| 1 | 1 | . | BI01010001010000000000000515BI0100001113 | | |
|---|
| 2 | 1.01 | 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001114 | 0.459 | cum |
|---|
| 3 | 1.02 | 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001115 | 1225.56 | kg |
|---|
| 4 | 1.03 | od68861/2019_2020 : Providing & fixing Alu-zinc traffold roofing sheets of good quality up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia G. I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. | BI01010001010000000000000515BI0100001116 | 213.718 | sqm |
|---|
| 5 | 1.04 | 12.51.1 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) | BI01010001010000000000000515BI0100001117 | 14.75 | metre |
|---|
| 6 | 1.05 | 12.51.6 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Gutter (600 mm over all girth) | BI01010001010000000000000515BI0100001118 | 5 | metre |
|---|
| 7 | 1.06 | od70632/2019_2020 : Providing and fixing 150 mm dia 1/2 portion PVC gutter with iron clamp including all labour charges etc. complete | BI01010001010000000000000515BI0100001119 | 30 | metre |
|---|
| 8 | 1.07 | 12.41.2 : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter | BI01010001010000000000000515BI0100001120 | 36 | metre |
|---|
| 9 | 1.08 | 12.42.5.1 : Bend 87.5<sup>0</sup>75 mm bend | BI01010001010000000000000515BI0100001121 | 25 | each |
|---|
| 10 | 1.09 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001122 | 77.698 | sqm |
|---|
| 11 | 1.1 | 14.83 : Hacking of CC flooring including cleaning for surface etc. complete as per\ndirection of the Engineer-in-Charge.Hacking of CC flooring including cleaning for surface etc. complete as perdirection of the Engineer-in-Charge. | BI01010001010000000000000515BI0100001123 | 82.535 | sqm |
|---|
| 12 | 1.11 | od550/2020_2021 : Cement mortar 1:4 (1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001124 | 1.48 | cum |
|---|
| 13 | 1.12 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001125 | 82.535 | sqm |
|---|
| 14 | 1.13 | 11.47.2 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001126 | 25.504 | sqm |
|---|
