Meham Cooperative Sugar Mills Limited has published Supply Of Hardware Material. Submission Date for this Tender is 24-09-2020. Cutting Crimping and Punching Tools Tenders in Meham co-op sugar Mills Ltd Haryana. Bidders can get complete Tender details and download the document.
Name of Work: Hardware Items | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Hardware Items | |||
2 | 1.001 | Cotton waste white (threaded) | 1 | 800 | kg. |
3 | 1.002 | Araldite (1 kg pack) | 2 | 12 | pack. |
4 | 1.003 | Emery cloth (Rough), Carborandum | 3 | 1000 | Nos. |
5 | 1.004 | Emery cloth (Fine), Carborandum | 4 | 650 | Nos. |
6 | 1.005 | Emery Tape Rough, Carborandum | 5 | 350 | Meter. |
7 | 1.006 | Emery Tape Fine, Carborandum | 6 | 300 | Meter. |
8 | 1.007 | Emery Paste Fine (400 gm pack), Carborandum | 7 | 3 | pack. |
9 | 1.008 | Painting Brush Nylon Size – 4”, Raj/ Local | 8 | 50 | Nos. |
10 | 1.009 | Painting Brush Nylon Size – 1”, Raj/ Local | 9 | 10 | Nos. |
11 | 1.01 | M Seal | 10 | 120 | kg. |
12 | 1.011 | Old Dhoti 5 Meter | 11 | 220 | Nos. |
13 | 1.012 | Hack Saw Blade ½” x 12”, Miranda | 12 | 300 | Nos. |
14 | 1.013 | Teflon Tape, Champion | 13 | 145 | Roll |
15 | 1.014 | Teflon Rod 40 mm x 300 mm | 14 | 1 | No. |
16 | 1.015 | Teflon Rod 30 mm x 300 mm | 15 | 2 | Nos. |
17 | 1.016 | Teflon Rod 50 mm x 300 mm | 16 | 1 | No. |
18 | 1.017 | Restolene - 400 gm. | 17 | 50 | Pcs. |
19 | 1.018 | Blue Tube | 18 | 37 | Nos. |
20 | 1.019 | Lead Wire 3 mm | 19 | 1 | kg. |
21 | 1.02 | Lead Wire 1 mm | 20 | 0.5 | kg. |
22 | 1.021 | Anabond 666 | 21 | 5 | Tubes. |
23 | 1.022 | Stage B Jointing Paste, Type – B, Red,\nComplies to BS6956 Part 5:1992, Temp. Resistance = -400C to 6500C\n | 22 | 3 | pack. |
24 | 1.023 | Metallic Hose pipe ½” x 600 mm BSP | 23 | 13 | Nos. |
25 | 1.024 | Metallic Hose pipe ½” x 1000 mm BSP | 24 | 9 | Nos. |
26 | 1.025 | Metallic Hose pipe ½” x 2000 mm BSP | 25 | 10 | Nos. |
27 | 1.026 | Metallic Hose pipe 1/4” x 1000 mm BSP | 26 | 20 | Nos. |
28 | 1.027 | Plumber Block S-618, Friend | 27 | 2 | Nos. |
29 | 1.028 | MS Nipple ‘C’ class size – 3/8”x4” both end threaded. | 28 | 30 | Nos. |
30 | 1.029 | MS Long bend 3*8” threaded at both ends. | 29 | 30 | Nos. |
31 | 1.03 | MS Nipple ‘C’ class size – 1/2”x4” both end threaded. | 30 | 50 | Nos. |
32 | 1.031 | MS Long bends ½” outside threaded at both ends. | 31 | 100 | Nos. |
33 | 1.032 | MS Connector ½” BSP | 32 | 24 | Nos. |
34 | 1.033 | MS Socket ¼” BSP | 33 | 24 | Nos. |
35 | 1.034 | MS Socket ½” BSP | 34 | 75 | Nos. |
36 | 1.035 | Angle Grinder wheel dia 100 mm x 16 mm | 35 | 100 | Nos. |
37 | 1.036 | Cutting wheel 100 mm x 16 mm | 36 | 10 | Nos. |
38 | 1.037 | Aloxide Emery disc 180 x 23 mm fine (1 pkt. = 10 Pcs.) | 37 | 4 | Pkt. |
39 | 1.038 | Rubber Hose pipe ¾” | 38 | 250 | Meter. |
40 | 1.039 | Screw clamp for hose pipe 1.½” | 39 | 200 | Nos. |
41 | 1.04 | Screw clamp for hose pipe 1” | 40 | 50 | Nos. |
42 | 1.041 | Flexible hose pipe 3/8” BSP x 2 meter having double end female connector, working pressure – 180 bar., Euroflex/ Pix | 41 | 6 | Nos. |
43 | 1.042 | Brass counter sunk bolt M16 x 30 having drilled center hole drill size – 1/8” | 42 | 50 | Nos. |
44 | 1.043 | Forged steel U clamp for steel wire rope ¾” | 43 | 50 | Nos. |
45 | 1.044 | Mechanics Bench vice size 150 mm (Jaw width) | 44 | 1 | No. |
46 | 1.045 | Polisher (Angle Grinder) GWS21U Professional, BOSCH. | 45 | 1 | No. |
47 | 1.046 | Roller chain sprocket simplex pitch 2.0”, No. of teeth - 18 | 46 | 2 | Nos. |
48 | 1.047 | Roller chain lock pitch 2.0” | 47 | 2 | Nos. |
49 | 1.048 | Copper sheet 1/8” thk. | 48 | 50 | kg. |
50 | 1.049 | Grease Gun 5 kg with 6 feet long hose & nipples. | 49 | 1 | No. |
51 | 1.05 | Transparent sheet white 10 mm thick, size – 15” x 6’ | 50 | 2 | Nos. |
52 | 1.051 | Double ended open jaw spanners metric mm – 12 x 13, Taparia/ Jhalani | 51 | 2 | Nos. |
53 | 1.052 | Double ended open jaw spanners English ww – 7/8” x 1”, Taparia/ Jhalani | 52 | 2 | Nos. |
54 | 1.053 | Deep offset Bihexagonal Ring spanners, Metric mm – 12 x 13, Taparia/ Jhalani | 53 | 2 | Nos. |
55 | 1.054 | Deep offset Bihexagonal Ring spanners, English ww – 7/8” x 1”, Taparia/ Jhalani | 54 | 2 | Nos. |
56 | 1.055 | Heavy duty pipe wrench as per IS:4003 (part-II) – 1986, size – 8”, Taparia/ Jhalani | 55 | 2 | Nos. |
57 | 1.056 | Heavy duty pipe wrench as per IS:4003 (part-II) – 1986, size – 12”, Taparia/ Jhalani | 56 | 2 | Nos. |
58 | 1.057 | Heavy duty pipe wrench as per IS:4003 (part-II) – 1986, size – 36”, Taparia/ Jhalani | 57 | 1 | No. |
59 | 1.058 | Screw Driver – 12”, Taparia/ Jhalani | 58 | 1 | Nos. |
60 | 1.059 | Hacksaw Frame – 12”, Taparia/ Jhalani | 59 | 2 | Nos. |
61 | 1.06 | Rubber tyre coupling Px-60 complete set., Rathee | 60 | 3 | set. |
62 | 1.061 | Rubber tyre coupling Px-90 complete set., Rathee | 61 | 1 | set. |
63 | 1.062 | Rubber tyre coupling Px-110 complete set., Rathee | 62 | 1 | set. |
64 | 1.063 | Rubber tyre coupling Px-120 complete set., Rathee | 63 | 5 | set. |
65 | 1.064 | Rubber tyre coupling Px-140 complete set., Rathee | 64 | 2 | set. |
66 | 1.065 | Love joy coupling CW-276 complete set., Rathee | 65 | 1 | set. |
67 | 1.066 | MS sheet 2 mm thick size 1500 x 1700 mm - 4 Nos. | 66 | 165 | kg. |
68 | 1.067 | MS sheet 3 mm thick size 1250 x 3000 mm - 4 Nos. | 67 | 360 | kg. |
69 | 1.068 | MS Round En – 24, dia – 32 mm | 68 | 80 | kg. |
70 | 1.069 | High carbon steel (spring steel) flat size – 63 x 10 mm | 69 | 2000 | kg. |
71 | 1.07 | High carbon steel (spring steel) flat size – 38 x 6 mm | 70 | 150 | kg. |
72 | 1.071 | High Carbon steel Sq. bar 2” | 71 | 1200 | kg. |
73 | 1.072 | MS Flat 100 x 16 mm thk. | 72 | 350 | kg. |
74 | 1.073 | MS Flat 25 mm x 5 mm thk. | 73 | 50 | kg. |
75 | 1.074 | CI pulley for NK-1100, Length 220 mm, thickness 235 mm, Bore 70mm, type-C, No. of groove 08 | 74 | 1 | No. |
76 | 1.075 | CI pulley for NK-1100, Length 220 mm, thickness 330 mm, Bore 65mm, type-C, No. of groove 08 | 75 | 1 | No. |
77 | 1.076 | V- Belt Pulley 6”, C Groove, No. of groove =03 | 76 | 4 | Nos. |
78 | 1.077 | V- Belt Pulley 5”, B Groove, No. of groove =02 | 77 | 3 | Nos. |
79 | 1.078 | V- Belt Pulley length 130 mm thickness 70mm, bore 38mm, type B No. of groove =03 | 78 | 2 | Nos. |
80 | 1.079 | V- Belt Pulley length 155 mm thickness 100mm, bore 38mm, type B No. of groove =03 | 79 | 2 | Nos. |
81 | 1.08 | C.I. bush coupling 12” | 80 | 1 | No. |
82 | 1.081 | C.I. Pulley, OD-300 mm, ID- 60 mm, thick.80mm, Key way 18x16, C Groove | 81 | 2 | Nos. |
83 | 1.082 | C.I. Pulley, OD-260 mm, ID- 60 mm, thick.80mm, Key way 18x16, C Groove | 82 | 2 | Nos. |
84 | 1.083 | Slide wrench 12”, Taparia | 83 | 2 | Nos. |
85 | 1.084 | Slide wrench 6”, Taparia | 84 | 2 | Nos. |
86 | 1.085 | Pipe wrench 12”, Taparia | 85 | 2 | Nos. |
87 | 1.086 | Pipe wrench 18”, Taparia | 86 | 2 | Nos. |
88 | 1.087 | Measuring Tape 5 meter | 87 | 5 | Nos. |
89 | 1.088 | Steel rule 12” | 88 | 4 | Nos. |
90 | 1.089 | Oil cane 500 ml | 89 | 5 | Nos. |
91 | 1.09 | Revolving center MT - 2 | 90 | 2 | Nos. |
92 | 1.091 | Revolving center MT - 5 | 91 | 2 | Nos. |
93 | 1.092 | Drill Chuck MT-2 | 92 | 2 | Nos. |
94 | 1.093 | Drill Socket Set MT 2,3 to 5 | 93 | 2 | set. |
95 | 1.094 | Thread Gauge set, mm & inches | 94 | 4 | set. |
96 | 1.095 | Grinding wheel Green, Fine – 50 x 38 x 255 mm, SA60J, Carborandum | 95 | 1 | No. |
97 | 1.096 | Grinding wheel Black, rough – 50 x 38 x 255 mm, SA60J, Carborandum | 96 | 1 | No. |
98 | 1.097 | Grinding wheel Green, Fine – 50 x 50 x 255 mm, SA60J, Carborandum | 97 | 2 | Nos. |
99 | 1.098 | Grinding wheel Black, Rough – 50 x 50 x 255 mm, SA60J, Carborandum | 98 | 2 | Nos. |
100 | 1.099 | Cutting wheel 3 mm thick x 300 mm OD x 25.4 mm bore, Performer | 99 | 20 | Nos. |
101 | 1.1 | Compass screw type – 6”, Miranda/ sharp | 100 | 4 | set. |
102 | 1.101 | HSS tool bit – ½”x6”, S-400, Miranda | 101 | 20 | Nos. |
103 | 1.102 | HSS tool bit – 3/8”x6”, S-400, Miranda | 102 | 10 | Nos. |
104 | 1.103 | HSS tool bit – 1/4”x6”, S-400, Miranda | 103 | 10 | Nos. |
105 | 1.104 | HSS tool bit – 1”x8”, S-400, Miranda | 104 | 2 | Nos. |
106 | 1.105 | HSS tool bit – 5/8”x6”, S-400, Miranda | 105 | 8 | Nos. |
107 | 1.106 | Carbide tip – 1.1/4”, thick – 10 mm, V shape, TH20 | 106 | 10 | Nos. |
108 | 1.107 | Die Set – ½” BSW, JK | 107 | 2 | set. |
109 | 1.108 | Die Set – 5/8” BSW, JK | 108 | 2 | set. |
110 | 1.109 | Die Set – 16 mm, JK | 109 | 2 | set. |
111 | 1.11 | Brass round rod – 32 mm | 110 | 50 | kg. |
112 | 1.111 | Brass round rod – 38 mm | 111 | 50 | kg. |
113 | 1.112 | Brass Breezing Rod – 4 mm | 112 | 30 | kg. |
114 | 1.113 | En-8 Round Rod – 100 mm | 113 | 200 | kg. |
115 | 1.114 | En-8 Round Rod – 80 mm | 114 | 100 | kg. |
116 | 1.115 | En-8 Round Rod – 75 mm | 115 | 100 | kg. |
117 | 1.116 | En-8 Round Rod – 65 mm | 116 | 100 | kg. |
118 | 1.117 | En-8 Round Rod – 57 mm | 117 | 100 | kg. |
119 | 1.118 | En-8 Round Rod – 50 mm | 118 | 200 | kg. |
120 | 1.119 | En-8 Round Rod – 45 mm | 119 | 100 | kg. |
121 | 1.12 | En-8 Round Rod – 38 mm | 120 | 200 | kg. |
122 | 1.121 | En-8 Round Rod – 32 mm | 121 | 100 | kg. |
123 | 1.122 | En-8 Round Rod – 25 mm | 122 | 200 | kg. |
124 | 1.123 | En-8 Round Rod – 22 mm | 123 | 50 | kg. |
125 | 1.124 | En-8 Round Rod – 19 mm | 124 | 100 | kg. |
126 | 1.125 | En-8 Round Rod – 16 mm | 125 | 50 | kg. |
127 | 1.126 | En-8 Round Rod – 12 mm | 126 | 100 | kg. |
128 | 1.127 | MS Bend – 12” Short, Thickness – 9.5 mm | 127 | 4 | Nos. |
129 | 1.128 | MS Bend – 10” Short, Thickness – 8 mm | 128 | 6 | Nos. |
130 | 1.129 | MS Bend – 8” Short, Thickness – 8 mm | 129 | 8 | Nos. |
131 | 1.13 | MS Bend Class C – 6”, Short, Thickness – 8 mm | 130 | 41 | Nos. |
132 | 1.131 | MS Bend Class C – 5”, Short, Thickness – 8 mm | 131 | 5 | Nos. |
133 | 1.132 | MS Bend Class C – 4”, Short, Thickness – 6 mm | 132 | 30 | Nos. |
134 | 1.133 | MS Bend Class C – 3”, Short, Thickness – 6 mm | 133 | 20 | Nos. |
135 | 1.134 | MS Bend Class C – 3”, Long, Thickness – 6 mm | 134 | 10 | Nos. |
136 | 1.135 | MS Bend Class C – 2”, Short, Thickness – 6 mm | 135 | 30 | nos. |
137 | 1.136 | MS Bend Class C – 2”, Long, Thickness – 6 mm | 136 | 10 | Nos. |
138 | 1.137 | MS Bend Class C – 1”, Short, Thickness – 8 mm | 137 | 30 | Nos. |
139 | 1.138 | MS Bend Class C – 3/4”, Short, Thickness – 4 mm | 138 | 20 | Nos. |
140 | 1.139 | MS Flange as per table D – ½”, Thickness – 8 mm | 139 | 5 | Nos. |
141 | 1.14 | MS Flange as per table D – 3/4”, Thickness – 8 mm | 140 | 7 | Nos. |
142 | 1.141 | MS Flange as per table D – 1”, Thickness – 8 mm | 141 | 5 | Nos. |
143 | 1.142 | MS Flange as per table D – 2”, Thickness – 10 mm | 142 | 20 | Nos. |
144 | 1.143 | MS Flange as per table D – 3”, Thickness – 10 mm | 143 | 30 | Nos. |
145 | 1.144 | MS Flange as per table D –4”, Thickness – 12 mm | 144 | 30 | Nos. |
146 | 1.145 | MS Flange as per table D – 5”, Thickness – 12 mm | 145 | 15 | Nos. |
147 | 1.146 | MS Flange as per table D – 10”, Thickness – 12 mm | 146 | 8 | Nos. |
148 | 1.147 | MS Flange as per table D – 12”, Thickness – 16 mm | 147 | 8 | Nos. |
149 | 1.148 | Painting Brush – 4” | 148 | 20 | Nos. |
150 | 1.149 | Painting Brush – 3” | 149 | 20 | Nos. |
151 | 1.15 | Toghned Glass, Thick – 15 mm, Dia – 200 mm | 150 | 16 | Nos. |
152 | 1.151 | Plain Glass for messcuite grain testing size – 3” x 3”, Thick – 5 mm | 151 | 40 | Nos. |
153 | 1.152 | Rubber Hose pipe – ¾” | 152 | 100 | Meter. |
154 | 1.153 | Rubber Hose pipe – 1” | 153 | 200 | Meter. |
155 | 1.154 | Foundary wire Brush with handle – 6” | 154 | 150 | Nos. |
156 | 1.155 | Sugar Bag Carrying Trolley, medium size wheel – 23.5 cm | 155 | 6 | Nos. |
157 | 1.156 | Trolley wheel, polymer base material, size – 23.5 cm | 156 | 55 | Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail