Road Safety Work For Road To Nagpur Katol Road Nh 353 J In Km 7 . 00 To 54 . 00 District Nagpur In The State Of Maharashtra, Katol Dist. Nagpur-Maharashtra
TDR : 25566780
Tender Notice
BOQ
Expired
Katol Dist. Nagpur
Maharashtra
Road Safety Work For Road To Nagpur Katol Road Nh 353 J In Km 7 . 00 To 54 . 00 District Nagpur In The State Of Maharashtra
Name of Work: Road safety Work For Road to Nagpur Katol Road NH 353- J in Km 7/00 to 54/00 District Nagpur in the state of Maharashtra.
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retroreflectance of the reflecting panel, to the Engineer.
346.27
1730
No.
2
2
Providing and fixing Cautionary/ Warning sign boards in Equilateral Triangle size of 900 mm made out of 4mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. SSR 2019-20 it.no.6.30(f) P. no 71
16.583
36
No.
3
3
Providing and fixing of retro- reflectorised informatory sign board rectangular / Square in shape having area greater than 0.9 square meter made out of 4 mm aluminum Composite Panel sheet bonded with white retro reflective sheeting of Class C ( Type XI micro-prismatic grade sheeting) having pressure sensitive/heat activated adhesive retroreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 5mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. SSR 2019-20 it.no.6.34(d) P. no 75
40.8
Sqm.
4
4
Providing & Fixing Speed Bumps / Speed Breakers made up of ABS Plastic & PU Material and black & yellow Colour of Size 250mm x 350mm x 50mm with both sides reflector, anti dash skid, UV Resistant, Moisture & temperature Resistant filled with concrete, pasting the adhesive epoxy at bottom and fitting with spikes
108
Sqm.
5
5
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thickincluding reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes complete. SSR 2019-20 it.no.6.12(a) P. no 63
1131
Sqm.
6
6
Providing laying, spreading and compacting hard murum having PI < 6, including spreading in uniform layers on a prepared surface and compacting with Static roller having weight 8 to 10 MT including necessary artificial watering all materials, labour, machinery, guarding, barracating complete with all leads and lifts of all materials etc. complete. SSR 2019-20 it.no.2.29(a),2.30,2.31 P. no 37
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
