Installation Of Haripur Rl Project Under Naktideul Block In Sambalpur District
Tender Value
19.12 Lakhs
Estimated cost
Bid Submission
31 Aug 2020
0 days left
EMD
19126
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Naktideul → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Haripur Rl Project Under Naktideul Block In Sambalpur District
BOQ
| Name of Work : Installation and Energisation of Haripur L.I. Project under Naktideul Block in Sambalpur District of L.I. Division, Sambalpur | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Part-A | BI01010001010000000000000515BI0100001112 | ||
| 2 | 2 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. | 1163.62 | Cum. | |
| 3 | 3 | Filling the foundation and plinth with excavated material in hard soil as directed by the Engineer-incharge. | 1163.62 | Cum. | |
| 4 | 4 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. | 60.95 | Cum. | |
| 5 | 5 | Cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. | 4.13 | Cum. | |
| 6 | 6 | Cement concrete (1:2:4) with 12mm size black C.B. hand broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge. | 0.29 | Cum. | |
| 7 | 7 | R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. | 9.16 | Cum. | |
| 8 | 8 | Brick work with Fly ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge. | 4.54 | Cum. | |
| 9 | 9 | Brick work with Fly ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in Super structure etc. complete as per the Engineer-incharge. | 0.53 | Cum. | |
| 10 | 10 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. | 148.15 | Sqm. | |
| 11 | 11 | Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. | 129.68 | Sqm. | |
| 12 | 12 | Rigid smooth centering & shuttering for R.C.C. Works walls & fins including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.\n(a) Chajja | 82.44 | Sqm. | |
| 13 | 13 | Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & tieing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. Including cost of HYSD Steel Bar (FE 415/ FE 500) etc complete as directed by the Engineer-incharge. | 7.29 | Qtl. | |
| 14 | 14 | White washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the Engineer-incharge. | 11.65 | Sqm. | |
| 15 | 15 | Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. | 1 | No. | |
| 16 | 16 | Rough stone dry packing on the river embankment near pump foundation to strengthening it. | 11 | Cum. | |
| 17 | 17 | Finishing wall with artistic paint over two coat of weather coat up to 3 mtr. height. | 10.65 | Sqm. | |
| 18 | 18 | Supply of 300 mm R.C.C. hum pipe( NP 3 )as per specifications including laying & fitting | 12.5 | mtr. | |
| 19 | 19 | Fitting of un plasticised 200mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. | 780 | Mtr. | |
| 20 | 20 | Fitting of un plasticised 160 mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. | 630 | Mtr. | |
| 21 | 21 | Fabrication of special joint including cutting and welding of pipes out of M.S. pipe / G.I.pipe including welding of flange at one end and other end suitable for connection to delviery pipe lines of pump sets including cost of cutting and welding, materials and fitting it in proper alighmentwith the deivery pipe line of pump sets etc. complete as per direction of Enginee-in-Charge. | 1 | No. | |
| 22 | 22 | Cost of river embankment cutting, cleaning & fitting of suction & delivery fittng with flanges, bends, foot valve, Sluice valve, N.R.Valve etc. including cost of 1/8\" rubber insertion, nut & bolt, white lead paint, etc. complete as per direction of Engineer-in-Charge. | 1 | No. | |
| 23 | 23 | Welding, laying and fitting of 200 mm Ø MS pipe etc. complete as per the direction of the Engineer-incharge. | 18 | Mtr. | |
| 24 | 24 | Monoblock pump set total head of 28 mtrs capable to discharge 1700 LPM with 15HP/9.40 KW squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \"F\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery = 100mmx100mm with BEE Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares. | 1 | No. | |
| 25 | 25 | 3 x 16 sqmm Tarpodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. | 70 | Mtr. | |
| 26 | 26 | Supplying of 200mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - II UPVC pipe to withstand pressure of 4.0kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. | 180 | mtr. | |
| 27 | 27 | Supplying of 200mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. | 600 | Mtr. | |
| 28 | 28 | Supplying of 160 mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. | 630 | mtr. | |
| 29 | 29 | 100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark. | 18 | Mtr. | |
| 30 | 30 | 200 mm M.S. pipes with plain ends in random length of 4 to 7 mtrs. Confirming to BIS 3589 with minimum wall thickness of pipes should be 5.5 mm each pipe should bear ISI specification and manufacturers name / Trade mark. Steel grade of the pipe should be Fe330 | 18 | Mtr. | |
| 31 | 31 | 200 mm Ø MS Flange medium duty as per IS specification | 6 | No. | |
| 32 | 32 | 100 mm dia G.I. bend IS No.1239(Part-II/1992) | 4 | No. | |
| 33 | 33 | 100 mm dia G.I. flange IS No.6392 / 1971 | 10 | No. | |
| 34 | 34 | 100 mm Ø C.I. Foot Valve should be of swing type friction less with single disc confirming to IS – 4038/1979 of reputed brand | 1 | No. | |
| 35 | 35 | 100 mm Ø Sluice Valve Flanged type of Manufacturing Standard - BS 5163 / IS14846 Pressure Ratings PN10. | 1 | No. | |
| 36 | 36 | 100mm Non-return valve C I double flanged swing type PN - 1.0 as per IS:5312 part-I with by-pass arrangement | 1 | No. | |
| 37 | 37 | 200 mm Non-return valve C I double flanged swing type PN - 1.0 as per IS:5312 part-I with by-pass arrangement | 1 | No. | |
| 38 | 38 | 100 X 100 X 80 mm dial ball valve for priming. | 1 | No. | |
| 39 | 39 | 200 mm Ø PVC coupler (4 kg/cm2) Agricultural PVC fittings confirming to IS-4995/1988 with latest ammendment | 6 | No. | |
| 40 | 40 | 160 mm Ø PVC coupler (4 kg/cm2) Agricultural PVC fittings confirming to IS-4995/1988 with latest ammendment | 6 | No. | |
| 41 | 41 | 200 x 200 x 160 mm PVC Tee Confirming to IS 4985-2000 | 6 | No. | |
| 42 | 42 | 160 mm x160 mm x160 mm Ø PVC Equal Tee (W.P. 4 kgf/cm2) confirming to IS-4995/1988 with latest ammendment | 6 | No. | |
| 43 | 43 | 160mm x 160mm x 110mm MS riser Tee with accessories including labour cost for fitting. | 12 | Set | |
| 44 | 44 | 150 mm dia C.I butterfly valve with all accessories. | 4 | Set | |
| 45 | 45 | 200 mm Ø PVC End Cap (W.P. 10 kgf/cm2) confirming to IS-4995/1988 with latest ammendment | 1 | No. | |
| 46 | 46 | 50 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark. Including labour charges for fitting. | 4 | Set | |
| 47 | 47 | Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 16 Amp (AC -3) duty contactor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter,Ameter,MCB in complete shape including Indicator Lamp & 6 KVAR capacitor as per direction of Engineer-in-Charge. | 1 | No. | |
| 48 | 48 | Base frame for motorl (size 0.40mx0.20m) made with 3\" size M.S. channel having suitable holes for fitting of panel Board, coloured with one coat of red oxide primer and two coats of smokes grey enamel paint & Base frame for motor (size 0.50mx0.27m) made with 3\" size M.S. channel having suitable holes for fittings of different size and make 3 phase centrifugal monoblock pump set from 10 H.P. to 15 H.P. coloured with one coat of red oxide primer & two coats of smoke grey enamel paint. | 1 | No. | |
| 49 | 49 | Motor hood size (0.45mx0.45mx0.60m) made with 18 SWG (cold rolled M.S.Sheet with one coat of red oxide primer and two coats of smoke gray / navey blue enamel n both side (inside & outside) suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for attachement with the groves on rear side of the pannel board. | 1 | No. | |
| 50 | 50 | T & P Materials Kit comprising of Tester,Screw driver,DE Spanner,Plier,Ring Spanner suitable for maintenance ol L.I.project. | 1 | Set | |
| 51 | 51 | Part-B | BI01010001010000000000000515BI0100001161 | ||
| 52 | 52 | Cost of 11/0.4 KV, 25 KVA Transformer | 1 | No. | |
| 53 | 53 | Cost of 9 mtr. 300 Kg, PSC pole | 13 | No. | |
| 54 | 54 | Cost of materials for 11KV line 3 Ph. 3 wire with 55 mm Sq. AAAC without pole (80 mtr. span) | 0.6 | Km. | |
| 55 | 55 | Cost of materials for 11 KV 3 Ph. Intermediate pole without pole | 2 | No. | |
| 56 | 56 | Tapping pole | 1 | No. | |
| 57 | 57 | Cost of materials for 11/0.4 KV, 63 KVA Sub-Station without pole & Transformer. | 1 | No. | |
| 58 | 58 | Barbed wire fencing with metal spreading | 1 | No. | |
| 59 | 59 | Spike Provision | 22 | No. | |
| 60 | 60 | Electrical Earthing including all materials as per the direction of the Engineer-incharge. | 2 | No. |
AI Tender Summary
Tender Timeline
Aug 18, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 01, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender