Special Repair To Bldg No P 75 In Gagan Vihar At Rangapahar Mil Stn
Tender Value
21.34 Lakhs
Estimated cost
Bid Submission
07 Oct 2020
0 days left
EMD
42700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rangapahar → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Bldg No P 75 In Gagan Vihar At Rangapahar Mil Stn
BOQ
| Name of Work: SPECIAL REPAIR TO BLDG NO P-75 IN GAGAN VIHAR AT RANGAPAHAR MIL STN | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc.15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. | 10 | Cum | |
| 2 | 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. | 217 | Sqm | |
| 3 | 3 | Material and labour for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base of floor finished the surface fair and even to receive subsequent layer complete all as specified and as directed. | 90 | Sqm | |
| 4 | 4 | Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm shall be laid on floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour / shade of tiles over and including 15mm thick screed bed / bedding layer in CM (1:6) complete all as specified and as directed. | 90 | Sqm | |
| 5 | 5 | Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm shall be laid on wall / column / vertical surfaces as in dado / skirting set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour / shade of tiles over and including 10mm thick cement plastering / backing coat in CM (1:4) complete all as specified and as directed. | 4 | Sqm | |
| 6 | 6 | Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm shall be laid on floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour / shade of tiles over and including 15mm thick screed bed / bedding layer in CM (1:6) complete all as specified and as directed. | 20 | Sqm | |
| 7 | 7 | Material and labour for glazed ceramic coloured tiles (Premium Quality) of size 300 mm x 200 mm / 350 mm x 250 mm, 7mm to 8 mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed. | 80 | Sqm | |
| 8 | 8 | Material and labour for 20-25 mm thick machine cut kota stone slab shall be laid on floor, laid and jointed with grey cement slurry mixed with pigment to match the colour / shade of the slab over and including 20mm thick screed bed / bedding layer in cement mortar (1:4) with roughening of surface, including rubbing and polishing complete all as specified and as directed. | 12 | Sqm | |
| 9 | 9 | Material and labour for 20-25 mm thick machine cut kota stone slab shall be laid on wall / column / vertical surfaces, laid and jointed with grey cement slurry mixed with pigment to match the colour / shade of the slab over and including 10mm thick plastering / backing coat in cement mortar (1:4) with roughening of surface, including rubbing and polishing complete all as specified and as directed. | 3 | Sqm | |
| 10 | 10 | Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) machine cut, laid on horizontal surface such as steps, jambs, window cills, cooking platforms and like etc shall be set and joinbted with neat cement slurry and pointed with white cement mixed with pigment and using marble dust with admixture of pigment in 1:2 to match with shade of granite and fixed over and including 20mm thick screed bed in CM (1:4) including cutting and polishing complete all as specified and as directed. | 8 | Sqm | |
| 11 | 11 | Material and labour for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base of floor finished the surface fair and even to receive next layer complete all as specified and as directed. | 20 | Sqm | |
| 12 | 12 | Material and labour for precast cement concrete chequered tiles of size 200 x 200 x 25 mm thick shall be laid on floor etc set, jointed and pointed in neat cement slurry laid over and including 20mm thick screed bed / bedding layer in CM (1:6) complete all as specified and as directed. | 20 | Sqm | |
| 13 | 13 | Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement complete all as specified and as directed. | 35 | Sqm | |
| 14 | 14 | Material and labour for forming construction joints 65 mm deep x 10 mm wide, filling with sealing compound grade A complete all as specified and directed. | 2.8 | 10 Rm | |
| 15 | 15 | Material and labour for anti termite treatment alongwith external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc in apron complete all as specified and directed. | 41 | Rm | |
| 16 | 16 | Material and labour for anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. | 105 | Sqm | |
| 17 | 17 | Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. | 60 | Sqm | |
| 18 | 18 | Supply and fixing 4 mm thick size 595 x 595 mm HPSC (High pressure Steam Cured) pre-primefered self embossed texture designer board E-board classic to be fixed with and including anodized aluminium grid / section of size 600 mm x 600 mm with main runner 38 x 24 x 0.90mm thick, cross tee 28.6 x 24 x 0.9 mm and wall angle 19 x 19 x 0.9 mm duly suspended with 2 mm dia GI wire hanger 1200 mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and directed. | 60 | Sqm | |
| 19 | 19 | Taking down wooden chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. | 12 | Each | |
| 20 | 20 | Taking down wooden chowkats or frames with shutters exc. 1.50 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. | 16 | Each | |
| 21 | 21 | Taking down wooden shutters of any description exc 1.00 Sqm but n.exc. 2 Sqm each complete all as specified and as directed. | 4 | Per leaf | |
| 22 | 22 | Supply and fix 105x60mm size pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc, including one shop coat of primer complete all as specified and as directed. | 50 | Rm | |
| 23 | 23 | Supply and fix 125x60mm size pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc, including one shop coat of primer complete all as specified and as directed. | 20 | Rm | |
| 24 | 24 | Matewrial and labour for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in filling of pressed steel door frame complete all as specified and directed. | 0.32 | Cum | |
| 25 | 25 | Supply and fixing for 35mm thick second class hardwood plain framed panelled shutters (any numbers of panels) with panels of timber flat both sides (feather edged) or of veneered particle board medium dencity, wood particle with commercial face veneers supplied and fitted to chowkats complete all as specified and as directed. | 24 | Sqm | |
| 26 | 26 | Material and labour for 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Sec-tion 8, clause 8.24 (a) complete all as specified and as directed. | 11 | Sqm | |
| 27 | 27 | Supply and fixing mild steel galvanized iron wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 and fixed with tinned tacks or staples complete all as specified and as directed. | 27 | Sqm | |
| 28 | 28 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. | 36 | Rm | |
| 29 | 29 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded decorative coloured laminates PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and decorative coloured laminates PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of decorative coloured laminates PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC laminated sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per specification complete all as specified and as directed. | 10 | Sqm | |
| 30 | 30 | Supply and fixing 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed. | 108 | Each | |
| 31 | 31 | Supply and fixing 75mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed. | 24 | Each | |
| 32 | 32 | Supply and fixing aluminium anodized, barrel tower bolts, 100mm long of extruded section complete all as specified and as directed. | 48 | Each | |
| 33 | 33 | Supply and fixing 150mm long extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed. | 56 | Each | |
| 34 | 34 | Supply and fixing 100mm long extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed. | 44 | Each | |
| 35 | 35 | Supply and fixing 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed. | 20 | Each | |
| 36 | 36 | Supply and fixing for 300mm long mild steel ordinary rat tail rod pattern springs for doors including roller and roller plate complete all as specified and as directed. | 8 | Each | |
| 37 | 37 | Supply and fixing framed work such as angle iron frame for fixing shutters with ends of bars shouldered and / or riveted and similar work confirming to Fe-410-O or Fe-310-O complete all as specified and directed. | 168 | Kg | |
| 38 | 38 | Material and labour for Cutting holes in brick walls exc. half brick but not exc. one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 complete all as specified and directed. | 72 | Each | |
| 39 | 39 | Supply and fixing continuous (piano) hinge, mild steel, bright finish or electro-galvanised, 30mm width of flaps (when open) complete all as specified and as directed. | 30 | Rm | |
| 40 | 40 | Supply and fixing 18/19 mm thick block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame work complete all as specified and as directed. | 29 | Sqm | |
| 41 | 41 | Material and labour for external teak wood lipping 6 mm thick, fixed with nail on particle board 18 / 19 mm thick complete all as specified and directed. | 45 | Rm | |
| 42 | 42 | Supply and fixing 75mm long extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed. | 16 | Each | |
| 43 | 43 | Supply and fix 40 mm dia cupboard knob, fixed with nuts, screws and washjers of brass, polished complete all as specified and directed. | 16 | Each | |
| 44 | 44 | Supply and fix steel windows with side hung shutters including box type hinges with steel handle, and steel\npeg stay, complete with glazing bars, dovetailed or welded with one shop coat of red oxide primer complete all as specified and directed. | 20 | Sqm | |
| 45 | 45 | Supply and fix steel windows with side hung shutters including box type hinges with steel handle, and steel\npeg stay, complete without glazing bars, dovetailed or welded with one shop coat of red oxide primer complete all as specified and directed. | 20 | Sqm | |
| 46 | 46 | Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing pin in square n.exe 0.50 Sqm in each pane complete all as specified and as directed.\n | 18 | Sqm | |
| 47 | 47 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed. | 32 | Sqm | |
| 48 | 48 | Supply and fix steel ventilators with centre hung shutters including two pairs of brass cup pivots, catch spring and pulley wheel with one shop coat of red oxide primer complete all as specified and directed. | 6 | Sqm | |
| 49 | 49 | Supply and fixing chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed. | 90 | Kg | |
| 50 | 50 | Supply and fixing 3 mm thick pin headed frosted glass, ordinary quality and glazing with oil putty and glazing pin in square n.exe 0.50 Sqm in each pane complete all as specified and as directed.\n | 5 | Sqm | |
| 51 | 51 | Material and labour for preparation of old painted wood and wood based surface of any description over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed. | 20 | Sqm | |
| 52 | 52 | Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. | 36 | Sqm | |
| 53 | 53 | Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. | 60 | Sqm | |
| 54 | 54 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed. | 1005 | Sqm | |
| 55 | 55 | Materials and labour for rendering 5mm thick plaster in cement mortar (1:3) on concrete surface as under ceiling finished the surface even and smooth without using extra cement complete all as specified and as directed. | 80 | Sqm | |
| 56 | 56 | Materials and labour for 15 mm thick rendering on other than fair faces of brick work or concrete surface in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. | 530 | Sqm | |
| 57 | 57 | Materials and labour for 15 mm thick rendering in two layer of 10 mm thick first layer and 5 mm thick second layer on fair faces of brick work mixed with water proofing compound as manufacturer instructions for finishing layer only in cement mortar (1:4) on wall and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.\nNote: WPC shall be measured and paid seperately. | 395 | Sqm | |
| 58 | 58 | Supply only integral water proofing compound (WPC) of best quality (ISI marked on packet) complete all as specified and as directed. | 39 | Kg | |
| 59 | 59 | Materials and labour for preparation of newly plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of primer over and including 2mm thick wall care putty complete all as specified and as directed. | 450 | Sqm | |
| 60 | 60 | Materials and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.\n | 395 | Sqm | |
| 61 | 61 | Materials and labour for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and as directed.\n | 80 | Sqm | |
| 62 | 62 | Materials and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and as directed. | 80 | Sqm | |
| 63 | 63 | Taking up or down steel tubing 15mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed. | 30 | RM | |
| 64 | 64 | Taking up or down steel tubing 20mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed. | 25 | RM | |
| 65 | 65 | Re-fixing 15mm bore dia galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.\n(Note: Serviceable materials as obtained from serial item No. 63.00 on shall be reused under this item) | 5 | RM | |
| 66 | 66 | Re-fixing 20mm bore dia galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.\n(Note: Serviceable materials as obtained from serial item No. 64.00 on shall be reused under this item) | 5 | RM | |
| 67 | 67 | Supply and fix 15mm bore dia galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.\n | 25 | RM | |
| 68 | 68 | Supply and fix 20mm bore dia galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.\n | 20 | RM | |
| 69 | 69 | Supply and fixing in repair 15 mm dia of pipe Angle valves, fancy type , chromium plated screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions complete all as specified and as directed.\n | 4 | Each | |
| 70 | 70 | Supply and fixing 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed. | 4 | Each | |
| 71 | 71 | Supply and fixing Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with and including ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, flushing pipe, antisyphonage pipe, etc. including making good the disturbed floor complete all as specified and as directed. | 4 | Each | |
| 72 | 72 | Supply and fixing in repair 15mm bore stop valve, fancy type cast copper alloy, chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends fixed to GI pipe complete all as specified and as directed. | 20 | Each | |
| 73 | 73 | Supply and fixing as in replacement 15mm bore dia bib taps cast copper alloy chromium plated, fancy type , long neck with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed. | 12 | Each | |
| 74 | 74 | Supply and fix as in replacement of 15mm bore Chromium Plated pillar tap fancy type cast copper alloy, with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including taking down old unserviceable one complete all as specified and as directed. | 4 | Each | |
| 75 | 75 | Supply and fix as in replacement concealed stop valve, chromium plated with long shank and cup, cast copper alloy with crutch or butterfly handle, screwed down both ends for high pressure as per ISI, suitable for 15 mm dia iron pipe including taking down old unserviceable one complete all as specified and directed. | 4 | Each | |
| 76 | 76 | Supply and fixing in repair PVC connection 15 mm dia and 450 mm long with two Nos of brass check nuts and washers complete all as specified and as directed. | 8 | Each | |
| 77 | 77 | Supply and fixing as in replacement 125mm dia chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipe complete all as specified and as directed. | 4 | Each | |
| 78 | 78 | Supply and fixing in repair vitreous china white soap dish, 160 mm x 160 mm x 90 mm size, fixed with and including screws and wooden / plastic cleats complete all as specified and as directed. | 4 | Each | |
| 79 | 79 | Supply and fixing brass chromium plated towel rail 600mm long fixed with and including Chromium plated brass screws complete all as specified and as directed.\n | 4 | Each | |
| 80 | 80 | Supply and fix looking mirror of size 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type PVC mounted, fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. | 4 | Each | |
| 81 | 81 | Supply and fixing in repair PVC shelves of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (Minimum weight 300 gms) complete all as specified and as directed. | 4 | Each | |
| 82 | 82 | Supply and fixing in replacement vitreoues china WHB, white, flat back, of size 550X400mm including brackets, cutting for and pinning in ends of brackets, waste fittings brass chromium plated for glazed ware basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. | 4 | Each | |
| 83 | 83 | Supply and fixing as in replacement stainless steel (conforming to AISI-304 grade) kitchen sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 310mmx 160mm depth or equivalent made of 1mm thick stainless steel sheet with 32mm bore CP waste coupling, 32mm bore PVC waste pipe(heavy duty) 90 cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete all as specified and as directed. | 4 | Each | |
| 84 | 84 | Supply and fixing as in replacement stainless steel (conforming to AISI-304 grade) plate rack of overall size 750mm x 600mm x 254mm or equivalent made of 1mm thick stainless steel sheet fixed on CP cantilever brackets, complete all as specified and as directed . | 4 | Each | |
| 85 | 85 | Supply and fixing for 300mm long mild steel ordinary rat tail rod pattern springs for doors including roller and roller plate complete all as specified and as directed. | 8 | Each | |
| 86 | 86 | Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed.\n | 2 | Cum | |
| 87 | 87 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed.\n | 40 | Rm | |
| 88 | 88 | Add or deduct for each 25 mm girth or part thereof over or under 30cm from item No. 87 above. (For adjustment only) | 5 | Rm | |
| 89 | 89 | Material and labour for 25 mm thick PCC 1:2:4 type B0 (using 12.50 mm graded stone aggregate) for providing roof slope complete all as specified and directed. | 15 | Sqm | |
| 90 | 90 | Demolition of cement concrete of any description and in any position complete all as specified and directed. | 1.2 | Cum | |
| 91 | 91 | Material and labour for water proofing treatment on RCC roof etc comprising with the following operation and as specified :- \n(a) Taking down / scrapping out existing old tarfelt bituminous compound including sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n.exc. 250 m. \n(b) Applying 15 mm thick plastering in cement mortar 1:4 mixed with WPC @ 3% by weight of cement finished even and smooth and curing for inimum 7 days.\n(c) Preparation and cleaning fully dried cement plastered surfaces.\n(d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per Sqm confirming IS-3384-1986. \n(e) A layer of APP based polymeric membrane 3 mm thick (minimum), weighing 3.50 Kg per Sqm reinforced with polyester non woven fabric (weighing not less 160 gms/Sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The overlap shall be minimum 100 mm on transverse direction and 75 mm on longitudinal direction.\n(f) One coat of aluminium paint over the APP based membrane @0.11 Kg/Sqm. | 49.9 | Sqm | |
| 92 | 92 | Material and labour for water proofing treatment to sunken floor comprising with the following operation as per following:-\n(a) Top of RCC slab in sunken portion including peripheral beams shall be plastered with 15 mm thick cement and sand mortar 1:3 using integral water proofing compound @ 3% by weight of cement and finish the surface fair and even and to be allowed to dry.\n(b) Two coats of epoxy resin / polymer modified cementanious coating like brush bond of frosrock or equivalent both on floor or wall / beam shall be applied as per manufacturer's instructions.\n(c) Slab to be given 1:20 slope outwards with 25 mm GI pipes spout with 300 mm projection beyond outer surface of wall.\n(d) Water tightness by flooding for 72 hours, the same shall be filled with lean concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) using cinder upto required depth (Lean concrete will be measured separately) . Surrounding to WC pan shall however be lime concrete as per specification. \n(e) All stages shall be passed.\ncomplete all as specified and as directed .\n(Note:- Plan area of sunken floor to be measured for payment purpose) | 12 | Sqm | |
| 93 | 93 | Supply only cement concrete type 1:4:8 type D2 (using 40 mm graded stone aggregate) for filling in sunken slab complete all as specified and as directed. | 1.2 | Cum | |
| 94 | 94 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.\n | 3 | Cum | |
| 95 | 95 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. | 3 | Cum | |
| 96 | 96 | Materials and labour for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. | 21 | Sqm | |
| 97 | 97 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed. | 110 | Sqm | |
| 98 | 98 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. | 100 | Sqm | |
| 99 | 99 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. | 10 | Sqm | |
| 100 | 100 | Taking down AC / Salt glazed ware pipes including fittings upto 110 mm dia size complete all as specified and directed. | 20 | Rm | |
| 101 | 101 | Supply and fixing in repair for 150 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in in floors complete all as specified and directed. | 20 | Rm | |
| 102 | 102 | Taking down old unserviceable PVC pipe, any size, any type complete all as specified and directed. | 25 | Rm | |
| 103 | 103 | Supply and fixing in repair for 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in in floors complete all as specified and directed. | 5 | Rm | |
| 104 | 104 | Supply and fixing in repair for 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall complete all as specified and directed. | 20 | Rm | |
| 105 | 105 | S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. | 2 | Each | |
| 106 | 106 | S & F 110 mm bore PVC (SWR) bends any radius with acess door complete all as specified and directed. | 2 | Each | |
| 107 | 107 | S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. | 2 | Each | |
| 108 | 108 | S & F 110 mm bore PVC (SWR) branch piece, single equal or unequal or \"T\" with acess door complete all as specified and directed. | 4 | Each | |
| 109 | 109 | S & F 75 mm bore PVC (SWR) floor trap, plain with gratings including jointing with solvent cement complete all as specified and directed. | 4 | Each | |
| 110 | 110 | S & F in repair for 110 mm bore dia pipe stack clamps made out of 50 mm x 5 mm FI and 16 mm dia round iron stays, including bolts & nuts and securing ends of stay to wall or roof complete all as specified and directed. | 14 | Each | |
| 111 | 111 | Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. | 38 | Kg | |
| 112 | 112 | M&L for precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate as in cover slab for manholes, drains etc, set in cement mortar 1:6 including necessary formwork complete all as specified and directed. | 0.15 | Cum | |
| 113 | 113 | Materials and labour for rendering 10mm thick plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement mixed with integral water proofing compound as per manufacturer's instruction complete all as specified and as directed.\n(Note: WPC shall be measured and paid in relevant item.) | 12 | Sqm | |
| 114 | 114 | Materials and labour for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) for inserting hold fast including necessary formwork complete all as specified and as directed.\n | 0.5 | Cum | |
| 115 | 115 | Dismantling water tank of capacity exc. 250 litre but n.exc. 500 litre and removing from site complete all as specified and as direcetd.\n | 3 | Each | |
| 116 | 116 | Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 500 litres with and including 20mm bore PTMT float and ball valve set including providing necessary connections after taking down existing PVC tank complete all as specified and as directed .\n | 3 | Each | |
| 117 | 117 | Demolition of cement concrete (reinforced) of any description and any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of rubbish from the site complete all as specified and as directed. | 1 | Cum | |
| 118 | 118 | M&L for RCC (nominal mix) 1:1.5:3 type A1 (Using 20 mm graded stone aggregate) as in slabs supported on wall / beams / columns in floors / roofs/ shelves and the like complete all as specified and as directed. (Note: Formwork and reinforcing bar shall be measured and paid separately in relevant items.) | 1 | Cum | |
| 119 | 119 | M & L for use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work, etc. not exceeding 200mm thick with rough finished surfaces of concrete flat complete all as specified and as directed.\n | 5 | Sqm | |
| 120 | 120 | Supply and fixing in repair Drapery rod of alluminium of 20 mm dia with fixing bracket, stops, rollers and rings etc complete all as specified and directed. | 15 | RM | |
| 121 | 121 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 tro ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc. 10 cm girth complete all as specified and directed. | 30 | RM | |
| 122 | 122 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, (including unscrewing from boards/out-let boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc.), removing materials off the site of work and making good disturbed surfaces of walls, floors, etc.all as directed. | 99 | Per Point | |
| 123 | 123 | Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for earth continuity wire connected to common earth dolly drawn through and including PVC casing caping of adequate size with all accessories and PVC rectangular boxes for mounting switch socket and fan regulator etc complete all as specified and as directed. \nNote: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.\n | 66 | Per Point | |
| 124 | 124 | .-Ditto- all as per item No 123.00 here-in-before but for 3 pin 6 amps switch socket outlet on the independant board with 1.5 Sqmm cable and -ditto-. | 12 | Per Point | |
| 125 | 125 | .-Ditto- all as per item No 123.00 here-in-before but for 3 pin 6 amps switch socket outlet on the same board with 1.5 Sqmm cable and -ditto-. | 12 | Per Point | |
| 126 | 126 | .-Ditto- all as per item No 123.00 here-in-before but for one light point controlled by two nos. Two way switch with 1.5 Sqmm cable and -ditto-. | 1 | Per Point | |
| 127 | 127 | .-Ditto- all as per item No 123.00 here-in-before but for one 3 pin 16 Amps switch socket combination on independent board with 2.5 sqmm PVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor and -ditto-. | 12 | Per Point | |
| 128 | 128 | Supply and fixing Piano switch flush button single pole one way 6 Amps complete all as specified and as directed.\n | 86 | Each | |
| 129 | 129 | Supply and fixing socket outlet 5 pin, 6 Amps, 230 volt flush type complete all as specified and as directed. \n | 24 | Each | |
| 130 | 130 | Supply and fixing bell push, 5 Amps piano type complete all as specified and as directed.\n | 4 | Each | |
| 131 | 131 | Supply and fixing Piano switch flush button single pole two way 6 Amps complete all as specified and as directed.\n | 2 | Each | |
| 132 | 132 | Supply and fixing switch socket combination 2 in 1, 6A/16A, flush type universal complete all as specified and as directed.\n | 12 | Each | |
| 133 | 133 | Supply and fixing fan regulator 100/120 watt step type AC 220 Volt complete all as specified and as directed.\n | 12 | Each | |
| 134 | 134 | Supply and fixing Bell, AC 230 volts, musical type complete all as specified and as directed.\n | 4 | Each | |
| 135 | 135 | Supply and fix ceiling rose surface Polycarbonate/ PVC three terminal complete all as specified and as directed.\n | 22 | Each | |
| 136 | 136 | Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC Casing Caping of adequate size with all accessories including taking down existing unserviciable sub main wiring complete all as specified and as directed.\n\nNote : Three runs of 4 Sqmm cable and one run of Casing Caping shall be measured as one unit for payment purpose. | 120 | RM | |
| 137 | 137 | Supply and fixing in replacement 20 watt LED, 4 feet long, wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and electronic driver etc with all accessories, internally prewired and fixing the same on and including two Nos. PVC blocks and connecting up with flexible copper cable of size 0.75 Sqmm 3 core from ceiling rose to the light fittings includiong taking down old unserviceable light fitting complete all as specified and directed. (Make: Cat No. LHFXCEP1TNNW020 for batten and LHLDDCXCML8Q020 (LED Tube) of Havells or equivalent model of Bajaj / Philips) | 20 | Each | |
| 138 | 138 | Supply and fixing as in replacement decorative wall mounted light fitting made up of polycarbonate including 1 X 9 Watt, 230V LED Lamp with B-22 base complete all as specified and as directed.\n | 12 | Each | |
| 139 | 139 | upply and fixing for lamp holder , PVC / Polycarbonate type with PVC round / square block with and including 9 watt LED lamp suitable for lamp holder fittings including taking down old unserviceable one complete all as specified and as directed.\n | 16 | Each | |
| 140 | 140 | Taking down existing unserviceable building security light fittings of any description with accessories and supply and fixing LED 1x20 W security light fittings drawn through and including GI brackets of of 40 mm dia light grade 1.40 metre long bend to shape with MS clamps made out of flat iron of size 40 X 4 mm , 02 Nos, including nuts, bolts, washers etc as required and connecting up with flexible copper cable of size 0.75 Sqmm, 3 core from ceiling rose to the light fittings complete all as specified and directed. (Cat No. SL20WLLED757SASYTOPCMP of Havells (ENDURAPEARL) or equivalent model of Bajaj / Philips) | 2 | Each | |
| 141 | 141 | Taking down ceiling fan carefully of any sweep from its original position, dismantling the complete fan, cleaning all dust particle, applying grease for bearing, applying spray painting of synthetic enamel paint of supirior quality including filling up cavities with filler, reassembling the fan and blades and hanging the fan in same position and testing on completion complete all as specified and directed. | 12 | Each | |
| 142 | 142 | Material and labour for rubber bush with clamp set comprising GI nuts, bolts, washers and split pin complete all as specified and directed. | 12 | Each | |
| 143 | 143 | Supply and fixing as in replacement of capacitor 2.5Mfd including making necessary electrical connection complete all as specified and as directed.\n | 12 | Each | |
| 144 | 144 | Supply and fixing as in replacement ball bearing/bush suitable for ceiling fan as per existing sample complete all as specified and as directed.\n | 12 | Each | |
| 145 | 145 | Material and labour for rewinding existing ceiling fan with suitable gauge of copper wire complete all as specified and directed. | 12 | Each | |
| 146 | 146 | Supply and fixing MCB DB SPN 8 ways double door, 230 Volts, including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall including taking down old unserviceable DB alongwith MCBs complete all as specified and as directed.\n | 4 | Each | |
| 147 | 147 | Supply and fixing MCB DB TPN 8 ways double door, powder coated 415 Volts, including bus bar neutral link, earth bar and din rail, for fixing MCBs of various rating capacity including taking down old unserviceable DB alongwith MCBs complete all as specified and as directed.\n | 1 | Each | |
| 148 | 148 | Supply and fixing MCB 63 Amps, TPN, 415 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed.\n | 1 | Each | |
| 149 | 149 | Supply and fixing MCB 6-32 Amps, SPN, 230 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed.\n | 9 | Each | |
| 150 | 150 | Supply and fixing MCB 6 - 32 Amps, SP, 230 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed.\n | 24 | Each | |
| 151 | 151 | Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 50 Sqmm 3.5 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc including taking down unservicable cable complete all as specified and as directed.\n\nNote : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item. | 69 | Rm | |
| 152 | 152 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for laying cable etc. or for foundation of pole etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out getting out in soft/loose soil complete all as specified and as directed. | 18.6 | Cum | |
| 153 | 153 | Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed . | 11.3 | Cum | |
| 154 | 154 | Removing exvated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed . | 7.3 | Cum | |
| 155 | 155 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down complete all as specified and as directed. (Note: Punned thickness shall be measured for payment purpose) | 5 | Cum | |
| 156 | 156 | Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed. | 540 | Each | |
| 157 | 157 | Supply and laying GI tubing 40mm bore light grade with fittings laid in trenches or for road crossing for protection of LT underground cables including taking up/down unserviceable pipe complete all as specified and as directed.\n | 11 | RM | |
| 158 | 158 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. (Note: Earthwire upto 7.50 m from earthplate shall be measured and paid in the quoted rate) | 1 | Each Set |
AI Tender Summary
Tender Timeline
Sep 16, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 09, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender