| 1 | 1 | Carry out 'B' check from authorised rep or service engineer from the manufacturer of DG set of 100 KVA,capacity Make : Cummins ( including the cost of the following spares all as per OEM instructions and directed by Engineer in Charge . \nNote : contractor should submit MOU of OEM (Kirloskar) with authorised service engineer.\n(a) S & F in repair lubrication oil filter \n(b) S & F in repair by pass filter \n(c ) Checking of hydraulic governer \n(d) ChEcking and toping up of coolant\n(e) S & F in repair fuel filter. \n(f) S & F in repair air cleaner element. \n(g) Cleaning radiator complete set\n(h) Engine Oil as per manufacturer specification and any other checking as per manufacturer instruction \n\n\n\n\n | | 1 | Each \nJob |
|---|
| 2 | 2 | All as per item No.1 (a) to (h) here in before but for 62.5 KVA DG set Make: Cummins complete all as specified \n | | 3 | Each \nJob |
|---|
| 3 | 3 | All as per item No.1 (a) to (h) here in before but for upto 28.5 DG set Make: Cummins complete all as specified \n | | 8 | Each \nJob |
|---|
| 4 | 4 | S&F Solenoied switch sutaible for upto 100 KVA DG Set complete All as specified & directed by engr-in-charge\n | | 1 | Each |
|---|
| 5 | 5 | S&F of Ring gear of Flywheel suitable for DG set up to 100 kva complete All as specified & directed by engr-in-charge | | 2 | Each |
|---|
| 6 | 6 | Supply and fixing in replacement of AVR S/F VARIABLE SPEED DCDG suitable for DG set with input voltage range 415 Volt AC with neutral & Out put DC voltage suitable for DG set upto 100 KVA complete all as specified and directed by Engineer -in-charge. | | 1 | Each |
|---|
| 7 | 7 | Disconnected and opening of self starter assemlly 12/24 volt for repair from DG set up to 100 KVA & repair unserveceable part of self starter suitable size as required on site complete all as specified and directed.\nNote :- Rate are deemed tobe include all worn out part including gear & winding complete all as specified | | 2 | Each |
|---|
| 8 | 8 | Supply only the following items of DG Set of various capacity :- | | | |
|---|
| 9 | 8.01 | Battery terminal, lug, bolts type suitable for heavy duty battery. | | 4 | set of 2 |
|---|
| 10 | 8.02 | Battery leads for copper conductor multiwired 70 Sqmm Single Core. | | 16 | RM |
|---|
| 11 | 8.03 | Hinges for DG set door of any size, any type as required on site. | | 8 | Each |
|---|
| 12 | 8.04 | Servo kool plus Radiator coolent | | 25 | Ltr |
|---|
| 13 | 8.05 | Low Viscosity synthetic Engin oil 15W -40 | | 60 | Ltr |
|---|
| 14 | 9 | Dismantling existing U/S battery charger & S/F of SMPS type battery charger suitable for 12 V DC with auto cut off from trickle to boost alongwith AC lead to charge the battery when DG Set is not in use complete all as specified & directed by Engineer Incharge. | | 2 | Each |
|---|
| 15 | 10 | S&F V belt for fan pulley (set of 2Nos) for DG set upto 100 KVA DG Set complete all as specified. | | 2 | set |
|---|
| 16 | 11 | S&F V belt for alternator and water pump assembly for DG set upto 100 KVA complete all as specified. | | 1 | Each |
|---|
| 17 | 12 | S&F Fuel hose pipe from fuel filter to fuel pump for DG set upto 100 KVA, complete all as specified. | | 2 | Each |
|---|
| 18 | 13 | S&F Fuel pipe from fuel tank to fuel filter for DG set upto 100 KVA, complete all as specified. | | 8 | set |
|---|
| 19 | 14 | Material & labour for carrying out complete overhauling / servicing of DG set panel / AMF panel / control panel, including checking and rewiring faulty electrical circuit using 1.5 sqmm FRLS copper conductor, for DG Set of any type / make / capacity, making all electric connections and testing for smooth operation, complete all as directed. | | 4 | Each |
|---|
| 20 | 15 | Supply and fixing of 'under/over voltage relay, 3 phase, 415 volts', for DG sets of capacity upto 100 KVA complete all as specified and directed by engineer-in-charge. | | 3 | Each |
|---|
| 21 | 16 | Supply and fixing of battery voltage relay 12 VDC complete all as specified and directed. | | 3 | Each |
|---|
| 22 | 17 | Supply and fixing of Fuse for DG sets of capacity up to 100 KVA complete all as specified and directed. Make: L&T/ABB/Havells | | 5 | Each |
|---|
| 23 | 18 | Supply and fixing in replecement of Lead acid maintenance free Battry 12 Volts 120AH of existing type & size suitable for DG Sets . Make : EXIDE/AMCO including initial charging. | | 6 | Each |
|---|
| 24 | 19 | Supply and fixing in replecement of 63 to 160 Amp, 415 Volts, 50 Hz Power contactor of coil voltage 240 Volts, complete all as specified and directed. Make: L&T/Schineider/Havells | | 5 | Each |
|---|
| 25 | 20 | Labour for attending of any breakdown of standby supply in any location ,whenever required round the clock ,rectify the fault and restore the standby supply within three hour after receipt of complaint of any nature i.e. Engine, alternator,control panel,AMF panel etc . \nNote -(i) The cost of replaced spare parts will be paid and measured seperatly. (ii) If complaint is not attended by contractor with in five hour the penality of Rs 500 / per hour to be imposed and amount of penality will be deducted from RAR. (iii) The cost of transportation (to and fro) for all kind of necessary equipment / T&P shall be arranged/brought by contractor to complete the job at site or at E/M yard and no extra cost shall be paid to the contractor to this effect. (iv) Complaint shall be lodged by telephonically ,so contractor to specify the telephone no who will receive the complaint round the clock. | | 12 | Each |
|---|
| 26 | 21 | Material & labour for opening / taking out of injector of DG set of any type/make and capacity 25 KVA to 100 KVA disconnection and opening of fuel injector assembly, carrying complete overhauling/servicing fuel injection system with including replacement of injector repair kit ,including calibration of injector, checking of pressure complete for each injector and re-assembling the same, fitted with DG set properly in original location, checking the allignment, making proper fuel connection, testing for smooth opreatio complete all as directed. | | 2 | Each job |
|---|
| 27 | 22 | S&F in replacement of unsv thermostat with new thermostat alongwith complete assy for DG set connection testing complete all as specified and directed. | | 1 | Each |
|---|
| 28 | 23 | Material & labour for complete overhauling,servicing of turbo charger, opening /taking out of turbo charger of DG set of 25 KVA to 100 KVA capacity ,disconnection of air supply connection pipe etc, including replacement of turbo charger repair kit, calibration/ testing of turbo charger system complete and re-assembling the same ,fitted with DG set properly in original position, checking the allignment, making proper all connection, testing for smooth opreation from authorised rep or service engineer from the manufacturer complete all as directed. | | 4 | Each job |
|---|
| 29 | 24 | M&L for capacity 25 to 100 KVA complete descaling of cooling system by radiwash with two times circulation of radiwash by means of running of engine & cleaning of fan blades, crankcase breather, radiator and its fins by means of high pressure air or water. | | 4 | Each job |
|---|
| 30 | 25 | Attending Complaints by deploying sufficeient labour for rectification of leakage of UG water pipe lines of size 200 mm Bore of any description such as CI/DI pipe line at any location including necessary excavation, earth work, dewatering, cutting existing pipe lines including repairs with suitable flanges, Joints or any other material complete all as specified and as directed. | | 7 | Each Job |
|---|
| 31 | 26 | As per item no 25 but for size150mm dia pipe line. | | 4 | Each Job |
|---|
| 32 | 27 | As per item no 25 but for size 100mm dia pipe line. | | 3 | Each Job |
|---|
| 33 | 28 | As per item no 25 but for size 50mm dia pipe line. | | 6 | Each Job |
|---|
| 34 | 29 | M&L for rectification of defective run lead joing by burning out lead joint in position including recovering lead and making new lead joint all as specified including bailing out water coming from defective joints by means of electric/diesel driven pump set, testing of the joint under full working pressure for the following CI Pipe lines all as directed by Engineer-in-charge. | | | |
|---|
| 35 | 29.01 | 200 mm dia | | 4 | Each |
|---|
| 36 | 29.02 | 150mm dia | | 4 | Each |
|---|
| 37 | 29.03 | 100 mm dia | | 4 | Each |
|---|
| 38 | 29.04 | 80 mm dia | | 4 | Each |
|---|
| 39 | 30 | M&L for rectification of defective rubber gasket flanged joints including replacing rubber gasket, bolts, nuts and washers for the following CI/MS pipe line. | | | |
|---|
| 40 | 30.01 | 100 mm dia | | 5 | Each |
|---|
| 41 | 30.02 | 80 mm dia | | 5 | Each |
|---|
| 42 | 30.03 | Note :-\n(i) Complaint shall be notified to contractor on mobile phone. Hence, it is mandatory to mention his mobile No. while quoting the tender.\n(ii) Complaint will be notified to contractor on mobile phone at any time between 0800 hrs to 2200 hrs and will be rectified within 12 hours after notification, failing which double of quoted rate per day per complaint will be recovered\n(iii) Completion report of the complaint shall be given in writing and recorded in the register.\niv) Rates quoted shall be deemed to include the cost of T&P required. Pipes and Jointing material shall be measured and paid under relevant items of schedule\n | | | |
|---|
| 43 | 31 | Attending leakage complaints of sluice valves by opening removing gland plate and pumping/taking water from water pit and proving gland packing and refitting by replacing worn out bolts,nuts and washers complete all as specified.\nNote: bolts,nuts and washers will be paid under relevant items of schedule | | 6 | Each Job |
|---|
| 44 | 32 | Demolition of existing valve pit chamber , M&L for masonry valve pit of size 900x900x900mm internal size complete with excavation, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally including 5mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer complete with locking arrangement complete all as specified and directed. | | 5 | Each JOB |
|---|
| 45 | 33 | S&F CI /DI Specials/fittings including breaking/taking out defective CI specials for spigot and socket end for CI mains upto 100 mm dia. | | 80 | Kg |
|---|
| 46 | 34 | Lifting and taking out the submersible pump set and motor of capacity Upto 12.5 HP including column pipe by dismantling nut bolt washers and rubber packing etc including disconnecting of submersible cable complete from the sump /bore well and lowering back the pump after repairing from the pump including making electrical connection with the existing panel /starter and connecting the complete the column pipe assembly with nut bolts, washers/ packing to the existing header without any leakage complete all as directed.\n Note :- Rate are deemed to be inclusive for jointing of Submersible Cable , reconnecting the delivery pipe line of submersible pump sets to water mains , testing for satisfactory running & continuous flow of water complete. | | 3 | Job |
|---|
| 47 | 35 | M&L for repairs & Servicing of defective submersible pump of capacity 12.5 HP by dismantling the pump & removing unserviceable parts , assemble the pump properly after replacements of unserviceable parts complete all as specified and as directed . Note:- (a) The rates are inclusive of transporting the pump from bore well site to repair work shop & back to site. (b) The rate are inclusive of turning / finishing work for fixing of parts properly. (c) The replacement of unserviceable parts will be measured and paid separately under respective item of this schedule. | | 3 | Job |
|---|
| 48 | 36 | M&L for rewinding of Submersible motor by taking out burnt copper winding, cleaning the casing & slots with wire brush & washing with pressure water & shall be dried , rewinding the motor using required gauge of super enameled copper winding wire. Making the winding leak proof & taking out the electric connection with suitable size of submersible cable up to 03 Meter, Capacity of motor 12.5 HP complete all as specified and as directed . | | 3 | Each |
|---|
| 49 | 37 | Supply and fix parts of submersible pump set of capacity 12.5 HP complete all as specified and as directed. | | | |
|---|
| 50 | 37.01 | Bearing bush Gun Metal | | 3 | Each |
|---|
| 51 | 37.02 | Bearing bush SS with rubber | | 3 | Each |
|---|
| 52 | 37.03 | Oil seal | | 3 | Each |
|---|
| 53 | 37.04 | Thrust plate/thrust bearing set | | 3 | Each |
|---|
| 54 | 37.05 | Sand Guard | | 3 | Each |
|---|
| 55 | 37.06 | CI Thrust Casing | | 3 | Each |
|---|
| 56 | 37.07 | CI stage casing | | 3 | Each |
|---|
| 57 | 37.08 | GM Bush | | 3 | Each |
|---|
| 58 | 37.09 | Mild steel key for impeller | | 3 | Each |
|---|
| 59 | 37.1 | SS Studs with nuts | | 3 | Each |
|---|
| 60 | 37.11 | CI Intermediate section | | 3 | Each |
|---|
| 61 | 37.12 | SS coupling bush common for pump & motor with key | | 3 | Each |
|---|
| 62 | 37.13 | High Tensile steel shaft | | 3 | Each |
|---|
| 63 | 38 | Supply and fixing in replacement of flat submersible 3 core 6 sqmm cable PVC insualted unsheathed multistranded copper conductor water proof suitable for submersible pump set complete all as specified and as directed. | | 100 | RM |
|---|
| 64 | 39 | Supply & fixing in replecement of coloumn pipe made out of GI pipe heavy grade 80 mm nominal bore each 3 meter length including flange duly welded with web complete all as specified and directed. | | 5 | Each |
|---|
| 65 | 40 | Taking the water sample for semi under ground sump and submitted the sample of water to the Govt lab for testing of water ,Chlorine test and all chemical componants test complete all as specified and as directed | | 6 | Each |
|---|
| 66 | 41 | M&L for rewinding of electric motor 15 HP 50 Hz 400/415 volts of mono block/centrifugal pump of any make and type with super enameled copper winding wire including bearing bushes and other accessories etc required to make motor functional and testing on load complete all as specified and as directed | | 1 | Each |
|---|
| 67 | 42 | M&L for rewinding of electric motor 3 HP 50 Hz 400/415 volts of mono block/centrifugal pump of any make and type with super enameled copper winding wire including bearing bushes and other accessories etc required to make motor functional and testing on load complete all as specified and as directed | | 2 | Each |
|---|
| 68 | 43 | M&L for rewinding of electric motor up to 1.5 HP 50 Hz 220 volts of mono block pump of any make and type with super enameled copper winding wire including bearing bushes and other accessories etc required to make motor functional and testing on load complete all as specified and as directed | | 3 | Each |
|---|
| 69 | 44 | Disconnecting old starters, Supply and fix in replacement of fully automatic star delta starter suitable for 10 -20 HP pump motor set, AC 440 V 50 Hz with single phase preventor , over current and short circuit protection Built in voltmeter, ammeter complete all as specified. MAKE: L&T / BCH /Siemens . | | 1 | Each |
|---|
| 70 | 45 | Supply and fix in replacement cast iron flanged drilled heavy duty sluice valve with ISI mark with stainless steel spindle and check nut and plan PN-1.6 complete with rubber insertion nuts and bolts with washers of size 100 mm bore etc complete all as directed by Engr-in-Charge. | | 3 | Each |
|---|
| 71 | 46 | Supply and fix in replacement cast iron flanged drilled heavy duty sluice valve with ISI mark with stainless steel spindle and check nut and plan PN-1.6 complete with rubber insertion nuts and bolts with washers of size 150 mm bore etc complete all as directed by Engr-in-Charge. | | 4 | Each |
|---|
| 72 | 47 | Supply and fix in replacement cast iron flanged drilled heavy duty sluice valve with ISI mark with stainless steel spindle and check nut and plan PN-1.6 complete with rubber insertion nuts and bolts with washers of size 50 mm bore etc complete all as directed by Engr-in-Charge. | | 3 | Each |
|---|
| 73 | 48 | Supply and fix Gun Metal globe or Gate valve iron wheel head screwed both ends for iron pipes of size 50mm dia bore complete all as specified and directed by Engr-in-Charge. | | 8 | Each |
|---|
| 74 | 49 | M& L for complete dewatering and cleaning of underground sump of capacity 1.5 lakh gallons with high pressure jet to remove all masses ,algae and dirt and removal of dirty water along with sludge using sludge machine and disposal of same to a safe distance and including scrubbing of internal surface using industrial vacuum machine and applying of anti-bacterial sterilization spray and apply one coat white wash to wall , floor and ceiling , internal surface of reservoir where applicable all as directed by engr-in-charge | | 2 | Each Job |
|---|
| 75 | 50 | M& L for complete dewatering and cleaning of overhead tank of capacity 1.5 Lakh gallons with high pressure jet to remove all masses ,algae and dirt and removal of dirty water along with sludge using sludge machine and disposal of same to a safe distance and including scrubbing of internal surface using industrial vacuum machine and applying of anti-bacterial sterilization spray and apply one coat white wash to wall , floor and ceiling , internal surface of reservoir where applicable all as directed by engr-in-charge | | 4 | Each Job |
|---|
| 76 | 51 | M& L for complete dewatering and cleaning of overhead tank of capacity 1.0 Lakh gallons with high pressure jet to remove all masses ,algae and dirt and removal of dirty water along with sludge using sludge machine and disposal of same to a safe distance and including scrubbing of internal surface using industrial vacuum machine and applying of anti-bacterial sterilization spray and apply one coat white wash to wall , floor and ceiling , internal surface of reservoir where applicable all as directed by engr-in-charge | | 4 | Each Job |
|---|
| 77 | 52 | Supply laying, testing GI tubing 20 mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and directed. | | 120 | RM |
|---|
| 78 | 53 | Supply laying, testing GI tubing 25 mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and directed. | | 120 | RM |
|---|
| 79 | 54 | Supply laying, testing GI tubing 80 mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and directed. | | 250 | RM |
|---|
| 80 | 55 | Supply laying, testing GI tubing 50 mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and directed. | | 110 | Each |
|---|
| 81 | 56 | Supply and fix Gun Metal globe or Gate valve iron wheel head screwed both ends for iron pipes of size 40mm dia bore complete all as specified and directed by Engr-in-Charge. | | 1 | Each |
|---|
| 82 | 57 | Supply and fix Gun Metal globe or Gate valve iron wheel head screwed both ends for iron pipes of size 25mm dia bore complete all as specified and directed by Engr-in-Charge. | | 5 | Each |
|---|
| 83 | 58 | Supply only calcium based white to off white free flowing solid granuals chemicals having chlorine content of minimum 60% for chlorination in 45 kg packing complete all as specified and directed.\nMake:-As approved by GE. | | 675 | Kg |
|---|
| 84 | 59 | M&L for prepration of surface of water pipe line above the ground level for Pinting with two coat of weather proof synthetic enamaled paint over one cote of primer complete all as specified & directed by engr-in-charge | | 3 | Each job |
|---|
| 85 | 60 | Supply and laying CI pipe line with spigot and socket ends and centrifugaly cast class A in any length laid in trenches of size:-\n | | | |
|---|
| 86 | 60.01 | 80mm bore | | 24 | RM |
|---|
| 87 | 60.02 | 100mm dia | | 24 | RM |
|---|
| 88 | 60.03 | 150mm dia | | 242 | RM |
|---|
| 89 | 60.04 | 200mm dia | | 18 | RM |
|---|
| 90 | 61 | Supply & fixing Electronic Water level indicator for Over head Tank & Under Ground sump including necessory fiber optic/ PVC copper conductor cable (under ground) from tank to Operator room complete all as specified and directed. | | 3 | Each |
|---|
| 91 | 62 | S&F in replacement of Dosing Pump as per sample for complete All as specified & directed by engr-in-charge | | 1 | Each |
|---|
| 92 | 63 | Supply & install in repair testing , commissioning of feeder pillar board Kiosk type ,LT(415 Volts, 50 Hz , 3-phase, 4 wire supply) floor mounted , factory assembled, outdoor type weather and vermin proof (Protection Class IP-54) made out of 40m x 40mm x 6mm angle iron frame and 3.15 mm thick MS Sheet CRCA sheet with front hinged opening, rubber lining, locking arrangement ,powder coated externally and internally after seven tanks treatment and lifting channel, fully compartmentalized design comple Bus Bar chamber comprising 4 Nos aluminium strip bus bars air insulated and PVC sheathed capacity 400 Amps with colour coding complete all as specified and as directed. | | 1 | Each |
|---|
| 93 | 64 | Supply and Fixing in replecement circular LED Flood with innovative finless designand excellent indirect light IP-66 grade of proterction with LED 160 Watt with resistance to impact and corrosion. Glare free and better uniformity.Milky version .complete all as specified and as directed . Cat Part No. LFLN-90 cdl make of CG or its equivalent in Wipro/Phillips\nNote : Any reducer to suit the manufacturer mounting dia for fixing of fitting to existing bracket shall be deemed to be included in the rates quoted by the Contractor. | | 4 | Each |
|---|
| 94 | 65 | Supply and Fixing in replecement circular LED Flood with innovative finless designand excellent indirect light IP-66 grade of proterction with LED 120 Watt with resistance to impact and corrosion. Glare free and better uniformity.Milky version .complete all as specified and as directed . Cat Part No. LFLN-90 cdl make of CG or its equivalent in Wipro/Phillips\nNote : Any reducer to suit the manufacturer mounting dia for fixing of fitting to existing bracket shall be deemed to be included in the rates quoted by the Contractor. | | 4 | Each |
|---|
| 95 | 66 | Supply and Fixing LED street light luminaire IP-66 grade of proterction with 24 High power LED of 45 watt rating and extendable upto 48 watt rating with unique peanut lens to ensure uniform distribution complete all as specified and as directed . Make: CG or its equivalent in Wipro/Havells/Surya | | 44 | Each |
|---|
| 96 | 67 | M&L for bracket for street light fitting made of 40mm bore light grade GI tube bent to shape required, Sutable for fixing on octagonal pole including fixed with bolts, nuts, washers duly painting the bracket with two coats of aluminium paint over a coat of zinc chrome primer complete including taking down the existing bracket and refixing and connecting up the light fitting etc all as directed. | | 10 | Each |
|---|
| 97 | 68 | Excavation in trenches not exceeding 1.5 m wide and and not exceeding 1.5 m depth in loose/soft soil and getting out soil all as specified and directed. | | 86 | Cum |
|---|
| 98 | 69 | Returning, filling in, with excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. | | 54 | Cum |
|---|
| 99 | 70 | Removal of surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete as specified and directed. | | 32 | Cum |
|---|
| 100 | 71 | Supply and filling river sand in trenches including spreading for cushioning of LT UG cable complete all as specified and as dirceted.\nNote : Punned down thickness shall be measured and paid . | | 29 | Cum |
|---|
| 101 | 72 | Supply and laying un-reinforced precast concrete LV cable cover class Type I with 250 x 150 x 40 mm, as specified and directed. | | 2400 | Each |
|---|
| 102 | 73 | Supply, laying and testing in replacement cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross sectional area 3.5 core x 50 Sq mm. complete all as specified and as directed.\nNote : Provision of suitable double crimpped lugs and glands deemed to be included in quoted rates. | | 80 | RM |
|---|
| 103 | 74 | Ditto all as item No 73 but 4 core 25 sqmm | | 80 | RM |
|---|
| 104 | 75 | Ditto all as item No 73 but 4 core 16 sqmm | | 120 | RM |
|---|
| 105 | 76 | M&L for wiring with two run single core PVC insulated, stranded, PVC sheathed copper cable conductor size 1.5 Sqmm x 3 core and drawing through pole including connected to street light & earth dolly complete all as specified and as directed. | | 455 | RM |
|---|
| 106 | 77 | M&L for cutting,clearing bushes/small plants and grass surrounding the E/M installations and removing the debris to a distance of 50m complete all as specified. | | 450 | Sqm |
|---|
| 107 | 78 | M&L for Marking & Numbering security & street light pole Along with securty wall & Road with Base in yellow colour & Number in black colour as directed By Engr - in - Charge | | 351 | Each |
|---|
| 108 | 79 | Supply and fix in replacement of automatic timer switch pole mounted enclosure consisting of ON/OFF switch based on LUX level power contactor 40 Amps, 4 pole, MCB 40 Amps, TP - 03 Nos, enclosure made of rust proof, shock proof, conforming to IP -54 complete all as directed. Make : Kakatiya/Healer/Bajaj.\nNote: (i) Inlet/outlet connecting cable PVC insulated aluminium stranded conductor 6 Sqmm, 4 single core for incoming & outgoing up to 8 Mtr deemed to be included in the unit rate. \n(ii) Provn of glands and lugs shall be deemed to be included in the quoted rate. | | 1 | Each |
|---|
| 109 | 80 | M&L for maintenance of aluminum tower ladder including following \n | | | |
|---|
| 110 | 80.01 | S&F in Replacement of aluminum ladder steps of any type (circular or Flat) and any size complete all as specified | | 74 | Each |
|---|
| 111 | 80.02 | S&F in repair heavy duty aluminum rail (32' Long) of aluminium tower ladder including necessory lock complete all as specified & Directed | | 6 | Each |
|---|
| 112 | 80.03 | M&L for repair heavy duty MS angle frame of Tiltable Aluminium tower ladder having cross support including necessory welding and replacement of any angle support nut, bolt,washer of any size & preparation of old steel surface by brushing /cleaning strain grease /oily spots with thinner and two coats (black colour) of spray painting with spray machine complete all as specified | | 3 | Each Job |
|---|
| 113 | 80.04 | S&F in replacement of worn out Galvanized steel wire rope of 25 sqmm 6 core multi stranded (Roll of 40 Mtr), including all necessory clamps , nuts & bolts complete all as specified | | 3 | Roll |
|---|
| 114 | 80.05 | S&F in replacement hand operated winch of aluminium tower ladder including handel, Gear, Bearing & neccesory welding, nuts, bolts & washers for fixing in palce complete all as specified | | 6 | Each Job |
|---|
| 115 | 80.06 | S&F in replacement wheel of Tiltable Aaluminium tower ladder Base (Exisiting size) Including its bearing & mounting on existing axle complete all as specified & Directed | | 12 | Each |
|---|
| 116 | 81 | M&L for Comprehensive maintenance and repair including replacement of defective parts & load testing of electric operated crane 2 Ton capacity including cleaning of all parts, greasing & oiling for all moving part including Runway rail, wire rope, Bridge drive wheel & Hook block complete all as specified & directed complete all as specified & directed\nNote :- Required load for load testing shall be arrenge by contractor No extra payment shall be given to the contractor on this account. | | 2 | Each |
|---|
| 117 | 82 | M&L for repair & Rewinding three phase electric motor of hoist (existing size & model) including replacement of all defective parts &bearing of motor complete all as specified & directed | | 2 | Each |
|---|
| 118 | 83 | M&L for Comprehensive maintenance and repair including replacement of defective parts & load testing of Hand operated crane 01 Ton capacity including cleaning of all parts, greasing & oiling for all moving part including Runway rail, wire rope ,& Hook block complete all as specified & directed complete all as specified & directed\nNote :- Required load for load testing shall be arrenge by contractor No extra payment shall be given to the contractor on this account. | | 2 | Each |
|---|
| 119 | 84 | Supply and fixing in replecement of 415 Volts, 50 Hz Power contactor up to 63 amp, of coil voltage 240 Volts, installed at EOT crean panel complete all as specified and directed. Make: L&T/Schineider/Havells | | 2 | Each |
|---|
| 120 | 85 | Supply and fixing weather proof street light junction box of size 300 x 200 x 105mm including MCB SP 6 Amps and connecting terminals 4 way and fixing with street light poles using necessary MS clamps, nuts, bolts washers, lugs for incoming and out going cables, gland for cable etc of suitable size complete all as specified and as directed. Make : Hensel/Sintex/Universal Switch Gear control \nNote : The rates quoted are inclusive of provision and fixing of suitable lugs and glands for cable connection. | | 9 | Each |
|---|
