Rural Development Government Departments Closing in 0 days TDR #25211051

Construction Of High Level R . C . C . Bridge With Approch Road Over Baya River In Murgiya Chak To Piroi Ghat At Piroi Village Under Goraul Block In Vaishali Dist . Under Naward

Issued by Government Departments · MAHUA, Bihar
Tender Value
4.82 Crore
Estimated cost
Bid Submission
27 Aug 2020
0 days left
EMD
9.64 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
MAHUA → Bihar
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of High Level R . C . C . Bridge With Approch Road Over Baya River In Murgiya Chak To Piroi Ghat At Piroi Village Under Goraul Block In Vaishali Dist . Under Naward

BOQ

Name of Work: Construction of High Level R.C.C. Bridge With Approch Road Over Baya River in Murgiya Chak to Piroi Ghat at Piroi Village Under Goraul Block in Vaishali Dist. Under NAWARD
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (Ordinary soil up to 3 m depth)775.22CUM
22RCC Grade M35 in Pile:--Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m.831.6M
33RCC Grade M35 in Pile Cap:-- Cement Concrete for Reinforced Concrete in Pile Cap complete as per Drawing and Technical Specification556.22CUM
44Providing and laying of PCC M15 levelling course 100mm thick below the foundation.28.46CUM
55Supplying fitting and placing Un-coated HYSD Bar reinforcement in foundation complete as per Drawing and Technical Specification125.14MT
66RCC in substructure with concrete (in Abutment & pier shaft) Complete as per Drawing and Technical Specifications.31.53CUM
77Pier Cap342CUM
88Back filling behind abutment, wing wall and return wall, complete as per Drawing and \technical Specification.950.61CUM
99Providing Weep Holes in Abutment Cap with 100mm dia AC Pipe:-- Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications.144NO
1010Supply Fitting & Fixing Elasto-Meric Bearing & seismic Pad :-- Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications.322560CUCM
1111Providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in CI. 2504.22 of MORTH Specification of not less than 600mm behind abutment, wing and return wall to the full height compacted.233.16CUM
1212Supplying, fitting and placing HYSD Bar reinforcement in substructure complete as per Drawing and Technical Specification.54.64MT
1313Providing PCC / RCC M 30 Grade & Super structure :-- Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification326.55CUM
1414Providing HYSD/ MS Bar in all types of RCC work:-- Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications .72.72MT
1515Wearing Coat :-- Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications45.3CUM
1616Providing Drainage spout:-- Drainage Spouts complete as per drawing and Technical specification32NO
1717Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.42.24M
1818Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.176.6M
1919Providing PCC M15 grade Below Approach Slab:-- PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification7.18CUM
2020Providing PCC / RCC M30 in Approach Slab:-- Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification16.3CUM
2121White washing of parapet walls:-White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915194.26SQM
2222Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications351.7CUM
2323Providing and laying filter materials underneath pitching in slopes complete as per Drawing & Technical Specifications.138.03CUM
2424Cost of detail surveying and contouring work.1LS
2525Providing and making of bentonite tank.1LS
2626Carriying out the confirmatory boring for soil investigation for Foundation as per clause 2400 of MOST Specification.3NO
2727Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.2334.81CUM
2828Granular sub base Gr-I:-- Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.213.3CUM
2929Providing 75 mm thick WBM Grade-III materials including all leads and lifts all complete job as per drawing all leads and lifts complete job as per drawing and T.S Clause 404 & Direction of E/I.75.91CUM
3030Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.1012.5SQM
3131Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.1012.5SQM
3232Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 5091012.5SQM
3333Providing boundary pillars and F.I :-- Posts Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25-1967, fixed in position including finishing and lettering but excluding painting36EACH
3434Providing and fixing of typical informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.12EACH
3535Maintainance for 1st year1Year
3636Maintainance for 2nd year1Year
3737Maintainance for 3rd year1Year
3838Maintainance for 4th year1Year
3939Maintainance for 5th year1Year
40401% Labour1Rs
414112% GST1Rs
4242Seigniorage1Rs

AI Tender Summary

OUR REF NO 25211051
AUTHORITY Government Departments
TENDER VALUE 4.82 Crore
LAST DATE 27-08-2020
Authority
Authority Name Rural Works Department
Work Description Construction Of High Level R . C . C . Bridge With Approch Road Over Baya River In Murgiya Chak To Piroi Ghat At Piroi Village Under Goraul Block In Vaishali Dist . Under Naward
Basic Detail
Tender No NAB-20-MAHUA-01
Bidding Type Tender
Location
City MAHUA
State Bihar
Key Dates
Publish Date 20 Aug 2020
Submission Date 27 Aug 2020
Open Date 27 Aug 2020
Finance
Tender Value 4.82 Crore
Tender Fee 10000
EMD 9.64 Lakhs
Exemption Not Available
Document List
SUDHI.pdf
BEA79E4E-9A31-4AE3-909D-8DA9E673EB96.html
nabsbd.pdf
Tendernotice_1.pdf
BOQ_164914.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 20, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 27, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 27, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

SUDHI.pdf

html

BEA79E4E-9A31-4AE3-909D-8DA9E673EB96.html

pdf

nabsbd.pdf

pdf

Tendernotice_1.pdf

xls

BOQ_164914.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender