Design , Construction And Retrofitting Of Pwss Under Jjm At Village 1 . Khadotia 2 Sundarabad 3 Ingoria 4 Salwa 5 Aslawada Block Badnagar Including Construction Of Oht , Sumpwells , Laying And Jointing Of Pipe Line Etc . Complete
Tender Overview
Project Description
Design , Construction And Retrofitting Of Pwss Under Jjm At Village 1 . Khadotia 2 Sundarabad 3 Ingoria 4 Salwa 5 Aslawada Block Badnagar Including Construction Of Oht , Sumpwells , Laying And Jointing Of Pipe Line Etc . Complete
BOQ
| Name of Work:Design and Construction of Retrofitting work of water supply schemes under jal Jivan Mission at Village 1. KHADOTIA 2. SUNDARABAD 3.INGORIA 4. SALWA 5.ASLAWADA of Block BADNAGAR Distt. UJJAIN based on underground sources including construction of R.C.C. sump wells, R.C.C. over head tanks, providing and installation of pumps at under ground sources and sumps, providing, laying & jointing of pumpingmain and distribution pipe lines, household tap connections and electric power connections including cost of all material & labour alongwith 90 days successful trial run of all schemes as per detailed scope of work | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 m lead as per direction of engineer-in- charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) USOR. Item.no.16.15.1-P.no.209 | 221 | Cum | |
| 2 | 1.02 | Earth work in Excavation for pipe trench in all kinds of soil and WBM in areas including dressing, watering and ramming and disposal of Excavated earth lead upto 50 meters and lift upto 1.5m, disposal earth to be leveled, neatly dressed. USOR. Item.no. 16.4 -P.no.207 | 1945 | Cum | |
| 3 | 1.03 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including disposal of excavated earth,lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. Soft rock with or without blasting or bituminous pavement /cement concrete road (a)In ordinary or Soft rock with or without blasting or bituminous pavement /cement concrete road. USOR. Item.no. 16.4 -P.no.207 | 826.5 | Cum | |
| 4 | 1.04 | Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.122\n90 mm dia HDPE 10 Kg/cm² | 650 | mtr | |
| 5 | 1.05 | Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.122\n90 mm dia HDPE 6 Kg/cm² | 6800 | Mtr | |
| 6 | 1.06 | Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.122\n110 mm dia HDPE 6 Kg/cm² | 2600 | Mtr | |
| 7 | 1.07 | Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.122\n110 mm dia HDPE 10 Kg/cm² | 800 | Mtr | |
| 8 | 1.08 | Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment, making string of new pipe material, installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing, reaming and pulling back the new pipe on the designed bore path alignment, proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting indian conditions. Required pipes/ specials and other civil work shall be paid separately-in all types of soils. (This item shall be executed only after prior permission of Superintending Engineer)\n USOR. Item.no. 16.3 -P.no.207\nHDPE pipe of any class-90 mm outer dia | 2700 | Mtr. | |
| 9 | 1.09 | Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment, making string of new pipe material, installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing, reaming and pulling back the new pipe on the designed bore path alignment, proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting indian conditions. Required pipes/ specials and other civil work shall be paid separately-in all types of soils. (This item shall be executed only after prior permission of Superintending Engineer)\n USOR. Item.no. 16.3 -P.no.207\nHDPE pipe of any class-110 mm outer dia | 1600 | Mtr. | |
| 10 | 1.1 | Providing and laying HDPE Bend 90º confirming to IS specifications. USOR.Item.no.9.2 -P.no.122\n90 mm dia HDPE 6 Kg/cm² | 20 | Each | |
| 11 | 1.11 | Providing and laying HDPE Bend 90º confirming to IS specifications. USOR.Item.no.9.2 -P.no.122\n110 mm dia HDPE 6 Kg/cm² | 11 | Each | |
| 12 | 1.12 | Providing and laying HDPE Bend 90º confirming to IS specifications. USOR.Item.no.9.2 -P.no.122\n110 mm dia HDPE 10 Kg/cm² | 4 | Each | |
| 13 | 1.13 | Providing and laying HDPE Bend 90º confirming to IS specifications. USOR.Item.no.9.2 -P.no.122\n90 mm dia HDPE 10 Kg/cm² | 4 | Each | |
| 14 | 1.14 | Providing and laying HDPE Bend 45º confirming to IS specifications. USOR.Item.no.9.2 -P.no.123\n90 mm dia HDPE 6 Kg/cm² | 14 | Each | |
| 15 | 1.15 | Providing and laying HDPE Bend 45º confirming to IS specifications. USOR.Item.no.9.2 -P.no.123\n110 mm dia HDPE 6 Kg/cm² | 9 | Each | |
| 16 | 1.16 | Providing and laying Equal HDPE Tee confirming to IS specification USOR.Item.no.9.4 -P.no.123\n90 mm dia HDPE 6 Kg/cm² | 23 | Each | |
| 17 | 1.17 | Providing and laying Equal HDPE Tee confirming to IS specification USOR.Item.no.9.4 -P.no.123\n110 mm dia HDPE 6 Kg/cm² | 12 | Each | |
| 18 | 1.18 | Providing and laying Equal HDPE Tee confirming to IS specification USOR.Item.no.9.4 -P.no.123\n110 mm dia HDPE 10 Kg/cm² | 4 | Each | |
| 19 | 1.19 | Providing and laying Equal HDPE Tee confirming to IS specification USOR.Item.no.9.4 -P.no.123\n90 mm dia HDPE 10 Kg/cm² | 4 | Each | |
| 20 | 1.2 | Providing and laying HDPE Reducer: confirming to IS specifications.USOR.Item.no. 9.6 -P.no.124\n110 - 90 mm 6 Kg/sq cm. | 19 | Each | |
| 21 | 1.21 | Providing and laying including testing Pipe end confirming to IS specification.USOR.Item.no. 9.5-P.no.123\n90 mm dia HDPE 6 Kg/cm² | 24 | Each | |
| 22 | 1.22 | Providing and laying including testing Pipe end confirming to IS specification.USOR.Item.no. 9.5-P.no.123\n110 mm dia HDPE 6 Kg/cm² | 16 | Each | |
| 23 | 1.23 | Providing and laying including testing Pipe end confirming to IS specification.USOR.Item.no. 9.5-P.no.123\n110 mm dia HDPE 10 Kg/cm² | 5 | Each | |
| 24 | 1.24 | Providing and laying HDPE End Cap confirming to IS specifications. USOR Item.no. 9.8 -P.no.124\n90 mm - 6Kg /cm² | 56 | Each | |
| 25 | 1.25 | Providing and laying HDPE End Cap confirming to IS specifications. USOR Item.no. 9.8 -P.no.124\n110mm - 6Kg /cm² | 20 | Each | |
| 26 | 1.26 | Providing butt fusion welded joint/joining by heating to the ends with the help of Teflon coated electric mirror/heater ends together etc. by thermosetting processes to HDPE Pipe\nand specials. (6 kg. 8 kg. 10 kg.) (50 mm & above fusion jointed & below 50 mm mechanical jointed) including testing\n USOR Item.no. 9.9 -P.no.125 90 mm - 6Kg /cm² | 50 | Each | |
| 27 | 1.27 | Providing butt fusion welded joint/joining by heating to the ends with the help of Teflon coated electric mirror/heater ends together etc. by thermosetting processes to HDPE Pipe\nand specials. (6 kg. 8 kg. 10 kg.) (50 mm & above fusion jointed & below 50 mm mechanical jointed) including testing\n USOR Item.no. 9.9 -P.no.125 110mm - 6Kg /cm² | 50 | Each | |
| 28 | 1.28 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Couple USOR Item.no. 9.14.1 P.no.129 \n90 mm USOR Item.no. 9.14.1.8 P.no.129 | 53 | Each | |
| 29 | 1.29 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Couple USOR Item.no. 9.14.1 P.no.129 \n110 mm USOR Item.no. 9.14.1.9 P.no.129 | 20 | Each | |
| 30 | 1.3 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Equal Tee USOR Item.no. 9.14.2 P.no.130 \n90 mm USOR Item.no. 9.14.2.8 P.no.130 | 19 | Each | |
| 31 | 1.31 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Equal Tee USOR Item.no. 9.14.2 P.no.130 \n110 mm USOR Item.no. 9.14.2.9 P.no.130 | 9 | Each | |
| 32 | 1.32 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Elbow 900 USOR Item.no. 9.14.3 \nP.no.130 \n90 mm USOR Item.no. 9.14.2.8 P.no.130 | 18 | Each | |
| 33 | 1.33 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Elbow 900 USOR Item.no. 9.14.3 P.no.130 \n110 mm USOR Item.no. 9.14.2.9 P.no.130 | 8 | Each | |
| 34 | 1.34 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Reducer USOR Item.no. 9.14.4 P.no.131 \n110 X 90 mm USOR Item.no. 9.14.4.13 P.no.131 | 13 | Each | |
| 35 | 1.35 | Spigot Long Neck Pipe End (Stub End) for Electro Fusion Joint USOR Item.no. 9.14.6 P.no.132 \n90 mm USOR Item.no. 9.14.6.3 P.no.132 | 5 | Each | |
| 36 | 1.36 | Spigot Long Neck Pipe End (Stub End) for Electro Fusion Joint USOR Item.no. 9.14.6 P.no.132 \n110 mm USOR Item.no. 9.14.6.4 P.no.132 | 5 | Each | |
| 37 | 1.37 | Providing and fixing G. I. threaded Flange in G.I. Pipe line i/c cutting threading testing etc.\ncomplete (New work) confirming to IS 1879, 50 mm dia USOR Item.no. 6.39P.no.99\n80 mm dia | 66 | Each | |
| 38 | 1.38 | Providing and fixing G. I. threaded Flange in G.I. Pipe line i/c cutting threading testing etc. complete (New work) confirming to IS 1879, 50 mm dia USOR Item.no. 6.39P.no.99\n100 mm dia | 22 | Each | |
| 39 | 1.39 | Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete CLASS PN- 10 USOR Item.no. 4.41 P.no.71,\n100 mm | 11 | Each | |
| 40 | 1.4 | Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete CLASS PN- 10 USOR Item.no. 4.41 P.no.71,\n80 mm | 33 | Each | |
| 41 | 1.41 | Providing & fixing following cast iron double flanged single door reflux (non return) valves including jointing & testing with cost of jointing material such as bolts,nuts and rubber insertion all complete as per IS :5312 (Part I) CLASS PN- USOR. Item.no.8.4a -P.no 113\n100 mm dia | 8 | each | |
| 42 | 1.42 | Providing & fixing following cast iron double flanged single door reflux (non return) valves including jointing & testing with cost of jointing material such as bolts,nuts and rubber insertion all complete as per IS :5312 (Part I) CLASS PN- USOR. Item.no.8.4a -P.no 113\n80 mm dia | 5 | Each | |
| 43 | 1.43 | Construction of Brick masonary valve chamber with 20 cm thick wall in 1:6 C.M. with 12mm thick 1:4 Cement Plaster and base course 10 cm. thick in M-15. Inside Dimensions 110x80x100cm M-20 RCC chamber cover size 130x100cmx120cm including cost of materials, labour etc. complete.USOR. Item.no.17.12.-P.no. 226\nM-20 RCC chamber cover size 130x100cmx120cm including cost of materials, labour etc. complete..USOR. Item.no.17.45.1.-P.no. 29 | 12 | Each | |
| 44 | 1.44 | Heavy Duty SFRC chamber cover with frae size 150cmx120cmx10cm including cost of materials, labour etc.\ncomplete..USOR. Item.no.17.45.2-P.no. 29 | 7 | Each | |
| 45 | 1.45 | Construction of Brick masonry valve chamber with 20 cm thick wall in 1:6 C.M. with 12mm thick 1:4 Cement Plaster and base course 10 cm. thick in M-15. Inside Dimensions 90x60x100cm with - M-20 RCC chamber cover size 130cm x 100cm x 12cm including cost of materials, labour etc. complete Item.no.17.45.1-P.no. 29 | 13 | Each | |
| 46 | 1.46 | Heavy Duty SFRC chamber cover with frame size 130cm x\n100cm x 10cm including cost of materials, labour etc.\ncomplete Item.no.17.45.2-P.no. 29 | 7 | Each | |
| 47 | 1.47 | Filling available excavated earth in trenches, lead up to 50m and lift upto 1.5 m in all kind of soil excluding watering and ramming. USOR. Item.no. 16.10b -P.no 208 | 2728 | Cum | |
| 48 | 1.48 | Providing and fixing of ISI marked PVC insulated three core flat copper cable..USOR.Item.no. 24.20.102-P.no 265\n6 Sq mm | 1940 | mtr | |
| 49 | 1.49 | Labour only for lowering of three phase submersible pumping set in the tube well with pipe line assembly, electrical cable, testing etc. complete including connecting the electrical cable from pump & starter .USOR. Item.no.24.13.4.ii -P.no 258\nAbove 7.5 HP to 12.5 HP - Depth up to 150 mtr. | 6 | Job | |
| 50 | 1.5 | Labour only for taking out of three phase submersible pumping set from the tube well with pipe line assembly, electrical cable, testing etc. complete including disconnecting the electrical cable from pump & starter ..USOR. Item.no.24.18.3.ii -P.no 258 Above 7.5 HP to 12.5 HP - Depth up to 150 mtr. | 6 | job | |
| 51 | 1.51 | Providing and jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes & heavy duty sockets and jointing materials all complete. Pipes and sockets confirming to IS:1239-2011 Part-II.USOR. Item.no.17.38.1-P.no. 3\n50 mm dia M Class | 960 | R Mtr | |
| 52 | 1.52 | Providing and jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes & heavy duty sockets and jointing materials all complete. Pipes and sockets confirming to IS:1239-2011 Part-II.USOR. Item.no.17.38.2-P.no. 3\n65 mm dia M Class | 60 | R Mtr | |
| 53 | 1.53 | Providing and laying mechanically mixed cement concrete with crushed stone aggregate excluding centering and shuttering (with 20 mm nominal sizegraded stone aggregate) M-20 USOR. Item.no.16.23a.iii.-P.no. 210 | 221 | cum | |
| 54 | 1.54 | Steel work in welded built-up section/ framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers treads landings etc. of stair cases including use of chequered plate wherever required all complete USOR. Item.no.16.25d(i).-P.no. 212 | 330 | kg | |
| 55 | 1.55 | Provision for inter connection of old to new pipe line with excavation of trench as per requirement of any diameter & type of pipe line in muddy area i/c dewatering the trench laying & jointing of pipe and specials, back filling the trench i/c testing of joints cost of labour & specials such as D- Joins couplers, solvent cement etc, complete job work as per approved specification and as directed by Engineer in charge . 90 mm / 110 mm | 24 | each | |
| 56 | 1.56 | Supplying & Installation of Energy efficiant five star BEE rating ISI Marked required capacity of Three Phase, 50 Hz, 415V, deep well submersible pump Steel body, suitable for 6\"tube well with Control Panel Starter suitable for Submersible pump with dry run protection, single phase preventer, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe and connection cable.. 10 H.P. with 20 stages, Head Mt. 184-80 Discharge\nLPM 60-270 USOR. Item.no.24.20.106(ix)- P.no. 268 | 6 | No | |
| 57 | 1.57 | Supply & errection of ready made mini pump house (control pannel box) GI sheet of 18 gauge of size 90cmx90cmx60cm with 40x40x5mm angle Iron frame to fix it 200 mm below ground level with hold fasts grouted in foundation and 300 mm above ground level for clearance suitable for fixing of conrol pannel, fuse unit, main switch etc. as per aproved specification. | 6 | Each | |
| 58 | 1.58 | Provision for Jointing of TW to Rising Main with cost of Material/ specials such as GI Union / CI Flange, GI Reducer UPVC MTA FTA etc. as per requiement of site i/c cost of labour etc. complete as per approved specification and as directed by Engineer in charge.USOR. Item.no.17.19.-P.no. 228 | 8 | Job | |
| 59 | 1.59 | Provision for jointing of Rising main to supmp well/OHT and OHT to Distribution pipe line with cost of material/specials such as Bends, MTA as per rerquirement of site i/c cost of labour with excavation, labour as per requirement complete as per approved\nspecification and as directed by Engineer in charge. USOR. Item.no.17.20.-P.no. 229 | 6 | Job | |
| 60 | 1.6 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items. ( Item no. 17.41.) For connection with 20 mm dia MDPE pipe upto 5 meter and CONCRETE ROAD CROSSING is necessary. ( Item no. 17.41.1) | 145 | No | |
| 61 | 1.61 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items. ( Item no. 17.41.) For connection with 20 mm dia MDPE pipe more than 5 meter & upto 10 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary ( Item no. 17.41.5) | 97 | No | |
| 62 | 1.62 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items. ( Item no. 17.41) For connection with 20 mm dia MDPE pipe upto 5 meter and road crossing is not required. (Distribution pipe line is on the same side of house) ( Item no. 17.41.3) | 145 | No | |
| 63 | 1.63 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items. ( Item no. 17.41.) For connection with 20 mm dia MDPE pipe upto 5 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary. ( Item no. 17.41.4) | 50 | No | |
| 64 | 1.64 | Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items. ( Item no. 17.41.) For connection with 20 mm dia MDPE pipe more than 5 meter & upto 10 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary ( Item no. 17.41.5) | 49 | No | |
| 65 | 1.65 | Design, drawing, construction, testing and commissioning of\nGSR/Sumpwell of following capacities with all necessary fitting and accessories as mentioned in the relevant chapter of USOR, IS codes and departmental circulars. Complete turn\nkey job for following capacities :- 20 kl USOR. Item.no. 26.2.1 p.no17 | 1 | job | |
| 66 | 1.66 | Design, drawing, construction, testing and commissioning of Elevated Service Reservoir/ Over Head Tank (ESR/OHT) 50 KL /12 Mtr Stagging with all necessary fitrjng as mentioned in relevant chapter of IJSOR. IS codes and departmental guidelines. Complere rum key job for following capacities wirh 9/12/15m mtr staging \nfrom Gl :- | 1 | job | |
| 67 | 1.67 | Design and Construction of RCC framed brick masonry pump house over the sump with all necessary fitting and requirement as mentioned in relevant chapter of USOR, IS codes and departmental guidelines. Complete turn key job. This item will only be used with item no 26.2 only in cases where pumphouse to be constructed above the proposed sumpwell USOR. Item.no. 26.3 p.no18 | 1 | job | |
| 68 | 1.68 | Supplying and installation of energy efficient 5 star rated BEE rating ISI marked required capacity three phase centrifugal mono block inline booster pump set excluding cable. 15-20 M head and 350 LPM TO 270 LPM , 2 H.P USOR I.no. 17.37.3 p.no. 3 | 5 | no. | |
| 69 | 1.69 | Fabrication, providing and fixing of typical information board\nof size 2.40 m x 1.80 m made out as detailed below - 1. Three vertical support made out from 100 mm x 50 mm , 6.0 mm thick channel. This shall be minimum 1.0 m below GL and 3.00 m above GL. The Channel shall be erected on 600 mm x 600 mm x 1000 mm foundation blocks at appropriate depth made of cement concrete 1:2:4. 2.The board shall be fabricated from 1.6 mm thick MS sheet of size 2.40 m x 1.80 m, The frame of board shall be fabricated with 50 mm x 50 mm x 5 thick angle with one horizontal additional support in center with same angle. 3. Whole structure shall be painted by standard color with lettering border, heading and logo etc using synthetic enamel paint of superior quality including welding, excavation, concreting , painting of base, border and lettering, painting and other required details etc complete as directed by Engineer in charge. USOR I.no. 17.47 p.no. 7 | 5 | no. | |
| 70 | 1.7 | Supplying & Installation of Five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415V, Open well Submersible pump, with Control Panel Starter with Dry Run Protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable. 5.0 H.P. Head Mt.15-24, Discharge LPM 930-420. (USOR. Item. No.24.20.112 (ii) - P.No. 268) | 6 | job | |
| 71 | 1.71 | Providing and installation of automatic water level indicator for supervisory control cum auto on/off of motor pump assembly inclusive of control panel ,500 mtr long 2 core ,4 pair cable for small rural water supply scheme, having source within 500mtr as per approved specification and as directed by Engineer in charge.(In case of lesser length of cable,equivalent amount @ Rs 12 /-per meter of short length will be deducted from above rate) USOR I.No. 17.11 P.No.226 | 5 | job | |
| 72 | 1.72 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) - All kinds of soil USOR. Item. No 2.6 /22 \n | 14.4 | Mtr. | |
| 73 | 1.73 | Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. - Ordinary rock\nUSOR. Item. No 2.7.1/22 | 3.6 | Nos. | |
| 74 | 1.74 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc. complete.\nThermo-Mechanically Treated bars.(TMT) USOR. Item. No 5.16.6 / 68 | 429.44 | Kg | |
| 75 | 1.75 | Reinforced cement concrete work (with 20mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and up to floor two level excluding cost of centering, shuttering, finishing and reinforcement : \nM 20 -Grade Concrete USOR. Item. No 5.2.1 / 65 | 5.89 | Cum | |
| 76 | 1.76 | Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters butteresses, plinth beams and string courses etc.up to plinth level. USOR. Item. No 5.9 / 66 | 23.52 | Sqm | |
| 77 | 1.77 | Lintels, beams, girders, bressumers and cantilevers. - Coping sides USOR. Item. No 5.9.5 / 66 | 5.52 | Sqm | |
| 78 | 1.78 | Foundations, footings, bases of columns, etc. for concrete up to plinth level.USOR. Item. No 5.9.1/66\n | 16.8 | Sqm | |
| 79 | 1.79 | Columns, Pillars, Piers, Abutments, Posts and Struts. USOR. Item. No 5.9.6 / 66 | 12.96 | Sqm | |
| 80 | 1.8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :With 20mm nominal size graded stone aggregate.Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10)\nUSOR. Item. No 4.1.1.4/45\n | 1.2 | Cum | |
| 81 | 1.81 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters,columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. up to floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate\nM 20 - Grade concrete - Coping USOR. Item. No | 0.55 | cum | |
| 82 | 1.82 | Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorpt ion not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete.\nCement Mortar 1:6 (1 cement : 6 sand) USOR. Item. No 4.2.1.2 / 45 | 7.45 | cum | |
| 83 | 1.83 | 12 mm cement plaster of mix :\n1:6 (1 cement : 6 sand) USOR. Item. No 13.1.2 / 244 | 111 | Sqm | |
| 84 | 1.84 | Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). USOR. Item. No 13.55.1 / 250 | 111 | sqm | |
| 85 | 1.85 | Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. USOR. Item. No 2.25/26\n | 13.4 | cum | |
| 86 | 1.86 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of\nsides and ramming of bottom disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) - All kinds of soil\n | 4.8 | Mtr. | |
| 87 | 1.87 | Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. - Ordinary rock\n | 1.2 | Nos. | |
| 88 | 1.88 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc. complete.\nThermo-Mechanically Treated bars.(TMT) USOR. Item. No 5.16.6 / 68 | 122.74 | KG | |
| 89 | 1.89 | Reinforced cement concrete work (with 20mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and up to floor two level excluding cost of centering, shuttering, finishing and reinforcement : \nM 20 -Grade Concrete | 1.91 | Cum | |
| 90 | 1.9 | Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters butteresses, plinth beams and string courses etc.up to plinth level.\nFoundations, footings, bases of columns, etc. for concrete up to plinth level.\n | 7.2 | sqm | |
| 91 | 1.91 | Columns, Pillars, Piers, Abutments, Posts and Struts. | 6.48 | Sqm | |
| 92 | 1.92 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :With 20mm nominal size graded stone aggregate.Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10)\n\n | 0.4 | Cum | |
| 93 | 1.93 | Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). | 8.4 | Sqm | |
| 94 | 1.94 | Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.\n | 4.21 | Cum | |
| 95 | 1.95 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete.\n | 300 | Kg | |
| 96 | 1.96 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand\nand manufacture.\n\n | 9 | Sq.M. | |
| 97 | 1.97 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in charge . | 675 | Sq.M. | |
| 98 | 1.98 | Supplying and filling in plinth with hard muram/hard copra under floors including watering ramming cosolidating in layers not exceeding 20cm in depth and dressing complete.\n | 84.38 | Cum | |
| 99 | 1.99 | 11 KV line on 140 kg. 8.0 Mtrs. long PCC Poles with rabbit conductor average span of 70 mtr. in rural area. (Schedule Ref. C-1.2 of MPMKVVCL for SOR) | 1.69 | Km | |
| 100 | 100 | 11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for tapping DP. (Schedule Ref. C-2.2 of MPMKVVCL for SOR) | 5 | Each | |
| 101 | 101 | L.T. Line 1 phase 3 wire on PCC support using Aerail Bunched XLPE cable with maximum span of 50 Meter. (Schedule Ref. D-3.2 of MPMKVVCL for SOR)\n2 x 35+ 1 x 16 sq. mm (Insulated nuetral massenger) | 1.69 | Km | |
| 102 | 102 | 11/0.4 KV out-door type transformer sub-station. (Schedule Ref. E-1.2 of MPMKVVCL for SOR)\n25 KVA on 140 kg. 8.0 meter long PCC Pole | 6 | Each |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender