Annual Repair And Maintenance Of Govt. Residential Building At Agatti For The Year 2020 - 2021
Tender Value
23.37 Lakhs
Estimated cost
Bid Submission
18 Aug 2020
0 days left
EMD
46748
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agatti → Lakshadweep
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Repair And Maintenance Of Govt. Residential Building At Agatti For The Year 2020 - 2021
BOQ
| Name of Work: Annual Repair and Maintenance ofGovt Residential Building Agatti for the Year 2020 -2021 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing wood work in frames of doors,windows cleretory windows and other frames wrought framed and fixed in position.(a)1st class karimeruthu wood or equivalent (Where ever necessary ) | 0.3 | cum | |
| 2 | 2 | Providing and fixing 38mm thick panalled,glazed or panalled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws karimaruthu or equivalent. | 106 | sqm | |
| 3 | 3 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. | 50 | mtr | |
| 4 | 4 | Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness. The lock ail made up of’H’ section, a UPVC hollow section of size 100x24 mm and 2 mm ± r 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). | 72 | sqm | |
| 5 | 5 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work. | 7000 | sqm | |
| 6 | 6 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work. | 500 | sqm | |
| 7 | 7 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead :Cement mortar 1:4.(where ever necessary ) | 100 | sqm | |
| 8 | 8 | Providing and fixing anodised Aluminium sliding door bolt anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. 250x16 mm | 50 | Each | |
| 9 | 9 | Providing and fixing anodised Aluminium tower bolt (barral type) anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. 200x10 mm | 70 | Each | |
| 10 | 9.1 | 100x10 mm | 200 | each | |
| 11 | 10 | Providing and fixing anodised Aluminium handle anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. 125 mm | 25 | Each | |
| 12 | 10.1 | 75 mm | 25 | each | |
| 13 | 11 | Providing and fixing anodised Aluminium hooks and eyes anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. 200 mm | 50 | each | |
| 14 | 12 | Providing anf fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required.White EWC pan with plastic seat and lid | 8 | each | |
| 15 | 13 | Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap. | 10 | each | |
| 16 | 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work). a. 20 mm nominal outer dia .Pipes. | 50 | mtr | |
| 17 | 14.1 | b. 32 mm nominal outer dia .Pipes. | 50 | mtr | |
| 18 | 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20 mm nominal outer dia .Pipes. | 75 | Mtr | |
| 19 | 16 | Providing and fixing C.P. Brass bib cock of approved quality and manufacture complete. 15 mm nominal bore | 30 | each | |
| 20 | 17 | Providing and fixing wheel valve ( PVC ) of approved quality and manufacture complete.25 mm nominal bore | 25 | each | |
| 21 | 18 | Providing and fixing CP brass angle cock of approved quality and manufacture complete.15 mm | 30 | each | |
| 22 | 19 | Providing and fixing Stailess steel A ISI 304 ( 18/8) kitchen sink asper IS 13983 with CI brackets stainless steel plug 40 mm ,including painting of fittings and brackets, cutting and making good the walls where required. With out drain board 450x400x250 mm | 10 | each | |
| 23 | 20 | Providing and fixing 600x450mm mirror of superior glass\n(approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers | 20 | each | |
| 24 | 21 | Providing and fixing chromium plated brass butt hinges with necessary screws etc. complete.\n100x70x4 mm (ordinary type) | 75 | each | |
| 25 | 21.1 | 75x65x4 mm (heavy type) | 100 | each | |
| 26 | 22 | Cement concrete block (machine moulded) masonry in in Foundation and plinth in CM 1:6 with blocks of size\n40cmx20cmx15cm.(For Septic Tank) | 10 | cum | |
| 27 | 23 | Providing and fixing precast cement concrete 1:2:4 ( 1 cement: 2 M.Sand: 4 graded stone aggregate 20mm nominal size) set in position with cement mortar 1:2 (1 cement :2 fine sand) and finished smooth with 6mm thick cement plaster 1:3 (1 cement:3 fine sand) on exposed surfaces including centering and shuttering in (a) String courses, copings, bed plates anchor blocks, plain window sills and the like | 2 | Cum | |
| 28 | 24 | Providing and fixing ceramic glazed floor tiles of size\n300x300mm (thickness to be specified by the manufacture ) of first quality confirming to IS:15622 of approved make,in colours such as White ivory, Grey, Fume red brown, laid on 20mm thick cement mortar 1:4 ( 1cement, 4 M sand ) and joining with white cement and matching pigment etc... complete. | 30 | sqm | |
| 29 | 25 | Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS:15622 ( thickness to be specified by the manufacture ) of approved make,in all colours,shades except burgundy ,bottle green,black of any size as approved by engineer-in-charge in skirting, risers of steps and dado over 12mm thick cement mortar 1:3 ( 1cement, 3 metal san) and joining with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. | 30 | sqm | |
| 30 | 26 | Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm | 50 | sqm | |
| 31 | 27 | French spirit polishing: One or more coats on old work. | 100 | sqm | |
| 32 | 28 | Providing and fixing health faucet of approved quality and manufacture complete. | 20 | each | |
| 33 | 29 | Providing and fixing CP brass Sink cock of approved quality and manufacture complete.20 mm | 10 | each | |
| 34 | 30 | Removing white or colour wash by scrapping and sand papering and preparig the surface smooth.wherever required. | 2000 | sqm | |
| 35 | 31 | Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and refilling etc. External work (6kg/cm2) (Prince, Supreme, Finolex) (a)110mm nominal bore | 50 | mtr | |
| 36 | 31.1 | (b)32mm nominal bore | 100 | mtr | |
| 37 | 31.2 | (c)25mm nominal bore | 50 | mtr | |
| 38 | 31.3 | (d)20mm nominal bore | 100 | mtr | |
| 39 | 32 | Dislodging of septic tank including disposal of sludge by digging a pit within a lead of 50 meters and covering it with sandincludingaddingdisinfectants etc.. including washing the tank and re-arranging of soak pit ,manhole etc..complete as directed by the Engineer-in-charge. | 60 | cum |
AI Tender Summary
Tender Timeline
Aug 13, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 19, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender