Provn Of Certain Revenue And Minor Work At Af Stn Bihta Under Ge ( Af ) Bihta
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Sep 2020
0 days left
EMD
24600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bihta → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of Certain Revenue And Minor Work At Af Stn Bihta Under Ge ( Af ) Bihta
BOQ
| Name of Work : Provn of certain Revenue and Minor Work at AF Stn Bihta under GE (AF) Bihta | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | S&F rolled mild steel Framed work as in doors or gates of angle or other section with gusset platees ,rails, braces, etc , complete ,drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running rails and guides) and hanging, also fastening an fixing confirming to Fe-290 (Fde Fe-290 (Gde E165) complete all as specified and directed . | 972 | Kg | |
| 2 | 2 | S&F Mild steel framed work as in grills, grating, etc which ends of bars shouldered and /or riveted or forged in to spikes, framed guard bars barred iron doors ladders framed balusters walk ways railings framework of water tanks and similar work conforming to steel Fe-290 (Gde E-165 ) Complete all as specified and directed | 540 | Kg | |
| 3 | 3 | M & L for applying two coats of synthetic enamel paint over a coat of red oxide priner including preparation on new steel surfaces of any description not other wise described over 10cm width or girth complete all as specified and directed. | 77 | Sqm | |
| 4 | 4 | M&L cutting holes exc one brick but not exc two bricks walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 Complete all as specified and directed. | 35 | Each | |
| 5 | 5 | M & L for rendering 15 mm thick over brick or concrete wall surfaces, in cement mortar 1:6finished even and smooth without using extra cement Complete all as specified and as directred. | 25.5 | Sqm | |
| 6 | 6 | M/L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant priming paint complete all as specified and directed . | 25.5 | sqm | |
| 7 | 7 | M&L for holes drilling holes on iron and steel work exc 3mm but n exc 12mm depth upto 12mm dia (and countersunk, if required) complete all as specified and directed. | 94 | per 10 Nos | |
| 8 | 8 | S&F stainless steel wire netting having size of mesh 12mm and draf wise 1.4mm fixed with tinned tacks of stainless steel wire staples complete all as specified and directed. | 116 | Sqm | |
| 9 | 9 | M&L welding in repairs n exc 2.5 cm in length and thickness of metal to be welded not exc 6mm complete all as specified and directed. | 940 | Each | |
| 10 | 10 | S&F 4mm dia plain mild steel galvanised steel wire 150x100mm mesh made up in to mattresses or cages, lapped, wired and laid in position including closing after filling icluding necessary welding and fixing etc complete all is specified and directed. | 64 | Sqm | |
| 11 | 11 | CAUTIONARY SIGN BOARD : Providing & Erecting Retro Reflective Cautionary sign Boards of size 600mm equilateral triangle made out of retro reflective sheeting of Micro prismatic grade fixed over 3mm thick aluminimum composite panel supported with back support frame of 25 x25 x3mm mild steel angle as approved and supported ona 3.1 m long mild steel angle iron post 75mm x75mm x 6mm coated with one coat of epoxy primer and two coat of best quality epoxy paint in black and white bands. The details of symbol for each board shall be as per the instruction of Engineer-in-Charge.The fixing at site shall be in 1:2:4 PCC block of size 45x45x60cms for each leg including excavation curing etc complete under the surpervision of engineer-in-charge. The board shall come with an warranty of 10 years on the reflectivity parameters in accordance with IRC from the original sheet manufacturer along with the material safety data sheet. | 8 | Each | |
| 12 | 12 | INFORMATORY SIGNS BOARD : Providing & Erecting Sign boards of size 800 x 600 mm rectangular boards made out of Retro reflective sheeting of Micro prismatic grade conforming to IRC- 67:2010/ASTMD 4956 type XI standards fixed over 3mm thick aluminimum composite panel supported with back support frame of 25 x25 x3mm mild steel angle as approved and supported ona 3.1 m long mild steel angle iron post 75mm x75mm x 6mm coated with one coat of epoxy primer and two coat of best quality epoxy paint in black and white bands. The details of symbol for each board shall be as per the instruction of Engineer-in-Charge.The fixing at site shall be in 1:2:4 PCC block of size 45x45x60cms for each leg including excavation curing etc complete under the surpervision of engineer-in-charge. The board shall come with an warranty of 10 years on the reflectivity parameters in accordance with IRC from the original sheet manufacturer along with the material safety data sheet. Make/Manufactures:- Greenlite/ABS/3-M/Advance technology | 5 | Each | |
| 13 | 13 | PROHIBITORY SIGN BOARD : Providing & Erecting Sign boards of size 600mm circular boards made out of Retro reflective sheeting of Micro prismatic grade conforming to IRC 67: 2010/ASTM D 4956 TYPE XI standards, Fixed over 3mm thick aluminimum composite panel supported with back support frame of 25 x25 x3mm mild steel angle as approved and supported ona 3.1 m long mild steel angle iron post 75mm x75mm x 6mm coated with one coat of epoxy primer and two coat of best quality epoxy paint in black and white bands. The details of symbol for each board shall be as per the instruction of Engineer-in-Charge.The fixing at site shall be in 1:2:4 PCC block of size 45x45x60cms for each leg including excavation curing etc complete under the surpervision of engineer-in-charge. The board shall come with an warranty of 10 years on the reflectivity parameters in accordance with IRC from the original sheet manufacturer along with the material safety data sheet.Make/Manufactures:- Greenlite/ABS/3-M/Advance technology | 4 | Each | |
| 14 | 14 | SPEED BUMP : Providing & Erecting of PVC made of Material : ABS, Colours : Yellow and White, Size per piece : 250 x 350 x 50mm tapering to top Fixing arrangement : Anchor bolts + Epoxy mortar grout and complete as directed by the Engineer-in-Charge. Make/Manufactures:- Greenlite/ABS/3-M/Advance technology | 54 | Each | |
| 15 | 15 | M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortor 1:6. complete all as secified and directed. | 20.1 | Cum | |
| 16 | 16 | M&L for rendering 15mm thick on fair faces of brick work or concrete work built in cement mortor 1:4 finished even and smooth without using extra cement Complete all as specified and directed. | 18 | Sqm | |
| 17 | 17 | M&L for preparation of newely plastered surfaces on wall and apply two coats of oil emulsion over a coat of alkali resistent priming coat complete all specified and directred | 18 | Sqm | |
| 18 | 18 | Excavation in trenches, n, exc. 1.5m wide and n, exc 1.5m in depth,; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sqm on plan and n exc 1.5 m in depth and getting out asin soft / loose soil complete all as specifeid and directed. | 16 | Cum | |
| 19 | 19 | M&L for cement concrete type C2 (1:3:6) using 40mm graded stone aggregate as in foudations filling and mass concrete complete all as specified and directed. | 10.5 | Cum | |
| 20 | 20 | M&L for rendering 10mm thick on fair faces of brick work or concrete surface in cement mortor 1:6 finished even and smooth without using extra cement complete all as specified and directed. | 25 | Sqm | |
| 21 | 21 | M&L for preparation of newely plastered surface of wall and applying three coats of white wash. | 25 | Sqm | |
| 22 | 22 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft / loose soil complete all as specified and directed. | 1.8 | Cum | |
| 23 | 23 | Removing excavated material n exc 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed. | 2.5 | Cum | |
| 24 | 24 | S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position. | 1 | Each | |
| 25 | 25 | S&F 15mm dia steel tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | 72 | RM | |
| 26 | 26 | S&F 20mm dia steel tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | 32 | RM | |
| 27 | 27 | S&F in repair 15 mm dia float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm - 142 gms | 1 | Each | |
| 28 | 28 | S&F dia bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe union 15mm dia bore complete all as specified and directed. | 1 | Each | |
| 29 | 29 | S&F in bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 26 mm dia bore complete all as specified and directed | 2 | Each | |
| 30 | 30 | S&F PVC (SWR) pipe of 110 mm bore single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed. | 27.8 | RM | |
| 31 | 31 | S&F vitreous china wash basin, white, flat back, size 550 x 450mm including brackets and waste fitting brass chromium plated 32 mm dia ,waste coupling PTMT half or full threaded for minum wt 45 gms all as specified and directed for 32 mm bore dia of discharge pipe complete. | 1 | Each | |
| 32 | 32 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm long Complete all as specified and directed | 1 | Each | |
| 33 | 33 | S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high preassure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for 15mm bore dia of pipe complete all as specified and directed. | 1 | Each | |
| 34 | 34 | S&F stop valves, cast copper alloy fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm dia of pipe complete all as specified and directed. | 1 | Each | |
| 35 | 35 | Material & labour for Chemical earthing complete with copper plate electrode 900mm x 600mm x5mm burried directly in ground vetically to a depth not less than 4.70 mtr below normal ground level (with top edge of earth plate not less than 3.60 mtrs below ground level ) connected to copper strip 32 mm x 6 mm as main earthing lead by means of tinned copper/ brass bolts nuts checknuts, and washers besides brazing ( copper strip shall be 0.5 M overlaped with copper plate by brazing) at all joints all as directed and connected to earth test point all as specified and testing on completion with and including necessary excavation and earth work in any type of soil earth,GI pipe medium grade 50 mm bore for protection of copper strip from earth electrode to and including the earth test point of galvanised Iron/steel , adequate quality of charcoal dust, common salt and magnesium sulphate in alternate layers of 100 mm thick x 6 layers all around the plate , and RCC cover of size 54x54x50 mm (1:2:4) type B1 using 20 mm graded crushed stone aggregate reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as shown in drawing Note - 1. Cost of copper strip and GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items. 2. On testing,after completion of job ,if desired earth resistence is not found i.e. below 1.00 Ohms ,the earthing shall be redone on no extra cost to govt. | 1 | Each | |
| 36 | 36 | Supplying and fixing earth continuity conductor or main earthing lead 32 mm x 6 mm copper strip/earth lead laid in pipe/fixed on walls or any other position including jointing by tinned copper/ brass nuts bolts and washers in addition to brazing at every joint complete all as specified & directed. | 5 | RM | |
| 37 | 37 | M & L for cutting existing steel tubing for alteration or addition Each cat measured) for 40 or 50mm bore pipe complete all as specified and dierected. | 1 | Each | |
| 38 | 38 | Supply & Laying Galvanising tubing medium grade with all fitting laid in trenches 50 mm bore dia of pipe complete all as specified and directed. | 4 | RM | |
| 39 | 39 | M&L for point wiring using approved colour coding (Phase-red, Neutral Black Earh green) Complete with FRLS Insulated and unshealthed stranded copper conductor cable 2.5 sqmm single core conforming to IS 694 including meadium duly concealed unplasticised PVC conduit confirming to IS 9537 (Part-3) and ISI marked not less than 20 mm dia concealed in wall receed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamle paint over one coat of red oxide primer with top cover 3mm thick bakelite laminated sheet with brass screws and cup washer with all assessories including FRLS insulated and unshealthed stranded copper conductor cable 2.5 sqmm single core in green colour as earth wire connected to earth duly complete all as specified and directed.(a) for light/Fan/Exhaust//Call bell. Point controlled by one way 15 Amp switch. | 2 | Per Point | |
| 40 | 40 | S & F PVC insulated aluminium conducter 2.5 Sqmm 2 core cable with 1.5 Sqmm dia each wire for service connection for Flame proof light complete all as specified and directed Make-HAVELLS / KALINGA /POLYCAB | 140 | RM | |
| 41 | 41 | M&L for pipe galvenised LIGHT GRADE 15mm dia bore pipefor Flame proof light cable protection from DB box to Flame proof light including fitting complete all as specified MAKE -TATA /JINDAL/SWASTIK NOTE: Clampsfor pipe support of flat iron of size 25x4 mm will be measure and Paid seperately | 35 | RM | |
| 42 | 42 | M&L cross support, clamp nut, bolt etc complete including fitting and back plates fabricated fromstuctural steel section including nuts, bolts, wasers welding bending cold or hot drilling holes for boltsin any shape or size as indicated or directed and including of one primer coat one under coat and one finishing coat of paint complete all as specified and directed | 0.3 | Qtl | |
| 43 | 43 | S&F FIAMMA II CIMFR Certified LED flame proofBatten suitable for single and twin T8 tube 16/20 W Recommended for gas /vapour group of IIA&IIB and Zone 1,2 of capacity 20 IP 65 protection watt suitable for operation on 240 volts single phase 50 HZ die cast alluminium housing with heat resistant and toughened glass cover mounting bracket mounting on wall and connection with suitable size 3 core PVC cable from light fitting to switch gear complete all as specified and directed Make - CAT NO-EXTN2LT8-16/20 of CG or quivalent make and modle of HAVELLS /PHILIPS. Note:-clamps for flood light support of flat iron size 25x4 will be measured and paid seperately | 2 | Each | |
| 44 | 44 | S&F LED Polycarbonate T8 Tube with insuilt driver with metal heat sink and all as specified and directed by Engineer in charge Make CG Cat Part No LT8-20-865(2) or equivalent make and model in Havells/ Philips. | 4 | Each | |
| 45 | 45 | S & F Flame proof switch rotary type with termination box in LM 6/ 16 A Single pole 250 Volt all as specified and directed Make- C&G/Bajaj/Sudhir/ Baliga | 2 | Each | |
| 46 | 46 | M&L for concealed point wiring complete with multi stranded FRLScopper conductor 1.5 Sqmm size PVC insulated sheathed cable 1100 Volt grade drawn in and including medium grade unplasticised PVC concealed conduit not less than 20 mm dia with terminal boxes of rquired size of not less than 1.2 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core stranded FRLS copper conductor 1.5 Sqmm Size PVC insulated unsheathed cable wire to common earth and connected to earth dolly drawn in same conduit complete all as specified For one lilght/Fan/Exhaust fan. | 8 | per point | |
| 47 | 47 | S&F Switch piano flush button single pole one way 6 Amp, 240 Volts complete all as speciied and directed. | 8 | Each | |
| 48 | 48 | S&F Socket outlet 5 pin, 6Amp flush type complete all as specified and directed | 8 | Each | |
| 49 | 49 | S&F ceiling rose Three terminal PVC Poly carbonate isolated body complete all as specified and directed. | 8 | Each | |
| 50 | 50 | S & F Metal Exhaust fan Heavy duty AC single phase 230 volt of 380 mm sweep, 1400 RPM, 50HZ with lovoure and shutter connecting up including provision of cable from ceiling rose. Modle : Turbo force TP complete all as specified and directed Make- Havells/ Khaitan/Crompton Greaves/Usha | 5 | Each | |
| 51 | 51 | S & F Metal Exhaust fan Heavy duty AC single phase 230 volt of size 450 mm sweep, 1400 RPM with lovoure and shutter connecting up including provision of cable from ceiling rose. Modle : Turbo force TP complete all as specified and directed . Make- Havells/ Khaitan/Crompton Greaves/Usha | 3 | Each | |
| 52 | 52 | M&L for making hole suitable for fixing of Exhaust Fan of size 300 mm sweep in round shape at wall at any height including inserting bolts in wall and making good disturbed surface to match the existing surace complete all as specified and directed | 8 | Each | |
| 53 | 53 | Controllers Desk:- (a) All as shown on drg (attached). Overall size shall be 168\"(L)x 39\"(D) x 45\" (H).(b) Controllers desk shall be fabricated out of prelaminated MDF board exterior grade confirming to grade-I & Type -IIIas per IS 14587 both side in teak finiosh in baverian Beach Shade 18mm thick for top side ,shutter pertition 12mm thick for sliding shelves sides and back of drawer and 6mm thick for bASE OF DRAWER AS REQUIRED AS PER APPROVED DRAWING WITH PROVISION OF FIXING afnet-pc,cadf 172,rwy sTATUS LIGHT a/b aws,lup 1&2 ch3,5.6,&7SP,CRASH BELL with proper Wiring as per arrangement with slant of 18\"at 45degree with total depth of 18\" as shown in side view of approved drawing.(c) front size of controller desk shall have three cabinets with arrangement to seat three persons. Two sliding shelves for key board on telescopic channels superior quality of required length of make EBCO/HETTICH/GODREJ for smooth movement shall be provided. (d) Drawer : three no of drawers shall be provided as shown on approved drawing and as detailled at para (b) above.A suitable stainless steel handle 75mm long supwrior quality as per approved shall be provided to pull mout drawer.A sutaible stainless steel telescopic channel of superior quality of required length of make :EBCO/HETTICH/GODREJ shall be provided to under side of the drawer in lieu of wooden runner for smooth movement . A sutaible lock with duplicate keys shall also be provided to drawer make : godrej/Link/harrison or as approved and as directed .(e) back of controllers desk shall be covered with proper cover make of pre -laminated cMDF Board 09mm thick as detailed at para 6 (b) above with slidiong type collapsible system with tower with aluminium as required and as directed for proper servicing and maintenance of fitted equipments ,shelves as required with holes for wire shallbe provided made of pre-laminated MDF Board as charge through put the length of controllers desk at the back side of the controllers desk .(f) All cutting and edging shall be done with proper machine to give a neat finish.(g) Edges of board shall be covered with teak wood edging and open edge with PVC edbing as approved of same matching colour and shade rest. Rest edge/ends shall be provided with teak wood edges.(g) All the connected cable laying open in the back of the controller desk shall be properly covered with pre-laminated vMDF Board 18mm thick as directed above at para (b) all as directed by Engr-in -Charge.(j) Rest all as shown on approved drawing sketch 'B' & sketch 'C' and sample photo and as directed by Engr-in-charge..(K) Rest all as per drawing supply and fixing. \nThe following drawings are enclosed herewith :-\nSketch “A’- Sample \nSketch “B’- Front View\nSketch “C’- Side View\nSketch “D’- Ops Clerk Works Station Top View\nSketch “E’-Ops Clerk Work Station 1A\nSketch “F’- Ops Clerk Work Station 1B\n | 1 | Each Job | |
| 54 | 54 | M&L Excavating for post holes (or similar holes) each n exc 0.5 cu.m, getting out, returining, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft / loose soil complete all as specified and directed. | 16 | Each | |
| 55 | 55 | M&L for PCC type D2 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundations, fillings and mass concrete complete all as specified and directed | 0.45 | Cum | |
| 56 | 56 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 290 gde-E-165 | 360 | Kgs | |
| 57 | 57 | M&L Pre - Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thickness of any colour having tensile strength of 550 MPA as in roof covering fixed with 'L' type or \"J\" type or cranked hook bolts all as specified and directed by Engr-in-charge | 41 | Sqm | |
| 58 | 58 | Supply and fix constant voltage transformer (CVT) complete set consisting of step down transformer iron core with copper winding, DC circuits, indicator lamp, on off switch, Rotary switch to rgulate the DC voltage from 230 volt to variable voltage of 6, 9, 12 Volt DC output including making necessary electrical connections with existing system where directed complete all as specified and as directed. | 2 | Each | |
| 59 | 59 | Supplying, installing, testing & commissioning out door type cubical panel board outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet and MS angle section 40x40x6 mm mounted on PCC 1:2:4 type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front openable single door system and cable alloy (Each door hinged with body at 2 places with body and hinges should be welded with body and door) lockable/open able by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof, factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising of MCCB TPN 32/40 Amps 220V AC -1 No Make:Legrand/Schneider/Siemens and 1 x 15 Amps Switch Socket combination, Indicator Lamp RYB 22.5mm dia LED type 240 volts AC -01 set of three. The panel shall have blank compartment for placing/fixing of CVT inside the panel to protect from ingress.Note(i) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming to IS-694.(iii) Panel drawing shall be got approved before placing of order from Engr-in-Charge/GE.(iv) The Panel shall be surrounded with 23cm brick wall upto 0.5 mtr height all around the panel and blank portion between panel and wall shall be filled with PCC 1:2:4 incl masonary work leaving ducts for cables complete all as directed. | 2 | Each | |
| 60 | 60 | M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised iron strip 32x6 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 40 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised Iron/steel . supplying and laying charcoal stone aggregate) chamber and RCC cover of size 54x54x50 mm (1:2:4) type B1 using 20 mm graded crushed stone aggregate reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, PGI funnel with wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in drawing Note - Cost of GI stripand GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items. | 2 | Each | |
| 61 | 61 | Supply, installation, testing and commitioning of Wall mounted fan of size 400 mm sweep modle swanky , outer pack size 2x1 suitable for operation on 230 Volt, 50 HZ AC supply complete \nMake - HAVELLS or equivalent make & model of USHA/BAJAJ. \n | 13 | Each | |
| 62 | 62 | Excavation in tenches for depth exceeding 1.5m & n.exc 3m in depth for foundation etc not exc 10 Sqm in plan and getting out as sin loose race complete all specified and directed. | 10 | Cum | |
| 63 | 63 | All as per item No 62 here-in-before but depth exceeding 3m & n.exc 4.5m | 5 | Cum | |
| 64 | 64 | M&L loose filling with broken bricks of aggregates of gauge 80 to 150 mm in soakage pits, soakage wells etc complete all as specified and directed | 15 | Cum | |
| 65 | 65 | M&L for providing precast reinforced cement concrete type B1 1:2:4 (20 mm graded aggregate) set in Cement Mortor 1:4 for manhole covers complete all as specified and directed note: Reinformcenet shall be measured and paid separately. | 0.03 | Cum | |
| 66 | 66 | M&L Reinforced Cement concrete type B-1 (Using 20mm graded stone aggregates) as in slab supported on walls beams and columns in floors roof landing balconies canopies deck slab and in shelves and the like complete all as specified and directed. | 1.8 | Cum | |
| 67 | 67 | S&F PVC (SWR) vent pipes 75 mm bore single socketed in any length with rubber ringjoints fixed to walls as Vent pipe complete all as specified and directed | 2 | Rm | |
| 68 | 68 | S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed | 1 | Each | |
| 69 | 69 | M&L for removing excavated material rock n exc 50m and depositing where directed at a level n exc 1.5 m abobve the starting point complete all as specified and directed | 27 | Cum | |
| 70 | 70 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick for rough finished flat surfaces of concrete complete all as specified and directed. | 8.3 | Sqm | |
| 71 | 71 | M&L TMTbars 10mm dia and over cut to length, bent to shape required, incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Amealed) not less than 0.9mm dia or securing with clips complete all as specified and directed | 178 | Kg | |
| 72 | 72 | M&L for salt glazed stoneware (SGSW) drain pipes of 150 mm internal dia laid in trenches and jointed complete all as specified and directed. | 35 | RM | |
| 73 | 73 | M&L Cement Concrete (1:3:6) type ‘C-2’ (using 40mm graded stone aggregate) as concrete bed to drain pipes 150 mm bore including packing under the completely surrounding pipes with concrete after they are laid and tested for 150mm dia pipe complete all as specified and directed. | 35 | RM |
AI Tender Summary
Tender Timeline
Sep 14, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 01, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender