Military Engineer Services-MES has published Repair/Rewiring Of Internal Electric Wiring And Light Fitting Alongwith Summer Cooling Appliances At Adm Area Cpe , Itarsi Under Ge ( I ) ( P ) Fy Jabalpur. Submission Date for this Tender is 08-10-2020. Electrification Work Tenders in Itarsi Madhya Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: REPAIR/REWIRING OF INTERNAL ELECTRIC WIRING AND LIGHT FITTING ALONGWITH SUMMER COOLING APPLIANCES AT ADM AREA CPE, ITARSI UNDER GE (I) (P) FY JABALPUR | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking down carefully aluminium / copper point wiring with surface/ concealed PVC conduit or wooden batten ( light, fan, socket, bell or power ) including sunk in cast iron / pressed steel terminal boxes except fitting such as switches, ceiling roses, lamp holders, sockets, regulators, call bells, light fittings of any sketch etc and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engr-in-Charge. | 1002 | Point | |
2 | 2 | M & L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 Volts grade drawn into and including concealed rigid non mettalic PVC conduit medium grade (Make of conduit : Presto Plast/Pressfit) not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel chromium plated terminal boxes, concealed in wall and making & maching the existing surface ) with 3 mm thick hylum brand laminated white bakelite sheet cover for mounting switches, Sockets, Fan regulators etc and 1.5 sq mm multi stranded copper conductor cable as continuous earth wire drawn with wiring and connected to common earth dolly complete all as specified and directed for the following :- One light point/fan point controlled by one switch.\n | 560 | Point | |
3 | 3 | One socket outlet 5 Amps controlled by one switch on the same board. | 95 | Point | |
4 | 4 | One socket outlet 5 Amps controlled by one switch on independent board. | 95 | Point | |
5 | 5 | One bell / buzzer controlled by one bell push. | 20 | Point | |
6 | 6 | One light point controlled by two way switch. | 6 | Point | |
7 | 7 | All as per item No. 2 above but with 2.5 Sq mm multi stranded copper conductor cable for one 15 Amps socket outlet controlled by one switch on independent board and 1.5 Sq mm PVC insulated multistranded copper conductor cable as continuous earth wire complete all as specified and directed by Engr-in-Charge. | 85 | Point | |
8 | 8 | M & L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 Volts grade drawn into and including surface PVC Casing Caping medium grade not less than 19/20 mm (ISI marked) with all fitting and fixing accessories including sunk in cast iron / pressed steel terminal boxes (duly painted with two coats of anti corrosive paint out side and two coats of aluminium paint inside) with 3 mm thick hylum brand laminated white bakelite sheet cover for mounting switches, sockets, fans regulators etc and 1.0 sq mm multi stranded copper conductor cable as continuous earth wire complete for the following :- (a) One light point/fan point controlled by one switch.\n | 80 | Point | |
9 | 9 | One socket outlet 5 Amps controlled by one switch on the same board. | 20 | Point | |
10 | 10 | One socket outlet 5 Amps controlled by one switch on independent board. | 20 | Point | |
11 | 11 | One bell / buzzer controlled by one bell push. | 4 | Point | |
12 | 12 | One light point controlled by two way switch. | 2 | Point | |
13 | 13 | All as per item No. 8 above but with 2.5 Sq mm multi stranded copper conductor cable for one 15 Amps socket outlet controlled by one switch on independent board and 1.5 Sq mm PVC insulated multi stranded copper conductor cable as continuous earth wire complete all as specified and directed by Engr-in-Charge. | 15 | Point | |
14 | 14 | Material and labour in repairs for Sub Main wiring with two single core 4 Sqmm multi stranded copper conductor, FRLS PVC insulated, unsheathed cable including rigid non metallic PVC conduit medium grade, ISI marked, 20 mm dia for sub main wiring including 2.5 sqmm FRLS PVC insulated and unsheathed stranded copper conductor as earth wire in surface/recess and making good to the disturbed surfaces to match the existing surfaces complete including taking down existing unserviceable sub main of any type and size all as specified and directed.\nNote:- Two runs of 04 Sqmm copper conductor cable, one run of 04Sqmm copper conductor and one run of PVC conduit will be measured as one unit. | 300 | RM | |
15 | 15 | Material and labour in repairs for Sub Main wiring with two single core 6.0 Sqmm multi stranded copper conductor, FRLS PVC insulated, unsheathed cable including rigid non metallic PVC conduit medium grade, ISI marked, 20 mm dia for sub main wiring including 6.0 sqmm FRLS PVC insulated and unsheathed stranded copper conductor as earth wire in surface/recess and making good to the disturbed surfaces to match the existing surfaces complete including taking down existing unserviceable sub main of any type and size all as specified and directed.\nNote:- Two runs of 06 Sqmm copper conductor cable, one run of 06 Sqmm copper conductor and one run of PVC conduit will be measured as one unit. | 150 | RM | |
16 | 16 | S & F Switch piano flush type pole one way 5 Amps, 240 V complete all as directed. | 770 | Each | |
17 | 17 | S & F Socket outlet 3 pin 5 Amps, 240 V flush type complete all as directed. | 175 | Each | |
18 | 18 | S & F Bell push, flush type, 5 Amps complete all as directed. | 19 | Each | |
19 | 19 | S & F Switch piano flush type 5 Amps single pole two way complete all as directed. | 8 | Each | |
20 | 20 | S & F Switch piano flush type pole one way 15 Amps, 240 V complete all as directed. | 70 | Each | |
21 | 21 | S & F socket outlet flush type multi purpose 2 in 1, 3 pin 5 and 15 Amp, 230 Volts complete as directed. | 70 | Each | |
22 | 22 | S & F ceiling rose surface bakelight two to three terminal all as directed. | 407 | Each | |
23 | 23 | S & F Ding Dong Bell AC, 240 Volts single pole complete all as specified and as directed. | 24 | Each | |
24 | 24 | S & F Lamp Holder, insulated body, with back plate for batten fitting complete all as directed. | 40 | Each | |
25 | 25 | S & F Electronic step type Fan Regulator socket type 120/280 Watt capacity including connecting up complete all as specified and as directed. | 60 | Each | |
26 | 26 | S & F Modular switch 1 way 6A, 240 Volts 1 module complete all as directed. | 100 | Each | |
27 | 27 | S & F Modular switch 1 way 16A, 240 Volts 1 module complete all as directed. | 30 | Each | |
28 | 28 | S & F Modular Bell push 6A 1 module complete all as directed. | 5 | Each | |
29 | 29 | S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as directed. | 55 | Each | |
30 | 30 | S & F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as directed. | 30 | Each | |
31 | 31 | S & F Modular Fan step regulator, 120W, 240 Volts 2 module complete all as directed. | 30 | Each | |
32 | 32 | S & F White cover plate with frame, 1 module complete all as directed. | 20 | Each | |
33 | 33 | S & F White cover plate with frame but 2 module complete all as directed. | 20 | Each | |
34 | 34 | S & F White cover plate with frame but 3 module complete all as directed. | 20 | Each | |
35 | 35 | S & F White cover plate with frame but 4 module complete all as directed. | 40 | Each | |
36 | 36 | S & F White cover plate with frame but 6 module complete all as directed. | 30 | Each | |
37 | 37 | S & F White cover plate with frame but 8 module complete all as directed. | 40 | Each | |
38 | 38 | S & F White cover blanking plate1 module complete all as directed. | 25 | Each | |
39 | 39 | S & F Metal flush box 1/2 module complete all as directed. | 40 | Each | |
40 | 40 | S & F Metal flush box 3 module complete all as directed. | 20 | Each | |
41 | 41 | S & F Metal flush box 4 module complete all as directed. | 40 | Each | |
42 | 42 | S & F Metal flush box 6 module complete all as directed. | 30 | Each | |
43 | 43 | S & F Metal flush box 8 module complete all as directed. | 40 | Each | |
44 | 44 | S & F in repair Decorative Endura Linear Neo LED lighting fixture 20 Watt, 6000K, (1144mm) with extruded Al. heat shrink, environmental friendly, energy efficient ready to use pack housing with reflector cover channel, with electronic driver, holder, inclding LED tube 20 Watt connector block, etc. complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge. Make- Havells Cat Part No. LHEWEBP7IN1W020 or equivalent in Bajaj/Wipro/Crompton/Philips. | 250 | Each | |
45 | 45 | S & F Decorative Endura Linear Neo LED lighting fixture 10 Watt, 6000K, (581mm) with extruded Al. heat shrink, environmental friendly, energy efficient ready to use pack housing with reflector cover channel, with electronic driver, holder, inclding LED tube 10 Watt connector block, etc. complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge.including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge. Make- Havells Cat Part No. LHEWEBP7IN1W010 or equivalent in Bajaj/Wipro/Crompton/Philips. | 78 | Each | |
46 | 46 | S & F Building light fitting LED 30 Watt energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with toughened glass and impact resistance PF IK07 and GI pipe 40 mm dia, light grade for mounting bracket bent to shape 1.50 RM and fixing arrangement with two Nos of MS clamps set, nut bolts, washers of suitable size and fixing on wall/pole complete including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge. Make Havells Cat Part No : ENDURAPEARLSL30WLED757SASYTOPCMP or equivalent in Bajaj/Wipro/Crompton/Philips. | 50 | Each | |
47 | 47 | S & F Decorative wall light fixture made up of Polycarbonate, suitable for LED/CFL complete including one No. LED bulb 9 Watt fixing the fitting on teak wood board size 4"x6" including all necessary fixing accessories including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge. Make-Havells Catt Pt No-LHDL03160099 or equivalent in Bajaj/Wipro/Crompton/Philips. | 100 | Each | |
48 | 48 | S & F recessed mounting aesthetically designed 2 x 2 LED Flat panel , 48W LED 5700K which provides soft-light and glare free symmetrical illumination also for false ceiling size 2'x2', Decorative of matric false ceiling type arm strong/US gypsum or similar ceiling mounting system with concealed including 3 Nos 36 Watt CFL light complete including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge. (Make - Havells Cat Part No. LHEWEBP7UL1W048 or equivalent in Bajaj/Wipro/Crompton/Philips. | 19 | Each | |
49 | 49 | Material and labour in repairs LED Ceiling surface light fitting 15 Watt, 230V Ceiling surface mounted decorative type round in shape, with driver and LED lamp connector block etc. complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge. Make - Havells Cat Part No LHEAAGP6IA2W012 or equivalent in Bajaj/Wipro/Crompton/Philips. | 40 | Each | |
50 | 50 | Material and labour in repairs HEXA 10 W-IP-66 Bulk Head luminaries, with lamp holders, LED 10W etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge. Make - Havells Cat No : HEXAFT10WLED857SSYMBOPC or equivalent in Bajaj/Wipro/Crompton/Philips. | 25 | Each | |
51 | 51 | S & F post top lantern RUBY (CLEAR)-IP65, new generation, post top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, including and fixing the fitting with 50 mm dia GI pipe 'medium grade' 0.5 mtr length including civil work (excavation and PCC work) and connection complete including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge. Make- Havells Cat Part No.RUBYOT25WLED757PSYMTOPC or equivalent in Bajaj/Wipro/Crompton/Philips. | 12 | Each | |
52 | 52 | S & F in repair on load change over switch 125Amps, 4 pole, 415 Volts, 50 Hz with S S Enclosure complete including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge. Make- Havells Cat Ref IHCSFE0125 or equivalent in Bajaj/Wipro/Crompton/Philips. | 4 | Each | |
53 | 53 | S & F sheet metal enclosure MCB DB 4 way tripple pole and neutral 415 Volts complete including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge. | 8 | Each | |
54 | 54 | Supply and fix for sheet metal enclosures for SPN DB's 240 volts, factory made double door flush type, IP-42 protection and all as per IS-8623, made from sheet metal 8 way 200 amps rated bus bar to be fixed with wall all accessories complete including taking down unserviceable fitting complete all as specified and as directed. \n | 20 | Each | |
55 | 55 | S & F Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20 Amps 240 volts complete including taking down unserviceable fitting complete all as specified and as directed. | 20 | Each | |
56 | 56 | S & F MCB single pole 240 volts 6 to 32 Amps complete including taking down unserviceable fitting complete all as specified and as directed. | 160 | Each | |
57 | 57 | S & F MCB double pole 240 volts 16 to 40 Amps complete including taking down unserviceable fitting complete all as specified and as directed. | 30 | Each | |
58 | 58 | S & F MCB TPN 40 Amp 440 Volts including taking down unserviceable fitting complete all as specified and as directed. | 10 | Each | |
59 | 59 | S & F MCB double pole 240 Volts 63 Amps complete.\nNote for item No. 56 to 59 : For MCB,s & MCB DB's, MCB shall be of 10 kA breaking capacity having 'C' characteristics as per IS-8828 with air circulating channels, bicontact terminals, dual position DIN rail clamps with IP-20 degree of protection, insulating sliding shutter, MCB for DB's shall be of same make of DB's, wiring cable shall be connected to MCB's with suitable lugs (Copper lugs for copper cable and aluminium lugs for aluminium cable). MCB Ics = 100% Icu | 10 | Each | |
60 | 60 | S & F Switch fuse sheet metal iron clad tripple pole with neutral link 415 Volts, 100 Amps complete including connection with lugs of suitable size including taking down unserviceable fitting complete all as specified and as directed. | 5 | Each | |
61 | 61 | Earthing complete with glavanised steel earth plate elactrode 600x600x6.0 mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground levels) with top edge of the plate not less than 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut, bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No. 03 of MES SSR Pt-I 1991 and as directed. | 8 | Each Job | |
62 | 62 | S & F in repair energy saver Electronic ballast 36 Watt . Make- Havells Cat Part No. LHBF02904025 or equivalent in Bajaj/Wipro/Crompton/Philips. | 150 | Each | |
63 | 63 | S & F in repair Bipin Holder complete all as directed | 30 | Each | |
64 | 64 | S & F in repair starter 110/240 Volts complete. Make- Havells Cat Part No. LHNF07104000 or equivalent in Bajaj/Wipro/Crompton/Philips. | 50 | Each | |
65 | 65 | S & F Endura Linear Neo wall/surface mounted LED batten 20 Watt, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with connection of fitting with suitable copper wire and taking down unserviceable existing fitting all as specified and as directed by Engr-in-Charge . (Make - Havells Cat Pt No-ENDURALINEARNEOBS20WLED830SPCWH or equivalent in Bajaj/Wipro/Crompton/Philips. | 60 | Each | |
66 | 66 | S & F including taking down the existing fitting LED lamp 7 Watt complete all as directed. | 100 | Each | |
67 | 67 | Taking down ceiling fans/ exhaust fan / wall bracket fan of any sweep and make from any position carefully including disconnection of electric supply and disconnection of blades from fan and deposit in MES store for carrying out necessary repair/rewinding i.e overhauling, painting etc complete all as specified and directed. | 281 | EACH\nJOB | |
68 | 68 | Removing the burnt out copper winding of ceiling fans of any make, size 1200 mm sweep and rewinding with super enamelled copper wire of approved quality of existing gauge and size including necessary insulation with leathoroid sheet varnishing of winding of coil, packing, proper insulation, gasket etc., including cleaning the rotor and the stator, overhauling, lubricating with fresh graese, assembling including rehanging in position, testing and commissioning complete all as specified and directed. | 152 | EACH\nJOB | |
69 | 69 | All as per Sl. item No. 68 here in above but size 1400 mm sweep complete all as directed. | 60 | EACH\nJOB | |
70 | 70 | All as per Sl. item No. 68 here in above but for exhaust fan of size 300 mm sweep complete all as directed. | 8 | EACH\nJOB | |
71 | 71 | All as per Sl. item No. 68 here in above but for size 450 mm sweep complete all as directed. | 8 | EACH\nJOB | |
72 | 72 | All as per Sl. item No. 68 here in above but wall bracket fan of any sweep complete all as directed. | 8 | EACH\nJOB | |
73 | 73 | Opening up ceiling fan of any make and any sweep for overhauling such as cleaning the rotor and the stator, overhauling, lubricating with fresh oil/ graese, reassembling for proper running including rehanging in position and connecting up, testing and commissioning complete all as specified and directed.\nNote: Any unserviceable/burnout parts replaced shall be measured and paid separately under relavent items. However quoted rates shall be deemed to be included for rectification of any defect in the fan. | 45 | EACH \nJOB | |
74 | 74 | Supply only capacitor 2.5/3.15 mfd, 230 volts for ceiling fans 1200/1400 mm sweep and any make complete all as directed. | 212 | EACH | |
75 | 75 | Supply only capacitor 4 mfd suitable for exhaust fans 300/450 mm sweep complete all as directed. | 15 | EACH | |
76 | 76 | Supply only ball bearing suitable for ceiling fan sweep 1200 mm complete all as directed. | 50 | EACH | |
77 | 77 | Supply only ball bearing suitable for ceiling fan sweep 1400 mm complete all as directed. | 20 | EACH | |
78 | 78 | Supply and fix split pin suitable for ceiling fan/exhaust fan of any sweep and make complete all as directed. | 80 | EACH | |
79 | 79 | Supply only thrust rubber suitable for ceiling fan of any make and size complete all as directed. | 50 | EACH | |
80 | 80 | Supply only self lubricating bush of gun metal as per ceiling fan/exhaust fan complete all as directed. | 25 | EACH | |
81 | 81 | Supply only shaft of approved quality for ceiling fan/exhaust fan any make, type and size complete all as directed. | 5 | EACH | |
82 | 82 | Supply and fix isolating gear suitable for bracket fan of any type and size complete all aspecified and directed. | 5 | EACH | |
83 | 83 | Material and labour for preparing the surface of body/blades of ceiling fan, any sweep and make, applying one coat of spray paint with synthetic encamel white paint and writing the MES No. maker's serial No. etc with sythentic enamel black paint 1.5cm high letters complete all as directed. | 212 | EACH | |
84 | 84 | Supply and fix PVC insulated, unsheathed three core copper flexible cable of size 2.5 sqmm including connection complete all as directed. | 100 | RM | |
85 | 85 | Supply and fix PVC insulated, unsheathed three core copper flexible cable of size 1.5 sqmm including connection complete all as directed. | 200 | RM | |
86 | 86 | S & F Electronic step type Fan regulator socket type 120/280 watt capacity including connecting up complete all as directed. | 60 | Each | |
87 | 87 | Supply and fix stop valve / angle valve cast copper alloy, screwed down, high pressure with ctutch or butterfly handles, screwed both ends for iron pipe 15mm dia complete all as specified and directed. | 10 | EACH | |
88 | 88 | Supply and fixing in replacement of desert air cooler made up of MS sheet with copper wounde exhaust motor with capacitor, copper winded water pump 230V single phase, 50Hz and ON OFF switch,regulator, water tank capacity up to 75 ltr duly painted with double coated complete all as specified and directed. | 7 | Each | |
89 | 89 | Supply and fix bib tap cast copper alloy, screwed down, high pressure with ctutch for iron pipe 15mm dia complete all as specified and directed. | 10 | EACH | |
90 | 90 | Supply and fix hermetically sealed unit compressor, semi spherical type, working on 230 Volts, 50 Hz suitable for water cooler of capacity 40 to 80 litrs including first fill of refrigerant gas, breezing jointing leak testing and commissioning complete all as specified and directed. | 2 | EACH \nJOB | |
91 | 91 | Supply and fix hermetically sealed unit compressor, semi spherical type, working on 230 volts, 50 Hz suitable for window type AC, 1.5 ton capacity including first fill of refrigerant gas, breezing, jointing, leak testing and commissioning complete all as specified and directed. | 2 | EACH \nJOB | |
92 | 92 | Supply and fix hermetically sealed unit compressor, semi spherical type, working on 230 volts, 50 Hz suitable for split AC 1.5 ton including first fill of refrigerant gas, breezing, jointing, leak testing and commissiong complete all as specified and directed. | 2 | EACH \nJOB | |
93 | 93 | Supply and fix in repair out door unit for spit type air conditioner 1.5 ton including condenser, blower motor with fan and hermetically sealed unit compressor, semi spherical type, working on 230 volts, 50 Hz, first fill of refrigerant gas, complete with refrigerent gas tube connection and electrical connectin terminal with commissiong complete all as specified and directed. | 2 | EACH \n | |
94 | 94 | Material and labour for repairing of split/window air conditioner, water cooler, refregerator, arresting the leackage with nitrogen gas with adequet pressure replacing the deffective parts like, blower motor, copper tubing, condenser motor, thermostate, over load relay, condenser, starting relay, filling the refrigerent gas after vaccuming etc. and making the appliances serviceable complete all as per specified and directed.\nNote:-\n(i). Nitrogen gas for testing of leackage will be supplied by the contractor and rate for the same shall be deemed to be included in unit rate quoted. \n(ii). Blower motor, copper tubing, condenser motor, thermostate, over load relay, condenser, starting relay, filling the refrigerent gas shall be measured and paid under relavent items. | 12 | EACH JOB | |
95 | 95 | Supply only 1/4" copper tubing for AC water cooler and refrigerator complete all as directed. | 0.5 | KG | |
96 | 96 | Supply only 1/8" copper tubing for AC water cooler and refrigerator complete all as directed. | 0.5 | KG | |
97 | 97 | Supply and fix 60-80 MFD starting capacitor complete all as directed.\n | 3 | EACH | |
98 | 98 | All as per Sl. item No. 97 here in above but 80 -100 MFD. | 3 | EACH | |
99 | 99 | All as per Sl. item No. 97 here in above but 100 -120 MFD. | 3 | EACH | |
100 | 100 | Supply and fix 36 MFD running capacitors complete all as directed.\n | 3 | EACH | |
101 | 101 | All as per Sl. item No. 100 here in above but 25 MFD. | 3 | EACH | |
102 | 102 | All as per Sl. item No. 100 here in above but 16 MFD. | 3 | EACH | |
103 | 103 | All as per Sl. item No. 100 here in above but 8 MFD. | 3 | EACH | |
104 | 104 | Supply and fix over load protector as per existing make, sizes, model and capacity suitable for existing compressor of water cooler, refrigerator, air conditioner etc., complete all as directed. | 5 | EACH | |
105 | 105 | Supply and fix thermostate switch with knob for window type air conditioner existing make complete all as directed. | 5 | EACH | |
106 | 106 | All as per Sl. item No. 105 here in above but for water cooler and refrigerator. | 5 | EACH | |
107 | 107 | Supply and fix push type tap 15mm bore, brass chromium plated for water cooler complete all as directed. | 5 | EACH | |
108 | 108 | Supply and fix blower motor, 230 Volts, single phase, 50Hz suitable for AC, water cooler of 1/4 HP capacity complete all as specified and directed. \n | 3 | EACH | |
109 | 109 | All as per Sl. item No. 108 here in above but 1/6 HP capacity. | 3 | EACH | |
110 | 110 | Supply and fix starting relays as per existing sizes/ model suitable for existing compressor of water cooler, air conditioner etc., complete all as directed.\n | 5 | EACH | |
111 | 111 | Removing storage type water cooler of capacity 40 to 80 litrs from site and refixing the same after carry out the following works complete all as and directed:-\n(i) Rubbing the water cooler body after cleaning the complete body/surface fully rust free and applying putty wherever required. \n(ii) Applying two coats of superior quality synthetic enamel paint over one coat of red oxide primer to the outer surface except back side.\n(iii) Applying one coat of corrosive resistant paint and one coat of spray enamel paint inside including tinkering of sheet where ever required.\n(iv) Oiling/ greasing to fan motor.\n(v) Back side of water cooler shall be painted by black paint including marking the serial No. MES No _ _ . etc., on the cooler. \nNote: Painting shall be applied by spray machine only. | 2 | EACH \nJOB | |
112 | 112 | Supply and charging of refrigrent R-22 gas for water cooler, AC, and refrigerator up to desired pressure complete all as directed.\n\n | 13.6 | KG | |
113 | 113 | Supply and charging of Refrigerent R-134a gas for water cooler, AC, and refrigerator up to desired pressure complete all as directed.\nNote for Sl. item Nos. 112 and 113 :- Refrigerent gas shall be supllied in sealed container only.\n\n | 10 | KG | |
114 | 114 | Supply and fix box/ pin type relay for compressor protection of refrigerator as per existing, including testing complete all as directed. | 3 | EACH | |
115 | 115 | Taking down window/ split type AC from existing bracket/ support for cleaning internally oiling, greasing of blower motor/ fan including painting the chasis, wrtting MES No. etc., and refixing the same in position complete all as directed. | 6 | EACH \nJOB | |
116 | 116 | Supply and install capacitor, metalized poly propylene heavy duty (MPP-H) three phase, 415 volts and 50 Hz system for permissible non-linear load 15 % of 5 KVAR capacity complete all as directed. | 2 | EACH | |
117 | 117 | Material and labour for comprehensive maintenance of storage type geyser 25/50 litrs cpacity of any make and any description and carrying out the work such as cleaning of inlet and outlet water tubing removing of any leakage in geyser assembly and pipes including checking of electric connection and proper earthing to geyser, refixing after repair/ replacement of worn out nuts, bolts and washers etc., complete all as directed.\nNote: Spare parts of the geyser if any replaced shall be measered any paid under relavant item. | 25 | EACH \nJOB | |
118 | 118 | Supply only heating element push type, single phase, 1.5 KW complete all as directed. | 15 | EACH | |
119 | 119 | Supply only heating element traingle type, single phase, 1.5 KW complete all as directed. | 10 | EACH | |
120 | 120 | Supply only themostate 9"/12" required for any type of geyser capacity 25/50 litrs with temperature adjustable knob and range of temparetur 0-80 degree celceius complete all as directed. | 25 | EACH | |
121 | 121 | Supply only geyser assembly for any type of geyser of capacity 25 litrs with rubber gasket, nuts, bolts and washers complete all as directed | 3 | EACH | |
122 | 122 | Supply only indicator lamp with holder of required colour for any type of geyser of capacity 25/50 litrs with rubber gasket, nuts bolts and washers complete all as directed. | 10 | EACH | |
123 | 123 | Supply and fix PVC connection of 15mm size, spirally reinforced with stainless steel wire inside the pipe for outlet hot water pipe connection with brass nuts at both ends of length 450 mm complete all as directeed. | 40 | EACH | |
124 | 124 | M&L Scrapping the old painted surfaces of geyser, cleaning and painting with two coats of white synthetic enamel paint over & including a coat of red oxide primer including writing MES No. with black paint with minimum 25 mm size of letters all as directed at site for 25 liters capacity geysers complete. | 5 | Each | |
125 | 125 | Supply and replacement of water lifting pump (water immersed) for desert cooler with model - HM - 09, 240 volts, 50 Hz, 12 watts, 1.5 metre max head and output 800 LPH complete all as directed. | 12 | EACH | |
126 | 126 | Supply and fix khas pads/wood wool pad of required size for desert cooler of any make complete all as directed. | 10 | SET\n OF\nTHREE | |
127 | 127 | Supply and fix blower motor, 230 volts, single phase, 50 Hz, suitable for desert cooler size 450/600mm as per site requirement including kit consists of mounting clamps, blades, speed contol switch, nut, bolts and washers complete all as specified and directed. | 12 | EACH | |
128 | 128 | Repair the the unserviceable solar water heating system and making serviceable by filling the Distilled water, cleaning the solar touch end glass, stopping the leackage with replacing the old unserviceable CPVC pipe/tee/bend/broken glass tubes etc. complete all as specified and directed. Note: CPVC pipe /glass tubes,CPVC acessories will be measured and paid saperately in respective item. | 8 | Each Job | |
129 | 129 | Supply and fixing in repair 20 mm external dia Chlorinated Poly Vinyl Chloride (CPVC) pipe consisting of high grade polymer effectively bonded in the inside and outside of an aluminium tube CPVC-AL-CPVC by melt adhesive(including joining/fixing with cement solvent) suitable for hot water supply from solar water heater to the bathrooms and fixed to wall, ceiling etc. including all materials, fittings and fixing works and testing of pipe line test for solvent cement joints and adhesive joints and testing of all materials shall be as per manufactures instructions, literature and confirming to IS-15450 : 2004 or ASTM -1282 including making good the disturbed surfaces complete all as specified and directed. | 50 | RM | |
130 | 130 | S & F in repair Special grade Borocilicate glass tube length of tube 1500 mm tube outer diameter 47 mm inner tube diameter 37 mm with selective absorption coating layer make on tube Tata BP compatible with 100 LPD and 200 LPD solar water heater .complete all as specified and directed. | 10 | No | |
131 | 131 | S & F in repair 100 LPD Tata BP make Puf insulated hot water storage tank for 100 LPD solar water heater storage tank material 316 grade stanless steel outer clading material powdar coated GI sheet. complete all as specified and directed. | 1 | Each | |
132 | 132 | S & F in repair anti rust ring for 1500 x 47 mm size special grade borocilicate glass tube (pack of 20 pieces each) complete all as specified and directed. | 5 | Each | |
133 | 133 | S & F in repair silicon ring for 1500 x 47 mm size Tata BP special grade borocilivate glass tube (pack of 20 pieces each) complete all as specified and directed. | 5 | Each | |
134 | 134 | S & F in repair plastic tube holder for 1500 x 47 mm size Tata BP special grade borocilivate glass tube (pack of 20 pieces each) complete all as specified and directed. | 5 | Each | |
135 | 135 | S & F in repair brass elbo suitable for CPVC pipe line of size 20 mm complete jointing etc all as specified and directed. | 10 | Each | |
136 | 136 | S&F in repair brass Tee suitable for CPVC pipe line of size 20 mm complete jointing etc all as specified and directed. | 8 | Each | |
137 | 137 | S & F in repair Female brass threaded adopter suitable for CPVC pipe line of size 20mm complete jointing etc all as specified and directed. | 8 | Each | |
138 | 138 | S&F in repairs Sheet metal inclosure with earth plug and socket single pole and neutral with single pole MCB 20 Amps 240 volts complete all as directed. | 10 | Each | |
139 | 139 | M & L for repairing of RO based aqua guard installed for water cooler, with replacement of candle, checking of AC supply circuitary of aqua guard and made functional, replacement of step down transformer 230 volt to 12/24 volts, as per sample and complete all as directed at site. | 2 | Each | |
140 | 140 | S & F in repair /Replacement of Membrane of RO plant machine capacity 50 Ltr/Hrs. | 6 | Each | |
141 | 141 | S & F in repair /Replacement of Pree filter candle RO plant machine capacity 50 Ltr/Hrs, Activated carbon granuals twice and carbon black | 2 | Each | |
142 | 142 | S & F in repair /Replacement of Diaphragm Pump 24 volt DC and open flow minimum 2.0 Ltr/min as per site requirement. | 4 | Each | |
143 | 143 | S & F in replacement of worn out/exhausted parts during the servicing such as Step down transformer and PCB with parts and all electrical parts / PVC pipes small pices for inlet and outlet connection of unit as per site requirement. | 2 | Each Job | |
144 | 144 | Supply and fixing of heavy duty exhaust fan 300 mm sweep, turbo force 1400 RPM, single phase, totally enclosed heavy duty motor, with copper winding, aluminium rotor mounted on 2 ball bearings including mounting brackets fixing on frame complete all as specified and directed. | 7 | Each | |
145 | 145 | Supply and Replacement of voltage stabilizer of capacity 5 KVA installing and testing complete all as specified and directed. | 6 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail