Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #25553672

Repair To Roof Leakage Seepage And Roof Treatment In Certain Bldg In Zone I At Umroi Mil Stn Under Ge Umroi

Issued by Statutory Bodies & Commissions/Committees · Umroi, Meghalaya
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Oct 2020
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Umroi → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Repair To Roof Leakage Seepage And Roof Treatment In Certain Bldg In Zone I At Umroi Mil Stn Under Ge Umroi

BOQ

Name of Work: Repair to roof leakage/seepage and roof treatment in certain bldg in zone I at Umroi Mil Stn UNDER GE UMROI
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Dismantling AC/CGI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets complete all as specified and directed.955Sqm
22Supply & Fix 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' or 'J' type hooks or cranked hook bolts as in roofs, walls etc with grade of zinc coating @ minimum 120 gm /sqm etc complete all as specified and directed.620Sqm
33Fixing only plain or corrugated steel sheet of any guage or thickness as obtained from dismantling item and shall be fixed with 'L' or 'J' type hooks or cranked hook bolts as in roof complete all as specified and directed.200Sqm
44Supply & Fix 0.80mm thick plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, crumple joint and similar works with grade of zinc coating @ minimum 120 gm /sqm etc complete all as specified and directed.60Sqm
55Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.60Sqm
66Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.15Sqm
77Dismantling wrought iron or mild steel work of any description and in any position complete all as directed by Engr-in-Charge.4Qtl
88Supply & Fix Mild Steel Flat Iron 40X6mm as in Wind Ties of Roofs, Ridge, etc. including supply of new Nuts, Bolts, Washers as required/ ordered for securing, complete all as specified and directed.400Kg
99Material & Labour applying two coats of synthetic enamel green color paint over a coat of red oxide primer on new steel surface of girth not exc 10cm width or girth complete all as specified and as directed.1.7X RM
1010Material & Labour applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm wide or girth incl preparation of surface etc. complete all as specified and as directed.2380Sqm
1111Demolition of reinforced cement concrete of any description and in any position not otherwise specified, complete all as specified and as directed.1Cum
1212Taking down of existing roof treatment from roof and terrance, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following specification:- \n(a) Applying cement slurry over concrete surfaces @3kg/sqm. \n(b)Rendring 15mm thick in cement mortar (1:4) mixed with water proffing compound as per manufactures instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course).\n(c) Applying evenly one coat of cold bituminous primer conforming to [email protected] liter per square metre on the cleaned plastered surfaces\n(d) Applying evernly one coat of blown hot bitumen of grade 85/25@ 1.20 Kg per square metre on primed surfaces.\n(e) Applying a layer of APP based polymeric membrane, 3mm thick (minimum) weighing 3.50 Kg per square metre reinforces) with polyster non woven fabric wighing not less than 160 gms per square metre by torch application. The overlap shall be not less than 100mm on transverese direction and 75mm on longitudinal direction and sealing overlaps.\n(f) Applying evenly one coat of aluminium paint @ 0.10 litre per square metre over the APP based polymeric membrane.570Sqm
1313Dismantling water tanks and removing to store, exc 500 ltrs but n exc 1000 ltrs,complete all as specified and as directed.20Each
1414Supply & Fixing 500 ltrs rotational moulded polythine water storage tanks (ISI marked) ( cylinder vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.10Each
1515Supply & Fixing 1000 ltrs capacity rotational moulded polythine water storage tanks (cylinder vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.10Each
1616Disconnecting existing tank, setting aside (or lowering if required) for repairs, etc and hoisting if required reconnecting and refixing in position of capacity in litres exc 250 n.exc 500 complete all as specified and as directed.5Each
1717Taking up or down steel tubing and conncection 20 mm bore, incl cleaning for re-fixing or removal to store, complete all as specified and as directed.60RM
1818Supply and fixing 20 mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 15mm) complete all as specified and directed.50RM
1919Refixing old steel tubing 20 mm dia and connection in new or old position complete all as specified and directed by Engr in charge.10RM
2020Supply & Fixing in repair 20mm bore nipple suitable for HDPE water tank (minimum weight 45 gms), complete all as specified and directed.20Each
2121Supply & Fixing 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball csrewed for iron pipe and fixed, complete all as specified and directed.20Each
2222Supply & Fixing 20 mm bore gun metal, glove or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.20Each
2323Supply & Fixing 20mm dia ball brass valve high pressure with polythene float and fly nut complete scrwed for iron pipe or brass ferrule and fixed in repairs complete all as specified and as directed.20Each
2424Demolition of brickwork/solid block masonry or stone boulder masonry, built in cement mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.3.5Cum
2525Material & Labour for precast cement concrete ( 1:3:6), type C-1, (using 20mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar (1:4) etc complete as specified.3.5Cum
2626Dismantling wall and ceiling board any thickness including cover fillets, complete all as directed.150Sqm
2727Material & Labour for 4 mm thick non asbestos fibre cement bldg board fixed to timber frame work in repairs with screws as in ceiling complete all as specified and as directed30Sqm
2828Material & Labour plain fillets, square rectangular or traingular in section clean sawn, secured with screws, in repair works, area exc 3 sqcm but n.exc. 6 Sqm cm, complete all as specified and as directed35RM
2929Material & Labour plain fillets, square rectangular or traingular in section clean sawn, secured with screws, in repair works, area exc 6 sqcm but n.exc.13 Sqcm, complete all as specified and as directed20RM
3030Material & Labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surface of any description n.exc 10cm width or girth complete all as directed.4.5X RM
3131Material & Labour for one coats of synthetic enamel paint over a coat of pink primer on new wooden surface ceiling complete all as specified and as directed.30Sqm
3232Material & Labour for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and as directed.105Sqm
3333Supply & Fixing Anodised aluminium snap grid frame work (605 x 605 mm) for false ceiling, complete all as specified and directed.105Sqm
3434Supply & Fixing Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs/truss by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fastners 12.5 mm dia 40mm long ,complete all as specified and directed.105Sqm
3535Supply & Fixing 20 mm thick 2nd class hard wood boarding fixed with nails in any situation and planed one side as in eave board, complete all as specified and as directed.15Sqm
3636Material & Labour for preparation of new wooden surfaces over 10 cm width of girth and applying two coats of synthetic enamel paint over a coat of pink primer.39Sqm
3737Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc.250Sqm
3838Material & Labour for 15MM (10+5mm) thick external wall plastering in CM (1:4) in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick finished the surfaces even & smooth without using extra cement complete all as specified and directed. \n(Note : Water proofing compound shall be measured and paid separately)150Sqm
3939Supply only integral water proofing compound ISI marked11KG
4040Preparing newly plastered surfaces of external walls and applying two coats of cement base paint over a coat of primer complete all as as specified and as directed.70Sqm
4141Material & Labour for preparation of newly plastered surfaces of walls including pilasters, cornices, etc. and applying two coats of colour wash over one coat of white wash, complete all as specified and as directed.50Sqm
4242Material and labour for preparation of newly plastered surafaces of wall and applying two coat of weather proof exterior emulation alkali resistant primer complete all as specified and directed.30Sqm
4343Material & Labour Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) on concrete surface finished even and smooth without using extra cement, complete all as specified and directed.90Sqm
4444Material & Labour for Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over one coat of wall care putty (3mm thick), complete all as specified and as directed.90Sqm
4545Material & Labour Rendering 5mm thick on fair faces of concrete surfaces in cement mortar (1:3) on concrete surface finished even and smooth without using extra cement, as in ceiling, complete all as specified and directed.50Sqm
4646Material & Labour for preparation of newly plastered surfaces of ceiling and applying three coats of whitewash, complete all as specified and as directed.50Sqm
4747Demolition cement concrete (un-reinforced) of any descriptions not exc. 150mm thick, above or below Ground Level, complete all as specified and directed1Cum
4848Material and labour for PCC 1:2:4 type B-O (using 12.5mm graded crushed stone agg) as in roof Kerbs, benching etc rounded or chamfered on edges mixed with WPC as per manufacturer's instructions complete all as specified and as directed. \n(Note : Water proofing compound shall be measured and paid separately)1Cum
4949Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc, including cleaning or refixing or removal to store complete all as directed330RM
5050Supply & Fix 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls etc all as specified & directed.330RM
5151Supply & Fix 110mm bore PVC (SWR) bends any radius all as specified & directed.94Each
5252Supply & Fix 10mm bore PVC (SWR) branch pieces, single 'Y' , equal or unequal all as specified & directed.15Each
5353Supply & Fix 110mm bore PVC (SWR) junction single, (single T) equal or unequal all as specified & directed.10Each
5454Removing demolished material upto a distance exceeding 100m but not exceeding 500m including loading/unloading and spreading at the destinaiton if required/directed by Engr-in-Charge.13Per Load

AI Tender Summary

OUR REF NO 25553672
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 12-10-2020
Authority
Authority Name Military Engineer Services
Work Description Repair To Roof Leakage Seepage And Roof Treatment In Certain Bldg In Zone I At Umroi Mil Stn Under Ge Umroi
Basic Detail
Tender No 8138/E8
Bidding Type Tender
Location
City Umroi
State Meghalaya
Key Dates
Publish Date 25 Sep 2020
Submission Date 12 Oct 2020
Open Date 14 Oct 2020
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 40000
Exemption Not Available
Document List
8138tenderdocuments.pdf
Tendernotice_1.pdf
BOQ_424660.xls
F8A3B302-0A4C-46EA-BEB2-95FA167EDF25.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 25, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 12, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 14, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

8138tenderdocuments.pdf

pdf

Tendernotice_1.pdf

xls

BOQ_424660.xls

html

F8A3B302-0A4C-46EA-BEB2-95FA167EDF25.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders