Periodical Maintenance Of Road From Sari To Halon Kalan Km Road Under ( Village Road ) Drrp-No . Vr043 Providing And Laying 20 Mm Thick Premix Carpet With Seal Coat At Km 0/0 To 1/00
Tender Value
7.24 Lakhs
Estimated cost
Bid Submission
26 Sep 2020
0 days left
EMD
14500
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisinghpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Maintenance Of Road From Sari To Halon Kalan Km Road Under ( Village Road ) Drrp-No . Vr043 Providing And Laying 20 Mm Thick Premix Carpet With Seal Coat At Km 0/0 To 1/00
BOQ
| Name of Work:-Periodical Maintenance of road from Sari to Halon Kalan Km Road under (Village road) DRRP-No. VR043 (SH:-Providing and laying 20 mm thick premix carpet with seal coat at Km 0/0 to 1/00) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing, laying, spreading and compacting stone aggregate size 53mm to 22.4mm ( fifty three millimeter to twenty two point four millimeter) Grading-III 75mm (seventy five millimetre) thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 K.N. static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2 mm (eleven point two millimetre) nominal size at the rate of 0.18 cyn (zero point eighteen cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications clause No. 405 including carriage of materials within all leads , lifts and other incidentals or as per the directiones of Engineer-In-Charge. The rate including of octroi, royality, GST, Malkana, toll tax, Sale tax or other taxes imposed by the Government. | 52.5 | Per Cubic metre | |
| 2 | 2 | Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @ 0.85 Kg. per Sqm. ( zero point eight five kilogram) per square metre using mechanical means as per M.O.R.D. technical specifications clause 502and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. | 3200 | Per square metre | |
| 3 | 3 | Providing and applying tack coat with Bitument emulsion (RS-I) using emulsion pressure distributor at the rate 0.225 kg (zero point two two five kilograme) per/ Square metre on the prepared Bituminious surface cleaned with hydraulic broom as per M.O.R.D. technical specifications section No. 503 or as per the entire satisfaction and direction of Engineer - in- Charge including carriage of materials within all leads, lifts and other incidentals. The rate including of octroi, royality, GST, Malkana, toll tax, Sale tax or other taxes imposed by the Government. | 3200 | Per square metre | |
| 4 | 4 | Providing, laying and rolling of open-graded premix carpet of 20 mm (Twenty milimetre) compacted thickness composed of Type-A 13.2 mm (Thirteen decimal two milimetre) to 5.6 mm (Five decimal six millimetre) aggregates at the rate of 0.27 Cum. ( Zero point two seven Cubicmetres) mixed with penetration grade V.G-10 (Viscosity grade-Ten) Bitumen at the rate 14.6 Kg. ( Fourteen point six Kilogram) per ten Square metres of road surface to required line, grade and level to serve as wearing course on a previously prepared base, including mixing and heating binder and aggregate in Hot mix Plant 30/40 ( Thirty / Forty) Tonne per hour capacity, transporting mixed material with tipper and laying with paver finisher to the required grade and camber and rolling with a three wheel 80-100 (Eighty - Hundred)KN static road roller, finished to required level and grades to be followed by seal coat as per MORD Technical Specification Clause 506 by mechanical means and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. (By Mechanical means). | 3200 | Per square metre | |
| 5 | 5 | Providing and laying seal coat for sealing the voids in a bituminous surface laid to specified level grade and cross fall using type-B manual means as per technical specification Clause 508 using Bitumen grade V.G. 10 (Viscosity grade- Ten) at the rate of 6.80 kg (Six point eight zero kilogram) premixed with 0.06 (Zero point Zero six) Cubic metre of fine aggregate per ten square meter heated in mini hot mix plant and laying of mixed material and rolling with power road roller 8 - 10 tonne (eight to ten) tonnes capacity and as per the directions of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. | 3200 | Per square metre |
AI Tender Summary
Tender Timeline
Sep 17, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 28, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender