Construction Of Office Building Cum Ward Vikash Kendra Two No At 02 Different Location In Ward No 04 08 Under Nagar Parishad Phusro Bokaro
Tender Value
74.78 Lakhs
Estimated cost
Bid Submission
08 Sep 2020
0 days left
EMD
1.49 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Phusro → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Office Building Cum Ward Vikash Kendra Two No At 02 Different Location In Ward No 04 08 Under Nagar Parishad Phusro Bokaro
BOQ
| Name of Work:Construction Of Office Building Cum Ward Vikash Kendra 02 (Two) No. at 02 (Two) different location in Ward No. – 04 & 08 Under Nagar Parishad Phusro, Bokaro. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. | 24.347 | M3 | |
| 2 | 2 | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item-A+B) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. | 85.61 | M3 | |
| 3 | 3 | Earth work in filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50m and lift of 1.5m all complete as per specification and direction of E/l. (Mode of measurement compacted volume) | 25.2 | M3 | |
| 4 | 4 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l. (Mode of measurement compacted volume) | 33.332 | M3 | |
| 5 | 5 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. | 11.223 | M2 | |
| 6 | 6 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. | 179.261 | M2 | |
| 7 | 7 | Providing P.C.C. M-150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement concrete in mixer and placing in position, vibriting, striking, curing taxes and royalty all complete as per building specification and direction of E/l. | 1.44 | M3 | |
| 8 | 8 | Providing P.C.C./R.C.C. M-75 with nominal mix of (1:4:8) in foundation with approved quality of stone metal grade IV (37mm to 22.4mm) and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing tax and royalty all complete as per building specification and direction of E/l. | 17.114 | M3 | |
| 9 | 9 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 500x500 mm | 124.195 | M2 | |
| 10 | 10 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 500x500 mm | 15.067 | M2 | |
| 11 | 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 51.194 | M2 | |
| 12 | 12 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. | 19.828 | M2 | |
| 13 | 13 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | 35.799 | M2 | |
| 14 | 14 | Providing 25mm thick 2nd class patent stone flooring (1:3:5) with stone chips in two layers, bottom layer 19mm thick (1:3:5) with 12mm. to 6mm. size graded stone chips and top layer 6mm thick (1:3) with 6mm down stone chips in panels including cost of curing, finishing the surface smooth by rubbing with carborundum stone taxes and royalty all complete as per building specification and direction of E/I. | 54.047 | M2 | |
| 15 | 15 | Providing P.C.C./R.C.C. M-200 with nominal mix of (1:1½:3) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | 20.876 | M3 | |
| 16 | 16 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in column with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | 11.992 | M3 | |
| 17 | 17 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in beam of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | 22.606 | M3 | |
| 18 | 18 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in lintel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | 4.04 | M3 | |
| 19 | 19 | Providing av. 63mm thick R.C.C. M-200 with nominal mix of (1:1½:3) in chhajja with approved quality of stone chips 20mm to 10mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including making drip coarse in concrete screening, centering, shuttening, mixing drip coarse in mixer and placing in position, vibriting, striking, 6mm cement plaster (1:4) in ceiling and sides of chhajja with sand of F.M. 1.5, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | 3.15 | M2 | |
| 20 | 20 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | 21.973 | M3 | |
| 21 | 21 | Providing P.C.C./R.C.C. M-200 with nominal mix of (1:1½:3) in staircase with approved quality of stone chips 20mm to 10mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement mortar in mixer and placing in position, vibriting, striking, curing (but excluding the cost of reinforcement) tax and royalty all complete as per building specification and direction of E/l. | 3.066 | M3 | |
| 22 | 22 | Providiag designation 75A brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. | 10.825 | M3 | |
| 23 | 23 | Providiag designation 75B brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. | 3.969 | M3 | |
| 24 | 24 | Providing 25mm thick damp proof coarse with cement concrete M-200 with nominal mix of (1:1½:3) with approved quality of stone chips of 20mm to 10mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttening, mixing cement concrete in mixer with 5% Cico or any other approved water proofing compound and placing in position, vibriting, striking, curing taxes and royalty all complete as per building specification and direction of E/l. | 11.335 | M2 | |
| 25 | 25 | Providiag 125mm thick reinforced designation 75A brick work in Cement Mortar (1:4) in super structure with approved quality of clean coarse sand of F.M. 2 including providing 10mm thick mortar joint, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. | 122.481 | M2 | |
| 26 | 26 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. | 61.97 | M3 | |
| 27 | 27 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. | 903.477 | M2 | |
| 28 | 28 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. | 163.915 | M2 | |
| 29 | 29 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations:\n(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.\n(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.\n(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.\n(d) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. | 128 | M2 | |
| 30 | 30 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | 1121.29 | M2 | |
| 31 | 31 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding , washing of floors and taxes all complete as per specification and direction of E/I. | 757.372 | M2 | |
| 32 | 32 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | 363.922 | M2 | |
| 33 | 33 | Providing primer coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement- Area shall be multiplied by the co-efficient as indicated in building specification). | 20.16 | M2 | |
| 34 | 34 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I. | 24.48 | M2 | |
| 35 | 35 | Supplying, fitting and fixing good quality well dressed and well seasoned sal wood in chaukhat in doors, windows skylights fanlights and central windows opening, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I. | 0.63 | M3 | |
| 36 | 36 | Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. | 14.4 | M2 | |
| 37 | 37 | Supplying, fitting and fixing 38 mm thick solid core type decorative double leaf flush door shutter with both sides decorative with black core standard make with aluminium fittings such as hinges, tower bolts, handle, cleats and sand block taxes all complete as per building specification and direction of E/I. (Both side teak) | 27.56 | M2 | |
| 38 | 38 | Providing two coats of painting with ready mixed paint over a coat of primer of approved shade and make over new wooden surface including preparing the surface after cleaning, removing dirt, scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. | 55.12 | M2 | |
| 39 | 39 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | 98.18 | Kg. | |
| 40 | 40 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion\nPolyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | 79.125 | Kg. | |
| 41 | 41 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness | 24.48 | M2 | |
| 42 | 42 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.\nPowder coated minimum thickness 50 micron aluminium | 35 | Nos. | |
| 43 | 43 | Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site hoisting as per building specification and direction of E/I. | 650.765 | Kg. | |
| 44 | 44 | Providing Tor steel reinforcement 8mm dia rods as per approved design and drawing excluding carriage of bars to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. - TMT Fe 500 (Only valid for SAIL & TATA stell) | 2.71 | MT | |
| 45 | 45 | Providing TMT steel reinforcement 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.\n10mm dia | 1.31 | MT | |
| 46 | 46 | 12mm dia | 1.31 | MT | |
| 47 | 47 | 16mm dia | 1.31 | MT | |
| 48 | 48 | Providing and fixing fan hook of 16mm dia TMT M.S. bar 1 meter long bent to required size and shape placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. | 10 | Nos. | |
| 49 | 49 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | 36.38 | M2 | |
| 50 | 50 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes. | 7.3 | M | |
| 51 | 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. | |||
| 52 | 52 | Coupler - 110mm | 2 | Nos. | |
| 53 | 53 | Bend 87.5° - 110mm | 2 | Nos. | |
| 54 | 54 | Shoe (Plain) - 110mm | 2 | Nos. | |
| 55 | 55 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with verticle double channels 20 x 10 x 2mm at 100 centres and braced with M.S. flat diagonals 20 x 30mm with top and bottom rails or T iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers handles, including applying a priming coat of red lead paint, carriage, hoisting and all complete as per building specification and direction of E/l. | 6.5 | M2 | |
| 56 | 56 | Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I. | 37.54 | M2 | |
| 57 | 57 | Providing 25 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. | |||
| 58 | 58 | Providing 12mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. | 42.67 | M2 | |
| 59 | 59 | Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. | 4 | Nos. | |
| 60 | 60 | Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.\nAll types of soil - 300 mm dia | 60 | M | |
| 61 | 61 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.\n100 mm nominal size dia | 60 | M | |
| 62 | 62 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | 2.13 | M3 | |
| 63 | 63 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | 2.13 | M3 | |
| 64 | 64 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. | 1.06 | M3 | |
| 65 | 65 | Providing lead caulked joints to sand cast iron rain water pipes and fittings : 100 mm dia Pipe | 2 | Nos. | |
| 66 | 66 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin-charge. | 3 | Nos. | |
| 67 | 67 | Carriage of materials\nCement - Lead 3 Km | 35.39 | MT | |
| 68 | 68 | Sand - Lead 20 km | 130.39 | M3 | |
| 69 | 69 | Stone Chips - Lead 15 km | 89.7 | M3 | |
| 70 | 70 | Bricks - Lead 20 km | 43.7 | ‰ Nos. | |
| 71 | 71 | Plumbing & Sanitary Work\nSupplying, fitting and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I \"p\" trap 15 liters C.I. or C. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings. C.I or C.C brackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.\n580mm long, with 12.50 litre low level P.V.C. cistern | 4 | nos. | |
| 72 | 72 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware Urinal of Parry Hindustan or any other I.S.S approved make with 5 liters capacity C.I. outomatic flushing cistern of Reliance or other I.S.S approved make with all fittings with C.I or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I body brass spindle stop cock of approved quality weight not less than 400 grams, 15 mm P.V.C./Alkethene pipe 450mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a primer coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I.\nFalt back or standing corner (600mm x 350mm) | 2 | nos. | |
| 73 | 73 | Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. | 4 | nos. | |
| 74 | 74 | Supplying and fixing gun metal full way valve of approved quality all complete as per specification and direction of E/I. | |||
| 75 | 75 | 20mm dia | 2 | Nos. | |
| 76 | 76 | 25mm dia | 1 | Nos. | |
| 77 | 77 | Providing and fixing brass stop cock of approved quality all complete as per specification and direction of E/I. - 15mm dia | 8 | Nos. | |
| 78 | 78 | Cutting chhajjas or concrete for laying G.I. pipe and restoring the same with R.C.C. (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/I. | 8 | nos. | |
| 79 | 79 | Making holes in walls for G.I. pipe and restoring the same all complete as per specification and direction of E/I.\n250mm thick wall | 8 | nos. | |
| 80 | 80 | Cutting drain widthwise above G.L. for laying P.V.C. pipe and restoring brick work in cement mortar (1:4), 12mm cement plaster in (1:4) with neat cement punning as per specification and direction of E/I. | 2 | nos. | |
| 81 | 81 | Making holes in walls for laying P.V.C. pipes and restoring the same after pipe laying as per specification and direction of E/I. | 4 | nos. | |
| 82 | 82 | Supplying all tools and labours for cutting chhajjas or concrete for laying P.V.C. pipes and making good the same as per specification and direction of E/I. | 4 | nos. | |
| 83 | 83 | Supplying, fitting and fitting bathroom fittings of approved make and as per I.S. specification all cost complete as per direction of E/I. (All rates have been adopted from the Basic Rate of S.O.R. + Labour Charge & Contractor's Profit) | |||
| 84 | 84 | Pillar Cock - Leng Neck (Basic Rate Rs. 801.00 + 15% for Labour Charge & C.P.) | 4 | nos. | |
| 85 | 85 | Bib Cock - Leng Thread (Basic Rate Rs. 744.00 + 15% for Labour Charge & C.P.) | 4 | nos. | |
| 86 | 86 | Angular Stop Cock - Leng Thread (Basic Rate Rs. 590.00 + 15% for Labour Charge & C.P.) | 8 | nos. | |
| 87 | 87 | Glass Self (Basic Rate Rs. 655.00 + 15% for Labour Charge & C.P.) | 2 | nos. | |
| 88 | 88 | 32mm dia P.V.C. Waste Pipe 750mm long with Cushion (Basic Rate Rs. 52.00 + 15% for Labour Charge & C.P.) | 2 | nos. | |
| 89 | 89 | 15mm C.P. Nipple with Coupling (Basic Rate Rs. 75.00 + 15% for Labour Charge & C.P.) | 4 | nos. | |
| 90 | 90 | Steel Jali - 100mm dia (Basic Rate Rs. 41.00 + 15% for Labour Charge & C.P.) | 4 | nos. | |
| 91 | 91 | Solvant Cement (Basic Rate Rs. 240.00 + 15% for Labour Charge & C.P.) | 1 | Kg. | |
| 92 | 92 | Supplying, fitting and fitting Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fitting, 3mm plywood board and C.P. hinges to fix with mirror, 600 x 450mm size | 2 | nos. | |
| 93 | 93 | Supplying, fitting and fitting C.P. brass shop dish container medium quality with screw and hinges etc. | 2 | nos. | |
| 94 | 94 | Providing and fixing 15mm dia and 45cm long P.V.C. connection pipe with heavy quality brass coupling at both ends etc. all complete as per specification and direction of E/I. | 2 | nos. | |
| 95 | 95 | Supplying materials and labours for construction of inspection chamber of designation class 75B brick size 750mm deco, 650x450mm internal dimension having 250mm all thickness in cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I. cover with frame (weight not less than 36 kg.) along with earth work in excavation and refilling all complete as per specification and direction of E/I. | 1 | nos. | |
| 96 | 96 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction\nof Engineer in Charge.\nConcealed work, including cutting chases and making good the walls etc. | |||
| 97 | 97 | 20mm nominal outer dia pipes | 50 | M | |
| 98 | 98 | 25mm nominal outer dia pipes | 25 | M | |
| 99 | 99 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes. | 50 | M | |
| 100 | 100 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. | |||
| 101 | 101 | Single tee with door - 110x110x110 mm | 5 | nos. | |
| 102 | 102 | 110mm Bend 87.5° | 5 | nos. | |
| 103 | 103 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 2000 | Ltr. | |
| 104 | 104 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design, 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 1 | nos. | |
| 105 | 105 | Supplying and fixing P.V.C. fittings of approved make confirming to I.S. 1729 including supplying nails and bobbins, fixing solutions including earth work or masonary work, cutting and remaking and providing as the case may be all complete as per specification and direction of E/I. | |||
| 106 | 106 | P.V.C. Plain bend - 100mm dia | 10 | nos. | |
| 107 | 107 | P.V.C. Double Junction with Door and Ear - 100mm dia | 6 | nos. | |
| 108 | 108 | P.V.C. Cowel - 100mm dia | 4 | nos. | |
| 109 | 109 | Floor Trap - 100mm dia | 2 | nos. | |
| 110 | 110 | Ring Rubber | 10 | nos. | |
| 111 | 111 | Lubricant | 1 | nos. | |
| 112 | 112 | Door Piece | 1 | nos. | |
| 113 | 113 | Providing and fixing P.T.M.T. flange 15mm size 56mm dia suitable for 15mm taps and weighing not less than 5 grams of approved I.S.S. make. | 4 | nos. | |
| 114 | 114 | Electrification Work\nWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.\nGroup - B | 35 | Point | |
| 115 | 115 | Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. | 2 | Nos. | |
| 116 | 116 | Wiring for light/ power plug with 2x4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 no. 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. | 45 | M | |
| 117 | 117 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). | 10 | Nos. | |
| 118 | 118 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. | 5 | Nos. | |
| 119 | 119 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps \"C\" series, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. | 2 | Nos. | |
| 120 | 120 | Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. | 1 | Nos. | |
| 121 | 121 | Circuit/sub main wiring in steel conduit wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. | |||
| 122 | 122 | 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire | 100 | M | |
| 123 | 123 | 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire | 60 | M | |
| 124 | 124 | 2 x 4 sq. mm + 1 x 4 sq. mm earth wire | 50 | M | |
| 125 | 125 | 2 x 6 sq. mm + 1 x 6 sq. mm earth wire | 75 | M | |
| 126 | 126 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. | 25 | Nos. | |
| 127 | 127 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)\n12 way, Double door | 1 | Set | |
| 128 | 128 | Supplying and fixing following 240 volts, \"C\" series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||
| 129 | 129 | 6/32 amps, Single Pole | 12 | Nos. | |
| 130 | 130 | 40 amps. Double Pole | 1 | Nos. | |
| 131 | 131 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. | 13 | Nos. | |
| 132 | 132 | Supplying and fixing brass batten/angle holder including connection etc. as required. | 20 | Nos. | |
| 133 | 133 | Supplying and fixing electronic musical call bell suitable for DC/AC single phase, 230 volts, complete as required. | 2 | Nos. | |
| 134 | 134 | Erection of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required. | 20 | Nos. | |
| 135 | 135 | Installation, testing and commissioning of pre-wired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. | 20 | Nos. | |
| 136 | 136 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. | 12 | Nos. | |
| 137 | 137 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | 12 | Nos. | |
| 138 | 138 | Earthing with G.I. earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as required. (but without charcoal or coke and salt) | 1 | Set | |
| 139 | 139 | Extra for using salt and coke for G.I. or copper earth plate earth electrode as required. | 1 | Set | |
| 140 | 140 | Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. | 3 | M | |
| 141 | 141 | Providing and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required. | 3 | M | |
| 142 | 142 | Cost of drilling 200mm x 165mm x 125m deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, air compressor and equipments as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles upto the site. | |||
| 143 | 143 | (a) From 0.00 M to 50.00 M below G.L. | 50 | M | |
| 144 | 144 | (b) From 51.00 M to 125.00 M below G.L. | 75 | M | |
| 145 | 145 | (c) From 126.00 M to 150.00 M below G.L. | 25 | M | |
| 146 | 146 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.\n200 mm nominal size dia | 25 | M | |
| 147 | 147 | Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. | 2 | Hours | |
| 148 | 148 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of : 200 mm dia | 2 | Nos. | |
| 149 | 149 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.\n200 mm clamp | 2 | Nos. | |
| 150 | 150 | Supplying 100mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/fibre bearing to withstand entire hydraulic thrust, water proof winding shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 metre submersible copper conductor cable in single/double run shall be provided with each pump.\n2.0 H.P. Submersible Motor Pump (20 stages) | 1 | Nos. | |
| 151 | 151 | Supplying, fitting and fixing of standard make starter pannel board with arrangement of all necessary protection including all taxes, royalty etc. all complete as per direction of E/I. | 1 | Nos. | |
| 152 | 152 | Supplying flat, flexible submersible cable with copper conductor, P.V.C. insulated and P.V.C. sheathred.\n3 core 4 sq mm | 130 | M | |
| 153 | 153 | Supplying, fitting, fixing and lowering 50mm dia G.I. column pipe all complete as per direction of E/I. | 115 | M | |
| 154 | 154 | Goods & Services Tax (G.S.T.) - 12% | 3.30329e+06 | Rs. | |
| 155 | 155 | Labour Cess - 1% | 3.69968e+06 | Rs. | |
| 156 | 156 | Add for photo & Sign Board | 1 | Rs. | |
| 157 | 157 | Cost of 2 Nos. Construction of Ward Office Building | 2 | Units |
AI Tender Summary
Tender Timeline
Aug 19, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 11, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender