Kerala State Nirmithi Kendra has published Renovation Work At Additional Sub Treasury Kozhikode Earth Work Excavation P C C R C C Tiling PlasteringWhite Wash Aluminium Fabrication Msgrill Painting Electrical And Plumbing Works. Submission Date for this Tender is 28-09-2020. Electrical Maintenance Tenders in Mananchira Kozhikode Kerala. Bidders can get complete Tender details and download the document.
Name of Work: Renovation work at Additional Sub Treasury, Kozhikode | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | RENOVATION WORK Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm\n | BI01010001010000000000000515BI0100001113 | 52.902 | sqm |
2 | 2 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of\ncolumns, etc for mass concrete | BI01010001010000000000000515BI0100001114 | 1.44 | sqm |
3 | 3 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | 3 | each | |
4 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and\nshuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm\nnominal size) | 2.175 | cum | |
5 | 5 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be\nspecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,\nblack of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 51.956 | sqm | |
6 | 6 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the\nmanufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete | 13.811 | sqm | |
7 | 7 | Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S.\ngusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces | 4.2 | sqm | |
8 | 8 | Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC\nfoam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm\nwidth & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mmx 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchorfastener as per manufacturer's specification and direction of Engineer-in-charge.\n | 15 | m | |
9 | 9 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles &rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall\nhave one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screwholding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm,painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solventcement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styleswith the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge.Decorative finish (both side wood grained finish) | 5.041 | sqm | |
10 | 10 | Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and\nlabour charges etc complete as per the direction of site Engineer-in-charge.\n | 1 | each | |
11 | 11 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including\ncutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 600 | kg | |
12 | 12 | Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile\nOrganic Compound) content.With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre | 16.161 | sqm | |
13 | 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or\nmore coats on new work | 24.666 | sqm | |
14 | 14 | Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile\nOrganic Compound) content.With water thinnable cement primer on walls surface having VOC content\nless than 50 grams / litre\n | 54.96 | sqm | |
15 | 15 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 54.96 | sqm | |
16 | 16 | CONSTRUCTION OF NEW TOILET Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal\nof unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. | 0.72 | cum | |
17 | 17 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats,\narchitrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | 2 | each | |
18 | 18 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and\ndisposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In\ncement mortar\n | 0.54 | cum | |
19 | 19 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,\ngirders bressumers and cantilevers | 7.221 | sqm | |
20 | 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and\nshuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm\nnominal size)\n | 1.154 | cum | |
21 | 21 | Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size\nconfirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete\n | 2.971 | cum | |
22 | 22 | Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150\n landings,balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).\n | 0.462 | cum | |
23 | 23 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)\n | 61.59 | sqm | |
24 | 24 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be\nspecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,\nblack of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.\n | 20.34 | sqm | |
25 | 25 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the\nmanufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | 8.714 | sqm | |
26 | 26 | Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC\nfoam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm\nwidth & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mmx 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchorfastener as per manufacturer's specification and direction of Engineer-in-charge | 10 | m | |
27 | 27 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles &rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall\nhave one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screwholding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm,painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding(Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solventcement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm completeas per manufacturer's specifications and direction of Engineer -in-charge.Non decorative finish\n | 3.361 | sqm | |
28 | 28 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up thegaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever\nrequired including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium(minimum thickness of powder coating 50 micron) | 5.861 | kilogram | |
29 | 29 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powdercoating 50 micron) | 8.115 | kilogram | |
30 | 30 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood\nparticle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windowsshutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 2.1 | sqm | |
31 | 31 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDMrubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness\n | 0.54 | sqm | |
32 | 32 | Hydraulic door closer bottle type MS body with necessary accessories and screws complete\n | 1 | each | |
33 | 33 | Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or\nround bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden\nframes with rawl plugs screws etc\n | 10.8 | kilogram | |
34 | 34 | Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile\nOrganic Compound) content.With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre | 0.54 | sqm | |
35 | 35 | Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile\nOrganic Compound) content.With water thinnable cement primer on walls surface having VOC content\nless than 50 grams / litre | 60.785 | sqm | |
36 | 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or\nmore coats on new work | 0.54 | sqm | |
37 | 37 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 60.785 | sqm | |
38 | 38 | ELECTRICAL AND PLUMBING WORK Supply and fixing Urinal\n | 2 | each | |
39 | 39 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | 3 | each | |
40 | 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:\nWhite Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | 2 | each | |
41 | 41 | Supply & fixing Long body tap | 8 | each | |
42 | 42 | Supply and fixing Stop cock | 2 | each | |
43 | 43 | Supply and fixing angle cock | 8 | each | |
44 | 44 | Supply and fixing 25 mm PVC Valve | 6 | each | |
45 | 45 | Supply and fixing water tank 500 litre | 1 | each | |
46 | 46 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | 2 | each | |
47 | 47 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white | 3 | each | |
48 | 48 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid | 2 | each | |
49 | 49 | Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | 4 | each | |
50 | 50 | Supply and provide Nylon connection in existing urinal and wash basin etc | 9 | each | |
51 | 51 | Supply and fixing Handicaped safety guard | 3 | each | |
52 | 52 | Supply and fixing Towel rad | 5 | each | |
53 | 53 | Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :\nRectangular shape 453x357 mm | 4 | each | |
54 | 54 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2 | 60 | m | |
55 | 55 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 | 80 | m | |
56 | 56 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 | 40 | m | |
57 | 57 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2 | 30 | m | |
58 | 58 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend | 4 | each | |
59 | 59 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow | 2 | each | |
60 | 60 | Supply and fixing 4 way 4 trap with gratins | 3 | each | |
61 | 61 | Labour Charge for Clearing the Existing Manhole | 3 | each | |
62 | 62 | Supply and Installations Man hole with cover | 4 | each | |
63 | 63 | Supply and Installations waste water tank with cover | 1 | each | |
64 | 64 | Supply and Fixing basin tap | 4 | each | |
65 | 65 | Supply and Fixing Wastecoupler | 4 | each | |
66 | 66 | Supply & Fixing 4Feet LED Tube set with Tube | 3 | each | |
67 | 67 | Supply & Fixing Bulk head with LED | 6 | each | |
68 | 68 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C | 10 | each | |
69 | 69 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire | 120 | m | |
70 | 70 | Supplying and fixing exhaust fan including cost of all materials labour charges etc complete | 3 | each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail