Construction Of Executive Engineer Office And Residential Building Of Jsv Division Dharampur At Bharari In Tehsil Dharampur , Distt . Mandi Hp Construction Of Pcc/Rcc Wall For Bifurcation Of Approach To Divisional Office From Cremation Hall
Tender Value
7.47 Lakhs
Estimated cost
Bid Submission
03 Oct 2020
0 days left
EMD
14960
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bharari → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Executive Engineer Office And Residential Building Of Jsv Division Dharampur At Bharari In Tehsil Dharampur , Distt . Mandi Hp Construction Of Pcc / Rcc Wall For Bifurcation Of Approach To Divisional Office From Cremation Hall
BOQ
| Name of Work: C/O Executive Engineer office and residential building of JSV Division Dharampur at Bharari in Tehsil Dharampur, Distt. Mandi HP (SH: Construction of PCC/RCC wall for bifurication of approach to divisional office from cremation hall) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and laying cement concrete 1:3:6 (1 Cement : 3 Sand :6 graded stone aggregate 20mm nominal size) and curing complete and reinforcement for reinforced concrete work excluding cost of form work in foundation and plinth as per direction and to the entire satisfaction of Engineer-in-Charge. | 56.81 | cum | |
| 2 | 2 | Providing and laying cement concrete 1 : 2 : 4 mix. ( 1 cement : 2 : sand : 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinfocement for reinforced concrete work in walls any thickness but not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto two level all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. | |||
| 3 | 2.01 | In lintels beams, girders, bressumers and cantilevers upto floor two level. | 5.67 | cum | |
| 4 | 2.02 | Walls any thickness but not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto two level all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. | 11.81 | cum | |
| 5 | 3 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :- | |||
| 6 | 3.01 | Foundation footings bases of columns and the like and mass concreteas per direction and to the entire satisfaction of Engineer-in-Charge. | 77.61 | Sqm | |
| 7 | 3.02 | Walls any thickness but not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto two level all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. | 64.69 | Sqm | |
| 8 | 4 | Providing Boulder filling under floor/behind retaining wall and breast wall with hard stone, with at least one broken face, hard packed properly with at in all lead and lifts complete as per direction and to the entire satisfaction of Engineer-in-charge. | 40.95 | cum | |
| 9 | 6 | Providing laying of Tor steel reinforcement for RCC work including bending binding and placing in position including wire upto all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. | 1311 | Kg | |
| 10 | 7 | Steel work welded in build up section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paintin grating, framed guard bars ladders, railing brackedts and similar works as per direction of Engineer-in-Charge upto all lead and lift. | 873.9 | Kg | |
| 11 | 8 | Pre painted eaves board 50cm wide | 6.64 | Rmt | |
| 12 | 9 | Providing/Fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel (TATA make) sheets in roofing with hut dipped metallic zinc coated sheets with top coat of regular modified polyesters organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia prepainted G.I. limpet and bitumen washer complete with all accessories as required as per the direction of Engineer-in-Charge. | 14 | Rmt | |
| 13 | 10 | Providing/Fixing 0.63mm thick prepainted steel sheet (TATA make) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 micron over 5 micron primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge . | 62.16 | Sqm |
AI Tender Summary
Tender Timeline
Jan 01, 1900
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 03, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender