010000000000000515BI0100001130 | 30 | Nos |
20 | 1.19 | Try Square | BI01010001010000000000000515BI0100001131 | 8 | Nos |
21 | 1.2 | Plain Ring and Plug Gauge | BI01010001010000000000000515BI0100001132 | 2 | Nos |
22 | 1.21 | Morse Taper | BI01010001010000000000000515BI0100001133 | 2 | Nos |
23 | 1.22 | Drill Drift | BI01010001010000000000000515BI0100001134 | 2 | Nos |
24 | 1.23 | Twist Drill | BI01010001010000000000000515BI0100001135 | 2 | Nos |
25 | 1.24 | Drill Twist Set | BI01010001010000000000000515BI0100001136 | 2 | Nos |
26 | 1.25 | Drill Chuck | BI01010001010000000000000515BI0100001137 | 4 | Nos |
27 | 1.26 | Reamer machine | BI01010001010000000000000515BI0100001138 | 2 | Nos |
28 | 1.27 | Reamer Adjustable | BI01010001010000000000000515BI0100001139 | 2 | Nos |
29 | 1.28 | Combination Drill / Centre Drill | BI01010001010000000000000515BI0100001140 | 2 | Nos |
30 | 1.29 | Oil Stone | BI01010001010000000000000515BI0100001141 | 24 | Nos |
31 | 1.3 | Tap Wrench ( adjustable ) | BI01010001010000000000000515BI0100001142 | 18 | Nos |
32 | 1.31 | Machine Vice - Swivel Base | BI01010001010000000000000515BI0100001143 | 2 | Nos |
33 | 1.32 | Angle Gauge for tool grinding | BI01010001010000000000000515BI0100001144 | 12 | Nos |
34 | 1.33 | Hand Chaser | BI01010001010000000000000515BI0100001145 | 4 | Nos |
35 | 1.34 | Hand Chaser | BI01010001010000000000000515BI0100001146 | 4 | Nos |
36 | 1.35 | Revolving Center ( to suit Lathe tailstock) | BI01010001010000000000000515BI0100001147 | 12 | Nos |
37 | 1.36 | Tool Cemented carbide assorted shaped (External) for steel turning | BI01010001010000000000000515BI0100001148 | 2 | Nos |
38 | 1.37 | Thread Plug Gauge | BI01010001010000000000000515BI0100001149 | 2 | Nos |
39 | 1.38 | Thread Ring Gauge | BI01010001010000000000000515BI0100001150 | 2 | Nos |
40 | 1.39 | Machine Chaser | BI01010001010000000000000515BI0100001151 | 2 | Nos |
41 | 1.4 | Gauge Drill Grinding | BI01010001010000000000000515BI0100001152 | 2 | Nos |
42 | 1.41 | Lathe Mandrels (Diff. Types) | BI01010001010000000000000515BI0100001153 | 2 | Nos |
43 | 1.42 | Collapsible Tap with attachment | BI01010001010000000000000515BI0100001154 | 4 | Nos |
44 | 1.43 | Fire Extinguisher and buckets | BI01010001010000000000000515BI0100001155 | 4 | Nos |
45 | 1.44 | A-External turning holder, insert type, MWLNL | BI01010001010000000000000515BI0100001156 | 4 | Nos |
46 | 1.45 | B-Insert WNMG | BI01010001010000000000000515BI0100001157 | 40 | Nos |
47 | 1.46 | C-External turning holder, insert type, MVJNL | BI01010001010000000000000515BI0100001158 | 4 | Nos |
48 | 1.47 | D-Insert VNMG | BI01010001010000000000000515BI0100001159 | 20 | Nos |
49 | 1.48 | E-External turning holder, insert type, PDJNR | BI01010001010000000000000515BI0100001160 | 4 | Nos |
50 | 1.49 | F-Insert DNMG | BI01010001010000000000000515BI0100001161 | 20 | Nos |
51 | 1.5 | G-Threading Holder - External, LH | BI01010001010000000000000515BI0100001162 | 4 | Nos |
52 | 1.51 | H-Insert 0.5 to 2 | BI01010001010000000000000515BI0100001163 | 20 | Nos |
53 | 1.52 | I-Threading Holder - Internal, LH | BI01010001010000000000000515BI0100001164 | 4 | Nos |
54 | 1.53 | J-Insert 0.5 to 2 | BI01010001010000000000000515BI0100001165 | 20 | Nos |
55 | 1.54 | K-Grooving Holder External, LH | BI01010001010000000000000515BI0100001166 | 4 | Nos |
56 | 1.55 | L-Insert 3 mm | BI01010001010000000000000515BI0100001167 | 20 | Nos |
57 | 1.56 | M-Grooving Holder Internal, LH | BI01010001010000000000000515BI0100001168 | 4 | Nos |
58 | 1.57 | N-Insert 3 mm | BI01010001010000000000000515BI0100001169 | 20 | Nos |
59 | 1.58 | O-Parting off Holder for insert width 2 mm, LH | BI01010001010000000000000515BI0100001170 | 4 | Nos |
60 | 1.59 | P-Insert 2 mm | BI01010001010000000000000515BI0100001171 | 20 | Nos |
61 | 1.6 | Q-Boring holder SCLCL for minimum bore dia. 12 mm | BI01010001010000000000000515BI0100001172 | 4 | Nos |
62 | 1.61 | R-Insert WCMT | BI01010001010000000000000515BI0100001173 | 40 | Nos |
63 | 1.62 | S-Boring holder SCLCL for minimum bore dia. 16 mm | BI01010001010000000000000515BI0100001174 | 4 | Nos |
64 | 1.63 | T-Insert CCMT | BI01010001010000000000000515BI0100001175 | 40 | Nos |
65 | 1.64 | U-Internal grooving holder LH, for minimum bore dia. 12 mm | BI01010001010000000000000515BI0100001176 | 4 | Nos |
66 | 1.65 | V-Insert 2 mm | BI01010001010000000000000515BI0100001177 | 20 | Nos |
67 | 1.66 | W-Internal threading holder LH, for minimum bore dia. 12 mm | BI01010001010000000000000515BI0100001178 | 4 | Nos |
68 | 1.67 | X-Insert 3 mm | BI01010001010000000000000515BI0100001179 | 20 | Nos |
69 | 1.68 | Y-Insert drill 12.7 mm | BI01010001010000000000000515BI0100001180 | 4 | Nos |
70 | 1.69 | Z-Suitable insert | BI01010001010000000000000515BI0100001181 | 20 | Nos |
71 | 1.7 | AA-Reducing sleeves for internal holders - Dia 12 and 16 mm | BI01010001010000000000000515BI0100001182 | 2 | Nos |
72 | 1.71 | AB-Centre drill HSS A 2.5 x 6.3 | BI01010001010000000000000515BI0100001183 | 4 | Nos |
73 | 1.72 | AC-Twist drill HSS straight shank, dia 6,8,10,12 mm | BI01010001010000000000000515BI0100001184 | 4 | Nos |
74 | 1.73 | AD-Collets suitable for the above drills | BI01010001010000000000000515BI0100001185 | 4 | Nos |
75 | 1.74 | AE-Collet Holder | BI01010001010000000000000515BI0100001186 | 4 | Nos |
76 | 1.75 | AF-Boring bar holder | BI01010001010000000000000515BI0100001187 | 6 | Nos |
77 | 1.76 | Caliper transfer inside | BI01010001010000000000000515BI0100001188 | 6 | Nos |
78 | 1.77 | Micrometer Outside | BI01010001010000000000000515BI0100001189 | 4 | Nos |
79 | 1.78 | Micrometer Outside | BI01010001010000000000000515BI0100001190 | 4 | Nos |
80 | 1.79 | Micrometer Outside | BI01010001010000000000000515BI0100001191 | 4 | Nos |
81 | 1.8 | Micrometer Inside | BI01010001010000000000000515BI0100001192 | 4 | Nos |
82 | 1.81 | Micrometer Inside | BI01010001010000000000000515BI0100001193 | 4 | Nos |
83 | 1.82 | Depth Gauge Micrometer | BI01010001010000000000000515BI0100001194 | 4 | Nos |
84 | 1.83 | Vernier Caliper Outside, Inside and Depth | BI01010001010000000000000515BI0100001195 | 12 | Nos |
85 | 1.84 | Dial Vernier Caliper with metric | BI01010001010000000000000515BI0100001196 | 12 | Nos |
86 | 1.85 | Vernier Bevel Protractor | BI01010001010000000000000515BI0100001197 | 12 | Nos |
87 | 1.86 | Vernier Micrometer | BI01010001010000000000000515BI0100001198 | 4 | Nos |
88 | 1.87 | Vernier Micrometer | BI01010001010000000000000515BI0100001199 | 4 | Nos |
89 | 1.88 | Vernier Micrometer | BI01010001010000000000000515BI0100001200 | 4 | Nos |
90 | 1.89 | Gauge Feeler | BI01010001010000000000000515BI0100001201 | 2 | Nos |
91 | 1.9 | Gauge - Radius Set | BI01010001010000000000000515BI0100001202 | 12 | Nos |
92 | 1.91 | Centre Gauge | BI01010001010000000000000515BI0100001203 | 4 | Nos |
93 | 1.92 | Screw Pitch Gauge | BI01010001010000000000000515BI0100001204 | 4 | Nos |
94 | 1.93 | Drill Angle Gauge | BI01010001010000000000000515BI0100001205 | 4 | Nos |
95 | 1.94 | Universal Dial Test Indicator - Plunger Type | BI01010001010000000000000515BI0100001206 | 4 | Nos |
96 | 1.95 | Vernier Height Gauge | BI01010001010000000000000515BI0100001207 | 2 | Nos |
97 | 1.96 | Wheel Dresser Hunting on-type with star cutter | BI01010001010000000000000515BI0100001208 | 2 | Nos |
98 | 1.97 | Wheel Dresser Diamond | BI01010001010000000000000515BI0100001209 | 4 | Nos |
99 | 1.98 | Screw Thread micrometer interchangeable | BI01010001010000000000000515BI0100001210 | 2 | Nos |
100 | 1.99 | Morse Taper Plug & Ring Gauge | BI01010001010000000000000515BI0100001211 | 2 | Nos |
101 | 2 | Sine Bar with centers | BI01010001010000000000000515BI0100001212 | 4 | Nos |
102 | 2.01 | Slip Gauge metric set | BI01010001010000000000000515BI0100001213 | 4 | Nos |
103 | 2.02 | Coventry Die head | BI01010001010000000000000515BI0100001214 | 4 | Nos |
104 | 2.03 | Magnetic Chuck | BI01010001010000000000000515BI0100001215 | 2 | Nos |
105 | 2.04 | Coventry Type Die Head ( Self opening ) | BI01010001010000000000000515BI0100001216 | 2 | Nos |
106 | 2.05 | Bore dial gauge stems | BI01010001010000000000000515BI0100001217 | 2 | Nos |
107 | 2.06 | Lathe S.S & S.C.(all geared head stock) with\nminimum specification as: | BI01010001010000000000000515BI0100001218 | 10 | Nos |
108 | 2.07 | Lathe S.S & S.C.(all geared type) with\nminimum specification as: | BI01010001010000000000000515BI0100001219 | 2 | Nos |
109 | 2.08 | Lathe tool room S.S. & S.C. (all geared type)\nwith minimum specification as: | BI01010001010000000000000515BI0100001220 | 2 | Nos |
110 | 2.09 | Grinding machine pedestal type | BI01010001010000000000000515BI0100001221 | 2 | Nos |
111 | 2.1 | Drill machine pillar type-motorized | BI01010001010000000000000515BI0100001222 | 2 | Nos |
112 | 2.11 | Power saw machine – hydraulic feed system | BI01010001010000000000000515BI0100001223 | 2 | Nos |
113 | 2.12 | CNC lathe/CNC turn Centre | BI01010001010000000000000515BI0100001224 | 2 | Nos |
114 | 2.13 | Air Conditioner - Split - 2.0 Ton | BI01010001010000000000000515BI0100001225 | 2 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail