Military Engineer Services-MES has published Day To Day Petty B R Repair To Joinery Flooring Wc Bathroom Plumbing Sanitary Fitting Ac Sheets Rehabilitation And Other Connected Items At Zone A C D And E Under Age B R I In Ge Gomantak Vasco. Submission Date for this Tender is 15-10-2020. Plumbing and Sanitary Work Tenders in VASCO DA GAMA Goa. Bidders can get complete Tender details and download the document.
| Name of Work : DAY TO DAY PETTY B/R REPAIR TO FLOORING ,WC/BATH ROOM,PLUMBING,SANITARY FITTING,AC SHEETS,JOINERY,REHABILIATION AND OTHER CONNECTED ITEMS AT ZONE A,C,D,E UNDER AGE B/R-I GOMANTAK VASCO | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. | 112 | 300 | Sqm |
| 2 | 2 | M&L 15 mm thick plastering in CM 1:4 on surfaces other than fair face of brick work/concrete surfaces (in wall,shafts) finished even and smooth without using extra cement including water proofing compound mixed with cement as per manufacturers all as directed by Engineer-in-Charge.\n Note : Water proofing compund shall be measured and paid for separately | 113 | 100 | Sqm |
| 3 | 3 | Suppy only liquid water proofing (Compound) (Make:Dr fixit / Sika / Fosroc) | 114 | 7 | Ltr |
| 4 | 4 | Material and labour for rendering 10 mm thick on brick or concrete surfaces in CM 1:4 finished even and fair with out using extra cement. | 115 | 100 | Sqm |
| 5 | 5 | M & L 5 mm thick rendering in cement mortar 1:3 on brick work or concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and directed. | 116 | 100 | Sqm |
| 6 | 6 | M&L for applying two coats of Anti fungal paint-APEX painting over a coat of primer to match the existing colour including preparation of newly plastered surface of walls all as directed by Engr-in-Charge. | 117 | 100 | Sqm |
| 7 | 7 | M&L for 3mm thick white wall care putty on wall and applying two coat of oil bond distember complete all as specified and directed | 118 | 100 | Sqm |
| 8 | 8 | M & L for applying three coats of white wash including preparation of newly plastered surfaces of ceiling | 119 | 100 | Sqm |
| 9 | 9 | M & L for applying one coat of white wash including preparation of old plastered surfaces of wall. | 120 | 200 | Sqm |
| 10 | 10 | All as per serial item No 09 above but on ceilings. | 121 | 100 | Sqm |
| 11 | 11 | M&L preparation of old decorated surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper of any tint/shade complete all as specified.\n | 122 | 200 | Sqm |
| 12 | 12 | M&L preparation of old painted surfaces of wooden /wood based materials of any description , not otherwise described ,over 10 cm width or girth and applying one coat with synthetic enamel paint complete all as specified and directed. | 123 | 100 | Sqm |
| 13 | 13 | M&L preparation of old painted steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.\n\n | 124 | 50 | Sqm |
| 14 | 14 | M&L one coats of exterior emulsion paint ( Apex or weather coat) , white or tinted on old surfaces of walls including prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .\n\n | 125 | 100 | Sqm |
| 15 | 15 | Taking down wooden Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified. | 126 | 5 | Each |
| 16 | 16 | Taking down wooden Chowkhats or frames exc. 1.5 sq.m but n.exc 4.0 sqm each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified. | 127 | 15 | Each |
| 17 | 17 | Taking down shutters of any description exc 1 sqm but n. exc 2 sqm each | 128 | 25 | Each |
| 18 | 18 | S &F 2nd class H/W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints all as specified. | 129 | 0.3 | CUM |
| 19 | 19 | Supplied and Fixing flush door shutters 30 mm thick,solid core construction with block board core and plywood face panels with decorative face veneers obth faces with lipping etc complete. | 130 | 10 | Sqm |
| 20 | 20 | Supplied and Fixing glazed and skeleton shuttes 30 mm thick with 2nd class hard woodstyles and rails open rebated and prepared to receive glass / wiremesh etc without sash bars, fitted with mitred beads all as specified. | 131 | 10 | Sqm |
| 21 | 21 | S&F 2nd class HW plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part-I), kiln seasoned and chemically pressure treatmed complete all as specified. | 132 | 10 | Sqm |
| 22 | 22 | M & L for two coat of sythetic enamel paint over one coat of primer on new wooden suface including prepation of surface exc. 10 cm width and girth. | 133 | 150 | Sqm |
| 23 | 23 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed . | 134 | 25 | RM |
| 24 | 24 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by GE/Engineer-in-Charge. | 135 | 8 | Sqm |
| 25 | 25 | S&F aluminium powder coated frame for partition / windows/ ventilators/doors sliding/fixed/openable type complete with necessary fittings such as two aluminium handle cum lock for each window, roller etc and fixing all as speciefied and directed by Engineer-in-Charge. | 136 | 200 | Kg |
| 26 | 26 | S&F aluminium powder coated door/windows/ventitators shutters, aluminium section weighing 0.55 kg/ m including necessary fittings such as joining cleats, glazing clips, ruber neoprene packing, hinges, a beading screws etc. complete all as specified and directed by Engineer-in-Charge. | 137 | 20 | Sqm |
| 27 | 27 | S&F aluminium powder coated grill of make DG 104(10mm thick) incl 'F'/L' channel alround grill. | 138 | 15 | Sqm |
| 28 | 28 | S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked). | 139 | 80 | EACH |
| 29 | 29 | S&F alumiunium allloy, anodized, sliding door bolt, 300 mm, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed (isi marked). | 140 | 20 | EACH |
| 30 | 30 | S & F butt hinges stainless steel medium weight 150 mm long (isi marked) | 141 | 125 | EACH |
| 31 | 31 | S & F 150 mm long Aluminium handles, cast type (ISI marked). | 142 | 70 | EACH |
| 32 | 32 | M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty. | 143 | 10 | Each |
| 33 | 33 | Supply and fixing framed work such as grills, gratigs, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters; walk ways, railings; framework of water tanks and similar work con-forming to Fe-290 Gde-E-165 | 144 | 200 | Kg |
| 34 | 34 | S/F Sheet glass 4mm thickness, ordinary quality and glazing with oil putty / rubber and aluminium beading/packing with rubber gasket in squres exc 0.50sqm in each pane all as specified and directed | 145 | 15 | sqm |
| 35 | 35 | S/F figured glass 4mm thickness, ordinary quality and glazing with oil putty in squares exc 0.50 sqm in each pane all as specified and directed | 146 | 10 | sqm |
| 36 | 36 | S&F aluminium alloy anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick complete all as specified and directed by EIC. | 147 | 25 | Sqm |
| 37 | 37 | S&F in repairs aluminium anodised barrel tower bolts of extruded section 100mm long all as specified.. | 148 | 50 | Each |
| 38 | 38 | S&F aluminium anodised barrel tower bolts of extruded section 150mm long all as specified.. | 149 | 50 | Each |
| 39 | 39 | S&F in repairs aluminium anodised barrel tower bolts of extruded section 150mm long all as specified.. | 150 | 60 | Each |
| 40 | 40 | S&F in repairs alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm complete all as specified and directed. | 151 | 30 | Each |
| 41 | 41 | S&F in repairs aluminium anodised bow handles of 150mm long fabricated type of extrded section fixed with screws to shutters complete all as specified and directed. | 152 | 40 | Each |
| 42 | 42 | S&F in repairs aluminium anodised bow handles of 100mm long fabricated type of extrded section fixed with screws to shutters complete all as specified and directed. | 153 | 50 | Each |
| 43 | 43 | S&F in repairs 125 mm long safety type aluminium anodised hasp and staple with hinge pin incuding bolt to hinge plate and fixed with screws complete all as specified and directed. | 154 | 20 | Each |
| 44 | 44 | S&F in repairs 20 mm dia anodised aluminium tubular curtain rail with brackets, etc complete all as specified and directed. | 155 | 50 | RM |
| 45 | 45 | S&F in repairs Floor door stopper 150 mm length of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and directed. | 156 | 75 | Each |
| 46 | 46 | Hacking out old broken glass (any thickness, quality or description) from wooden frame, steel frmae, aluminium frame or stone concrete or brick surrounds, glazed with putty or fixed with beds complete all as specified and directed. | 157 | 60 | Sqm |
| 47 | 47 | S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty /rubber and aluminium beading/packing with rubber gasket in squares n exc 0.5 sq. m in each pane complete all as specified and directed. | 158 | 50 | Sqm |
| 48 | 48 | Supply and fixing figured glass,tinted colour, pin head type,4mm thick, in square n.exc.0.5sqm in each frame with rubber and aluminium beading/packing with rubber gasket complete all as specified and as directed by the EIC. | 159 | 10 | Sqm |
| 49 | 49 | S&F in repair aluminium alloy anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick complete all as specified and directed by EIC. | 160 | 50 | Sqm |
| 50 | 50 | S&F in repairs 40mm dia, cupboard knobs with nut, screw & washer of mild steel, bright finished | 161 | 20 | Each |
| 51 | 51 | S&F in repairs Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete | 162 | 30 | Each |
| 52 | 52 | Supply and fixing in repair aluminium handle for aluminium window shutters 100mm long. | 163 | 80 | Each |
| 53 | 53 | S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed. | 164 | 10 | Each |
| 54 | 54 | S&F in repair Mortice latch with four levers (vertical type), mild steel body. | 165 | 10 | Each |
| 55 | 55 | Taking down old wall panelling and similar work | 166 | 20 | Sqm |
| 56 | 56 | M&L ( in repairs) 18 mm thick Prelaminated particle board, interior grade, type-II, prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws as in shutters of Cup Boards complete with Wooden beads of size 18mmx6mm around edges and its varnishing / french polishing as directed.and specified. | 167 | 20 | Sqm |
| 57 | 57 | Dismantling timber scantling in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in\nsection | 168 | 50 | Rm |
| 58 | 58 | M&L 2nd class HW Plain fillets.square,rectangular or triangular in section, clean sawn, secured with nails or brads exc 3 sqcm n.exc 6sqcm. | 169 | 50 | Rm |
| 59 | 59 | S&F hasp and staple, aluminium anodised, including bolt to hinge plate and fixed with screws of 75 mm | 170 | 20 | Each |
| 60 | 60 | S & F continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flaps (when open) complete. | 171 | 20 | RM |
| 61 | 61 | S&F aluminium anodised bow handles of 75mm long fabricated type of extrded section fixed with screws to shutters complete all as specified and directed. | 172 | 10 | Each |
| 62 | 62 | S&F ( in repairs) 150 mm size mild steel patent helical door springs , with roller and roller plate , stove enamelled black or brown complete all as specified. (Note:- In cases where helical door springs are required to be fixed to pressed steel door frame, the rates includes for fixing it by welding also) | 173 | 20 | Each |
| 63 | 63 | Dismantling structural steel work as in doors, gates of any discription etc complete all as specified and directed. | 174 | 4.5 | Per Qtl |
| 64 | 64 | S&F mild steel work in tubular pipes including special shaped washer etc complete using ERW or induction butt welded tubes complete all as specified and directed. | 175 | 200 | Kg |
| 65 | 65 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 290 Gde- E-165) | 176 | 250 | Kg |
| 66 | 66 | M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.\n | 177 | 50 | Sqm |
| 67 | 67 | Dismantling of Plain or corrugated steel sheeting , any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete all as specified and directed.\n(Taking down of existing MS wind tie ( where required) to dismantle the mild steel sheet shall be deemed included in the unit rates)\n | 178 | 100 | Sqm |
| 68 | 68 | S&F Pre-painted galvalume( hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon, AZ 150 gm/sqm both side) , Zincalume (steel) based corrugated sheet 0.50mm thick ,of an approved colour, having tensile strength of 550 Mpa, and finished with resin coat on both surfaces as in roof covering/ cladding to wall,including flashings , ridges, valley etc fixed with self tapping screws complete all as specified.\n | 179 | 80 | Sqm |
| 69 | 69 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | 180 | 20 | Sqm |
| 70 | 70 | Demolition of un-reinforced cement concrete in ground floors and pavings not exc.15 cm thickness. (Below or above ground level). | 181 | 4 | Cum |
| 71 | 71 | M&L 50 mm thick PCC type C-2 (1:3:6) (using12.5 mm graded crushed stone aggregate as in plinth protection laid in panels, finished even and smooth without using extra cement. | 182 | 20 | Sqm |
| 72 | 72 | M & L chequered cement concrete tiles 20cm x 20cm x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over 20mm screed bed in CM ( 1 : 4) | 183 | 30 | Sqm |
| 73 | 73 | M&L for sand cushioning under floors in foundation including watering and consolidation all as specified. | 184 | 1 | Cum |
| 74 | 74 | M&L 60mm thick interlocking tiles (glossy finish) of M-30 mix laid, jointing and pointed in neat cement slurry over dry sand cushioning 30mm thick and edges shall be secured with PCC 1:2:4 type B-0 complete all as specified and as directed. Note : Sand cushioning shall be measured separately. | 185 | 20 | Sqm |
| 75 | 75 | Dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.\n | 186 | 110 | Sqm |
| 76 | 76 | M&L joint free Non Skid ceramic plain coloured tiles (also in patches ) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately).\n\n | 187 | 30 | Sqm |
| 77 | 77 | M&L glazed ceramic coloured tiles 350x250x 6 to7 mm thick/450x350x6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed in cement mortar 1:3 complete all as specified and directed. | 188 | 30 | Sqm |
| 78 | 78 | M&L Vitrified Ceramic tiles 9 to 10 mm thick light shade (also in patches) square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 | 189 | 20 | Sqm |
| 79 | 79 | M&L Vitrified Ceramic tiles 9 to10 mm thick light shade (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces as in dados,skirting etc, set & jointed in neat cement slury over and including 10 mm thick bedding layer of cement (1:4) pointed with white/coloured cement to match . | 190 | 30 | Sqm |
| 80 | 80 | Dismantling of stone slabs laid bedded and pointed in cement mortar , of any description or thickness in floors, aprons etc. complete all as specified and directed.\n\n | 191 | 0.1 | 10sqm |
| 81 | 81 | M&L 20 mm thick Granite stone slab of approved colour ( of any type) work ( table rubbed and polished to mirror finish ) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite CM 1:4 complete all as specified. | 192 | 5 | Sqm |
| 82 | 82 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets | 193 | 20 | Sqm |
| 83 | 83 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions | 194 | 20 | Sqm |
| 84 | 84 | Dismantling of Single layer Mangalore pattern or similar tiles in roofing | 195 | 20 | Sqm |
| 85 | 85 | M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry | 196 | 20 | Sqm |
| 86 | 86 | M&L ( in repairs) 600mm x 450mm bevelled edge mirror 5.5mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers complete all as specified. | 197 | 10 | Each |
| 87 | 87 | S&F ( in repairs) Stainless steel sink with draining board , made out of 1.00 mm thick sheet (ISI Marked) for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 950mmx460mm with bowl size 410mmx 330mmx160mm Olympia of Nirali or equivalent of other specified make complete all as specified and directed. | 198 | 5 | Each |
| 88 | 88 | S&F (in repairs) Vitreous china, white, Squatting pan ,'Orrisa' pattern size 580x440mm with integral footrests water closet) , front or back inlet complete , connection to drain pipe and to flushing pipe , antisyphonage pipe etc complete including making good to floor to match with the exisitng all as specified .\n | 199 | 5 | Each |
| 89 | 89 | S&F in repair vitreous China wash down water closet pan ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., and fixing of seat cover complete fixed in repairs complete all as specified. | 200 | 5 | Each |
| 90 | 90 | S&F in repair PVC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hanging devices. | 201 | 20 | Each |
| 91 | 91 | S&F ( in repairs) Low level flushing cistern 10 ltr capacity moulded from virgin poly propylene Make Parry ware Brand Slimline Single flush including provision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent of other make specified complete all as specified and directed. \n | 202 | 30 | Each |
| 92 | 92 | S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including CI cantilever brackets, 32 mm dia brass Chromium plated waste fittings with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of taps complete all as specified fixed in repairs .\n | 203 | 5 | Each |
| 93 | 93 | Supply & fixing in repair Pillar taps, fancy type with long nosecast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified.\n | 204 | 20 | Each |
| 94 | 94 | S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified.\n | 205 | 10 | Each |
| 95 | 95 | S & F 15mm Chromium plated , fancy type,Stop valves / angle cock screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair | 206 | 20 | Each |
| 96 | 96 | S&F ( in repairs) CP Angle stop cock( two way) screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed C complete all as specified .\n | 207 | 20 | Each |
| 97 | 97 | S&F ( in repairs) Bidet spray ( Health faucet) with 1 metre extendable metal tube and holder completed | 208 | 20 | Each |
| 98 | 98 | S & F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) fixed with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms | 209 | 20 | Each |
| 99 | 99 | S & F in repair 15mm Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed | 210 | 80 | Each |
| 100 | 100 | Supply and fixing Towel rail 450mm long with and including chromium plated brass screws wooden / plastic cleats min wt 170 gm. | 211 | 20 | Each |
| 101 | 101 | S&F ( in repairs) CP Brass Toilet paper holder fixed to walls with chromium plated (CP) brass screws. complete all as specified\n | 212 | 10 | Each |
| 102 | 102 | Dismantling existing water tank exc 500 ltrs & n. exc 1000 ltr capacity and removing from site. | 213 | 3 | Each |
| 103 | 103 | Dismantling PVC water tanks exc 250 ltrs but not exc 500 ltrs capacity and removing from site. | 214 | 3 | Each |
| 104 | 104 | S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991. | 215 | 3 | Each |
| 105 | 105 | S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991. | 216 | 3 | Each |
| 106 | 106 | Taking up or down 20 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed | 217 | 100 | RM |
| 107 | 107 | Supplying and laying of 20 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11with all fittings on walls/ceiling or laying in floors complete all as specified. | 218 | 100 | RM |
| 108 | 108 | S & F in repair stainless steel kitchen plate rack of size 1000 mm x 1200 mm x 250 mm made out of 1 mm thick stainless steel sheet complete. | 219 | 3 | Each |
| 109 | 109 | M & L 75mm outer dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement | 220 | 20 | Each |
| 110 | 110 | S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls | 221 | 20 | RM |
| 111 | 111 | S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls | 222 | 20 | RM |
| 112 | 112 | S & F 110mm bore PVC (SWR) bends With acces door any radius | 223 | 10 | Each |
| 113 | 113 | S & F 75mm bore PVC (SWR) bends with access door any radius | 224 | 20 | Each |
| 114 | 114 | S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed. | 225 | 20 | RM |
| 115 | 115 | S&F grating doom type 100mm dia of PTMT (min wt 25gms) | 226 | 20 | Each |
| 116 | 116 | S&F in repairs CP Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. | 227 | 20 | Each |
| 117 | 117 | S&F in repairs 15mm size PVC connection with PTMT nuts 450mm length complete all as specified and directed. | 228 | 30 | Each |
| 118 | 118 | S&F in repairs 15mm size PVC connection with PTMT nuts 600mm length complete all as specified and directed. | 229 | 30 | Each |
| 119 | 119 | S&F in repairs internal assembly kit for flushing cistern complete all as specified and directed. | 230 | 10 | Each |
| 120 | 120 | Material and labour for cleaning of water tank PVC/RCC of any capacity including writing date of cleaning on tank and applying a coat of bleaching powder complete all as specified and directed. | 231 | 75 | Each |
| 121 | 121 | S&F in repair Ball valves high pressure of PTMT 20 mm with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) | 271 | 30 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
