Tender For Civil Works- 1 Material and Labour for PCC (1:4:8) Type D2 (40 mm graded aggre-gate) as in foundations, filling and mass-concrete work complete all as specified and as directed. 2 Demolition of Brickwork built in Cement mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. 3 Material and Labour for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. 4 Material and Labour for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar 1:4 complete all as specified and as directed. 5 Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed. 6 Material and Labour for PCC (1:2:4) type B-0, using 12.5mm graded stone aggregates, as in kerb/ benching/ coping, bed plates, for fixing of hold fast, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. 7 Material and Labour for 40 mm thick PCC (1:2:4) type B1 (20 mm graded stone agg) as in flooring, finished even and smooth with using extra cement complete all as specified and directed. 8 Taking down cement plaster of any description, including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. 9 Material and Labour for 15mm thick plastering on brick wall surface in CM (1:6) finished even and fair complete all as specified and directed. 10 Material and Labour for complete removal of existing treatment including Washing, rubbing down and stopping etc and applying two coats of white wash on walls complete all as specified and directed. 11 Material and Labour for preparing old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed. 12 Material and Labour for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. 13 Material and Labour for preparation of old treated/decorative surfaces of wall and applying one coat of acrylic distemper all as specificed and directed. 14 Material and Labour for preparation of old wall surfaces incl removal of old treatment and applying 3 mm thick wall care putty to give a uniform finish complete all as specified and as directed. 15 All as per above item 14 but on ceiling. 16 Supply and Fixing in repair 5 mm thick beveled edge best quality looking mirror of size 600x450 mm , mounted on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and as directed. 17 Supply and Fixing in repair 5 mm thick beveled edge best quality looking mirror of size 1200x600 mm , mounted on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and as directed. 18 Material and Labour for 75 mm thick PCC 1:3:6 type C-2 as in plinth protection & surface finish even and smooth without using extra cement complete all as specified and as directed. 19 Material and Labour for PCC (1:3:6) type C-2 using 40 mm stone aggregate as in surface channels and drains complete all as specified and directed. 20 Taking down chowkat with shutter( without taking down shutters from the frame) n.exc 1.5 sqm complete all as specified and as directed. 21 Taking down chowkat with shutter( without taking down shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm complete all as specified and as directed. 22 Taking down shutters exc 1 sq. m and n exc 2 sq. m each and refixing in same opening after necessary easing & adjusting complete all as specified and as directed. 23 Supply and Fixing second class hard wood (SAL), plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. 24 Supply and Fixing 35mm thick factory made plain framed, panelled door shutters (two panel) of IInd class hard wood rail and styles, with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed. 25 Supply and Fixing for 35 mm thick factory made Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. divided in to quares,with plain, chamfered or rounded , mitred and rebated sash bars, any numbers ; edges of framing and shash bars moulded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section8, 8.24 (a) ; supplied and fitted to chowkats complete all as specified and as directed. 26 Supply and Fixing 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 27 Material and Labour for preparation of old painted surface of wood and wooden based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. 28 Supply and Fixing in repair framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars barred iron doors; ladders framed alusters; wald ways; railings; framework of water tanks and similar work confrming to Fe-290 Gde -E 165 complete all as specified and as directed. 29 Material and Labour for preparation of old painted surface of steel material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. 30 Material and Labour for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and incl a coat of pink primer complete all as specified and as directed. 31 Supply and Fixing in repairs Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg complete all as specified and as directed. 32 Supply and Fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, MS guard bar complete with glazing bars, dovetailed or welded including taking down old steel window complete all as specified and as directed.Note-Guard bars will be measured and paid separately 33 S&F 30 mm thick factory made plain colour solid panel PVC Ventilator shutter consisting of frame made out of M.S. tube of 19 gauge thickness and size of 19 mm x 19 mm for stiles and 15 mm x 15 mm top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded Plain PVC ‘C’ channel of size 30 x 50 mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on the either side, 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Paneling SS wire mess 0.63 mm dia of wire and average width of aperture 1.18 mm of upper side of the lock rail and 4mm thick frosted glass of the lower side of lock rail. to be fitted in the M.S. frame welded to be stiles and rails with 30m wide x 5 mm thick PVC sheet beading on the either side and joined together with solvent cement adhesive etc. An additional 5 mm thick Plain PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-incharge, manufacturer’s specification & drawing. 34 Taking down aluminium door(any size) change of pivot, beading, gasket, setting of door and change of damaged style /rail any length in aluminium section thickness not less 1.55 mm match with existing anodised /power coated complete all as specified and as directed. 35 Taking down shutters of any description exc 1.0sqm but not exc 2 sqm each complete all as specified and as directed. 36 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel/aluminium frames glazed with putty or fixed with beads complete all as specified and as directed. 37 Supply and Fixing 4 mm thick sheet glass, ordinary quality and glazing with oil putty /wooden beads in square n. exc 0.5 sqm in each pane complete all as specified and as directed. 38 Supply and Fixing 5 mm thick sheet plain glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane incl beading complete all as specified and as directed. 39 Supply and Fixing 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. 40 Supply and Fixing in reapir 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. 41 Supply and Fixing in repair 100mm butt hinges medium weight, stainless steel complete all as specified and as directed. 42 Supply and Fixing 100mm butt hinges medium weight, stainless steel complete all as specified and as directed. 43 Supply and Fixing 75 mm butt hinges medium weight, stainless steel complete all as specified and as directed. 44 Supply and Fixing 200 mm long aluminium anodised extruded handles fabricated type complete all as specified and as directed. 45 Supply and Fixing in repair 200 mm long aluminium anodised extruded handles fabricated type complete all as specified and as directed. 46 Supply and Fixing aluminium alloy, anodised sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. 47 Supply and Fixing in repair aluminium alloy, anodised sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. 48 Supply and Fixing in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. 49 Supply and Fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. 50 Supply and Fixing in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. 51 Supply and Fixing in repair PVC (SWR)110 mm bore pipes single socketed in any length with rubber ring joints and laid in trenches or in floor complete all as specified and as directed. 52 Supply and Fixing in repair PVC (SWR)110 mm bore pipes single socketed in any length with rubber ring joints and fixed to wall complete all as specified and as directed. 53 Supply and Fixing 110 mm bore PVC (SWR) bends any radius including necessary cutting in brick wall and making good to match with existing surface complete all as specified and as directed. 54 Supply and Fixing 110 mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed. 55 Cleaning and removing all scale and dirt etc from PVC tanks (Exc.1000 ltr n.exc 2000 ltr) and from mouths of circulating pipes etc complete all as specified and as directed. 56 Supply and Fixing in repair Brass chromium plated shower rose 125mm size complete all as specified and as directed. 57 S&F in repair grating doom 125mm dia of PTMT (Minimum weight 40gms) complete all as specified and as directed. 58 Supply and Fixing in repair sinks with drainage board made of stain less steel 1mm thick,kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and as directed. 59 Supply and Fixing 32 mm dia waste pipe for wash hand basin and urinal down pipe fixed in repairs complete all as specified and as directed. 60 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 61 Material and Labour for coloured non skid ceramic tiles 7-8 mm thick (square/rectangular), area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) to receive the top layer complete all as specified and as directed. 62 Material and Labour for coloured, glazed ceramic tiles size 450x300x 7-8mm thick, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10 mm thick rendering in CM (1:3) complete all as specified and as directed. 63 Material and Labour for light shade Vitrified ceramic tiles 9-10 mm thick (Sqr/ rectangular) Polished, area of each tiles n.exc. 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white/colour cement to match, over and including scread bed of 15 mm thick iln CM 1:6 complete all as specified and as directed. 64 Supply and Fixing in repairs vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish off the premises complete all as directed . 65 Supply and Fixing in Repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. 66 Supply and Fixing in repair vitreous china wash down water closet (Pedestal pattern ) including PVC seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc complete all as specified and as directed. 67 Supply and Fixing in Repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. 68 Disconnecting existing water tanks of capacity Exc 500 Ltrs but n exc 1000 Ltrs of any type , setting aside (or lowering if required) for repairs, etc and removing from the site complete all as specfied and as diected. 69 Supply & Fixing 1000Lts capacity rotational moulded polythylene water storage tanks (ISI embossed) (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. 70 Supply and Fixing in Repair ball valve high pressure of PTMT 20mm bore ( minimum weight 210gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed complete all as specified and as directed. 71 Supply and Fixing in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia complete all as specified and as directed. 72 Supply and Fixing in repair 15mm bore stop valve, cast copper alloy with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 73 Supply and Fixing in repair PTMT 15mm bore stop valve,screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 74 Supply and Fixing in Repairs 15 mm Dia CP Bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 75 Supply and Fixing in Repairs 15 mm Dia Bib taps,standard of PTMT any colour high pressure, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 76 Supply and Fixing in repair 600 mm PVC connection 15 mm size with PTMT nut complete all as specified and as directed. 77 Taking up or down 15mm bore steel water tubing (GI Pipe) and connections complete all as specified and as directed. 78 Taking up or down 32 mm bore steel water tubing (GI Pipe) and connections complete all as specified and as directed. 79 Supply and Fixing galvanised 15 mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed. 80 Supply and Fixing galvanised 32 mm bore steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed. 81 Supply and Fixing in repair 20 mm bore (Outer dia) CPVC pipes of SDR 11and plain/brass CPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and as directed. 82 Supply and Fixing in repair 25 mm bore (Outer dia) CPVC pipes of SDR 11and plain/brass CPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and as directed. 83 Supply and Fixing Towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws & wooden/plastic cleats complete all as specified and as directed. 84 Supply and Fixing in repair vitreous china white wash down water closet one piece floor mounted coupled closet (670x 365 x 840mm) including PVC seat cover closed pattern with flat bottem and cistern set with dual flush fitting and mild steel chromium plated hinge device,P or S trap,connection to drain or outgoing pipe and to flushing pipe, anti syphonage pipe joint to socket or stoper etc complete all as specified and as directed.Make-Parryware model Cascade NXT (Closet-C0232/86 ,seat E8300,cistern C0765) or eqv in Hindwarte/Cera 85 Supply and Fixing in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia and 600mm long pvc connection complete all as specified and directed.Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc. 86 Supply and Fixing in repair 15 mm bore pillar taps, cast copper alloy, chromium plated, Fancy type screwed down for pipe, high pressure , with or without lettered HOT or COLD with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed. 87 Material and Labour for Granite(of any type) 20 mm thick slab, machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15 mm thick screed bed in cement mortar 1:6 including grinding & polishing complete all as specified and as directed. 88 Material and labour for 18-20mm thck machine cut Kota Stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. 89 Supply and Fixing mild steel Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed. 90 S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. 91 Material and Labour for applying two coats of exterior emulsion paint (apex from asian paint or equivalent make as specified) on external wall surfaces after complete removal of existing treatment including necessary scaffoding upto 8 storey Bldg complete all as specified and as directed. 92 Supply and Fixing in repairs for Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 64mmX45mmX1.55mm and shutter of section 20mm X40mm X1.55mm including 4 mm thick glass of two shutter and one shutter of stainless steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm taking down old windows with necessary all fittings complete all as per manufacturers instructions complete all as specified and as directed. 93 Supply and Fixing in repairs powder coated aluminum window (double shuttered double leaf) side hung type with stainless steel butt hinges, one shutter glazed with and including 5 mm thick plain sheet glass and other shutter with stainless steel wire cloth of 0.36 mm dia of wire and average width of aperture 1.18mm fixed with stainless steel wire staples, rubber gasket, stopper , aluminium grills of 70mm aperture, aluminium anodised handle 100mm long ,aluminium anodised tower bolts 100mm long and peg stay etc, size of aluminum frame shall be 100mmx40mmx1.55mm and shutter frame shall be 40mmx20mmx1.55mm after and including dismantling of existing unserviceable window complete all as specified and as directed.Note : 1 No Glazed shutter(double leaf), 1 No Gauged shutter (double leaf) and aluminium grill shall constitute one unit. 94 Cleaning and dusting of GI pipes line 15 to 25 mm dia by GI wire and pressure pump and washing down whole GI line complete all as specified and as directed. 95 Supply and Fixing in repair PVC Health faucet with all necessary fittings complete all as specified and as directed. 96 Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. beams, columns ,slab ,chajja,lintels etc. 50 mm average thickness including tapering all edges, making square shoulders of cavities air and cleaning of exposed concrete surface of lightly picking materials by manual method including foreign materials , loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed upto 8 storey bldg.(INCL necessary scaffolding) 97 Removing of concrete all around reinforcement bar upto 16 mm dia and over from behind the reinforcing bars average 25mm (but not less than 15mm air gap)by manual methods (using wire brushing ,chiselling etc) and applying chloride free rust removing chemical on rusting steel reinforcement bar and removing all rust from steel reinforcement bar by emery paper and cleaning the area throughly by water and allow it to dry and totally rust free of reinforcement bar all as complete as per manufacturers instruction as specified and as directed. upto 8 storey bldg. 98 Material , labour and prepared existing reinforcement surface by brush and application two component epoxy zinc rich primer on existing reinforcement surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre complete all as specified and directed.upto 8 storey bldg.(INCL necessary scaffolding) 99 Material , labour and placing in position free flow shrinkage cementitious micro concrete of compressive strength, flexural strength shall not be less than 50 MPa at 28 days , 5MPa at 28 days respectively for strengthening of beams, columns & other structural elements of average thickness 50mm and including surface preparation & suitable type formwork etc. as per manufacturers instruction complete all as specified and as directed. upto 8 storey bldg. 100 Supply materials and application of two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days , 7MPa at 28 days respectively( maximum coverage area 1.3 sqm per 25 kg pack @ 10 mm thickness) over a coat of epoxy Bonding agent on existing surface for strengthening of beams, columns & other structural elements of average thickness 25mm and morter shall be applied in layers n.exc 6mm thick in layers and including surface preparation as per manufacturers instruction complete all as specified and as directed.upto 8 storey bldg.Note:- This item shall be execution where shuttering is not possible or small patch repairs of structural elements . 101 Material , labour for applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre incl 10mm thick plaster as per manufacturers instruction complete all as specified and as directed. upto 8 storey bldg.(INCL necessary scaffolding) 102 Supply and Fixing in repair PTMT Soap Dish 600 mm long fixed with screws and all necessary fittings complete all as specified and as directed. 103 Demolation of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) complete all as specified and as directed. 104 Material and Labour for RCC(Nominal Mix) in type-B1 1:1.5:3 (20mm graded aggregate) pre cast slabs supported on walls for cup board and Kitchen slabs complete all as specified and as directed. 105 S&F TMT bars 8 mm to 10 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips,Fe-410-S 0r Fe-410-O complete all as specified and as directed. 106 Material and Labour formwork to rough finished surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping complete all as specified and directed. 107 Supply and Fixing factory made solid panel PVC door frame of size 50mmx47mm out of 5mm plain colour PVC sheet reinforced with M.S. square tube,incl hold fast complete all as specified and as directed. 108 Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail and bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and as directed. 109 Material and Labour in repair 12.00 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partitions complete all as specified and as directed. 110 Supply & fixing 100 mm dia cast iron spigot and socket centrifugally cast conforn to IS 3984-1984 (Spun pipe)soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and as directed. 111 Supply and Fixing in repair 100 mm bore CI bend fixed with cement joints, fixed to walls complete all as specified and as directed. 112 Supply and Fixing in repair 100 mm CI branch pieces, single (equal or unequal), ordinary or inverted(spigot or socket type) or with parallel branches , complete all as specified and as directed. 113 Supply and Fixing floor door stopper of overall length of cover plate 150mm, brass body and tonuge with hard drawn steel spring complete all as specified and as directed. 114 Material and Labour for grinding and polishing of old kota stone flooring, landing, risers,steps all as specified and as directed. 115 Material and Labour cleaning of existing drains silt,debris,sludge,water including removing of drain cover and recovering after cleaning and removals and getting out outside the premises complete all as specified and as directed. 116 Pumping out of water / liquid / sludge or any other waste/materials stagnated in septic tank / soak wells /drains /manholes and discharge the same to nallah / drains through hose pipe or by other means water tanker . complete all as specified and directed.Note-Only sludge portion to be measured 117 Supply and Fixing in repair 15 mm bore Brass CP Surgical Elbow operated mixer tap for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.Make: Jaquar Cat No FLR-CHR 5166 or equivalent as listed. 118 Supply and Fixing in repair 25 mm bore stainless steel powder coated curtain rails including brackets of stainless steel, stops, rollers etc as required etc complete all as specified and directed 119 Supply and Fixing in repairs double action floor door spring hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. 120 Grubbing up and uprootinng of trees / plants from external walls of bldgs pouring muratic acid for burning risidual roots in any . Racking out the dead roots from plants / concrete joints upto its penetrated portion and filling wit PCC (1:2:4) 20 mm graded aggr and finishing the surface with rendering in CM (1:4) complete all as specified and as directed upto 8 storey bldg. 121 Material and Labour in repair for suspended false ceiling (Decorative type) system using chicogo metalic (E grid) exposed suspend system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39mm x 24mm x 0.80mm thick (thcikness comprising of GI/04 + PPPCGS/0.3mm & weight of runner 1.35kg for 3600mm length) cross tee of dimension 29mm x 24mm x 0.8mm thick wall angle 22.2mm x 22.2 mm x 0.65mm thick (thickness comprising of GI/0.35 + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050 mm length) with and including 4mm thick HPSC (High pressure steam cured) pre-primed self embossed textured designer board, water resistant, termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system duly suspended with 6 mm dia GI bars hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (weight - 0.007 kg /clip) hold down clips (weight - 0.0035 kg/clip) with provn of light fixture complete all as specified and as directed.Make : Everest or equivalent)
