Supply Installation Testing And Commissioning Of 3 Nos 7 Tr Hpac Units With Air Cooled Condensers For Infrastructure Works Of Iaf Site Under Nfs Project Uttarlai 1 Barmer Rajasthan Sh Associated Work
Tender Value
3.02 Lakhs
Estimated cost
Bid Submission
03 Oct 2020
0 days left
EMD
6040
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttarlai → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
supply installation testing and commissioning Of 3 Nos 7 Tr Hpac Units With Air Cooled Condensers For Infrastructure Works Of Iaf Site Under Nfs Project Uttarlai 1 Barmer Rajasthan Sh Associated Work
BOQ
| SITC of 3 Nos. x 7 TR Microprocessor based High Precision type AC units with Air Cooled Condensers for Infrastructure works of IAF site under NFS Project Uttarlai-1, Barmer (Rajasthan) (SH:-Associated Work). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supplying, installing, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, support as per approved drawing and specifications of following sheet thickness complete as required. | |||
| 2 | 1.1 | (ii) Thickness 0.80 mm sheet | item1 | 12 | sqmtr |
| 3 | 2 | SITC of fire dampers in supply air paths complete as required | item2 | 2 | sqmtr |
| 4 | 3 | SITC of duct dampers in supply air main ducts / branch ducts complete as required | item3 | 2 | sqmtr |
| 5 | 4 | Providing, Making & Fixing of flaxibal Double Layer canvas connection complete as required. | item4 | 3 | Job |
| 6 | 5 | SITC of indoor extensible type sheet steel metal clad, totally enclosed rigid floor mounted, air insulated cubical type M.V. panel made out of minimum 1.66 mm thick sheet steel metal with name plate, labels and shall be folded and braced as necessary to provide rigid support , separate housing for each switch, MCCB, Bus bar fixing arrangement i/c painting with powder coating paint, mounted with complete accessories suitable for operation on 415 volt, 3 phase, 4 wire 50 Hz, A.C. supply system, MCCB shall be provided with handle interlock & Door interlock having electrical and mechanical interlocking arrangement including interconnection with 2.5 sqmm FRLS PVC insulated copper conductor crimping the lugs, ferrules and sign wrighting, interconnection between busbar to outgoing switchgear and outgoing switch gear to connector in cable alley by adequate rating copper conductors pvc insulated wire and supply & fixing of Announciator control alarm (audio/visual) system window /panel in this panel. Including S/F of MS base channel of size 100mm X 50mm & the panel shall fixing on MS base channel of size 100mm X 50mm i/c minor civil works, panel made out as per CPRI guidelines and relevant IS/IEC codes etc. as required, consisting of following items. (For details see attached specification). Note:- 1. The panel shall be type tested design at CPRI / Independent test house for the rating required. 2. Panel drawing should be got approved from Engineer in charge before fabrication. | |||
| 7 | 5.1 | (a) 125 Amp, 36 KA, 4 pole MCCB with Microprocessor release range of 100-250A (L&T D Shine MTX1.0 Model DN2-250D/ similar superior make) along with rotary handle ----- 2 Nos. (b) 200 Amp. Aluminium BUS BARS (c) MCB 6 AMP (FOR indication lamp and multifunction meter supply)-07 Nos (d) 125/5 Amp. CTs----15 Nos (e) LED type indication lamp -07 Nos (f) 63 Amp TPN switch L&T FN 63 TPN SDF with bolted fuse - 4 Nos (g) 96mm x96mm square flush Digital Voltmeter-01 No (h) Voltmeter selector switch-01 Nos (i) 96mm x96mm square flush Digital Ameter -05 Nos (j) Ameter selector switch --05 Nos (f) Announciator control alarm (Audio/visual) system (i) LED type indication lamp -05 Nos (ii) PLA Relays with base-05 Nos (iii) potential free contactor relay-02 Nos (iv) limit switch-03 Nos (v) Industrial hooter-01 No (vi) Thermostat-01 No (vii) Humidistats-01 No (viii) Humidistats box-01 No (ix) 16 Ampere fuse base & carrier with 2/4 Ampere cartridge-01 set (x) Push Buttons for acceptance & reset | item5 | 1 | Job |
| 8 | 6 | SITC of PVC insulated PVC sheathed aluminum conductor armoured cable of following sizes on the existing MS tray /walls with saddles/PVC of cables with glands etc. as required | |||
| 9 | 6.1 | i) 4 x 10Sqmm (for Pkg.) | item6 | 30 | Mtrs. |
| 10 | 7 | SITC of following PVC insulated PVC sheathed copper conductor armoured cable for control wiring on the existing MS tray / walls with saddles/PVC thread/cable tie, screws etc. I/c end termination of cables with glands etc as required. | |||
| 11 | 7.1 | i) 4 x1.5sqmm | item7 | 60 | mtr |
| 12 | 8 | SITC I/c Fabricating following size of perforated MS cable tray I/c horizontal and vertical bends reducers tees, cross members and other accessories as reqd, and duly suspended from the ceiling with MS suspenders and including paint etc. as required. | |||
| 13 | 8.1 | i) 100mm width x 50mm x 1.6mm thickness | item8 | 5 | mtr |
| 14 | 8.2 | i) 150mm width x 50mm x 1.6mm thickness | item9 | 10 | mtr |
| 15 | 9 | SITC 25mmx5mm thick G.I. strip for loop earthing on cable tray wall etc as required | item10 | 30 | mtr |
| 16 | 10 | Supply of one number PVC insulated and PVC sheathed XLPE power cable of 1.1 KV grade of 3.5x95 sqmm aluminium conductor armoured cable etc. as required. | item11 | 60 | Mtr |
| 17 | 11 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. | |||
| 18 | 11.1 | Above 35 sq. mm and upto 95 sq. Mm | item12 | 10 | Mtr |
| 19 | 12 | Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface / recess as required. | |||
| 20 | 12.1 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) | item13 | 50 | Mtr |
| 21 | 13 | Supplying and making end termination with brass compression gland and aluminium for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. | |||
| 22 | 13.1 | 3½ X 95sq. mm (45mm) | item14 | 4 | Nos |
| 23 | 14 | Supplying and fixing of AC plant information board made out of 12 mm thick both side white colour prelaminated partical board of 3 feet x 2 feet i/c sign writing on board as per instruction by Engg in charge etc complete as reqd | item15 | 1 | Job |
| 24 | 15 | Conducting initial and final Acceptance testing as per department norms complete with all required necessary tools, controls and equipments etc. as directed. ( For items covered in this agreement) | item16 | 1 | Job |
AI Tender Summary
Tender Timeline
Sep 24, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 05, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender