| 1 | 1 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc. | | 300 | Sqm |
|---|
| 2 | 2 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement complete all as specified and directed.\nNote:- Area includes in this items upto 4 stories of building. | | 100 | Sqm |
|---|
| 3 | 3 | M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed. | | 150 | Sqm |
|---|
| 4 | 4 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed. | | 50 | Sqm |
|---|
| 5 | 5 | M&L for rendering 10 mm thick in CM (1:3) on RCC Chajja / Facia / Roof projection over 20mm thick in CM 1:4 as doubing coat including cleaning of old wornout concrete,taking down plaster & applying a coat of RBR compund for proper bond of old and new concrete surface etc complete all as specified and as directed \nNotes : The Area includes in this items up to 4 th stories building necessary arrengments incl in the quoted cost. | | 50 | Sqm |
|---|
| 6 | 6 | Cutting holes into or through bricks walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required suerficial area exe 150 sqcm.and not exc 400 Sq cm | | 1200 | per CM of Depth |
|---|
| 7 | 7 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening FE-410-W Gde (E-250 quality) and fixing complete all as specified and as directed | | 400 | KG |
|---|
| 8 | 8 | Demolition reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Shelves and similar suspended work (reinforcement cut as required to facilitate demolition) | | 9.6 | Cum |
|---|
| 9 | 9 | M&L for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roofs, chajjas,Shelves, beams complete all as specified and directed. | | 9.6 | Cum |
|---|
| 10 | 10 | Use and waste of form work to Chullah hoods, chajjas, shelves, weather shades,suspended slabs, corbels, water troughs and similar items including edges rough finished surfaces of concrete complete all as specified and directed | | 96 | Sqm |
|---|
| 11 | 11 | S&F mild steel TMT bars 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed | | 1010 | Kg |
|---|
| 12 | 12 | Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads and removal for site complete all as specified and directed by Engineer-in-Charge | | 1 | Sqm |
|---|
| 13 | 13 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty or fixing in NCL window with rubber beading in square n exc 0.5 sq.m. in each pane complete all as specified and directed by Engineer-in-Charge | | 1 | Sqm |
|---|
| 14 | 14 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed. | | 66 | Each |
|---|
| 15 | 15 | Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) complete all as specified and directed. | | 5 | Each |
|---|
| 16 | 16 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed | | 40 | Each |
|---|
| 17 | 17 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment all as specified and directed | | 10 | Each |
|---|
| 18 | 18 | S&F window/ventilator section of frame 72x55 mm fixed to wall or concrete surface with rawl plugs made, of galvanized steel powder coated and section of shutter 47x20 mm, mulion section 72x50 mm (Base steel as per IS 513 \"D\" quality galvanized as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6 mm including grills/guard bars made of square bars powder coated fixed to windows frame with screws at 150mm c/c both ways, 4 to 5 mm thick plain/figured sheet glass , 0.36mm stainless steel wire cloth with 1.40mm aperture necessory fittings and all builders hardware such as handles, tower bolts & stays etc. complete all as specified and as directed Make:- NCL type-4000 series. | | 33 | Sqm |
|---|
| 19 | 19 | S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed. | | 25 | RM |
|---|
| 20 | 20 | S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed. | | 25 | RM |
|---|
| 21 | 21 | S&F solid PVC door frame of size 50mm x 95mm made out of 5 mm wood grain printed PVC sheet reinforced with MS Squre Tube in opening etc complete all as specified and as directed | | 143 | RM |
|---|
| 22 | 22 | S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including rawl plugs etc in the frame at site as per specification & drawing etc complete all as specified as directed. | | 42 | Sqm |
|---|
| 23 | 23 | S&F IInd class hard wood 35mm thick Plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply on both faces. (The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated) complete all as specified and directed | | 30 | Sqm |
|---|
| 24 | 24 | S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. | | 18 | Sqm |
|---|
| 25 | 25 | S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed | | 35 | Sqm |
|---|
| 26 | 26 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed | | 26 | Sqm |
|---|
| 27 | 27 | M&L for preparation of new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed | | 181 | Sqm |
|---|
| 28 | 28 | Supply and fix Godrej pattern mild steel cup board with shutter made out of 18 guage M.S. sheet 60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long. The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured) complete all as specified and as directed. | | 30 | Sqm |
|---|
| 29 | 29 | M&L for 18/19mm thick Block Boards, grade 1 quality , exterior grade, commercial type, fixed with screws to timber frame work. | | 10 | Sqm |
|---|
| 30 | 30 | S&F 100mm size, hasp and staple safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-charge. | | 5 | Each |
|---|
| 31 | 31 | S&F factory made PVC frame of size 75 x 40mm with wall thickness of 4mm made out of extruded 4 mm thick prelaminated PVC sheet reinforced with 15 x 15 mm MS squre tube of gauge 19 gauge thickness through out the frame and mitred cut and two corners and jointed with two nos of 150mm long bracket of 10 x 10 mm MS square tube. the door frame shall be fixed to wall using 60 x 100 mm long MS screw through the frame by using PVC fastners minimum of four Nos of screw to be provided for each vertical members and minimum of two nos of screw to be provided horizontal members etc complete all as directed. | | 20 | RM |
|---|
| 32 | 32 | S&F factory made PVC shutter in required size at shape made out of 18mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure complete including required frame work. The panels shall be fabricated using adhesive, screws and solvent cement etc where ever required all the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent complete all as directed by Engr-in-Charge. | | 50 | Sqm |
|---|
| 33 | 33 | S&F factory made PVC shutter in required size at shape made out of 5mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure complete including required frame work. The panels shall be fabricated using adhesive, screws and solvent cement etc where ever required all the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent complete all as directed by Engr-in-Charge. | | 20 | Sqm |
|---|
| 34 | 34 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed by Engineer-In- Charge. | | 35 | Each |
|---|
| 35 | 35 | S&F 30mm wide flaps continuous (Piano) hinges mild steel bright finish complete all as specified and directed by Engineer-In- Charge. | | 24 | RM |
|---|
| 36 | 36 | S&F 40 mm dia cup boards knobs fixed with nut , screw and washer of mild steel , bright finished Complete all as specified and directed. | | 33 | Each |
|---|
| 37 | 37 | S&F Mild steel sliding door bolts 300mm long with hasp, staple (bolt type) , stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete | | 30 | Each |
|---|
| 38 | 38 | S&F Mild steel barrel tower bolts, 150mm size, stove enamelled black, with bolt complete all as specified and directed | | 100 | Each |
|---|
| 39 | 39 | S&F aluminium anodised barrel tower bolt of extruded section 200mm size, stove enamelled black, with bolt complete all as specified and directed | | 60 | Each |
|---|
| 40 | 40 | S&F 150mm long mild steel pressed handle, oval type, stove enamelled complete all as specified and directed | | 100 | Each |
|---|
| 41 | 41 | S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed | | 60 | Each |
|---|
| 42 | 42 | S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm. | | 30 | Each |
|---|
| 43 | 43 | S&F stainless steel 100 mm long butt hinges for PVC door shutters and frames complete all as specified and directed by Engineer-in-Charge. | | 90 | Each |
|---|
| 44 | 44 | Supply only Butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed | | 40 | Each |
|---|
| 45 | 45 | S&F 300mm long ordinary rat tail rod pattern spring, including roller and roller plate. | | 5 | Each |
|---|
| 46 | 46 | Supply only Butt Hinges, 50mm size, medium weight, cold rolled mild steel complete all as specified and directed | | 10 | Each |
|---|
| 47 | 47 | Demolition of Cement Concrete in sunken floors and pavings exc 15 cm thickness above ground level and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed. | | 2.4 | Cum |
|---|
| 48 | 48 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:3 with water proofing compound, finishing even and smooth without using extra cement complete all as specified and directed | | 19 | Sqm |
|---|
| 49 | 49 | Supply only integral water proofing compound. | | 4.79 | Kg |
|---|
| 50 | 50 | M&L for applying evenly a coat of epoxy compound of Dr Fixit or equalvent as approved by Engrineer-In-Charge as in sunken portion of WC including cleaning surfaces complete all as specified and as directed | | 19 | Sqm |
|---|
| 51 | 51 | M&L for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete complete all as specified and directed | | 1.64 | Cum |
|---|
| 52 | 52 | M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in floor finishing even and smooth without using extra cement complete all as specified and directed | | 19 | Sqm |
|---|
| 53 | 53 | Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed | | 48.1 | XSqm |
|---|
| 54 | 54 | M&L for Non skid Double-charged, ceramic coloured tiles 9 to 10 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed. | | 210 | Sqm |
|---|
| 55 | 55 | M&L for non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size 400mmx400 mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed. | | 60 | Sqm |
|---|
| 56 | 56 | M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete wall surface as backing coat of dado/skirting etc complete all as specified and as directed | | 210 | Sqm |
|---|
| 57 | 57 | M&L for Glazed ceramic tiles coloured 300mmx 450mm, 6 to 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match etc on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match etc complete all as specified and directed. | | 210 | Sqm |
|---|
| 58 | 58 | M&L for granite (of any type) stone slab 20mm thick machine cut and machine polised, in skirting, Kitchen platform /dado etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall & including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-In- Charge. | | 20 | Sqm |
|---|
| 59 | 59 | S&F in repair sinks made od stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf walls , or including fixing cantilever brackets and connecting union to waste pipe overall size 495mmx 330mmx 160mm including waste coupling and waste pipe complete all as specified and as directed by Engr-in-charge. | | 6 | Each |
|---|
| 60 | 60 | S&F in repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest, 'P' or 'S\" trap cement concrete bedding complete all as specified and directed. | | 6 | Each |
|---|
| 61 | 61 | Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve float, handle including bracket complete all as specified and directed with glaged finish. | | 6 | Each |
|---|
| 62 | 62 | Supply only Flush pipe of polythylene of low or high density or PVC,32mm dia for low level cistern. | | 6 | Each |
|---|
| 63 | 63 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm. | | 24 | Each |
|---|
| 64 | 64 | S&F in repair 600mm x 450mm mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers with aluminium beading all around complete all as specified and directed | | 6 | Each |
|---|
| 65 | 65 | S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed | | 6 | Each |
|---|
| 66 | 66 | S&F in repair chromium plated shower roses 125 mm with or without swivel joints,any size including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and directed. | | 6 | Each |
|---|
| 67 | 67 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. | | 6 | Each |
|---|
| 68 | 68 | Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed | | 2 | Cum |
|---|
| 69 | 69 | M&L for brick work with sub class \"B\" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed | | 2 | Cum |
|---|
| 70 | 70 | S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr. | | 20 | Each |
|---|
| 71 | 71 | Disconnecting existing tanks 500 ltr capacity, setting aside (or lowering of required) for repairs , cleaning, etc. and hoisting if required reconnecting and refixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc and write date of cleaning on tank complete all as directed by Engr-in-Charge. | | 100 | Each |
|---|
| 72 | 72 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. | | 15 | Each |
|---|
| 73 | 73 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed | | 15 | Each |
|---|
| 74 | 74 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore complete all as specified and as directed | | 15 | Each |
|---|
| 75 | 75 | S&F and testing galvanised steel tubing 15mm bore “medium grade” with all fittings complete fixed to wall surfaced/concelled incl Taking down or up steel tubing 15mm bore and connections and complete all as specified and directed | | 100 | RM |
|---|
| 76 | 76 | S&F and testing galvanised steel tubing 20mm bore “medium grade” with all fittings complete fixed to wall incl Taking down or up steel tubing 20mm bore and connections and complete all as specified and directed | | 50 | RM |
|---|
| 77 | 77 | Taking down or up galvanised steel tubing 15mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and directed | | 100 | RM |
|---|
| 78 | 78 | Taking down or up galvanised steel tubing 20mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and directed | | 50 | RM |
|---|
| 79 | 79 | S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore dia pipe complete all as specified and as directed | | 12 | Each |
|---|
| 80 | 80 | S&F in repair Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed 15 mm dia bore dia pipe complete all as specified and as directed. | | 6 | Each |
|---|
| 81 | 81 | S&F in repair Bib taps, cast copper alloy chromium plated, fancy type with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed for 15 mm dia bore dia pipe complete all as specified and as directed. | | 36 | Each |
|---|
| 82 | 82 | S&F 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed | | 6 | Each |
|---|
| 83 | 83 | S&F in repair vitreous China wash basin white, flat back size 550x400mm including S&F 32mm dia waste coupling, waste PVC pipe complete all as specified and as directed. | | 6 | Each |
|---|
| 84 | 84 | Taking down cast iron soil waste and vent pipes of any description with fitting and making good to disterbed surfaces. | | 30 | RM |
|---|
| 85 | 85 | S & F for 100 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and directed by Engineer-in-Charge | | 12 | RM |
|---|
| 86 | 86 | S & F for 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and directed by Engineer-in-Charge | | 12 | RM |
|---|
| 87 | 87 | S & F for 50 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls including necessry GI stack clamps complete all as specified and directed by Engineer-in-Charge | | 6 | RM |
|---|
| 88 | 88 | S & F for 100 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge | | 6 | Each |
|---|
| 89 | 89 | S & F for 100 mm bore cast iron branch piece, \"T\" , single (equal or unequal) ordinay or inverted (spigot or socket type ) or with parallel branches complete all as specified and directed by Engineer-in-Charge | | 6 | Each |
|---|
| 90 | 90 | S & F for 75 mm bore out let cast floor trap with gratings including jointing to waste pipe fixed in cement concrete type (B-1) 1:2:4 etc complete all as specified and directed by Engineer-in Charge | | 6 | Each |
|---|
| 91 | 91 | S & F 75 mm bore cast iron T including jointing and laid in trenches complete all as specified and directed by Engineer-in-Charge | | 6 | Each |
|---|
| 92 | 92 | S & F for 75 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge | | 6 | Each |
|---|
| 93 | 93 | S & F cast iron cowls of 50 mm size complete all as specified and directed by Engineer-in-Charge | | 6 | Each |
|---|
| 94 | 94 | S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cmx75cmx30cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed | | 15 | Each |
|---|
| 95 | 95 | M&L for three coats of white wash on New plaster surface of ceiling including prepration of surface. | | 100 | Sqm |
|---|
| 96 | 96 | M&L for One coats of white wash on old plaster surface of ceiling including prepration of surface. | | 1600 | Sqm |
|---|
| 97 | 97 | M&L for preparation of old plaster surface of walls and applying two coats of white wash over a coat of cement primer complete as specified and as directed. | | 50 | Sqm |
|---|
| 98 | 98 | M&L for preparing new plastered surface of walls and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed | | 150 | Sqm |
|---|
| 99 | 99 | M&L for completely removal of the existing treatment by wire brushing or sand paper or other scraping material as required from wall including prepration of surfaces complete as specified and directed. | | 750 | Sqm |
|---|
| 100 | 100 | M&L for preparing Old plastered surface of walls and applying two coat of oil bound distemper white or any tint etc complete as specified and directed | | 1500 | Sqm |
|---|
| 101 | 101 | M&L for preparing Old plastered surface of walls and applying one coat of oil bond distemper white or any tint etc complete as specified and directed | | 4500 | Sqm |
|---|
| 102 | 102 | M&L for 2mm thick birla white putty and making the surface smooth etc complete as specified and directed | | 1700 | Sqm |
|---|
| 103 | 103 | M&L for preparation of newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed.\nNotes : the Area includes in this items up to 6th storied building. | | 100 | Sqm |
|---|
| 104 | 104 | M&L for preparation of old plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed.\nNotes : the Area includes in this items up to 6th storied building. | | 2200 | Sqm |
|---|
| 105 | 105 | M&L for completely removal of the existing treatment from wall,chajjas,facia and preparing plaster surface of wall and applying two coat of exterior weather proof paint over a coat of primer etc complete all as specified and directed.\nNote : the area includes in this items upto 4th storied building. | | 150 | Sqm |
|---|
| 106 | 106 | M&L for preparation of newly plastered surface of wall,chajjas,facia and applying two coat of exterior weather proof paint over a coat of primer etc complete all as specified and directed.\nNote : the area includes in this items upto 4th storied building. | | 50 | Sqm |
|---|
| 107 | 107 | M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed | | 151 | Sqm |
|---|
| 108 | 108 | M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces | | 50 | Sqm |
|---|
| 109 | 109 | S&F in repairs stainless steel decorative curtain rod of 25 mm bore including stainless steel finale & bracket etc complete all as specified and as directed | | 90 | RM |
|---|
| 110 | 110 | Removing excavated / demolished materials exc 250 m but n-exc 500m and depositing complete all as specified & directed by Engr -in charge. | | 1 | Cum |
|---|
| 111 | 111 | M&L for Surface Preparation incl Surface to be free from APP Membrain , frost, surface laitance and contamination and free from loose aggregate, incl taking down cement plaster and appliying cement plaster with CM 1:4 smooth finish for application of waterproof coating primer the surface clean with water complete all as directed by Engr-in-Charge. | | 50 | Sqm |
|---|
| 112 | 112 | M&L for applying evenly 3 coat of elastomeric liquid applied membrane of Home Shield PU roofkoat of Berger or equalvent as approved by Engrineer-In-Charge as in Roof portion where leakage and seepage are noticed complete all as specified and as directed by approved applicater.\nNote :- Authorised applicater is approved by GE. | | 50 | Sqm |
|---|