Military Engineer Services-MES has published Repair To Flooring , Joinery , Plastering , Plumbing And B/R Work For Otm Accn At Dronachal Base Bhopal. Submission Date for this Tender is 12-10-2020. Civil Work Tenders in GE Dronachal Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: Repair to Flooring, Joinery, plastering,plumbing and B/R work for OTM Accn at Dronachal Base Bhopal | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply and fixing in repair 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, beads or in steel windows complete all as specified and directed. | 30 | Sqm | |
| 2 | 2 | Material and labour for Securing glass of any description in existing Metal/wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and as directed. | 450 | RM | |
| 3 | 3 | Supply and fixing in repairs 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane as incl removing of existing glass if required complete all as specified and directed. | 25 | Sqm | |
| 4 | 4 | Supply and fixing in repairs for figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as incl removing of existing glass if required complete all as specified and directed. | 10 | Sqm | |
| 5 | 5 | Fixing only in repairs existing sliding door bolt / tower bolt / handle / floor door stopper / helical door spring / hinges / hasp & staple, wooden pelmet boxes / drapery Rods of any size & material at any location complete all as specified and directed by Engineer-in-Charge. | 320 | Each | |
| 6 | 6 | M&L for Easing of door shutters, window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed. | 450 | Each Job | |
| 7 | 7 | M&L for Petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, PVC connection,, float valves, concealed stop cock, GI pipe joints bottle traps, PVC water tank, low level flushing cistern , CPVC/GI pipe fittings incl replacing & providing of good quality rubber washer check nuts plunges ,taflon tape, M-seal, brass spindles (specific type), GI/ brass/CPVC fittings etc or any other minor accessories / repairs to make the system all time functional , ensure smooth water supply without any wastage and stop water leakage complete all as specified and directed. | 700 | Each | |
| 8 | 8 | M&L for Repairs to existing aluminium door/ window shutter including frame with completely/partially taking down door shutter and tightening of all screws, replacing including provision of unservicable hinge, handle, lock, aluminium plate & floor door stopper directed by Engineer-in-Charge. | 120 | Each | |
| 9 | 9 | Supply and fixing 5mm thick tinted glass pan area exc 0.50 Sqm in each pan with rubber / neoprene bedding galzing clips including taking out old glass if required and necessary fittings | 4 | Sqm | |
| 10 | 10 | Supply and fixing in repair solar control film of any colour as available of 25 micron reflective type sticked to glass panes with suitabl adhisive as per instructions of manufacturers complete all as specified and as directed | 4 | SQM | |
| 11 | 11 | Supply and fixing in repair for 12.0 mm thick reflective tinted glass of any size and fixed with silicon weatehr proof sealant of approved make Dr fixit or heavy duty SS bracket on cladding any height incl. making hole or cutting opening, taking out old glass if required | 4 | Sqm | |
| 12 | 12 | Supply and fixing in repair 300mm long MS sliding door bolts ISI marked bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed. | 15 | Each | |
| 13 | 13 | Supply and fixing in repair MS barrel tower bolt ISI marked 150 mm long stove enameled black with bright bolt and fixed complete all as specified and directed. | 20 | Each | |
| 14 | 14 | Supply and fixing in repair MS pressed handles 125 mm size confirming to IS, oval type, stove enameled black complete all as specified and directed. | 25 | Each | |
| 15 | 15 | Supply and fixing in repair 150 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as directed. | 25 | Each | |
| 16 | 16 | Supply and fixing for mild steel handle right or left matching to existing for fixing with steel window with suitable nut bolt/welded material as specified and directed. | 130 | Each | |
| 17 | 17 | Supply and fixing for mild steel pag stay matching to existing for fixing with steel window with suitable nut bolt/welded material.as specified and directed. | 130 | Each | |
| 18 | 18 | Supply and fixing in repair 100 mm MS butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed. | 75 | Each | |
| 19 | 19 | Fixing with welding only in repairs n. exc 2.5cm in length & n. exc 6mm thickness of metal existing sliding door bolt / tower bolt / handle of any size & material by welding M/C at any location complete all as specified and directed by Engineer-in-Charge. | 35 | Each | |
| 20 | 20 | Fixing with running welding in repair of ms hinges, helical door springs, rolling shutter spare parts heavy MS garrage doors etc. thickness of material n. exc. 6mm complete all as specified and as directed. | 3 | RM | |
| 21 | 21 | Supply and fixing in repair 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished | 25 | Each | |
| 22 | 22 | Supply and fixing in repair ,4 lever Locks, cupboard, grade I, size 50 mm fixed with shutter with necessary cutting and fixing complete. | 18 | Each | |
| 23 | 23 | Supply and fixing in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed. | 35 | Each | |
| 24 | 24 | Supply and fixing in repair 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed. | 45 | Each | |
| 25 | 25 | Supply and fixing in repair 150mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed. | 45 | Each | |
| 26 | 26 | Supply and fixing in repair aluminium handles 150 mm size, cast type, anodised complete all as specified and directed. | 35 | Each | |
| 27 | 27 | Supply and fixing 100 mm butt hinges, excruded aluminium alloy type B-21 with galvanised mild steel ISI marked hinge pin, anodised and fixed with wooden screws complete as specified and directed. | 35 | Each | |
| 28 | 28 | Supply and fixing in repair Door closer aluminium (extruded) hydraulically regulated designation No 1 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed. | 12 | Each | |
| 29 | 29 | Supply and fixing in repair double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed. | 15 | Each | |
| 30 | 30 | Supply and fixing 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed. | 45 | Each | |
| 31 | 31 | Supply and fixing in repair for 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw as per specified. | 45 | Each | |
| 32 | 32 | Supply and fix in repair 25mm dia PVC coated decorative mild steel drapery/ curtain rod cut to required size and fixed to brackets as specified and as directed | 65 | RM | |
| 33 | 33 | Supply and fixing in repair 25mm dia PVC coated decorative mild steel drapery/ curtain bracket colour and pattern matching to exisitng curtain rod above all as specified and as directed | 45 | Pair | |
| 34 | 34 | Supply and fixing in repair 18 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination& side balancing white lamination fixed with screws to timber frame work including external fixing of teak wood lipping 6 mm thick with nails and french polishing to teak wood lipping | 32 | Sqm | |
| 35 | 35 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete. | 8 | Each | |
| 36 | 36 | -Ditto- all as per Srl item 35 here-in-before, but area exceeding 1.5 sqm and not exceeding 4.00 sqm each | 4 | Each | |
| 37 | 37 | Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete. | 25 | Per Leaf | |
| 38 | 38 | Taking down shutters of any description, area not exceeding 1 sqm each complete. | 5 | Per Leaf | |
| 39 | 39 | Taking down shutters of any description, area exceeding 2 sqm each complete. | 6 | Per Leaf | |
| 40 | 40 | Material and labour for taking down and refixing in same opening wooden shutter of any size including easing & adjusting and refixing with same hardware all as specified and directed. | 20 | Each Leaf | |
| 41 | 41 | Supply and fixing Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete. | 8 | RM | |
| 42 | 42 | All as per item No 41 here-in-before but of size 125 x 60 mm | 4 | RM | |
| 43 | 43 | Material and labour for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete. | 0.1 | Cum | |
| 44 | 44 | Material and labour for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed. | 0.1 | Cum | |
| 45 | 45 | Supply and fixing 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete. | 25 | Sqm | |
| 46 | 46 | Supply and fixing 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete. | 25 | Sqm | |
| 47 | 47 | Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. | 18 | Sqm | |
| 48 | 48 | Material and labour in Mild steel 0.63 mm thick plain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round haded screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitered angles etc as requires. | 4 | Sqm | |
| 49 | 49 | Material and labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings. | 55 | kg | |
| 50 | 50 | Supply and fixing solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified and as directed | 23 | RM | |
| 51 | 51 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified and as directed | 8 | Sqm | |
| 52 | 52 | Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron.Note:- Dismantling of this item will be considered under item no 35 or 36 as per item. | 14 | kg | |
| 53 | 53 | Supply and fixing aluminium anodised powder coated door shutters of aluminium section weighing minimum 0.55 kg/mtr including providing and fixing necessary jointing cleats, glazing clips, ruber neoprene packing , aluminium anodised powder coated fittings, tinted/ plain glass such as handle 2 nos, 100mm hinge 3 nos , 200 tower bolt 2 nos , mortice lock including keys 1 set , anodised aluminium snap beading & screws complete all as specified and directed Note :- Minimum thickness of powder coating 50 micron. | 4 | SQM | |
| 54 | 54 | Supply and fixing aluminium anodised powder coated window and ventilator shutters side hung type with or without sash bars of aluminium section weighing minimum 0.55 kg/mtr including necessary jointing cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading , screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no ) , hinge type B-21 100mm long (2 nos) suitable handle (2 no) tower bolt ( 2 nos). | 5 | SQM | |
| 55 | 55 | Supply and fixing Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete. | 99 | Each | |
| 56 | 56 | Supply and fixing aluminium handles extruded type of size 125mm, complete all as specified and directed. | 70 | Each | |
| 57 | 57 | Supply and fixing 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete. | 68 | Each | |
| 58 | 58 | Supply and fixing 300 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cost or extruded sections or cost alumminium alloy complete all as specified and directed. | 10 | Each | |
| 59 | 59 | Supply and fixing in repair IInd class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimetres each complete all as specified and directed. | 20 | Each | |
| 60 | 60 | Supply and fixing galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. | 26 | Sqm | |
| 61 | 61 | Dismantling of old unservicable steel window with frame and making good the opening to be prepared for fixing of new steel window by plastering using CM 1:4 and matching with exising finishing i.e. OBD/ white wash complete all as specified and as directed | 10 | SQM | |
| 62 | 62 | Supply & fixing steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, complete as specified and directed. | 6 | Sqm | |
| 63 | 63 | Ditto as per item 62 but without glazing bars complete all specified and directed. | 6 | Sqm | |
| 64 | 64 | Supply and fixing steel ventilator with top hung shutter including hinges, steel peg stay, complete | 3 | Sqm | |
| 65 | 65 | Supply and fixing framed work such as grills, gratings, etc. with end of bar shouldered and/or riveted or forged in to spikes framed gaured bars barred iron doors, ladders, framed blausters, walk ways, railings, frame work of water tanks and similar work confirming to Fe 290 Gde-E-165 | 55 | kg | |
| 66 | 66 | Material and labour for Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed. | 110 | Sqm | |
| 67 | 67 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed. | 53 | Sqm | |
| 68 | 68 | Supply and fixing in repair light coloured vitreous china wash hand basin white available shape as approved of 500mmx400mm (minimun) on new pre-painted brackets excluding taps but including 32 mm bore waste fittings, brass, chromium plated etc complete all as specified . | 20 | Each | |
| 69 | 69 | Supply and fixing in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes and bed concrete etc complete | 6 | Each | |
| 70 | 70 | Supply and fixing in repair Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete with fixing bolts complete | 6 | Each | |
| 71 | 71 | Supply and fixing in repair Plastic water closet seat,any colour as available, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete. | 6 | Each | |
| 72 | 72 | Supply and fixing in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)all as specified and directed . | 5 | Each | |
| 73 | 73 | Supply and fixing in repair Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe fixed in repairs (excluding flushing cistern, flush pipe and waste pipe) all as specified. | 2 | Each | |
| 74 | 74 | Supply and fixing in repair Urinal spreader of CP any colour for fixing with 15mm dia pipe. (Minimum weight 60gms). | 4 | Each | |
| 75 | 75 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete. | 5 | Cum | |
| 76 | 76 | Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed. | 40 | Sqm | |
| 77 | 77 | Material and labour PCC 1: 2 : 4 type B-1 ( using 20mm graded crushed stone agg.) 40mm thick as in floor finishing surfaces of conc topping even and smooth with using extra cement . | 40 | Sqm | |
| 78 | 78 | Supply only glass dividing strips ,3mm thick, 38 mm wide laid in position conforming to design pattern as approved by Engr-in-Charge. | 30 | RM | |
| 79 | 79 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete. | 42 | Sqm | |
| 80 | 80 | Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust incl. brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed | 90 | Sqm | |
| 81 | 81 | Material and labour for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete. | 6 | Sqm | |
| 82 | 82 | Material and labour for glazed ceramic tiles coloured digital with highlighter and approved design and pattern by G E of size 450x300 x 7mm / 300 x 600 x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles over and including 10mm thick rendring in CM (1:4) complete all as specified and directed. | 16 | Sqm | |
| 83 | 83 | Material and labour for glazed ceramic tiles coloured of size 300 x 200x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles over and including 10mm thick rendring in CM (1:4) complete all as specified and directed. | 18 | Sqm | |
| 84 | 84 | Material and labour for non skid-ceramic tiles coloured of size area of each tile exc.0.06 sqm but not exc . 0.11 sqm (300 x 300 mm) X 7mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to match over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed | 8 | Sqm | |
| 85 | 85 | Material and labour Non skid coloured ceramic tiles 7 to 8 mm thick area of each tils exc.0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed | 42 | Sqm | |
| 86 | 86 | All as per item No 85 but in skirting, vertical surface dadoes and riser etc. over and including 10mm thick rendring in CM (1:4) complete all as specified and directed. | 4 | Sqm | |
| 87 | 87 | Material and labour light shed vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed | 40 | Sqm | |
| 88 | 88 | All as per item No 87 but in skirting, vertical surface dadoes and riser etcover and including 10mm thick rendring in CM (1:4) complete all as specified and directed. | 4 | Sqm | |
| 89 | 89 | Material and labour for 20-25 mm thick machine cut mirror polished kota stone slab af any size as required and directed by the Engineer in Charge , laid over and including cement screed of 15mm thick in CM 1:6 laid & jointed with gray cement slorry mixed with pigment to match the shade of the slab complete all as specified and as directed. | 12 | Sqm | |
| 90 | 90 | All as per item No 89 but in skirting, vertical surface dadoes and riser etc over and including 10mm thick rendring in CM (1:4) complete all as specified and directed. | 4 | Sqm | |
| 91 | 91 | Material & labour machine cut cudappah stone slabe 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed | 6 | Sqm | |
| 92 | 92 | Material & labour for 16 to 18 mm thick fine grained granites required at site of any size machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, grinding and polishing over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed. | 4 | Sqm | |
| 93 | 93 | All as per item No 92 but in skirting, vertical surface dadoes and riser etc over and including 10mm thick rendring in CM (1:4) complete all as specified and directed. | 3 | Sqm | |
| 94 | 94 | Material and labour for mirror polished rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete as directed. | 5 | Rm | |
| 95 | 95 | Supply and fixing in repair CPVC pipe 15mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to walls, floors, or ceiling or laid in floors etc complete. Make :- Plasto , Astral , Finolex | 28 | RM | |
| 96 | 96 | Supply and fixing in repair CPVC pipe 20mm dia of grade SDR-11 (class-I) ISI marked including all CPVC and brass fittings fixed to walls, floors, or ceiling or laid in floors etc complete. Make :- Plasto , Astral , Finolex | 12 | RM | |
| 97 | 97 | Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed by E-in Charge for following capacity including writinf with oil paint the date of cleaning on tank ; | |||
| 98 | 97.1 | (a) Exc 250 Ltrs but not exc 500 Ltrs | 100 | Each | |
| 99 | 97.2 | (b) Exc 500 Ltrs but not exc 1000 Ltrs | 40 | Each | |
| 100 | 98 | Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc & and 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball including taking down existing tank complete. | 4 | Each | |
| 101 | 99 | Supply and fixing rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc and 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball including taking down existing tank complete . | 1 | Each | |
| 102 | 100 | Supply and fixing 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15mm/20mm (using reducer) and fixed | 5 | Each | |
| 103 | 101 | Supply and fixing in repair PVC over tank cover of size 250 ltr upto 500 ltr capacity | 80 | Each | |
| 104 | 102 | Supply and fixing in reapir PVC over tank cover of size anove 500 ltr to 1000 ltr capacity | 60 | Each | |
| 105 | 103 | Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shankSupply and fixing ly nuts for iron pipe of 15mm bore fancy type. | 19 | Each | |
| 106 | 104 | Supply and fixing ixed in repairs of fancy type chromium plated Bib tap, 15mm bore any make as given in list of makes as specified and as directed. | 45 | Each | |
| 107 | 105 | Supply and fixing ixed in repair of CP brass fancy type stop cock with long shank & as concealed type/ angular type . | 28 | Each | |
| 108 | 106 | Supply and fixing in repair 15mm brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed | 4 | Each | |
| 109 | 107 | Supply and fixingixed in repair CP soap dish all as specified and directed. | 20 | Each | |
| 110 | 108 | Supply and fixingixed in repair CP Paper holder for EWC all as specified and directed. | 20 | Each | |
| 111 | 109 | Supply and fixingixed in repair brass chromium plated shower rose size not less than 50 mm dia with swivel joint and arm not less than 20 cm long all as specified & directed | 21 | Each | |
| 112 | 110 | Supply and fixing ixed in repair of bib taps standard of PTMT any colour high pressure screwed for iron pipe & fixed minimum weight 15 mm 90gm/each (Make-PRYAG) | 55 | Each | |
| 113 | 111 | Supply and fixing in repair 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe.(Minimum weight 15mm-90gms) | 12 | Each | |
| 114 | 112 | Swivel shower of PTMT any colour for fixing with 15 mm pipe (minimum weight 40 gm), supplied and fixed in repairs complete. Make:- Prayag | 10 | Each | |
| 115 | 113 | Supply and fix in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete.Make Prayag | 25 | Each | |
| 116 | 114 | S&Fixed in repair two way CP brass fancy type bib cock 15mm bore all as specified . Min (250 gms) complete all as specified and directed | 15 | Each | |
| 117 | 115 | S&F in repair brass chromium plated handspray with flxible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15mm bore pipe complete all as specified and directed | 5 | Each | |
| 118 | 116 | S&F in repair brass chromium plated urinal jet spray with included pvc conection for suitable for urinal and including necessary fitting complete all as specified and directed | 8 | Each | |
| 119 | 117 | Supply and fixing in repair glass self made out of 8mm thick 600mm long glass piece round edged, SS railing fixed to wall with 2 nos heavy duty SS bracket. Make:- Jaquar(Continental) or equivalent | 4 | Each | |
| 120 | 118 | Supply and fixing in repair corner glass self made out of 8mm thick 225mm x 225mm size glass piece round edged, SS railing fixed to wall with 2 nos heavy duty SS bracket. Make:- Jaquar (Continental) or equivalent | 4 | Each | |
| 121 | 119 | Supply and fixing ixed in repair of aluminium hat pegs, solid body, 125mm to 175 mm sets of 3 Nos peg set complete all as specified and directed. | 8 | Each | |
| 122 | 120 | Supply and fixing in repair aluminium hat pegs, solid body 175mm to 250 mm , peg sets of 6 Nos peg set of good quality complete all as specified and directed | 4 | Each | |
| 123 | 121 | Supply and fixing in repair PVC Mirror cabinet of size 450 x 300 mm with doorshutter complete all as specified . | 4 | EACH | |
| 124 | 122 | Supply and fixing mirror of 5mm thick glass of selected quality bevelled edge size 1.00 x 1.2mtr including providing 8 nos of stainless steel heavy duty bracket to fix in wall complete all as specified and as directed. Note :- S/S bracket should be chosen such that mirror and wall must have a gap of 2 to 3mm after fixing.Bracket to be fixed properly in wall. | 8 | Each | |
| 125 | 123 | Supply and fixing only in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers | 4 | Each | |
| 126 | 124 | Material and labour for sunken floor treatment as follows:- \nNote : Water tightness testing should be done after applying Dr Fixit epoxy compound, by pounding water for 72 hours & rectify defects if any till total elimination of defect. Dubrish to be removed outside MD land. \n | |||
| 127 | 124.1 | Demolition of cement concrete in sunken floors incl. removing dubrish outside MD land complete all as specified and directed. | 2 | Cum | |
| 128 | 124.2 | (ii) Brushing neat cement slurry with 3.0kg of cement per sq. metre mixed with WPC @ 3% by weight of cement as per manufacturer's instruction to fill all hole and crack complete all as specified and as directed. Note:- Water tightness testing should be done after 24 hours | 8 | SQM | |
| 129 | 124.3 | (ii) Material and labour for PCC (1:1 1/2 :3) type A-0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. \nNote : Water proofing compound will be measured and paid separately. | 0.05 | Cum | |
| 130 | 124.4 | (iii)Material and labour for plastering on vertical sides and top surface of CM (1:3) 15 mm thick mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green i.e. PCC & plaster be carried out at the same time. \nNote : Water proofing compound will be measured and paid separately. | 8 | SQM | |
| 131 | 124.5 | (iv) Material and labour for 2 coats of Dr. Fixit krystalline waterproofing coating compound shall be applied after laying sewage/ plumbing pipes with fixtures in position. | 8 | SQM | |
| 132 | 124.6 | (v)Material and labour for filling the sunken floor with PCC ( 1:5:10) type E-2 using bk aggregate over the treated surface. | 1.2 | Cum | |
| 133 | 124.7 | (vi) Material and labour spouts of 50mm dia GI pipe light grade projecting 450mm clear of face outer wall with PVC mosquito proof cap on inner face of pipe shall be provided to drain out seepage water , if any. | 1.5 | RM | |
| 134 | 125 | Supply and fixing ixed in repair PVC Flexible waste pipe 32/40 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed. | 100 | Each | |
| 135 | 126 | Supply and fixing in repair brass chromium plated kitchen sink waste coupling comperising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleeve with 32mm outlet and check of any dia as per site requirement complete all as specified and directed. | 5 | Each | |
| 136 | 127 | Dismantling of ceiling boards of any type and any thickness including cover fillets complete. | 10 | Sqm | |
| 137 | 128 | Supply and fixing 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous & calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling & tapping screws having Phillips head with under head cutter at 200 mm C/C including finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish ( Frame work for ceiling shall be measured & paid separately) | 15 | Sqm | |
| 138 | 129 | Material and labour GI frame work, size of grid 605 x 605 mm, for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeeves and screws at 450 mm centre tocentre / intermediate channel 0.9mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed. | 15 | Sqm | |
| 139 | 130 | Material and labour for preparation of new calcium silicate false ceiling surface and applying two coats of oil bound distamper complete all as specified and directed. | 15 | Sqm | |
| 140 | 131 | Supply and fixing 100mm wide factory made glass reinforced cement decorative moulded type wall cornice of approved design fixed at site as per manufacturer's instruction. Make:- Birla white or equivalent | 10 | RM | |
| 141 | 132 | Material and labour for overhauling of steel rolling shutter with or without bevel gear box of size exc. 9.00 sqm but not exc 25 sqm each including taking down and refixing in same opeing, greasing, oiling and miscellaneous repairs,welding etc including providing and replacing unserviceable bottom lock plate, bracket plate, crank handle,curtain links fittings, guide channel,pipe shaft, lock plate, pulling hook, handle , sliding lock and other MS spare parts required at site complete all as specified and directed. | 5 | Each Job | |
| 142 | 133 | Supply only ball bearing for steel rolling shutter as per site requriment | 3 | Each | |
| 143 | 134 | Supply and fixing bevel gear box with complete assembly for steel rolling shutter as per site requirment complete all as specification and dircted. | 3 | Each Job | |
| 144 | 135 | Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc. | 77 | Sqm | |
| 145 | 136 | Material and labour for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying three coats of white wash complete. | 40 | Sqm | |
| 146 | 137 | -Ditto- all as per Srl item No.136 here-in-before, but 15mm thick in cement mortar 1:4 finished fair and even using integral waterproofing compound including Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete. Note:-Supply only of WPC shall be measured and paid separately. | 25 | Sqm | |
| 147 | 138 | Material and labour for rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete. | 12 | Sqm | |
| 148 | 139 | Supply only integral water proofing compound | 14 | kg | |
| 149 | 140 | Material and labour for brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 including demolition & removing dubrish outside MD land complete all as specified and as directed . | 1.2 | Cum | |
| 150 | 141 | Supply & fixing in repair PVC door seal strips of size not less than 900mm x 15mm including necessary screw compelet all as specified and directed. | 60 | RM | |
| 151 | 142 | Supply & fixing in repair 110mm PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls including clamps of the following bore | 28 | RM | |
| 152 | 143 | Supply & fixing in repair 110mm PVC (SWR) pipe bend with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface . | 10 | Each | |
| 153 | 144 | Petty repairs to servicable sensor & fancy plumbing fittings by authorised agent including providing & replacing genuin company manufactured spare parts if required at site complete all as specified and as directed. | 9 | Each | |
| 154 | 145 | Demolition of stone slab of any description and thickness in floors etc laid bedded and pointed in any mortar | 2.9 | Per 10 Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
