| 1 | 1.1 | Dismantling ot existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead as per clause no. 202 of MoRD specification Rural roads (a) Brick Masonary | | 13.92 | Cum (Per cubic meter) |
|---|
| 2 | 1.2 | RCC/Cement Concrete | | 3.52 | Cum (Per cubic meter) |
|---|
| 3 | 2 | Cleanng and Grubbing road land including uprooting vegetation, grass, bushes, Ishrubs, saplings and trees girth up to 300mm, removal of stumps of trees cut (earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned in area of non-thorny jungle, to all lead and lifts. Including removal and disposal of top organic soil not exceeding 150mm in thickness as per clause no 201 of MoRD specification Rural roads-2004. | | 1.57 | HA (Per hectare) |
|---|
| 4 | 3 | Milling of distress bituminous layer upto 20mm depth in single pass with suitab (milling machine (capable of milling @200-300 sqm area per Hr.) fitted with loading conveyor for loading the milled material directly on the trucks i/c hauling and stock piling the reclaimed material near the central recycling plant or reclaiming to br (to required as per specification to reuse with the approval ot Engineer-in-Charge for safe disposal with all leads and lifts complete in all respects.(N.S) Note- The unutilized quantity of reclaimed bituminous mix material shall be recovery item (mentioned in item no-__) | | 314.76 | Cum (Per cubic meter) |
|---|
| 5 | 4 | Earth work excavation in ordinary soil exclusive of compensation of earth-earthwork undressed with all lead & lift including breaking of clods. (HSR 6.2b) . and relaying the same for making of berms and side slopes including laying, dressing, watering & rolling as per HSR 6.2 g-i, g iii & g-v - | | 2169.88 | Cum (Per cubic meter) |
|---|
| 6 | 5 | Preparation of berms including filling of Earth work, excavation and cutting of earth in all kind of soils including dressing the bank, side slope to given levels and templates after breaking of clouds, including the cost of rolling and watering all allowances for labour hardness wetness irrespective of all lead and lift and including Compensation for earth taken from private land, fields etc. and compacted to meet requirement of table 300-2 of MoRT&H specification clause No. 305 and to the entire satisfaction of the Engineer of the work conforming to PWD specification No. 6.2 and 6.3 and 3.2 and the other specification 1990 Ist edition. As per X-section . This item also includes E/W if required in sub grade for Widening and Shoulder. Earth used for sub grade, shoulder and berms should have minimum CBR of 8%. \nNote:- No earth work will be allowed to be taken from PWD B&R/ ROW except for surplus earth after approval from Engineer. | | 4.3 | Km. (Kilometer) |
|---|
| 7 | 6 | Preparation of sub-grade including trenching rough dressing of soil, final dressing of earth to given levels and chamber , watering, rolling with road roller and compacting the bed in all respect before laying paving material [confirming to clause 301 of MoRD specification for Rural Roads-2004] Note: - In widening portion sub grade will be prepared with the use of Baby roller (HSR 24.1) or width of excavation should be made sufficient wide to accommodate road roller. Extra width required for compaction of sub grade shall not be paid and its expenditure shall be in incidental to the work. | | 9643.9 | Sqm. (Per Square meter) |
|---|
| 8 | 7 | Providing laying, watering and compacting of 150 mm GRANULAR SUB BASE COARSE (G-lll) graded by providing well graded material spreading in uniform layers with mortar grader on prepared surface mixing in a mechanical mix plant at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification of MoRD clause 401 for Rural Roads 2004). Note:- Only crushed material should be used, no local earth/sand shall be used. The material finer than 425 micron shall have zero plasticity index (P-l) 2. Material and operation manufacturing shall be approved by Engineer. | | 1446.59 | Cum (Per cubic meter) |
|---|
| 9 | 8 | Providing & laying 75 mm thick (Compacted) stone metal (G-ll) 63mm to 45mm gauge wearing coat to water bound macadam in layer of 75mm each using screening type B' compacting with three wheeled power rollers of 80-100 kN capacity or tandem or vibratory of 80-100 kN static weigth to achieve the desire density including lighting, guarding barricading and maintenance of diversion etc. as per clause no 405 of MoRD specification for Rural Roads-2004) as per drawing and design directed by the Engineer complete in all respects.(N.S.) Note: - I.Only crushed stone metal material should be used. No local earth/ natural occurring sand shall be used. The material finer than 425 micron shall have zero Plasticity Index (PI). 2. Materials to be used and operations of manufacturing shall be approved by engineer. | | 626.54 | Cum (Per cubic meter) |
|---|
| 10 | 9 | Providing & laying 150 mm thick (Compacted) stone metal (G-llI) 53mm to 22.4mm gauge wearing coat to water bound macadam in layer of 75mm each using screening type B' compacting with three wheeled power rollers of 80-100 kN capacity or tandem or vibratory of 80-100 kN static weigth to achieve the desire density including lighting, guarding barricading and maintenance of diversion etc. as per clause no 405 of MoRD specification for Rural Roads-2004) as per drawing and design directed by the Engineer complete in all respects.(N.S.) Note: - I.Only crushed stone metal material should be used. No local earth/ natural occurring sand shall be used. The material finer than 425 micron shall have zero Plasticity Index (PI). 2. Materials to be used and operations of manufacturing shall be approved by engineer. | | 3613.79 | Cum (Per cubic meter) |
|---|
| 11 | 10 | Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer mix including silane at the rate of 1.0 kg/sqm using mechanical means as per Technical specification clause 502 of MoRD specification Rural roads-2004. Instructions issued from time to time by MoRD regarding bitumen emulsion will be followed strictly. Note:- Bituminous Macadam to be laid with in 24 Hrs. of laying primer coat & Tack mat does not required to be provided above the primer coat. However, if the tack coat is not laid within 24 hours of laying primer coat, then tack coat would have to be provided by the contractor but no payment of the same shall be made and it would be incidental to work. | | 24007.4 | Sqm. (Per Square meter) |
|---|
| 12 | 11 | Providing and applying Tack coat of VG 10 ( 80/100 grade) bitumen using) Sqm. (Per bitumen @ 0.25 kg per sqmall inclusive including clearing and blowing dust off the Square meter) surface using a compressor and brooms ( conforming to clause 503 of MoRD specification-2004) for PC. Instructions issued from time to time by MoRD fording bitumen VG-10 will be followed strictly. | | 24511.9 | Sqm. (Per Square meter) |
|---|
| 13 | 12 | Providing & laying 50mm BM using the reclaimed material to the extent of 30% of the required quantity, hauling and stockpiling the reclaimed material near the central recycling plant after carrying out necessary checks and evaluation, adding fresh material including rejuvenators as required, mixing in Drum type hot mix plant, with appropriate arrangement for use of R.A.P., transporting and laying at site with hydraulic paver finisher with sensor control to the required grade and compacting to the required grade level and thickness with appropriate rollers all as specified in clause 519 (5th Revision) of 2013 using bitumen VG-30. (minimum Bitumen's 3.40% i/c bitumen of retrieved material as per job mix formula) complete in all respect. Note: -1. The milled material to be used in BM shall be minimum 80% of the theoretical quantity of milled material. 2. If bitumen required more than 3.40% as per job mix formula no extra payment will be paid extra bitumen required will be considered as incidental to work. 3. Before carrying out bituminous work, coating & Stripping of bitumen aggregate mix is to be performed in accordance with IS-6241. If coating and stripping of bitumen aggregate mix is less than 95%, anti-stripping agent will be used by contractor. The anti-stripping agent should conform to the requirement as stipulated in IS 14982:2017. The cost so incurred will be considered as incidental to work and noting extra shall be payable. The type and brand of anti-stripping agent along with procedure shall be approved by SE-in-Charge in writing before start of work. A proper record of results be maintained and same shall be submitted along with bills by the contractor. | | 839.36 | Cum (Per cubic meter) |
|---|
| 14 | 13 | Providing and Laying 50 mm thick Compacted bituminous macadam in (BM) one layer by drum type hot mix plant and paver finisher) cubic meter) with sensor control to the required grade as per clause No. 504 table No. 500-4 of MoRD specification using minimum 3.4 % bitumen grade VG-30 as binder content by weight of total mix, complete in all respects i/c cost of bitumen, instruction issued from time to time by MoRD regarding machinery & bitumen will be followed strictly. The use of self propelled mechanical paver fitted with electronic sensor device conforming to MoRD specification in mandatory. If bitumen required is this account more than 3.4% as per job mix formula no extra payment will be made, extra bitumen required will be considered as incidental to work. Note: - 1. Before carrying out bituminous work, coating & Stripping of bitumen aggregate mix is to be performed in accordance with IS-6241. If coating and stripping of bitumen aggregate mix is less than 95%. anti-stripping agent will be used by1 contractor. The anti-stripping agent should conform to the requirement as stipulated in IS 14982:2017. The cost so incurred will be considered as incidental to work and noting extra shall be payable. The type and brand of anti-stripping agent along with procedure shall be approved by SE-in-Charge in writing before start of work. A proper record of results be maintained and same shall be submitted along with bills by the contractor. | | 386.24 | Cum (Per cubic meter) |
|---|
| 15 | 14 | Providing laying and rolling of open graded pre mix carpet (PC) of 20mm thickness composed of 13.2 to 5.6 aggregates using bitumen VG-10 @1.46 kg per sqm. (93% bitumen) and processed waste plastic @ 7% of bitumen content as per IRC SP -98 -2013 to required line . grade and level to serve as wearing course on previously prepared base , including mixing in a suitable plant, transported to site . laying with paver Finisher and rolling with three wheeled 80-100 kn static roller capacity or with other approved equipment. Finished to required level and grades as per MoRD specification clause 508. NOTE- Before carrying out bituminous work, coating & Stripping of bitumen aggregate mix is to be performed in accordance with IS-6241. If coating and stripping of bitumen aggregate mix is less than 95%. anti-stripping agent will be used by contractor. The anti-stripping agent should conform to the requirement as stipulated in IS 14982:2017. The cost so incurred will be considered as incidental to work and noting extra shall be payable. The type and brand of anti-stripping agent along with procedure shall be approved by SE-in-Charge in writing before start of work. A proper record of results be maintained and same shall be submitted along with bills by the contractor. | | 24511.9 | Sqm. (Per Square meter) |
|---|
| 16 | 15 | Providing and laying 'B’ type seal coat with VG-10 grade bitumen @ 0.68 kg per sqm of road excluding cost of tack coat, with mixed material brought from Hot mix plant and laying with paver finisher and compacting with road roller to achieve specified/desirable value of compaction as per direction of Engineer including cost of lighting arrangement, sign board and night watch, complete in all respect as per clause 510 of MoRD specification for rural roads 2004. | | 24511.9 | Sqm. (Per Square meter) |
|---|
| 17 | 16 | Earth work in excavation of foundation of structures as per drawing and technical specification,clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, and disposal upto a lead of 50 m . dressing of side and bottom and backfilling in trenches with excavated suitable material as per clause no. 305 of MoRD specification Rural roads-2004. | | 137.927 | Cum (Per cubic meter) |
|---|
| 18 | 17 | Providing and laying in position Cement Concrete 1:2:4 with stone aggregate 20mm nominal size in foundation and plinth.(HSR 10.41) | | 21.25 | Cum (Per cubic meter) |
|---|
| 19 | 18 | Providing & laying in position machine batached and machine mixed design mix M-15 grade cement concrete for reinforced cement concrete work, using cement content as er approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering,finishing and reinforcement, including admixtures in ommended proportions as per IS: 9103 to accelerate, retared setting of concrete, mprove workability without impairing strength and durability as per direction of Engineer-in charge in foundation and plinth. (Note: Cement Concrete considered in this item is @ 240 Kg/cum). (HSR 10.65) | | 53.87 | Cum (Per cubic meter) |
|---|
| 20 | 19 | Providing & Laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in foundation and plingth. (Note: Cement content considered in this item is @330 Kg/cum) (HSR 10.64) | | 24.36 | Cum (Per cubic meter) |
|---|
| 21 | 20 | Fe-500 EQR TMT bar for RCC work, where not included in the complete rate of RCC including bending, binding & placing in the position complete. (HSR 18.22) ( Note:- Reinforcement shall be measured in the length including hooks, excluding overlaps. From the length so measured , the weight of reinforcement shall be calculated in tonnes on the basis of IS:1732. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing , shall not be measured and cost of these items shall be deemed to be included in the rates of reinforcement). | | 1.37 | MT (Per metric tonne) |
|---|
| 22 | 21 | Providing lowering, cutting jointing and testing RCC pipe of 600mm Dia in Single row of class NP3 as per IS-458-2003 which Spigot & socketted joints manufactured with ISI marked antiternmite as required at site, into trenches, for all depths and laying out the same to correct alignment, gridients and levels including dressing and trimming and cutting of concrete beds and sides of trenches, if required, jointing with rubber rings in trenching and jointing with 1 : 11/2 cement sand mortar and with end dowels filled with 1 : 11/2 cement sand mortar and finishing the joints at an angle of 45 degree with faces of spigot of socket joints cutting and finishing the cut surface to a uniform finish etc. as fully described in HSR item no. 29.38. 29.44, 29.45 & 29.46 including cartage loading and unloading complete in all respects. | | 68.25 | MT (Per running meter) |
|---|
| 23 | 22 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition :omplete as per drawing and technical specification clause 1204.3.8 of MoRD specification Rural roads-2004. | | 27.84 | Cum (Per cubic meter) |
|---|
| 24 | 23 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and Technical Specifications clause No. 614, 709. 1204.3.7 of MoRD specification 2004 | | 12 | Cum (Per cubic meter) |
|---|
| 25 | 24 | Backfilling with sandy material behind abutment, wing wall and return wall complete as per drawings & technical specification MORD Specification. | | 73.14 | Cum (Per cubic meter) |
|---|
| 26 | 25 | Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Minting and Plastering, as per Drawing and Technical Specifications.(Clause No. 1202 & 1203 of MoRD Specification 2004 ) | | 58.81 | Cum (Per cubic meter) |
|---|
| 27 | 26 | Pointing with cement mortar 1:3 on brickwork as per technical specification clause 613.3 of MoRD specification Rural roads-2004. | | 160.98 | Sqm. (Per Square meter) |
|---|
| 28 | 27.1 | Providing and fixing of shoulder mounted sign boards of various sizes using non metallic micro prismatic retroreflective sheet conforming to IRC: 67 -2012 type IV HIP specification fixed on 3 mm thick Aluminium anel,having 0.5 mm thick Composite Aluminium on both sides supported on Mild Steel Pipe leg post 80mmNB,1.6mm thick duly painted in alternative color of black and white embeded M-20 Grade concrete foundation of size 450mm x 450mm x 600mm. complete as per drawings. Technical Specifications and as directed by Engineer-in-Charge. 900 mm equilateral triangle | | 18 | Number (Per Number) |
|---|
| 29 | 27.2 | 800 mm x 600 mm rectangular | | 6 | Number (Per Number) |
|---|
| 30 | 27.3 | 600 mm x 450 mm rectangular | | 4 | Number (Per Number) |
|---|
| 31 | 27.4 | 600 mm equilateral triangle | | 6 | Number (Per Number) |
|---|
| 32 | 27.5 | 900 mm High Octagon | | 12 | Number (Per Number) |
|---|
| 33 | 28 | Providing & erecting OVERHEAD SIGNS Cantilever gantry supported by M. S. Pipe Structure complete as per drawings. Technical Specifications and as directed by Engineer-In-Charge including construction of R.C. C. foundation for providing of M. S Tubular structure for Cantilever signage at given site as per drawing enclosed. The C. C. mix to be in ratio of 1:154:3 (RCC 1:154:3) and that of lean to be ratio of 1:3:6 the work wilt be carried out as per the instructions of Engineer-In-Charge. Note: Foundation including reinforcement etc. as per Drawing. Cantilever Over head Sign gantry, frame/truss Size- 3.05 m x 1.525 m | | 1 | Number (Per Number) |
|---|
| 34 | 29 | Providing and fixing sign boards on the Cantilever gantry as provided in the item No. 28 above, of size 3.05m x 1.525m made out of retro-reflective sheeting of high intensity micro prismatic grade confirming to IRC:67 - 2012 Type IV standard fixed on 4mm thick Aluminum Composite Panels (ACP sheet) as base board with pressure-sensitive adhesive numerals etc.) and borders of Retro Reflective Boards with pressure-sensitive adhesive having 0.5 mm thick Aluminum on both sides. The message (legends, letters, numerals etc.) and borders of Retro Reflective Boards shall be of cut letters made in transparent overlay film pasted over the base sheeting with pressure sensitive adhesive or as instructed by the manufacturers or as directed by the Engineer-in-Charge. Note:- 1.) Work will be carried out as per MoRTH specification for road and bridges works (5th revision). 2 ) Retro-reflective sheeting of high intensity micro-prismatic grade confirming to IRC 67-2017 Type-IV Standard shall be of Avery Dennision/3M make only. 3.) Warranty and Durability as per clause 801.3.11 of MoRTH Specification 5th Revision will be applicable which is reproduced as under:- The contractor shall obtain from the manufacturer a ten year warranty for satisfactory field performance including stipulated retro-reflectance of the retro-reflective sheeting of micro-prismatic sheeting and a seven-year warranty for high intensity grade and submit the same to the Engineer. The warrenty shall be inclusive of the screen printed or cut oul etters/legends and their bonding to the retro-reflective sheeting. The contractor/supplier shall also furnish the LOT numbers and certification that the signs and materials supplied against the assigned work meets all the stipulated requirements and carry the stipulated warranty and that the contractor / supplier is the authorized convertor of the particular sheeting. All signs shall be dated during fabrication with indelible markings to indicate the start of warranty. The warranty shall also cover the replacement obligation by the sheeting manufacturer as well as contractor for replacement/repair/restoration of the retro-reflective efficiency. A certificate in original shall be given by the sheeting manufacturer that its offered retro-reflective sheeting has been tested for various parameters such as coefficient of retro-reflection, day/night time colour and luminance, shrinkage, flexibility, inear removal, adhesion, impact resistance, specular gloss and fungus resistance; the tests shall be carried out by a Government Laboratory in accordance with various ASTM procedures and the results must show that the sheeting has passes the requirements for all the above mentioned parameters. A copy of the test reports shall be attached with the certificate. | | 4.65 | Sqm. (Per Square meter) |
|---|
| 35 | 30 | Providing and fixing Logo Board of PMGSY size 600x600mm diamond shape with plate of size 900x250 mm made of 60 gauge sheet over frame of angle iror 25x5x3 as per PMGSY specifications & drawing, painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 | | 2 | Each (Per Number) |
|---|
| 36 | 31 | Providing and fixing public information board consisting of 75mm G.I. pipe of size 2.45 mtr x 1.15 mtr with 900mm x 900mm G.I. sheet 16 gauge connected/ welded with 5mm thick steel plate of 50mm duly painted as per column mentioned in the drawing and fixing at site in 60 x60 x 75cm cement concrete 1:2:4 block complete in all respect. | | 2 | Each (Per Number) |
|---|
| 37 | 32 | Construction of cement concrete PMGSY information board in CC 1:2.5:5 (M15) with skin reinforcement of 8 mm dia HYSD bars @ 300 mm C/C both ways size (as per drawing annexure-ii) including excavation, base concrete (M-15), priming, painting two coats synthetic enamel paint on new concrete surface including painting-figring Logo and Slogen including writing of all information about the road etc. complete. As directed by the Engineer incharge. | | 2 | Each (Per Number) |
|---|
| 38 | 33 | Providing and fixing steel plate/ steel tube citizen informatory sign boards as prescribed by NRRDA (with two information plates of 750mm x 980mm size each) & other specifications conforming to the MoRD specification 2004; all inclusive including excavation, concrete etc. Will supply warranty for sheeting Clause 801.3.11 Drawing attached at Page no ___of DNIT | | 1 | Each (Per Number) |
|---|
| 39 | 34 | Providing kilometer stone made of concrete as per specified design conforming to MoRD specification No. 1703, all inclusive, including cost of concrete, fixing, painting writing etc. ( conforming to MoRD specifications for Rural Roads-2004). | | 4 | Each (Per Number) |
|---|
| 40 | 35 | Providing and fixing 200 m stone made of concrete as per specified design conforming to MoRD specification no. 1703; all inclusive, including cost of concrete, fixing, painting, writing etc. ( conforming to MoRD specifications for Rural Roads-2004). | | 18 | Each (Per Number) |
|---|
| 41 | 36 | Providing and fixing boundary pillar stone made of concrete as per specified design conforming to MoRD specification no. 1703; all inclusive, including cost of concrete, fixing, painting, writing etc. ( conforming to MoRD specifications for Rural Roads-2004). | | 18 | Each (Per Number) |
|---|
| 42 | 37 | Providing & Marking center line / side line 2.5mm thick (minimum) with ho applied thermo-plastic road marking paint 10cms wide complete in all respect such as furnishing all labour, materials, tolls equipments including all incidental costs necessary for carrying out in work at site confirming to the technical specification as clause No. 1702 of MoRD specification . Each container of the thermoplastic material shall have the name trademark or other means of identification of manufacturer, batch number, date of manufacture color maximum application temperature and maximum heating temperature. The thermoplastic paint material shall be of Asian Paint-Apcomark/Berger-Sigmarc/Prismo. The glass beads shall be of Potters/Sovitec/Fleolite. The thermoplastic material shall be sampled and tested in accordance with appropriate ASTM/BS method. The contractor shall furnish to the Engineer-in-Charge a copy of certified test reports from the manufacturer of the thermoplastic material meet all requirement of the specifications. The reflectorzing glass beads shall meet the requirement of clause 803.4.2 and test methods mentioned in clause 803.4.2.4 shall be meticulously followed. The minimum thickness specified is exclusive of surface of glass beads .the method of thickness measurement shall be in accordance with appendix B and C of BS:3262 (part-3). Note:- Before start of work the contractor shall give brand . batch no. , manufacturing date of the material to be used and get approved the same from Engineer-In-Charge before use. | | 1122 | Sqm. (Per Square meter) |
|---|
| 43 | 38 | Pavement marker (Cat eyes)Molded shank raised pavement marker made polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a lad of 16000 Kg tested in accordance to ASTM D 4280 Type H. The height, width and length shall not exceed 50mm and 100mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall 35*1-5 degree.The strength of detachment of the intrgratedcyclindrical shanks(of diameter not less than 19+/-2mm and height no less than 30+/-2mm) from the body is to be a minimum value of 500 kg .Fixing will be bt drilling without nails and using epoxy resin based adhesive as per manufacturer's recommendation(of reputed make such as 3M etc.) | | 79 | Each (Per Number) |
|---|
| 44 | 39 | Providing and fixing retro-reflective hazard marker confirming to IRC 79:1981 of size 900x300 mm with back support of M S angle 25*5x3 mm and leg post of 80mm dia having 1.6mm thickness duly painted, 1500 mm high embedded into 0.3x0.3x0.45m M20 gradeConcreteaspersite requirements, micro- usingnon-metallic prismaticretro-reflectivesheet confirming to IRC: 6720'12 type IY specification fixed on 3 mm thick aluminum composite Material sheete as base having 0.5 mm thick aluminumon both sides. | | 32 | Each (Per Number) |
|---|
| 45 | 40.1 | The Rates Quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Mateial obtained from dismantling of existing brickwork , bituminous layer and granular layer, pipes have been calculated taking assumption that 80% of it theoritical material will be retrieved. The dismantled material can used in any of the item for the work after modification ( bringing it to required specifications ) after approval from employer. In case it is not possible to use this material on the work , the agency can take away this material. This material can be quoted is limited to reserve price fixed and mentioned as under. Good Bricks @ Rs. 4.50/- per Brick. | | 1070 | Each (Per Number) |
|---|
| 46 | 40.2 | Bricks Bats @ Rs. 4000/- per cum. | | 8.91 | Cum (Per cubic meter) |
|---|
| 47 | 40.3 | Mild Steel @ Rs. 30000/- per MT | | 0.3 | MT(Per metric tonne) |
|---|
| 48 | 41.42 | Note:- All quantities of the above materials have been worked out on the basis of theoritical quantities laid on this road. However, agency may visit site before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual sacrifying is found no lesser side , no claim of agency on this score will be entertained and full recovery on the basis of quoted rates and quantity exhibited in the entertained and full recovery on the basis of quoted rates and quantity exhibited in the BOQ shall be made . The reserve rates are minimum rates to be used as base for quoting purchase rates by the agency . No rates below the reserve price will be entertained and reserve price will be considered for all purpose in case the agency quotes lesser than reserve price.\nItem No. 42 to 46 : 9. The bidder is not required to quote his rate for routine maintenance. The rates to be paid for routine maintenance are indicated in the Bill of Quantities. Further, the payment for routine maintenance to the contractor shall be regulated based on his performance of maintenance activities\nRoutine Maintenance during 1st year after completion of constructions, as per bidding documents. | | 4.3 | Km (Per Km) |
|---|
| 49 | 43 | Routine Maintenance during 2nd year after completion of constructions, as per bidding documents. | | 4.3 | Km (Per Km) |
|---|
| 50 | 44 | Routine Maintenance during 3rd year after completion of constructions, as per bidding documents. | | 4.3 | Km (Per Km) |
|---|
| 51 | 45 | Routine Maintenance during 4th year after completion of constructions, as per bidding documents. | | 4.3 | Km (Per Km) |
|---|
| 52 | 46 | Routine Maintenance during 5th year after completion of constructions, as per bidding documents. | | 4.3 | Km (Per Km) |
|---|
| 53 | 47 | NOTE:- The bidder is not required to quote his rate for routine maintenance. The rates to be paid for routine maintenance are indicated in the bill of Quantities. Further, the payment for routine maintenance to the contractor shall be regulated based on his performance of maintenance activities as per chapter eleven of rular road in manual (IRC-SP-20-2002) available on contract data to general conditions of contract. \nNote:- In case of any difference in the unit of nomenclature of any of the HSR/MORD items depicted in the DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable | BI01010001010000000000000515BI0100001157 | | |
|---|
