Water Resources and Irrigation Government Departments Closing in 0 days TDR #25207593

Co Fis Tinche Serzing From Shakas Nallah In Gp Keylong Distt . Ls H . P Sh Laying , Jointing And Testing Hdpe Pipe Of 110 Mm Dia , Ptra Cutting , R/Wall , Crate Work , C/O Desilting Tank And Co Cc Lining Job I

Issued by Government Departments · Keylong, Himachal Pradesh
Tender Value
14.22 Lakhs
Estimated cost
Bid Submission
26 Aug 2020
0 days left
EMD
28500
Bank guarantee accepted
Document Fee
400
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Keylong → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Co Fis Tinche Serzing From Shakas Nallah In Gp Keylong Distt . Ls H . P Sh Laying , Jointing And Testing Hdpe Pipe Of 110 Mm Dia , Ptra Cutting , R/Wall , Crate Work , C/O Desilting Tank And Co Cc Lining Job I

BOQ

Name of work:- C/o FIS Tinche Serzing from Shakas Nallah in GP Keylong Distt. L&S (H.P,) (SH:- Laying, Jointing and Testing HDPE pipe of 110 mm dia from RD 200 to 455, Ptra cutting RD 0 to 255, R/Wall RD 215 to 230,C/o Crate work from RD 0 to 50, RD 135 to 150, C/o Desilting Tank and C/o CC Lining). Job-I Estimated cost: 14,22,924/- Earnest Money:-28,500/- Time : Six Months Cost of tender Form: 400/-
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Cutting in earth work and disposal of excavated earth in all kind of soil such as pick work, jumper work, blasting work in soft/ hard rock or chiseling wedging, out soft/ hard rock where blasting is prohibited i/c all leads and lifts complete as per direction of Engineer-in-charge.
21.01Pick & Jumper work449.05Cubic metre
32Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge.166.06Cubic metre
43Excavation in earth work and disposal of all excavated earth upto lead of 20 metre and lift upto 1.50 metre, disposed earth to be levelled and neatly dressed including all leads and lifts complete as per direction of Engineer-in-charge48Cubic metre
54Providing & Laying cement concrete 1:3:6 ( 1 cement : 3 sand : 6graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation & plinth within all leads and lifts as per satisfaction and direction of Engineer-in-charge.9.67Cubic metre
65Providing and laying cement concrete 1:1.5:3 ( 1cement: 1.5sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-Foundation & plinth within all leads and lifts as per the direction of Engineer-in-Charge.2.69Cubic metre
75.01Walls (any thickness but not exceeding 0.1 metre thickness) including attached pilasters, butresses, plinth and string courses etc. from top of foundation level upto floor two level with in all leads and lifts as per the direction of Engineer-in-Charge.10.16Cubic metre
86Providing form work with steel plates of 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give a fair finish including centring , shuttering, propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:-
96.01Vertical surface such as walls (any thickness) partitions and the like including attached pilasters buttresses, plint and string courses and the like with in all leads and lifts as per direction of Engineer-in-Charge.65.02Square metre
107Providing Mild/TOR steel reinforcement for RCC work i/c bending, binding & placing in position complete up to floor two level (TOR/Mild steel ) in all leads and lifts as per direction of Engineer-in charge.1230.69Kilogramg
118Steel work welded in built up sections trusses and framed work including cutting ,hoisting fixing in position and applying a priming coat of red lead paint complete with in all leads and lifts as per direction of Engineer-in-Charge.19.07Kilogramg
129Providing and RCC work smooth finihing of the exposed with cement mortor 1:3 (1 cement :3 sand) in all leads and lifts as per direction of the Engineer-in-charge.66.62Cubic metre
1310Random rubble masonery /polygonal rubble masonary ( Uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with CC 1 : 6 : 12 ( 1 cement: 6 sand: 12 graded stone aggregate 20mm nominal size) in C.M. 1: 6 (1cement : 6sand) in Breast walls & retaining walls within all leads and lifts as per satisfaction and direction of Engineer-in-charge.9.75Cubic metre
1411C/O Dry rubble masonry in breast wall and retaining wall revetment walls and parapets etc. with in all leads and lifts as per satisfaction and direction of Engineer-in-charge.23.94Cubic metre
1512Providing Cement Concrete lining of the 15 cm thick or less for the Irrigation channel using cement concrete 1:3:6 (1 cement : 3 Sand :6 graded stone aggregate 20mm nominal size ) within all lead and lift as per the direction of Engineer in charge.
1612.01Hand mixed concrete lining in the bed.12Cubic metre
1712.02Hand mixed concrete lining on side slope.12Cubic metre
1813Extra allowances for form work in concrete linning on side slopes all leads and lifts complete as per direction of Engineer-in-Charge.12Cubic metre
1914Wire crate of interlink chain filled with boulder with square cut faces against the chain( interlink chain to be measured and paid separately) in all leads and lifts as per the direction of Engineer-in-Charge.203.14Cubic metre
2015Wire crate made of interlink chain filled with boulder with square cut faces against the wire ( Boulder filling to be measured and paid separately) interlinked chain 5mm thick corresponding to SWG. 6 (15cmX 15cm) mesh as per the direction of Engineer-in-Charge.(Labour Rate)812.56Square metre
2116Laying, jointing & trenches GMS tubes fitting (Earth work in trenches to be measured and paid for sepratly (LR)12Running metre
2217P/F CI sluice valve of Bir/Kartar make with flange. The sluice valve conforming to IS: 780 having class PN 10. The dia of valve as mentioned belowb complete in all lead and lift as per direction of Engineer-in-Charge1Number
2318Laying, Jointing & Testing of HDPE pipe of following dia in trenches 10.00Kg PN 6kgf /cm^2 working pressure having grade (PE-80) as per IS :4984-2016 complete with in all lead and lift as per direction of Engineer-in-Charge (earth work in trenches to be meausred and paid for separately).
2418.01HDPE pipe 110 mm OD PN-6 as (IS: 4984-2016) PE-80255Running metre

AI Tender Summary

OUR REF NO 25207593
AUTHORITY Government Departments
TENDER VALUE 14.22 Lakhs
LAST DATE 26-08-2020
Authority
Authority Name Irrigation And Public Health Department
Work Description Co Fis Tinche Serzing From Shakas Nallah In Gp Keylong Distt . Ls H . P Sh Laying , Jointing And Testing Hdpe Pipe Of 110 Mm Dia , Ptra Cutting , R/Wall , Crate Work , C/O Desilting Tank And Co Cc Lining Job I
Basic Detail
Tender No 3124-3174
Bidding Type Tender
Location
City Keylong
State Himachal Pradesh
Key Dates
Publish Date 20 Aug 2020
Submission Date 26 Aug 2020
Open Date 27 Aug 2020
Finance
Tender Value 14.22 Lakhs
Tender Fee 400
EMD 28500
Exemption Not Available
Document List
06848F2A-4A6C-46AE-940A-4DCD0A26337E.html
Form6.pdf
Tendernotice_1.pdf
BOQ_59022.xls
TC.pdf
Form8.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 20, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 26, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 27, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

06848F2A-4A6C-46AE-940A-4DCD0A26337E.html

pdf

Form6.pdf

pdf

Tendernotice_1.pdf

xls

BOQ_59022.xls

pdf

TC.pdf

pdf

Form8.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders