Jjm 2020 21 Wss To Cheekode And Adjoining Villages Survey Design Supply Laying Commissioning Balance Distribution System With Fhtc In Vazhayur Grama Panchayath Of Malappuram District
Tender Value
12.91 Crore
Estimated cost
Bid Submission
15 Oct 2020
0 days left
EMD
5 Lakhs
Bank guarantee accepted
Document Fee
16800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vazhayur → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Jjm 2020 21 Wss To Cheekode And Adjoining Villages Survey Design Supply Laying Commissioning Balance Distribution System With Fhtc In Vazhayur Grama Panchayath Of Malappuram District
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Oct-2020 | Date extension corrigendum | Date | 15-Oct-2020 |
BOQ
| Name of Work: JJM 2020-21-WSS TO Cheekode and adjoining Villages-Survey ,Design ,Supply,Laying &Commissioning Balance Distribution system with FTHTC in Vazhayur Grama Panchayath of Malappuram District | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Working charges (pipe Laying) | |||
| 2 | 1.01 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil (Ref. Item No. 2.10.1 of DSR) | 19028.1 | cum | |
| 3 | 1.02 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :\"Ordinary Rock. (Ref. Item No. 2.13.1 of DSR) | 26490 | cum | |
| 4 | 1.03 | Fencing one side of trenches, 1.50 m height with two rows of 10 cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2 m intervals. (Data Prepared based on PWD SDB - Item No.1009) | 22500 | metre | |
| 5 | 1.04 | Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 200mm along the sides of proposed alignment of the pipe to be laid without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffice diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means and carrying out the excavation. | 56000 | metre | |
| 6 | 1.05 | Dismantling manually/Mechanical means and dispsal of materials within 50 mts lead as per direction of Engineer -in charge- Bituminous road. | 14500 | sqm | |
| 7 | 1.06 | Supply ,stacking,spreading and consolidating of Quarry Muck in the trench of pipe line, including carriage, loading ,unloading & stacking up to any lead. | 2175 | cum | |
| 8 | 1.07 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 1450 | cum | |
| 9 | 1.08 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).63 mm nominal outer dia pipes. | 10000 | metre | |
| 10 | 1.09 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials). 90 mm nominal outer dia pipes.\" | 55000 | metre | |
| 11 | 1.1 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).110 mm nominal outer dia pipes. | 8500 | metre | |
| 12 | 1.11 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).160 mm nominal outer dia pipes. | 6000 | metre | |
| 13 | 1.12 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials). 140 mm nominal outer dia pipes. | 3500 | metre | |
| 14 | 1.13 | Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials :200 mm dia Ductile Iron Class K-9 Pipes Data derived from 18.72.17 in DAR | 1500 | metre | |
| 15 | 1.14 | Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials : 250 mm dia Ductile Iron Class K-9 Pipes Data derived from 18.72.18 in DAR | 500 | metre | |
| 16 | 1.15 | Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials : 300 mm dia Ductile Iron Class K-9 Pipes Data derived from 18.72.19 in DAR | 500 | metre | |
| 17 | 1.16 | \"Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :80 mm diameter. Class II\"Observed Data derived from item no.18.31.of DAR | 70 | Nos | |
| 18 | 1.17 | Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :100 mm diameter. Class II\" Data derived from item no.18.31.1.2of DAR | 3 | Nos | |
| 19 | 1.18 | Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) : 150 mm diameter. Class II\"Data derived from item no.18.31.3.2of DAR | 5 | Nos | |
| 20 | 1.19 | Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) : 200 mm diameter. Class II\" Data derived from item no.18.31.4.2of DAR | 2 | Nos | |
| 21 | 1.2 | Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :250 mm diameter. Class II\"Data derived from item no.18.31.5.2of DAR | 2 | Nos | |
| 22 | 1.21 | Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) : 300 mm diameter. Class II\"Data derived from item no.18.31.6.2of DAR | 2 | Nos | |
| 23 | 1.22 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately):50 mm Double acting Air Valve Data derived from item no.18.59.1 of DAR | 10 | Nos | |
| 24 | 1.23 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately): 25 mm Single acting Air Valve Observed Data derived from item no.18.59.of DAR | 50 | Nos | |
| 25 | 1.24 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately): 80 mm Double acting Air Valve Data derived from item no.18.59.2 of DAR | 10 | Nos | |
| 26 | 1.25 | Providing and laying D.I specials of class K - 12 suitable for push - on jointing as per IS : 9523 : | 26.861 | quintal | |
| 27 | 1.26 | Fabricating MS pipes of size 200mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | 15 | metre | |
| 28 | 1.27 | Fabricating MS flanges of diameter 200 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | 8 | Nos | |
| 29 | 1.28 | Cutting 200 mm (ID) MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | 8 | No | |
| 30 | 1.29 | Welding 200 mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | 8 | No | |
| 31 | 1.3 | Grinding cut and weld edges of 200 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | 8 | No | |
| 32 | 1.31 | Fabricating MS pipes of size 250mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | 15 | metre | |
| 33 | 1.32 | Fabricating MS flanges of diameter 250 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | 8 | Nos | |
| 34 | 1.33 | Cutting 250 mm (ID) MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | 8 | No | |
| 35 | 1.34 | Welding 250mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | 8 | No | |
| 36 | 1.35 | Grinding cut and weld edges of 250 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | 8 | No | |
| 37 | 1.36 | Fabricating MS pipes of size 300mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | 15 | metre | |
| 38 | 1.37 | Fabricating MS flanges of diameter 300 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | 8 | Nos | |
| 39 | 1.38 | Cutting 300 mm (ID) MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | 8 | No | |
| 40 | 1.39 | Welding 300 mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | 8 | No | |
| 41 | 1.4 | Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:200 mm dia pipes | 250 | joint | |
| 42 | 1.41 | Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:250 mm dia pipes | 100 | joint | |
| 43 | 1.42 | Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:300 mm dia pipe | 100 | joint | |
| 44 | 1.43 | Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 : | 6 | metre | |
| 45 | 1.44 | Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 : | 6 | metre | |
| 46 | 1.45 | Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 : | 6 | metre | |
| 47 | 1.46 | cutting DI pipe -200 mm | 15 | No | |
| 48 | 1.47 | cutting DI pipe -250 mm | 5 | No | |
| 49 | 1.48 | cutting DI pipe -300 mm | 10 | No | |
| 50 | 1.49 | Testing 200mm DI/CI pipeline with potable water to the required test pressure 200 mm dia Observed Data derived from item no.1020 of PHED DATA | 1500 | metre | |
| 51 | 1.5 | Testing 250mm DI/CI pipeline with potable water to the required test pressure . 250 mm dia Observed Data derived from item no.1022 of PHED DATA | 500 | metre | |
| 52 | 1.51 | Testing 300mm DI/CI pipeline with potable water to the required test pressure. 300 mm dia Observed Data derived from item no.1023 of PHED DATA | 500 | metre | |
| 53 | 1.52 | Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore | 3000 | metre | |
| 54 | 2 | Constuction of Valve Chamber | |||
| 55 | 2.01 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 168.75 | cum | |
| 56 | 2.02 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | 16.875 | cum | |
| 57 | 2.03 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | 71.655 | cum | |
| 58 | 2.04 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 72.6 | sqm | |
| 59 | 2.05 | Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | 561 | sqm | |
| 60 | 2.06 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 3582.9 | kilogram | |
| 61 | 3 | Cost of Materials | |||
| 62 | 3.01 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 200mm Dia. | 1500 | metre | |
| 63 | 3.02 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 250mm Dia. | 500 | metre | |
| 64 | 3.03 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 300mm Dia. | 500 | metre | |
| 65 | 3.04 | Supply of PVC Pipe, 10kg/cm2, 63mm Dia. | 10000 | metre | |
| 66 | 3.05 | Supply of PVC Pipe, 8kg/cm2, 90mm Dia. | 50000 | metre | |
| 67 | 3.06 | Supply of PVC Pipe, 10kg/cm2, 90mm Dia. | 5000 | metre | |
| 68 | 3.07 | Supply of PVC Pipe, 8kg/cm2, 110mm Dia. | 8000 | metre | |
| 69 | 3.08 | Supply of PVC Pipe, 10kg/cm2, 110mm Dia. | 500 | metre | |
| 70 | 3.09 | Supply of PVC Pipe, 8kg/cm2, 140mm Dia. | 3000 | metre | |
| 71 | 3.1 | Supply PVC Pipe, 10kg/cm2, 140mm Dia. | 500 | metre | |
| 72 | 3.11 | Supply of PVC Pipe, 8kg/cm2, 160mm Dia. | 4000 | metre | |
| 73 | 3.12 | Supply of PVC Pipe, 10kg/cm2, 160mm Dia. | 2000 | metre | |
| 74 | 3.13 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm. | 50 | No | |
| 75 | 3.14 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Kinetic Air Valve Type DK, Size 50mm. | 10 | No | |
| 76 | 3.15 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Kinetic Air Valve Type DK, Size 80mm. | 10 | No | |
| 77 | 3.16 | Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm. | 70 | No | |
| 78 | 3.17 | Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 100mm. | 3 | No | |
| 79 | 3.18 | Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 150mm. | 5 | No | |
| 80 | 3.19 | Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 200mm. | 2 | No | |
| 81 | 3.2 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 250mm. | 2 | No | |
| 82 | 3.21 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 300mm. | 2 | No | |
| 83 | 4 | PROVIDING F H TC | |||
| 84 | 4.01 | Providing 15mm (1/2 inch) house connection with 15mm water meter from existing PVC / HDPE mains up to 110 mm dia., up to a length of 5m using 20mm ( 1/2 inch ) PE Pipe, PE80, PN16, Conforming to IS 4984: 2016 or later edition and PP PN 16 Compression / GM / Brass specials viz. brass ferrule, brass hexagonal nipple, GM full way wheel valve, bend, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. | 5500 | Nos | |
| 85 | 4.02 | Providing 15mm (1/2 inch) house connection with 15mm water meter from existing PVC / HDPE mains from 140mm to 200mm dia., up to a length of 5 m using 20mm ( 1/2 inch ) PE Pipe, PE80, PN16, Conforming to IS 4984: 2016 or later edition and PP PN 16 Compression / GM / Brass specials viz. brass ferrule, brass hexagonal nipple, GM full way wheel valve, bend, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. | 246 | Nos | |
| 86 | 4.03 | Providing additional length of house connection pipe using 20 mm (1/2 inch) PE Pipe, PE80, PN16, Conforming to IS 4984: 2016 or later edition and PN16 specials and testing the joints etc., by trenching and refilling in all kinds of soil with trench of average cross section 0.3m x 0.75m for laying of connection pipe and service pipe, lighting, watching, providing caution boards, traffic control etc., including cost of materials, hire for tools, cost of consumables and labour charges etc. complete, but excluding the cost of cutting of concrete / tarred / bituminous roads etc., and as per the directions of the department officers. | 86190 | metre | |
| 87 | 4.04 | Providing 15mm PVC Tap in the water meter assembly for 15mm ( 1/2 inch ) water connection, using 20mm ( 1/2 inch ) Indian Standard uPVC Class 6 pipes, uPVC specials and PP PN 16 Compression specials including cost of materials, consumables, hire charges for tools and labour charges etc. complete and as per the direction of departmental officers. | 5746 | Nos | |
| 88 | 4.05 | Supply of PVC Pipe, 6kg/cm2, 75mm Dia. | 1300 | metre | |
| 89 | 4.06 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 120.001 | cum | |
| 90 | 4.07 | Towards the Charges for Geo Tagging of FHTC | 5746 | No | |
| 91 | 4.08 | K.W.A Water Connection Application Fee, Connection Fee and Meter testing Fee | 5746 | No | |
| 92 | 4.09 | Additional Connection Fee for KWA for SME greater than 30m | 1000 | No | |
| 93 | 5 | Survey &;Design | |||
| 94 | 5.01 | Surveying using Electronic Total Station/DGPS for preparing topographical map with reduced level not less than 50mtr interval ,preparing soft copy in CAD format & hard copy with all relevant details ,marking all existing pipe etc including design of distribution system using computer software as per directions of departmental officers and getting approval etc | 180 | km |
AI Tender Summary
Tender Timeline
Oct 13, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 15, 2020
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 15, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 19, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender