| 1 | 1 | Supply and Erection of Submersible Pump Set | Item No.1 | | |
|---|
| 2 | 1.01 | Supplying brand new open well type submersible pump set of RPM 2880, 330/415V,50Hz ISI marked having stainless steel body GM impleller suit the following duty condition, with two year warrenty suitable with ISI mark. Including supply of 50 mm GI pipe 10m, suitable ISI marked cable 10m.\nDischarge - 3 lps, Total head - 25m, Efficiency - 70% minimum | Item No.2 | 1 | No. |
|---|
| 3 | 1.02 | Supplying suitable DOL starter for the above motor | Item No.3 | 1 | No. |
|---|
| 4 | 1.03 | Supplying HRC Type Common main switch with HRC fuse unit | Item No.4 | 1 | No. |
|---|
| 5 | 1.04 | Supplying 100mm size flush mounting type volt meter suitable for the above motor | Item No.5 | 1 | No. |
|---|
| 6 | 1.05 | Supplying 100mm size flush mounting type ammeter suitable for the above motor | Item No.6 | 1 | No. |
|---|
| 7 | 1.06 | Supplying suitable power factor improvements capacitor of required capacity for the above motor | Item No.7 | 1 | No. |
|---|
| 8 | 1.07 | Supplying wall mounting type MS control panel board of suitable size for mounting the required electrical fixtures in the pumping station as per ISI Rules (Common) | Item No.8 | 1 | No. |
|---|
| 9 | 1.08 | Supply suitable type single phasing preventor | Item No.9 | 1 | No. |
|---|
| 10 | 1.09 | Supplying 100mm size pressure gauge of required range with cock valve etc,. Complete | Item No.10 | 1 | No. |
|---|
| 11 | 1.1 | Supplying suitable size CI/DF valve with ISI mark | Item No.11 | 1 | No. |
|---|
| 12 | 1.11 | Supplying suitable size CI/DF Riflex valve with ISI mark | Item No.12 | 1 | No. |
|---|
| 13 | 1.12 | Supplying cable with ISI mark (2.5 mm sq.size) | Item No.13 | 6 | M |
|---|
| 14 | 1.13 | Supply and fixing good quality column IPVC pipes 60mm dia with socket 3m length fixed on the bore well including all cost of pipes and conveyance etc. complete | Item No.14 | 4 | Nos |
|---|
| 15 | 1.14 | Three phase wiring from supply point to incoming circuit breaker and switch board to starter to motor etc. with armed PVC copper cable in required number of runs as per IE rules with required current carrying capacity including fixing the starter switches, Voltmeter etc. on switch board under conducting trial run for one week | Item No.15 | 1 | set |
|---|
| 16 | 1.15 | Providing Earthing for the complete installation as per IE including supply of materials required for earthing. | Item No.16 | 1 | set |
|---|
| 17 | 1.16 | Erection of pumpsets, motors, valves and all other accessories including testing, commissioning and conducting trial running of the pumpset for 7 days as per the direction of departmental officers including maintenance of the pumpset for the first 2 years | Item No.17 | 1 | set |
|---|
| 18 | 1.17 | Nylon rope-15 mm | Item No.18 | 25 | m |
|---|
| 19 | 1.18 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 100mm. | Item No.19 | 1 | No |
|---|
| 20 | 1.19 | Supply of 100 mm GI pipe | Item No.20 | 15 | m |
|---|
| 21 | 1.2 | Supply of 110 mm PVC pipe 10kg/cm2 | Item No.21 | 310 | m |
|---|
