Military Engineer Services-MES has published Repair And Maintenance Of Eot Cranes Fire Fighting Equipments Non Clogging Pump Sets Cleaning Of Sewage Sumps Static Water Tanks And Allied Works At Pxe Chandipur. Submission Date for this Tender is 05-10-2020. Cranes Tenders in Chandipur Odisha. Bidders can get complete Tender details and download the document.
| Name of Work: REPAIR AND MAINT OF EOT CRANES, FIRE FIGHTING EQUIPMENTS, NON-CLOGGING PUMP SETS CLEANING OF SEWAGE SUMPS, STATIC WATER TANKS AND ALLIED WORKS AT PXE CHANDIPUR | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Servicing of various components of Electrically operated crane of capacity range from 3 Tonne to 5 Tonne of any span of cross / long travel and height of hoist for carrying out over hauling and repairing various items, refixing the components in its position after carrying out overhauling and repairing work including checking and re-wiring of crane control panel faulty electrical circuit using control copper conductor, making all electric connections functional , cleaning of tracks with approved cleaners, greasing for smooth running of wheels, pulleys, steel wire rope etc and load testing of crane after carrying out all repair works all as specified and directed.\nNote:- (i) Loads as required for testing shall be arranged by the user.\n(ii) Transportation of loads for testing from the place of issue and return to the place of issue shall be responsibility of the contractor. | 9 | JOB | |
| 2 | 2 | Servicing of various components of Electrically operated crane of capacity 10 Tonne of any span of cross / long travel and height of hoist for carrying out over hauling and repairing various items, refixing the components in its position after carrying out overhauling and repairing work including checking and re-wiring of crane control panel faulty electrical circuit using control copper conductor, making all electric connections functional , cleaning of tracks with approved cleaners, greasing for smooth running of wheels, pulleys, steel wire rope etc and load testing of crane after carrying out all repair works all as specified and directed.\nNote:- (i) Loads as required for testing shall be arranged by the user.\n(ii) Transportation of loads for testing from the place of issue and return to the place of issue shall be responsibility of the contractor. | 4 | JOB | |
| 3 | 3 | Dismantling and taking down of hoist/creap/ LT/CT unservicable electric motor of EOT Crane, 415 Volts 3 phase , 15 HP capacity, disconnection of incoming electric connection from panel, gear box and transported to workshop , stripping out burnt wiring, cleaning slots and rewinding the motor with super enameled copper wire as per existing size and gauge including insulating materials and varnishing, replacing worn out bearing as per existing size, reassembling the motor after rewinding and mounting on its original position including replacing the old unserviceable nuts, bolts and tested completed all as directed . | 1 | JOB | |
| 4 | 4 | All as per Item No.3 above but of capacity 5 HP | 1 | JOB | |
| 5 | 5 | All as per Item No.3 above but of capacity 3 HP | 1 | JOB | |
| 6 | 6 | All as per Item No.3 above but of capacity 1 HP | 1 | JOB | |
| 7 | 7 | Dismentling of main hoist gear box of EOT crane capacity 3 to 5 tonne removing it from its position carefully and transporting to the work shop and refixing the same to its original positions after servicing and replacement of worn out gears and followers of same shape and size, machining the gear shaft to suit in new gear complete all as directed. Note : (i) Consumable stores like cotton waste/cleaning materials , metal filling , machining , packing seals,gasket , nuts, bolts and washers and transportation from site to work shop are deemed to be included in rate quoted.(ii) Gear and followers and gear oil to be measured and paid separately. | 2 | JOB | |
| 8 | 7.01 | supply only main hoist grar in main hoist gear box | 2 | EACH | |
| 9 | 7.02 | supply only main hoist pinion in main hoist gear box | 2 | EACH | |
| 10 | 8 | All as per item no -7 but Creap hoist gear box of EOT crane capacity 5 Tonne. | 1 | JOB | |
| 11 | 8.01 | supply only creap hoist grar in Creap hoist gear box | 1 | EACH | |
| 12 | 8.02 | supply only creap hoist pinion in Creap hoist gear box | 1 | EACH | |
| 13 | 9 | All as per item no -7 but Cross Travel gear box of EOT crane capacity 3 to 5 Tonne. | 2 | JOB | |
| 14 | 9.01 | supply only worm gear in Cross Travel gear box | 2 | EACH | |
| 15 | 9.02 | supply only worm shaft in Cross Travel gear box | 2 | EACH | |
| 16 | 10 | All as per item no -7 but Long travel gear box of EOT crane capacity 3 to 5 Tonne. | 2 | JOB | |
| 17 | 10.01 | supply only worm gear in Long Travel gear box | 2 | EACH | |
| 18 | 10.02 | supply only worm shaft in Long Travel gear box | 2 | EACH | |
| 19 | 11 | Dismentling of main hoist gear box of EOT crane capacity 10 Tonne removing it from its position carefully and transporting to the work shop and refixing the same to its original positions after servicing and replacement of worn out gears and followers of same shape and size, machining the gear shaft to suit in new gear complete all as directed. Note : (i) Consumable stores like cotton waste/cleaning materials , metal filling , machining , packing seals,gasket , nuts, bolts and washers and transportation from site to work shop are deemed to be included in rate quoted.(ii) Gear and followers and gear oil to be measured and paid separately. | 1 | JOB | |
| 20 | 11.01 | supply only main hoist grar in main hoist gear box | 1 | EACH | |
| 21 | 11.02 | supply only main hoist pinion in main hoist gear box | 1 | EACH | |
| 22 | 12 | All as per item no -11 but Creap hoist gear box of EOT crane capacity 10 Tonne. | 1 | JOB | |
| 23 | 12.01 | supply only creap hoist grar in Creap hoist gear box | 1 | EACH | |
| 24 | 12.02 | supply only creap hoist pinion in Creap hoist gear box | 1 | EACH | |
| 25 | 13 | All as per item no -11 but Cross Travel gear box of EOT crane capacity 10 Tonne. | 1 | JOB | |
| 26 | 13.01 | supply only Cross Travel grar in Cross Travel gear box | 1 | EACH | |
| 27 | 13.02 | supply onlyCross Travel pinion in Cross Travel gear box | 1 | EACH | |
| 28 | 14 | All as per item no -11 but Long travel gear box of EOT crane capacity 10 Tonne. | 2 | JOB | |
| 29 | 14.01 | supply only Long Travel grar in long Travel gear box | 2 | EACH | |
| 30 | 14.02 | supply only long Travel pinion in long Travel gear box | 2 | EACH | |
| 31 | 15 | Repair/ Overhauling the electro hydraulic thruster break of 3 to 5 tonne EOT crane with gear holding Hoist/Cross travel/long travel, rewinding the burn out winding of thruster coil with super enamel copper wire of existing gauge and varnishing, heating and testing etc complete repairing of oil pump by replacing worn out parts, oil seal, ‘O’ ring and bush and bearing – 02 nos, check nuts, lock pin all as required including draining out used oil all as specified and directed. | 4 | JOB | |
| 32 | 16 | Repair/ Overhauling the electro hydraulic thruster break of 10 tonne EOT crane with gear holding Hoist/Cross travel/long travel, rewinding the burn out winding of thruster coil with super enamel copper wire of existing gauge and varnishing, heating and testing etc complete repairing of oil pump by replacing worn out parts, oil seal, ‘O’ ring and bush and bearing – 02 nos, check nuts, lock pin all as required including draining out used oil all as specified and directed. | 4 | JOB | |
| 33 | 17 | Supply only gear oil for gear box.\n(Make – IOC/ SP-320/SERVOMESH-40/HP) | 75 | LTR | |
| 34 | 18 | Supply and filling of transformer oil including drain out the used transformer oil suitable for electro hydraulic thruster break of EOT crane.\n(Make - Gulf/Power oil/HP) | 22 | LTR | |
| 35 | 19 | S&F electro hydraulic thruster break shoes on drum diameter 160 mm in pair (02 Nos) with necessary copper rivets complete including taking down old unserviceable one:- \n(Make – Ferrodo liner/ Usha/Tojym) | 2 | EACH | |
| 36 | 20 | S&F electro hydraulic thruster break shoes on drum diameter 150 mm in pair (02 Nos) with necessary copper rivets complete including taking down old unserviceable one:- \n(Make – Ferrodo liner/ Usha/Tojym) | 4 | EACH | |
| 37 | 21 | S&F electro hydraulic thruster break shoes on drum diameter 100 mm in pair (02 Nos) with necessary copper rivets complete including taking down old unserviceable one:- \n(Make – Ferrodo liner/ Usha/Tojym) | 4 | EACH | |
| 38 | 22 | S&F flexible copper cable of size 10 sq mm, 4 core,1100 V including provision of movable clamps including taking down old unserviceable cable. \n(Make - Polycabs/Fincab/Plaza) | 180 | RM | |
| 39 | 23 | S&F flexible copper cable of size 4 sq mm, 4 core 1100V , Conferming IS:694 including provision of movable clamps including taking down old unserviceable cable. \n(Make - Finolex/Polycabs/Plaza) | 75 | RM | |
| 40 | 24 | S&F copper cable of size 2.5 sq mm, 3 core ,1100 V, Conferming IS :694 ,including connections and taking down old unserviceable cable. \n(Make - Polycabs/Finolex/Plaza) | 100 | RM | |
| 41 | 25 | S&F copper cable of size 1.5 sq mm, 3 core ,1100 V, Conferming IS :694 ,including connections and taking down old unserviceable cable. \n(Make - Polycabs/Finolex/Plaza) | 150 | RM | |
| 42 | 26 | S&F rotary type limit switch for hoist motion suitable for 3 Tonne to 10 Tonne capacity EOT crane main hoist, Make : Speedocontrol/Siemens/CMK electropower | 5 | EACH | |
| 43 | 27 | S&F Lever type limit switch for CT/LT suitable for 3 Tonne to 10 Tonne capacity EOT crane main hoist, Make : Speedocontrol/Siemens/CMK electropower. | 4 | EACH | |
| 44 | 28 | S&F in repair electromagnatic brake coil suitable for 3 to 5 Tonne capacity crane brake system including taking down old unserviceable one all as directed and specified. | 5 | EACH | |
| 45 | 29 | S&F in repair electromagnatic brake coil suitable for 10 Tonne capacity crane brake system including taking down old unserviceable one all as directed and specified. | 2 | EACH | |
| 46 | 30 | S&F split pillow two bolt block housing with bearing of SKC SN series as per existing sizes for long travel / cross travel shaft 50-55 mm dia end support including taking down old unserviceable one Suitable for 3 to 10 Tonne crane\n(Make – SKF/NBC/FAG) | 4 | EACH | |
| 47 | 31 | S&F pillow block housing with bearing SKC SN series as per existing size for shaft sizes 40 mm dia for long travel / cross travel shaft support to arrest redial movement including taking down old unserviceable one:- \n(Make – SKF/NBC/FAG) | 10 | EACH | |
| 48 | 32 | S&F non friction spherical Ball bearing as per existing sizes 6208 for hoist end /long travel / cross travel shaft support including taking down old unserviceable one all as directed and specified. \n(Make – Tata/SKF/NBC) | 8 | EACH | |
| 49 | 33 | S&F non friction spherical Ball bearing as per existing sizes 6310 for Main hoist /creap hoist /long travel / cross travel gear box including taking down old unserviceable one all as directed and specified. \n(Make – Tata/SKF/NBC) | 6 | EACH | |
| 50 | 34 | S&F non friction spherical Ball bearing as per existing sizes 6312 for Main hoist /creap hoist /long travel / cross travel gear box including taking down old unserviceable one all as directed and specified. \n(Make – Tata/SKF/NBC) | 6 | EACH | |
| 51 | 35 | S&F time delay relay with NO + NC coil volt 0.5 to 60 Sec, including taking down old unserviceable one all as directed and specified.\n(Make – BCH/Siemens/L&T) | 2 | EACH | |
| 52 | 36 | S&F bimetal over load relay of range 20 to 32 Amps for 3 to 5 Tonne EOT crane including taking down old unserviceable one all as directed and specified.\n(Make – BCH/Siemens/L&T) | 1 | EACH | |
| 53 | 37 | S&F bimetal over load relay of range 16 to 25 Amps for 10 Tonne EOT crane including taking down old unserviceable one all as directed and specified. \n(Make – BCH/Siemens/L&T) | 2 | EACH | |
| 54 | 38 | S&F in repair push botTonne switch of capacity suitable for 3 to 10 Tonne capacity EOT crane main hoist . | 5 | EACH | |
| 55 | 39 | S&F step down transformer of PRI.V. 230 , SEC.V. -110, VA 200 ,Cycle 50Hz suitable for 3 to 5 Tonne capacity EOT crane including taking down old unserviceable one all as specified and directed .\nMake-AEI or equivalent | 2 | EACH | |
| 56 | 40 | S&F step down transformer of PRI.V. 415 , SEC.V.-110, VA 2500 Cucle 50 Hz suitable for 10 Tonne capacity EOT crane including taking down old unserviceable one all as specified and directed . | 1 | EACH | |
| 57 | 41 | S&F in repair steel wire rope of size 6 mm dia, 6 x 36 construction and fibre core with minimum tensile strength 180 Kg/sqmm including greasing complete all as directed by Engineer-in-Charge. \n(Make: USHA MARTIN/ BOMBAY FOOT/NATIONAL) | 85 | RM | |
| 58 | 42 | S&F for replacementof steel wire rope of size 4 mm dia (as per existing ) with required nut bolts hook with D- Clamp including taking down U/S one complete all as directed by Engineer-in-Charge. \n(Make: USHA MARTIN/ BOMBAY FOOT/NATIONAL) | 200 | RM | |
| 59 | 43 | S&F T-track crane cable trolly with 04 no of wheel as per existing size suitable for 5 to 10 Tonne capacity EOT crane complete all as directed by Engineer-in-Charge. | 12 | EACH | |
| 60 | 44 | S&F electro hydraulic thruster break drum of dia 100 mm made of cast iron suitable for 5 to 10 Tonne capacity EOT crane complete all as directed by Engineer-in-Charge. | 2 | EACH | |
| 61 | 45 | S&F electro hydraulic thruster break drum of dia 150/160 mm made of cast iron suitable for 5 to 10 Tonne capacity EOT crane complete all as directed by Engineer-in-Charge. | 2 | EACH | |
| 62 | 46 | S&F Flange coupling for 40 mm dia shaft to connect LT/CT gear box to drive Crane wheel suitable for 3 to 10 Tonne capacity EOT crane complete all as directed by Engineer-in-Charge. | 4 | EACH | |
| 63 | 47 | S&F metal body pendent 10 way push botten switch with start and stop botten suitable for 3 to 5 Tonne capacity EOT crane. | 1 | EACH | |
| 64 | 48 | S&F metal body pendent 12 way push botten switch with start and stop botten with locking key suitable for 10 Tonne capacity EOT crane. | 1 | EACH | |
| 65 | 49 | Supply and fix control cable 1.5 sqmm ,12 Core,1100V, Pvc insulated & sheathed copper flexible cable As per IS 694 Black in colour. | 50 | RM | |
| 66 | 50 | Supply and fix control cable 1 sqmm ,19 Core,1100V, Pvc insulated & sheathed copper flexible cable As per IS 694 Black in colour. | 60 | RM | |
| 67 | 51 | S&F in repair VVVF drive of suitable capaciting for hoisting motion of 5.0 Tonnene capacity EOT crane including replacement of old unserviciable VVVF drive complete all as directed by Engineer-in-Charge. \n(Make: Yasakawa/BCH/Simens) | 1 | EACH | |
| 68 | 52 | S&F in repair VVVF drive of suitable capaciting for hoisting motion of 10.0 Tonnene capacity EOT crane including replacement of old unserviciable VVVF drive complete all as directed by Engineer-in-Charge. \n(Make: Yasakawa/BCH/Simens) | 1 | EACH | |
| 69 | 53 | S&F in repair VVVF drive of suitable capaciting for CT/LT motion of 5/10 Tonnene capacity EOT crane including replacement of old unserviciable VVVF drive complete all as directed by Engineer-in-Charge. \n(Make: Yasakawa/BCH/Simens) | 1 | EACH | |
| 70 | 54 | S&F power contactor of capacity 70 Amps, AC, 415 volts main contactor coil voltage 110 Volt with 2 NO + 2 NC, including taking down old unserviceable one.\nMake – BCH/Siemens/L&T | 3 | EACH | |
| 71 | 55 | S&F power contactor of capacity 40 Amps, AC – 03, 415 volts main contactor coil voltage 110 Volt type CE15FN3 including taking down old unserviceable one.\nMake – BCH/Hager/L&T | 2 | EACH | |
| 72 | 56 | S&F power contactor of capacity 32 Amps, AC – 03, 415 volts main contactor coil voltage 110 Volt type CE15FN3 including taking down old unserviceable one.\nMake – BCH/Hager/L&T | 3 | EACH | |
| 73 | 57 | S&F power contactor of capacity 12 Amps, AC – 03, 415 volts main contactor coil voltage 110 Volt type CE15CNC3 including taking down old unserviceable one.\nMake – BCH/Hager/L&T | 6 | EACH | |
| 74 | 58 | S&F power contactor of capacity 9.1 Amps, AC – 03, 415 volts main contactor coil voltage 110 Volt type CE15BNS3 including taking down old unserviceable one.Make – BCH/Hager/L&T | 12 | EACH | |
| 75 | 59 | S&F HRC Fuse holder bolted type fuse Link | 10 | EACH | |
| 76 | 60 | S&F bolted type HRC fuse Link | 10 | EACH | |
| 77 | 61 | S&F MCB TPN 63 Amps rating 415 volts 'C' Series 16 ka (Make Hager/Standard/indo Asian) | 2 | EACH | |
| 78 | 62 | S&F MCB TPN 40 Amps rating 415 volts 'c' Series 16 ka (Make Hager/Standard/indo Asian) | 4 | EACH | |
| 79 | 63 | S&F MCB TP 32 Amps rating 415 volts 'c' Series 16 ka (Make Hager/Standard/indo Asian) | 6 | EACH | |
| 80 | 64 | S&F MCB SP 10 Amps rating 240 volts 'c' Series 10 ka (Make Hager/Standard/indo Asian) | 6 | EACH | |
| 81 | 65 | M&L MCCB 4 Pole, current rating 32 Amp, breaking capacity 25kA at 415V,50Hz including connection and testing complete all as directed. | 1 | EACH | |
| 82 | 66 | S&F MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of TPN 12 way, 415 Volts double door fixed in wall including making good disturbed surfaces, complete all as directed by Engineer-in-Charge (Standard/C&S/Havells) | 2 | EACH | |
| 83 | 67 | M&L for preparation of surface by scrapping existing painted surface of 9 meter double graded EOT Crane and painting moter, gearbox,panel, gader applying one coat of synthetic enamel paint of existing colour by spray Machine including writing SM/MES No of Eot Crane 05/10 tonne all as directed by Engineer-in-charge. | 3 | EACH | |
| 84 | 68 | Drain out the Sewage sumps of capacity 6000/8000 glns and cleaning of sludges up to bottom level at sewage pump houses and taking out and depositing the sludge not more than 50 m ,including excavated earth and covered with earth and spreading bleaching powder all around as directed. | 11 | JOB | |
| 85 | 69 | Dismantling and taking down unservicible electric motor installed at Sewage pump house 3 phase 415 Volts, 15 HP capacity, disconnection of incoming electric connection from panel, stripping out burnt wiring, cleaning slots and rewinding the motor with super enameled copper wire as per existing size and gauge including insulating materials and varnishing, replacing worn out bearing as per existing size, reassembling the motor after rewinding and mounting on its original position including replacing the old unserviceable nuts, bolts and tested completed all as directed . | 2 | JOB | |
| 86 | 70 | All as per Item No.62 above but of capacity 7.5 HP | 3 | JOB | |
| 87 | 71 | All as per Item No.62 above but of capacity 5 HP | 1 | JOB | |
| 88 | 72 | Dismantling and taking down the electric motor of sewage pump set 15 HP capacity and transporting to work Shop and carrying out servicing/ maintenance of motor unit as per the following maintenance work:-\n(a) Opening of electric motor and cleaning/ removing dust from Armature and field coil\n(b) Cleaning of used/ old lubricated substance\n(c) Cleaning of starter and rotor unit\n(d) Checking and tightening of coupling, nuts, bolts and replacement of rubber insert.\n(e) Carrying out heat varnishing with varnish solution of best quality for field and armature coil and kept in heating chamber for 48 hrs for drying properly.\n(f) Replacement of oil worn out bearings.\n(g) Reassembling the complete motor and carrying out testing at work Shop and transporting back to installation and coupling with pumping set including necessary alignment, cable connection all as directed | 3 | JOB | |
| 89 | 73 | All as per Item No.62 above but of capacity 7.5 HP | 2 | JOB | |
| 90 | 74 | All as per Item No.62 above but of capacity 5 HP | 1 | JOB | |
| 91 | 75 | Disconnecting the suction and delivery pipe line and electric connections of centrifugal non clogging pump set of head-25 m, discharge-28 LPS, Model No-SP4L+BS Make-Kirlosker coupled with electric motor 15 HP, 3 Phase and removing it from its position carefully and transporting to the work shop and refixing the same in its original position after servicing including replacement of bushes , machining the pump shaft to suit in new bushes all as specified and as directed.Note : (i) Consumable stores like cotton waste/cleaning materials lubricants , gland packing metal filling , machining and transportation from site to work shop are deemed to be included in rate quoted. | 4 | JOB | |
| 92 | 76 | Disconnecting the suction and delivery pipe line and electric connections of centrifugal non clogging pump set of head-20-34 m, discharge-14 LPS, Model No-SP3 Make-Kirlosker coupled with electric motor 7.5 HP, 3 Phase and removing it from its position carefully and transporting to the work shop and refixing the same in its original position after servicing including replacement of bushes , machining the pump shaft to suit in new bushes all as specified and as directed.Note : (i) Consumable stores like cotton waste/cleaning materials lubricants , gland packing metal filling , machining and transportation from site to work shop are deemed to be included in rate quoted. | 4 | JOB | |
| 93 | 77 | Disconnecting the suction and delivery pipe line and electric connections of centrifugal non clogging pump set of head-20 m, discharge-10 LPS, Model No-SP3A Make-Kirlosker coupled with electric motor 5 HP, 3 Phase and removing it from its position carefully and transporting to the work shop and refixing the same in its original position after servicing including replacement of bushes , machining the pump shaft to suit in new bushes all as specified and as directed.Note : (i) Consumable stores like cotton waste/cleaning materials lubricants , gland packing metal filling , machining and transportation from site to work shop are deemed to be included in rate quoted. | 1 | JOB | |
| 94 | 78 | M&L for cleaning & Scraping of old painted surface of the pumps and motors 02 Nos of any capacity (05 hp to 15 hp) , LT panel boards, suction & delivery pipe lines and painted with two coats of synthetic super enamelled paint of desiered colour including marking the flow of waste water pipe lines complete specified and directed. | 4 | JOB | |
| 95 | 79 | M&L for structural steel work in,foundation frame of pump and moter as per existing size , stairs. Including cleats, brackets etc for replacement of UNSV parts complete including dismantling all as specified and directed. | 100 | KG | |
| 96 | 80 | M&L for cement concrete in foundations, filling and mass concrete type D2 1:4:8 using 40 mm grade stone aggregate | 1 | CUM | |
| 97 | 81 | M&L for cement concrete in copping type B1 1:2:4 using 20 mm graded stone aggregate | 0.5 | CUM | |
| 98 | 82 | M&L for rendering 10mm thick cement plaster on fair faces of concrete surfaces finished even and smooth (with out using extra cement) | 6 | SQM | |
| 99 | 83 | Supply and fix in repair CI sluice valve flanged of class PN 1.6 conforming to IS - 14846 complete with iron wheel head , SS/Gun metal spindle and check nut , including jointing material such as rubber insertion nuts, bolts and washers etc complete ,of following size : \nMake - Kirloskar/upadhaya/Leader/Zoloto or eqvlnt. | |||
| 100 | 83.01 | 80 mm dia bore pipe | 3 | EACH | |
| 101 | 83.02 | 100 mm dia bore pipe | 2 | EACH | |
| 102 | 83.03 | 150 mm dia bore pipe | 2 | EACH | |
| 103 | 84 | Labour only for taking out sluice valve any type and size including re- facing, re- grinding of shutter and re - fixing the same including providing rubber insertion sheet , gland packing rope , nuts , bolts and washers etc to make the sluice valve leak proof and free. operational all as specified and directed by Engr -in - charge for the following sizes .Note - :- Rate of rubber insertion sheet,nut,bolts,washers etc will deemed to be included in the item rate. | |||
| 104 | 84.01 | 80 mm dia bore | 2 | EACH | |
| 105 | 84.02 | 100 mm dia bore | 2 | EACH | |
| 106 | 84.03 | 150 mm dia bore | 2 | EACH | |
| 107 | 85 | Supply and fix in repair CI Non - Return Valves , ISI marked , heavy duty , flanged type including rubber sheet & nut bolts etc complete all as specified by the Engr-in-charge for the following sizes. Make - Kirloskar/Upadhaya/Leader/Zoloto or equivalent | |||
| 108 | 85.01 | 80 mm dia bore | 3 | EACH | |
| 109 | 85.02 | 100 mm dia bore | 3 | EACH | |
| 110 | 85.03 | 150 mm dia bore | 2 | EACH | |
| 111 | 86 | Supply and fix in repair 80 mm dia pipe foot valve as per IS-4038 of cast iron with brass diaphragm heavy duty screwing type complete of the following sizes .Make-Kirloskar/Kartar/Leader/Upadhaya | 5 | EACH | |
| 112 | 87 | Taking down the existing Unsrviceable LT Panel board, Supply , install , test and commissioning of factory made LT Panel board outdoor type of suitable size made out of CRCA sheet of 3mm thick with suitable size of angle iron frame duly painted with powder coating over a coat of red oxide primer all over with canopy totally enclosed weather, dust and vermin proof with front and rear openable doors with locking arrangement suitable for 3 phase 4 wire LT AC, 50 Hz, 415 Volts with suitable aluminium bus bar with lifting PCC foundation/platform as per manufacturer guide lines for installing the panel board complete for accommodating the following accessories. \n(a) MCCB 63 amps, four pole ,25 KA 01 No Make - Havells/ L&T/ Legrand or eqvlnt\n(b) MPCB suitable for 7.5HP/5.5 KW - 02 No Make- BCH/L&T/C&S or equivalent\n(c) Automatic Star Delta starter for 7.5 HP Non- Clogging centrifugal pump set - 02 No Make - L&T/Havells/Crompton Greaves \n(d) On load change over switch 63 Amps , 4 pole - 01 No Make - Havells/L&T/C&S or equivalent\n(e) LED Multi function meter - 01 No Make -Havells/L&T/C&S/AE or equivalent\n(f) CT 100/5 - 03 Nos Make -AE/Meco or equivalent\n(g) LED type Indicating lamp R, Y, B (set of 3) -01set make - Meco/AE/L&T/Conzerve.\n(h) Single phase preventor, Make-Minilac or equivalent \n(i) Necessary wiring including wiring material and copper strip. | 1 | JOB | |
| 113 | 88 | Excavation in trenches not exc 1.5 wide and not exc 1.5 mtr deep and getting out in soft soil for laying pipes complete all as specified . | 60.5 | CUM | |
| 114 | 89 | Returning and filling in soils , including spreading ,levelling ,watering and well ramming in layers not exc 25 cm thick complete all as specified . | 54.22 | CUM | |
| 115 | 90 | Removal of excavated material to a distance not exc 50 mtr away from starting point and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed | 6.28 | CUM | |
| 116 | 91 | Material and labour for cutting the existing concrete/bituminous road surface width not exceeding 30cm and making good the surface with 100mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate finished even and fair complete over 100mm thick PCC 1:4:8 type D2 using 40mm grade stone aggregate over consolidated/rammed earth surface all as specified and directed. | 7 | SQM | |
| 117 | 92 | Supply and laying of ductile iron (DI) pipe spigot and socket ends class 'K-9' of dia 100 mm suitable for tyton joint or any length properly laid in trenches all as specified and directed by Engr-In-Charge of following sizes:- (Make - Electro steel/Rashmi Metaliks/Tata or equivalent) Note: Old pipe are inside road and hardstanding, credit can not be obtained. | 121 | RM | |
| 118 | 93 | Supply and laying of ductile iron (DI) pipe spigot and socket ends class 'K-9' of dia 80 mm suitable for tyton joint or any length properly laid in trenches all as specified and directed by Engr-In-Charge of following sizes:- (Make - Electro steel/Rashmi Metaliks/Tata or equivalent) Note: Old pipe are inside road and hardstanding, credit can not be obtained. | 55 | RM | |
| 119 | 94 | Supply and fix DI fitting for spigot socketed pipe , bends ( any type, radius and angle ) tapers any type , (straight , bend increasing , decreasing or double socket etc ) tee pieces single branch , Y junction double branch , cross of size - up to 100 mm dia . | 90 | KG | |
| 120 | 95 | M&L Rubber gasket Joint (Tyton Joint) suitable for 100 mm DI pipe all as specified and directed. | 22 | EACH | |
| 121 | 96 | M&L Rubber gasket Joint (Tyton Joint) suitable for 80 mm DI pipe all as specified and directed. | 10 | EACH | |
| 122 | 97 | S&F star delta starter in SS enclosure 15 HP capacity, 11 KW, over load range 20 – 30 Amps suitable for 15 HP submersible/ Centrifugal pumping set including taking down old star delta starter.\n(Make – Havells cat part No – IHSASAPCW or equivalent of L&T/ Siemens) | 2 | EACH | |
| 123 | 98 | M & L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m depth below ground level) with top edge of the plate not less than 1.5 m below ground level connected to galvanised earth strip of size 32x6mm by mean of bolt, nuts, check nuts and washer of galvanised iron steel all as shown in electrical plate No 3 of SSR Part - I, connected earthing test point and testing on complete all as specified and directed\nNote :- Rate also include necessary excavation and earth work in any type of soil, PCC pit 1:3:6 type C2, CI cover, funnel with watering pipe GI pipe light grade20 mm, wire mess, GI Protection pipe 40mm dia medium grade, test point, connecting lead/strip from test point to main switch or eqipment to be connected | 6 | EACH | |
| 124 | 99 | Supply & fixing in replacement of earth continuity conductor GI strip 25X4 mm. | 50 | RM | |
| 125 | 100 | Cleaning of fire static tank of capacity 1,00,000 Gallons for fire fighting system by draining out the water and taking out the sludges from the bottom of the static water tank and cleaning mossy on walls of the tank and scraping by wire brush & brooms , reparing the erroded surface with cement plaster and applying two coats of white lime and writing the date of Cleaning on white paint over black painted surface complete all as specified and directed . | 6 | JOB | |
| 126 | 101 | All as per Item No .89 here-in-before but of capacity 75,000 Gallons. | 1 | JOB | |
| 127 | 102 | All as per Item No .89 here-in-before but of capacity 50,000 Gallons. | 2 | JOB | |
| 128 | 103 | All as per Item No .89 here- in- before but of capacity 20,000 Gallons. | 3 | JOB | |
| 129 | 104 | All as per Item No. 89 here- in- before but of capacity 10,000 Gallons. | 3 | JOB | |
| 130 | 105 | Dismantling and taking down unservicible electric motor of fire pump set assembly of 100 HP(75 KW) capacity 3 phase ,disconnection of incoming electric connection from panel, stripping out burnt wiring, cleaning slots and rewinding the motor with super enameled copper wire as per existing size and gauge including insulating materials and varnishing, replacing worn out bearing as per existing size, reassembling the motor after rewinding and mounting on its original position including replacing the old unserviceable nuts, bolts and tested completed all as directed . | 1 | JOB | |
| 131 | 106 | Dismantling and taking down the electric motor of fire pump set 100 HP capacity and transporting to work Shop and carrying out servicing/ maintenance of motor unit as per the following maintenance work:-\n(a) Opening of electric motor and cleaning/ removing dust from Armature and field coil\n(b) Cleaning of used/ old lubricated substance\n(c) Cleaning of starter and rotor unit\n(d) Checking and tightening of coupling, nuts, bolts and replacement of rubber insert.\n(e) Carrying out heat varnishing with varnish solution of best quality for field and armature coil.\n(f) Replacement of oil worn out bearings.\n(g) Reassembling the complete motor and carrying out testing at work Shop and transporting back to installation and coupling with pumping set including necessary alignment, cable connection all as directed.\n | 1 | JOB | |
| 132 | 107 | Disconnecting the suction and delivery pipe line and electric connections ofunserviceable centrifugal pump of head-90 m, discharge-180 cum per hour, Model No-DSM 100/36 Make-Kirlosker coupled with electric motor 100 HP, 3 Phase and removing it from its position carefully and transporting to the work shop and refixing the same in its original position after servicing including replacement of bushes , machining the pump shaft to suit in new bushes all as specified and as directed.Note : (i) Consumable stores like cotton waste/cleaning materials lubricants , gland packing metal filling , machining and transportation from site to work shop are deemed to be included in rate quoted | 1 | JOB | |
| 133 | 108 | Disconnecting the suction and delivery pipe line and electric connections of unserviceable centrifugal pump of head-75 m, discharge-8.3 Liter per sec,, Model No-DB 40/26 Make-Kirlosker coupled with electric motor 60 HP, 3 Phase and removing it from its position carefully and transporting to the work shop and refixing the same in its original position after servicing including replacement of bushes , machining the pump shaft to suit in new bushes all as specified and as directed.Note : (i) Consumable stores like cotton waste/cleaning materials lubricants , gland packing metal filling , machining and transportation from site to work shop are deemed to be included in rate quoted | 1 | JOB | |
| 134 | 109 | Disconnecting the suction and delivery pipe line and electric connections of unserviceable centrifugal pump of head-75 m, discharge-8.3 Liter per sec,, Model No-DB 40/26 Make-Kirlosker coupled with electric motor 20 HP, 3 Phase and removing it from its position carefully and transporting to the work shop and refixing the same in its original position after servicing including replacement of bushes , machining the pump shaft to suit in new bushes all as specified and as directed.Note : (i) Consumable stores like cotton waste/cleaning materials lubricants , gland packing metal filling , machining and transportation from site to work shop are deemed to be included in rate quote | 1 | JOB | |
| 135 | 110 | S&F on load change over switch 200 Amps 4 pole for open mount including taking down old change over switch all as directed.\n(Make – Havells/L&T/ C&S/ Standard ) | 1 | EACH | |
| 136 | 111 | S&F on load change over switch 100 Amps 4 pole in sheet metal enclosure including taking down old change over switch.\n(Make – Havells/L&T/ C&S/ Standard ) | 1 | EACH | |
| 137 | 112 | S&F switch fuse unit cubical type for panel mounted, open execution 3 pole and neutral 100 Amps, 415 Volts, 50 Hz AC supply alongwith HRC fuse complete all as directed including taking down old switch fuse unit.\n(Make – Havells/ standard/ Legrand). | 1 | EACH | |
| 138 | 113 | S&F switch fuse unit cubical type for panel mounted, open execution 3 pole and neutral 32 Amps, 415 Volts, 50 Hz AC supply alongwith HRC fuse complete all as directed including taking down old switch fuse unit.\n(Make – Havells/ standard/ Legrand). | 1 | EACH | |
| 139 | 114 | S&F of over load relay 18-25 amp,including taking down one all as directed.(Make – Havells/ standard/ L&T). | 1 | EACH | |
| 140 | 115 | S&F MS ERW pipe of 80 mm dia pipe at fire pump house with provision of necessary MS bend, MS flange etc, by cutting and welding and painting with two coats of synthetic enamel paint over a coat of primer and testing including taking down old MS pipe.\n(Make – Bansal/ Tata/ Jindal) | 18 | RM | |
| 141 | 116 | S&F MS ERW pipe of 100 mm dia pipe at fire pump house with provision of necessary MS bend, MS flange etc, by cutting and welding and painting with two coats of synthetic enamel paint over a coat of primer and testing including taking down old MS pipe.\n(Make – Bansal/ Tata/ Jindal) | 18 | RM | |
| 142 | 117 | S&F MS ERW pipe of 150 mm dia for suction pipe at fire pump house with provision of necessary MS bend, MS flange etc, by cutting and welding and painting with two coats of synthetic enamel paint over a coat of primer ant testing including taking down old MS pipe.(Make – Bansal/ Tata/ Jindal) | 24 | RM | |
| 143 | 118 | S&F in repair fire yard hydrant post 80 mm dia 1.5 meter height, maid of MS flanged type, complete all as specified and directed. | 2 | EACH | |
| 144 | 119 | S&F in repairs fire fighting GM landing valve (Hydrant valve single headed) with 75 mm NB flanged inlet brass spindle 63 mm dia female oblique outlet bearing all as specified and directed by Engineer – in – Charge.\n(Make – Zenith/ Jyoti/ Fire Shield). | 3 | EACH |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
