All India Institute Of Medical Sciences-AIIMS has published Interior Work Of Squash Court At Aiims Rishikesh. Submission Date for this Tender is 27-08-2020. Interior Work Tenders in AIIMS Rishikesh Uttarakhand. Bidders can get complete Tender details and download the document.
| Name of Work: Interior work of squash court at AIIMS RISHIKESH | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | WOODEN FLOOR – Prestige USA – (WSF Approved)\n MAPLE WOOD – Maple wood for flooring of your squash courts. Maple wood is the hardest of hard woods and is the recommended wood for squash, basketball and badminton Courts. \nMaple wood\n1. Cushion Pads- 8 mm thick cushion pads placed under the wooden sleepers for extra resilience\n2. Pine/Fir Wood Sleepers - 63mm wide x 32 mm thick x 4’+ planks, chemically treated or termites installed 18inch centre to centre\n3. 12mm Plywood\n4. Flooring – Maple, 20 x 57/83 mm, Tongue & Groove, kiln dried and treated for termites\n5. The maple flooring will be finished with anti-skid polyurethane finish.\n | item1 | 80 | sqm |
| 2 | 2 | REAR GLASS WALL – – WSF approved\nDesign supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved\ndrawings. The complete system to be designed to ccommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.\n | item2 | 18 | sqm |
| 3 | 3 | WALL PANEL SYSTEM FOR FRONT & SIDE WALLS FOR BOTH \n COURTS- Details of panel walls :-The wall panel consist of one high density board, 24mm thick approved by World squash federation (WSF) fixed to the existing building with special screws on tongue and groove joint. It will be fixed on wooden sections. The gap between the wall and panel will be filled with silica sand. The panel wall will be finished with finished laminate surface. The installation of a panel wall can only be done on a certain type of brick or concrete wall. The wall must be at least 24 cm thick. The space between the high density board and the wall is filled with fire dried silica sand.\n | item3 | 120 | sqm |
| 4 | 4 | Tin sound board | item4 | 1 | No |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
