Renovation And Alteration Work Of Grampanchayat Office Building ( Stage-2 ) At Village Rukadi , Tal . Hatkanagale , Dist . Kolhapur
Tender Value
4.92 Lakhs
Estimated cost
Bid Submission
27 Aug 2020
0 days left
EMD
4929
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Village Panchayat Rukadi,Tal-Hatkanangale → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation And Alteration Work Of Grampanchayat Office Building ( Stage-2 ) At Village Rukadi , Tal . Hatkanagale , Dist . Kolhapur
BOQ
| Name of Work : Renovation and Alteration work of Grampanchayat office Building (Stage-2) at Village Rukadi, Tal.Hatkanagale, Dist.Kolhapur | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and fixing Meeting Table of approved length made from 18 mm thick ISI marked 303 grade boiling water resistant plywood for Top & vertical boxes 20 mm wide length wise one no & width wise three nos with teak wood lepping on exposed edges of plywood finished with melamine polish with french polish top finished with 1 millimetter thick laminate & internal surface to be finished 0.80 thick laminate as peer drawing etc complete. As directed by Enginger incharge\r\n\nNon-Dsr Item\nAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | BI01010001010000000000000515BI0100001112 | 8.16 | Square Metre |
| 2 | 2 | Providing and fixing of Executive table of size 1800 milimetre long X 900 milimetre depth X 750 milimetre height, top and gable end to be made of membrane finish with soft water fall edges and curved panel and decorated anodized section modesty panel to be made of 18 milimetre thick prelaminated particle board with polyvinyl chloride edge band as per drawing.\nItem / Page No : 21 / 460\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001113 | 1.35 | Number |
| 3 | 3 | Providing and fixing 75 mm thick partitions made of frame 18mm thick Indian Standard Institution marked 303 Grade boiling Water Resistant plywood of 36 mm thick & 50 mm thick & 50 mm wide with spacing of 600 mm ceneter to center both verically & horizontally. Frame shall be covered on both side with 8 mm thcik Is 303 grade boiling water Resistant plywood& 12 mm thick. glass with itching proces fixed with the help of teak wood lipping required size finished with 1 mm thick laminate including all hardware, fixtures etc. complete as per detailed drawing and design (before exection sample should be approved from Engineer incharge)\nNon-Dsr Item\nAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | BI01010001010000000000000515BI0100001114 | 15.88 | Square Metre |
| 4 | 4 | Providing and fixing doors 30 mm thick commercial flush door as per IS 2202 finished with 1 mm thick laminate on both side including hydraulic door closer S.S. hinges, brass door 150 mm handle, brass door stoper etc complete. as per detail drawing and design incluidng (before exeuction sample should be got approved from Engineer incharge0\nNon-Dsr Item\nAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | BI01010001010000000000000515BI0100001115 | 6.3 | Square Metre |
| 5 | 5 | Providing and arrangemnt of high back chair, tilt mechanism with multilocking, high density cushion on seat, composite leather with metalic silver finish base and arms with polyurethene castors, gaslift for height adjustment.\nItem / Page No : 41 / 466\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001116 | 5 | Number |
| 6 | 6 | Providing and arrangemnt of mid back chair, ECO CTS mechanism, fixed armrest, gaslift for seat height adjustment, standard 5-prong P/Nylon base with fabric upholstery.\nItem / Page No : 43 / 466\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001117 | 17 | Number |
| 7 | 7 | Desing supply,fabrication and fixing acrylic multingual braille (raised dots) singnboards of size 6\"x9\" for titles,disigned as per theawings issued and having 4 milimters thick blue acrylic bace plate with upper case san serif words made of white acrylic non glare cut out leeters of height 15 milimeter raised not the equivalent word/s written in hindi with devnagari non glare acrylic letters of height 15 milimeter raised not less then 0.8 milimeter above base plate grade 2/ garde 1 braille to integral with the sing face and be raised 0.5 milimeter above base plate .each signboard to be fixed as per manufacturers specifications on the wall adjoining the respective room door at a height of 1200 milimetre from finished floor level and as per the directions by the enginner in-charges Item / Page No : 87/488 | BI01010001010000000000000515BI0100001118 | 5 | Number |
| 8 | 8 | Add Insurance towards labour at 1.00%\t\nNon-Dsr Item\nAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | BI01010001010000000000000515BI0100001119 | 1 | Job |
| 9 | 9 | Add G.S.T. on Residential and Buildings at 12%\t\t\nNon-Dsr Item\nAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | BI01010001010000000000000515BI0100001120 | 1 | Job |
AI Tender Summary
Tender Timeline
Aug 20, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 28, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender