Supply And Fixing Of Furniture Items ( Complete Job ) For Jkpdd Data Centre At Bemina Sgr, Srinagar-Jammu And Kashmir

Supply And Fixing Of Furniture Items ( Complete Job ) For Jkpdd Data Centre At Bemina Sgr.- 1 Office Table 2 Revolving Chair High Back 3 Revolving Chair Mid Back 4 Computer Table 5 Personal Locker 6 Auditorium Chair 7 7 Providing And Placing Chair Having Seat Made Up Of 1.2 + / - 0.1 Cm Thick Hot Pressed Plywood & Upholstered With Leather And Moulded Polyurethane Foam. The Back Shall Be Designed With Contoured Lumber Support For Extra Comfort. Size Of Back Shall Be W-53Cm, H-73Cm & Size Of Seat Shall Be W-54.6Cm X D-49Cm. High Resilience ( Hr ) Foam Should Be Used In Making Seat & Back Which Shall Be Moulded With Density 45 + / - 2 Kg / M ³ And Hardness Load 16+ / - 2 Kgf As Per Is: 7888 For 25% Compression. The Seat And Back Should Be Arrested Together With Spine Made Of 0.8 + / - 0.05 Cm Thick Hr Steel And Should Be Powder Coated In Black With 40-60 Micron Dft ( Dry Film Thickness ) . The Armrest Assembly Should Be Made Up Of Armrest Tube, Pu Armrest And The Armrest Top. The Armrest Tube Assy. Shall Be Made Of 2.54+ / - 0.03Cm X 0.16 + / - 0.0128 Cm M.S E.R.W Support Tubes And Chrome Plated. The P.U Armrest Shall Be Made Up Of Black Integral Skin Polyurethane With 50-70 Shore A Hardness Reinforced With M.S Insert. The Armrest Top Shall Be Made Up Of Abs & Upholstered With Foam & Leather. The Mechanism Of The Chair Shall Have Following Features : 360⁰ Revolving Type Without Back Tilt. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 12.0 + / - 0.3 Cm. The Beloow Should Be Made Up Of 3 Piece Telescopic Type & Injection Moulded In Black Polypropylene. The Pedestal Shall Be Made Of Die-Cast Aluminium With Buffing Finish. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 67.0 + / - 0.5 Cm Pitch-Centre-Dia ( 77.0 + / - 1.0 Cm With Castors ) . The Twin Wheel Castors Shall Be Made Of Nylon Injection Moulded In Black Color. Overall Dimensions Of Chair Shall Be, Width Of Chair - 77Cm, Depth Of Chair - 77 Cm As Measured From Pedestal Below. Height Of Back From Ground - Min 99.4 To Max 111.4 Cms. Seat Height - Min 43.4Cm To Max 55.4 Cm. Dimensions Tolerance / Variations Shall Be Within + / - 1 Cm. Approved Make Herman Miller / Bp Ergo / Godrej / Rockworth / Pen Workers Mumbai / Space Designs India / Govt Registered Companies Of Equivalent Make And Quality 8 E Podium:- Sitc Of Digital Podium Which Comes With An In-Built 22” Interactive Panel With Motorized Tilting, 19” Sub Monitor Which Acts As An Extended Monitor For The Presenter To View His Notes, 7” Touch Controller To Control All Av Equipments Like Projector, Motorized Screen, Pc, Audio, Dvd Player, Etc, 19” Rack For Installing Av Equipment. Approved Makes: Aha Or Techpodium Or Ils. / Herman Miller / Bp Ergo / Godrej / Rockworth / Pen Workers Mumbai / Space Designs India / Govt Registered Companies Of Equivalent Make And Qualitygovt Registered Makes And Of Equivalent Quality. 9 Low Back Ex. Chairs:- Providing And Placing A Chair Having Seat And Back Should Be Made From 1.2 ±0.1Cm Thick. Hot Pressed Plywood And Shall Be Upholstered With Fabric And Moulded Polyurethane Foam Together With Seat And Back Covers. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Dimensions Of Seat Shall Be 45.0Cm ( W ) X 42.0Cm. ( D ) And Of Back Shall Be 40.0Cm ( W ) X 47.0Cm. ( H ) . The Seat And Back Covers Shall Be Injection Moulded In Black Co-Polymer Polypropylene. The Hr Polyurethane Foam Shall Be Moulded With Density.=45±2.Kg / M3 And Hardness Load 16±2 Kgf As Per Is:7888.For 25% Compression. The One-Piece Armrests Are Injection Moulded From Black Nylon. The Armrests Are Fitted To The Seat With Armrest Connecting Brackets Made Of 0.5 ± 0.05 Em. Thk. Hr Steel. The Permanent Contact Mechanism Shall Be Designed With 360° Revolving Type, 14±2°Maximum Back Tilt Only, Upright Position Locking, Tilt Tension Adjustment. The Pneumatic Height Adjustment Shall Has An Adjustment Stroke Of 11.0 ±0.3Cm. The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Shall Be Injection Moulded In Black 30% Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 62.0 ±0.5Cm. Pitch-Centre Dia. ( 72.0 ±1.0Cm With Castors ) . The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height - Min 43.0 To Max 54.0Cm, Height - Min87.5 To Max 98.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-71.0 Cm And Depth-71.0 Cm. Approved Make Herman Miller / Bp Ergo / Godrej / Rockworth / Pen Workers Mumbai / Space Designs India / Govt Registered Companies Of Equivalent Make And Quality 10 Waiting Sofa:- Providing And Placing 3 Seater Waiting Chair Having Seat And Back Made Of 0.12±0.013Cm Thick Cr Steel Sheet With Oblong Perforations.They Shall Be Welded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thick Hr Steel. The Welded Assembly Shall Be Powder Coated ( Dft 40-60 Microns ) . The Seat Shall Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Shall Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Shall Aids In Easy Maintenance. The Dimensions Of Seat Shall Be 47.8 Cm ( W ) X 44.6 Cm ( D ) And Of Back Shall Be 41.6 Cm ( W ) X 23. Cm ( H ) . Understructure Assembly Shall Consist Of Connecting Beam And Leg Assembly Made Of M.S.E.R.W. Oblong Tube Of Size 7.5±0.03Cm X5.0±0.03Cm X 0.02±0.016Cm Thick.The Welded Structure Assembly Shall Be Powder Coated ( Dft 40-60 Microns ) .The Leg Assembly Shall Be Fitted With Shoes And Levellers In Nylon. The Leg Structure Shall Be Designed With Minimal Area Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Shall Help In Aligning The Structure For Back To Back Arrangements. Levelers Should Take Care Of Uneven Flooring.Connecting Beam Shall Be Fitted With Snap Locking Endcap.It Also Aids In Side-By-Side Understructure Alignment. Armrest Assembly Shall Consists Of Armrest Frame And Armrest Pad. The Armrest Frame Shall Be Made Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thickk Hr Steel And It Shall Be Powder Coated ( Dft 40-60 Microns ) . Armrest Pad Shall Be Injection Molded In Nylon And Shall Be Fitted Onto The Armrest Frame. Overall Dimensions Shall Be Seat Height - 44.1 Cm, Height - 78.5 Cm, Width & Depth Of Chair As Measured From Pedestal - Width-169.5Cm And Depth-63.8 Cm.The Cushions For Seat And Back Shall Be Made Of 1.5 ±0.1Cm Thk Foam On An 0.8±0.04Cm Flat Mr Grade Ply And Shall Be Upholstered With-Leatherite. Approved Make Herman Miller / Bp Ergo / Godrej / Rockworth / Pen Workers Mumbai / Space Designs India / Govt Registered Companies Of Equivalent Make And Quality 11 Single Bed:- Providing And Placing Single Bed Of Length Should Be 2060Mm, Width 1131Mm & Height - 930Mm. The Bed Structure Should Consist Of Metal Frames Made Of M.S. Channels In 1.0 Mm Thickness. Horizontal Plinths And Bottom Plinth Should Be Made Of 25 Mm Thick Pre-Laminated Particle Board. Head Board Should Be Made Of 18 Mm Thick Pre-Laminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trims Fixed To It. Tail Board Should Be Made Of 18 Mm Thick Pre-Laminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trims Fixed To It. Side Rail Should Be Made Of 18 Mm Thick Pre-Laminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trims Fixed On To It. Mattress Panels Of Bed Should Be Made Of 18 Mm Thick Pre-Laminated Particle Board With All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. The Overall Construction Of The Bed Should Be Knock Down Type. Finish Of The Bed Should Be 18 Mm Thick Pre-Laminated Particle Board In Walnut Shade. Metal Frames Should Be Powder Coated In Shade Mat Black To The Thickness Of 50 Microns. Approved Make Herman Miller / Bp Ergo / Godrej / Rockworth / Pen Workers Mumbai / Space Designs India / Govt Registered Companies Of Equivalent Make And Quality 12 Qty Can Vary ( +, - ) 25%

INR 2000 /-

INR 67000.0 /-

INR 33.60 Lakhs /-