Invitation Of Quotation Invitation Of Quotation For Fire Fighting Related Item

Sharing tender

Invitation Of Quotation Invitation Of Quotation For Fire Fighting Related Item-2 Fire Pump Room Equipment 3 Main Hydrant Pump 4 Supply, Erection, Testing & Commissioning Of Electrical Motor Driven Main Pump Of Vertical In Line , Type Multistage Multi Outlet And Capable To Deliver 2280 Lpm ( To Ensure A Minimum Pressure Of 3.5 Kg / Sqcm At The Farthest Or Topmost Hydrant ) . Fire Pump Shall Have C.I. Casing, Bronze Impeller ( Hard Finished And Dynamically Balanced ) And S.S. ( 304 ) Shaft With Mechanical Seal. The Installation Shall Be Complete With Necessary Pressure Gauge With Gun Metal Shut Off Cock On Delivery Side. ( The Pump Should Be Tested For Bench Mark At Factory And Shall Be Gotten Approved By The Local Fire Authority ) 137 M3 / Hr @ 88 M Head / 75 Hp 5 The Pump To Be Coupled To Squirrel Cage Induction Motor Of Capacity Of 75 Hp, Tefc Type Suitable For Operation On 415 Volts, 3 Phase 50 Hz A.C Supply, For The Above Pump With Synchronous Speed Of 2900 Rpm, Nconforming To Ip 55 Protection & Class F Insulation. The Motor Shall Conform To Is 325-1978 ( Up To Ndate ) And Complete Set Shall Mounted On Common Base Frame. The Quoted Rate Includes Providing & Fixing Of Coupling, Coupling Gaurd And Vibration Isolator, Flexible Couplings , Rcc Foundation ( As Recommended By Manufacturer ) And Foundation Bolts Etc. Pump Shall Be Capable Of Furnishing Not Less Than 150% Of Rated Capacity At A Head Of Not Less Than 65% Of The Rated Head. The Shut Off Head Shall Not Exceed 120% Of Rated Head. 6 Stand-By Pump ( Diesel Engine Driven Pump ) 7 Supply, Erection, Testing & Commissioning Of Diesel Engine Driven Main Pump Of Vertical In Line Type Multistage Multi Outlet And Capable To Deliver 2280Lpm ( To Ensure A Minimum Pressure Of 3.5 Kg / Sqcm At The Farthest Or Topmost Hydrant ) . Fire Pump Shall Have C.I. Casing, Bronze Impeller ( Hard Finished And Dynamically Balanced ) And S.S. ( 304 ) Shaft With Mechanical Seal. The Installation Shall Be Complete With Necessary Pressure Gauge With Gun Metal Shut Off Cock On Delivery Side. ( The Pump Should Be Tested For Bench Mark At Factory And Shall Be Gotten Approved By The Local Fire Authority ) . 137 M3 / Hr @ 88 M Head / 102 Bhp 8 The Pump To Be Coupled With Diesel Engine Capacity Of 102 Bhp As Per Is :12469 Specification With En8 Shaft And Ss410 Shaft Sleeve Coupled With Diesel Engine ( Radiator / Heat Exchanger Cooled ) Provide On Common Base Plate Including Fuel Tank, Diesel Engine Controller, Battery With Battery Charger, Muffler, Silencer, Coupling Guard, Foundation Bolts Etc.As Per The Statutory Requirement. 9 Jockey Pump 10 Supply, Erection, Testing & Commissioning Of Electrical Motor Driven Centrifugal Jockey Pump Suitable For Operation At 415 Volts ± 6%, 3 Phase, 50 Hz A.C Supply. The Installation Shall Be Complete With Flexible Coupling And Coupling Guard, Complete As Required. Jockey Pump Shall Be Of Stainless Steel Construction.The Pump Head And Base Shall Be Ci Gg20 Construction And Impellers, Diffusers, Shaft Sleeve, Seal Bush & Pump Shaft Shall Be In Ss 304 Material. The Pump Shall Be Provided With Mechanical Seal The System Shall Be Complete With Necessary Pressure Gauge With Gun Metal Shut Off Cock On Delivery Side ( The Pump Should Meet The Condition And Shall Be Gotten Approved By The Local Fire Authority ) . Capable To Deliver180lpm At 95M & 140M.The Pump Shall Be Coupled To Tefc Motor Of Suitable Hp With Speed Of 2900Rpm . The Quoted Rate Shall Includes Providing & Fixing Of Coupling, Vibration Isolator , Flexible Couplings Coupling Guard, Rcc Foundation ( As Recommended By Manufacturer ) And Foundation Bolts Etc. 11 15 Hp 12 7.5 Hp 13 Terrace Pump 14 Supplying, Installing, Testing And Commissioning Of Electrical Driven Terrace Pupm Suitable For Automatic Operation And Consisting Of Following, Complete In All Respect, As Required ( Terrace Pump ) Na ) Horizontal Type, Multistage, Centrifugal, Split Casing Pump Of Cast Iron Body & Bronze Impeller With Stainless Steel Shaft, Mechinical Confirming To Is: 1520 Nb ) Suitable Hp Squirell Cage Induction Motor Tefc Type Suitable For Operation On 415 Volts, 3 Phase, 50 Hz, Ac Supply With Ip55 Class Of Operation For Enclosure, Horizontal Foot Mounted Type With Class-F Insullation, Confirming To Is-325. Nc ) M.S. Fabricated Common Base Plate, Coupling, Coupling Gurad, Foundation Bolts Etc. As Required Nd ) Suitable Cement Concrete Foundation Duly Plastered And With Anti Vibration Pads. 15 15 Hp 16 7.5 Hp 17 Pressure Transmitter ( Control Sensor ) 18 Supply, Installation, Testing & Commissioning Of Pressure Switches Of Suitable Range For Pump Sets With Fittings Like Unions / Collars / Reducers Etc. N 19 Pressure Gauges 20 Supply, Installation, Testing & Commissioning Of Pressure Gauges Of Suitable Range For Pump Sets And Pipe Lines With Siphon, Fittings Like Unions / Collars / Reducers Etc. Glycerine Filled Pressure Gauges To Use On Pump Discharge Lines. N 21 Butterfly Valve 22 Supply, Installation, Testing & Commissioning Of Butterfly Valves As Per Bs 5155 Slim Seal Standard Lever Operated Type With Required Flanges, Nuts, Bolts Etc. Complete. N 23 200 Mm 24 150 Mm 25 100 Mm 26 80 Mm 27 50 Mm 28 Gate Valve 29 Supply, Installation, Testing & Commissioning Of Gate Valve With Flanges, Nut, Bolts & Washers, Painting Etc. Complete As Required. N 30 200 Mm Nominal Dia 31 150 Mm Nominal Dia 32 100 Mm Nominal Dia 33 80 Mm Nominal Dia 34 65 Mm Nominal Dia 35 Foot Valve ( Suction ) 36 Supplying, Installing, Testing And Commissioning Of Foot Valves With Required Flanges, Nuts, Bolts And Gaskets Etc. Complete. N 37 125 Mm Nominal Dia 38 80 Mm Nominal Dia 39 65 Mm Nominal Dia 40 Non Return Valve 41 Supplying, Installing, Testing And Commissioning Of Non-Return Valves As Per Is:5312 Swing Check Type With Required Flanges, Nuts, Bolts And Gaskets Etc. Complete. N 42 200 Mm Nominal Dia 43 150 Mm Nominal Dia 44 100 Mm Nominal Dia 45 80 Mm Nominal Dia 46 65 Mm Nominal Dia 47 Y Type Pn10 Strainer With Flange And Fittings 48 200 Mm Nominal Dia 49 150 Mm Nominal Dia 50 100 Mm Nominal Dia 51 80 Mm Nominal Dia 52 65 Mm Nominal Dia 53 Ball Valve 54 Supplying, Installing, Testing And Commissioning Of Forged Brass Ball Valves With Fittings Of Screwedend Type. N 55 25 Mm Dia 56 Internal Hydrant System 57 Yard Hydrant / Landing Valve 58 Supplying, Installing, Testing And Commissioning Of Yard Hydrant Comprising Of The Following.All The Hydrant Accessories Shall Be Given Serial Number For Identification, Numbers Hall Be Written In The White Paint 59 Single Headed Hydrant Valve As Per Is 5290, Made Of S.S. With 63 Mm Dia Instantaneous Out & 80 Mm Dia Fanged Inlet Inlet, Blank Cap , Chain And Hand Wheel Etc Complete. With Orifice Plate ( Ss304 6Mm Thk ) As Required To Minimize The Pressure At Discharg. N 60 15 M Long, 63Mm Dia Rrl Hose With Instantaneous Couplings And Hoses Shall Be Stored In Side The Hose Cabinet With Bracket And Required Accessories. N 61 Stainless Steel Short Branch Pipe Of 63 Mm Dia. With Nozzle. N 62 Hose Reel Drum Of Swinging Type With 19Mm Dia Rubber Braided Hose Of 30 M. Length And Shut Off Nozzle, Complete. N 63 Sluice Valve 64 150 Mm 65 80 Mm 66 Nrv 80 Mm 67 Supplying , Installing And Commissioning Of Fire Brigade Inlet Connection Of 4 Way With 4 Nos. 63Mm Dia Built In Gun Metal Non Return Valves Instantaneous Coupling Type Arranged On 150Mm Dia. Pipe Manifold And Connected To Fire 68 Supplying , Installing And Commissioning Of Fire Brigade Inlet Connection Of 2 Way With 4 Nos. 63Mm Dia Built In Gun Metal Non Return Valves Instantaneous Coupling Type Arranged On 150Mm Dia. Pipe Manifold And Connected To Fire 69 Pipe 70 Supplying, Installing, Testing And Commissioning Of C Class M.S Pipes Of To Confirm Is 1239 Upto Dia 150Mm Malleable Specials Extruded Type, Such As Reducers, Elbows, Tees, Flanges Etc... And Necessary Puddle Flanges For Tanks. The Pipes Shall Be Painted, After Total Removal Of Rust, With One Coat Each Of Epoxy Primer & Paint ( Red ) Using Approved Type, Galvanized, Supports At Standard Spacing, Anchor Fasteners, Bolts, Nuts, Clamps, Rails U & Threaded Bolt, Including Cutting, Welding, Fixing In / On Walls, Floors & Ceiling By Using The Supports Etc, As Per Drawings. The Quoted Rate Shall Also Include For Chasing / Chipping Walls, Making Holes In Walls / Floor And Making Them Good With Non Shrink Filler Material / Rcc / Blocks As Required And Finished In Cement Mortar Etc. Complete. ( Above Ground Piping ) N 71 200Mm Nominal Dia 72 150Mm Nominal Dia 73 100Mm Nominal Dia 74 80Mm Nominal Dia 75 65 Mm Nominal Dia 76 50 Mm Nominal Dia 77 25 Mm Nominal Dia 78 Supplying, Installing, Testing And Commissioning Of C Class M.S Pipes Of To Confirm Is 1239 Upto Dia 150Mm Malleable Specials Extruded Type, Such As Reducers, Elbows, Tees, Flanges Etc... And Necessary Puddle Flanges For Tanks. The Pipes Shall Be Painted, After Total Removal Of Rust, With One Coat Each Of Epoxy Primer & Paint ( Red ) Using Approved Type, Galvanized, Supports At Standard Spacing, Anchor Fasteners, Bolts, Nuts, Clamps, Rails U & Threaded Bolt, Including Cutting, Welding, Fixing In / On Walls, Floors & Ceiling By Using The Supports Etc, As Per Drawings. The Quoted Rate Shall Also Include For Chasing / Chipping Walls, Making Holes In Walls / Floor And Making Them Good With Non Shrink Filler Material / Rcc / Blocks As Required And Finished In Cement Mortar Etc. Complete. ( Under Ground Piping ) N 79 200Mm Nominal Dia 80 150Mm Nominal Dia 81 100Mm Nominal Dia 82 80Mm Nominal Dia 83 65 Mm Nominal Dia 84 Excavation And Refilling With Soil Of Ground For Underlaying Of 6 Pipe For Peripheral Ring Of Hydrant By Wrapping And Coating Of Black Sheet 85 Fire Alarm & Smoke Detection System 86 Supply, Installation, Testing & Commissioning Of Micro Controller Based Control System 24 Zone Based With Zone & Sounder Enable / Disable Features Through Key Pad. Rtc, Event Logging With Date & Time. Fully Networkable Rs 485 Based Communication Panel For Repeater And Fully Programmable Via Integral Keypad And Other Specification As Described In Catalogue. ( As Per Isimarked ) N 87 Supply, Installation, Testing & Commissioning Of Conventional Type Manual Call Point ( Press Type ) With Micro Switch Systems. 88 Supply, Installation, Testing & Commissioning Of Conventional Type Hooter With Red Colour Ms Body & Speaker Unit. 89 Supply, Installation, Testing & Commissioning Of 6 Watt 3 Dia Ceiling Recessed Smoke Detection Censors With Fire Proof Cover Complete With Necessary Mounting Hardware, With All Required Accessories Etc. 90 Supply And Installaion Of 120 Mtr Range Beam Detector Of Conventional Type 91 Supply, Installation, Testing & Commissioning Of Battery Back Up System 92 Electrical & Electronic Works For Fire Fighting 93 Cables / Wire 94 Supply, Installation, Testing & Commissioning Of Frls, Pvc Outer Sheated, Steel Armoured, Aluminium Conductor, 1100V Grade Power Cables With Glands Etc.T 95 Supplying & Installation Of Alluminium Armoured Cable Of 75 Mm2 X 4 Core For Supplying The Input In Electrical Control Panel From Main Electrical Panel 96 Supplying & Erecting Control Power Cable For All Three Pumps To Composite Fire Panel ( 13 Mtr Each ) 97 Supplying & Erecting Control Power Cable For Booster Pump To Composite Fire Pane 98 Supplying & Erecting Mains With Frls 3C X 1.5Sq.Mm Copper Pvc Insulated Armoured Cable Laid In Provided Conduit / Trunking Or Any Other Places ( For Fire Alarm & Pa System ) . 99 Providing And Fixing Angle Iron ( 40 Mm X 40 Mm X 5 Mm ) Ms Door Frame 900X2100 Door Capable Of Accommodating Fire Hose Reel, Landing Valve, Hose Pipes, Fittings & Accessories. The Door Shall Have A Front Glass With Lock And Key Arrangement & Shall Be Painted With Post Office Red Colour ( Approval Shall Be Taken On The Basis Of Submitted Sample Before Ordering ) Cost Of Fire Extinguishers Not Included In Item Rate. ( Liasioing With Civil Contractor For Making 900X600x2100 Recessed Type Mansoary Box ( By Civil Contractor ) . Indoor Cabinet By 16 Gauge Ms Sheet. 100 Size 750 X 600 X 250 ( Outdoor Cabinet For Yard Hydrand ) 101 Size 700 X 600 X 400 102 Size 1500 X 900 X 600 103 Tac Approved 1.6Mm Thick M.S. Fire Hose Cabinet ( 750X600x250mm ) Made Out Of 16 Gauge M.S. Sheet Capable Of Accommodating Landing Valve, Hose Pipes, Fittings & Accessories. The Box Shall Have A Front Glass Door With Lock And Key Arrangement & Shall Be Painted With Post Office Red Colour ( Approval Shall Be Taken On The Basis Of Submitted Sample Before Ordering ) - For External And Roof Hydrant ( Outdoor Cabinet For Yard Hydrant ) By 16 Gauge Ms Sheet 104 63Mm Dia Single Outlet Gm Landing Valve Is Marked With Suitable Size Bolts, Nuts, Washers And Gaskets. Landing Valve Shall Be Tac Approved Make. 105 63Mm Dia Twin Outlet Gm Landing Valve Is Marked With Suitable Size Bolts, Nuts, Washers And Gaskets. Landing Valve Shall Be Tac Approved Make. 106 First Aid Hose Reel With 25 Mm Dia, 30 M Long Rubber Hose, Ball Valve, Piping And Gm Nozzle 107 63Mm Reinforced Rubber Hoses ( Rrl ) With Male And Female Gm Coupling, Is Marked- 15 M Long 108 Standard Short Size Gm Branch Pipe With Nozzle Of 20Mm Nomnal Bor Outlet With Instaneous Type 63 Mm Dia Coupling Complete Is Marked & Tac Approved. 109 Fire Axe 110 Supply, Installation, Testing And Commissioning Ss Orifice Plates In Pipelines To Reduce Pressure From 8 Kg. To 3.5 Kg / Sq.Cm. 111 Providing, Installing, Testing & Commisioning Of Fire Brigade Inlet Connection ( Fire Department Connection ) Consisting Of 4 Nos. 63 Mm Dia Instantaneous Inlet Arranged On A 50 Mm Dia Header, 1 No. 150 Mm Diameter Butterfly Valve, 1 No. 150Mm Dia. Non-Return Valve And Wall Mounted Box Of M.S. Construction With Glass Door To House The Above Mentioned Components. 112 Providing, Installing, Testing & Commisioning Of Fire Brigade Draw Out Connection ( Fire Department Connection ) With Suction Pipe Ms Class C 100 Mm Dia. & 100 Mm Dia. Foot Valve & Steel Chain Including Wall Mounted Box M.S. Construction With Glass Door To House The Above Mentioned Componenets. 113 Sitc Of Sprnkler Flexible Pipe ( Ul Listed ) Of Stailness Steel Conplete With 15 Npt On Reducer Thread With Maximum Working Pressure Of 175 Psi Test Pressure Of 875 Psi ( Brust ) With Branch Line ( Inlet ) 25Mm Npt Male Thread To Sprnkler Head ( Outlet ) 15 Mm Npt Female Thread With Reducer, Nipple, 2 Side Brackets, Center Bracket, Stocker Of Following Size 114 1000 Mm 115 1500 Mm 116 Providing, Fixing, Testing & Commissioning Of 15 Mm Dia Quartzoid Bulb Type Sprinklers Of Rating 68 Degree Centigrade With Required Accessories ( Pentand Type )