Military Engineer Services-MES has published Repair And Maintenance Of Air Blowers Pumps Control Electric Panels And Misc Work Of Stps In The Area Of Age U Ws Ii Under Ge U Water Supply Delhi Cantt 10. Submission Date for this Tender is 01-09-2020. Electrical Panel Tenders in GE U WATER SUPPLY DELHI CANTT 10 Delhi. Bidders can get complete Tender details and download the document.
| Name of Work: REPAIR AND MAINT OF AIRBLOWERS, PUMPS, CONTROL ELECTRIC PANELS AND MISC WORK OF STPS IN THE AREA OF AGE (U) WATER SUPPLY-II UNDER GE (U) W/S, DELHI CANTT-10 | |||||
|---|---|---|---|---|---|
| S.No | Description of work | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level all as specified and as directed. | 8 | CUM | |
| 2 | 2 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed. | 6 | CUM | |
| 3 | 3 | Removing excavated material (soil) from site to a distance not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed. | 2 | CUM | |
| 4 | 4 | Material and labour for Brick protection with sub class ‘B’ bricks old size, laid dry, flat over cable, perpendicular across the cable in trenches complete all as specified and as directed. | 0.5 | Per 1000 Nos | |
| 5 | 5 | Material and labour for Sand cushioning with fine dry sand in trenches, for cable protection complete all as specified in clauses 19.75 of MES schedule part-I and directed. | 5 | CUM | |
| 6 | 6 | manually Trench drill upto 150 mm bore dia Complete all as specified and as directed. | 6 | RM | |
| 7 | 7 | Supply & Fixing in replacement of ISI mark CI butterfly valve, of following sizes conforming to IS 13095 complete all as specified and as directed .\nMake :- ADVANCE / AUDCO / Johnson /ZOLOTO | |||
| 8 | 7.01 | (i) 40 mm bore | 2 | EACH | |
| 9 | 7.02 | (ii) 80 mm bore | 2 | EACH | |
| 10 | 7.03 | (iii) 100 mm bore | 2 | EACH | |
| 11 | 7.04 | (iv) 125 mm bore \n | 2 | EACH | |
| 12 | 7.05 | (v) 150 mm bore \n | 2 | EACH | |
| 13 | 8 | Supply and fixing in replacement XLPE insulated, sheathed, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm, 3.5 core complete all as specified and as directed. | 100 | RM | |
| 14 | 9 | Material and labour 40 mm bore GI pipe, light grade, for protection of cable, laid in trenches / under floors / Paths /along poles/ equipments etc complete all as specified & directed | 6 | RM | |
| 15 | 10 | Supply & Fixing in replacement MCCB 100 Amp 415 Volts, 25 KA, 4 pole, 50 Hz, with fixed thermal & fixed magnetic setting complete all as specified and as directed. \nMake : LEGRAND/HAGER . | 1 | EACH | |
| 16 | 11 | Supply & Fixing in replacement automatic star - delta submersible pump starter complete with contactor,size 18A and over load relay of range 12-18 A for 12.5 HP submersible pump complete all as specified and as directed. | 1 | EACH | |
| 17 | 12 | Supply & Fixing in replacement automatic star - delta submersible pump starter complete with contactor,size 25A and over load relay of range 17-25 A for 15HP submersible pump complete all as specified and as directed. | 1 | EACH | |
| 18 | 13 | Supply & Fixing in replacement standard automatic star - delta submersible pump starter complete with contactor,size 32A and over load relay of range 23-32 A for 25HP submersible pump after taking down/out pipe as existing at site complete all as specified and as directed.\n | 1 | EACH | |
| 19 | 14 | Supply & Fixing in replacement Pneumatic Timer Block suitable for mounting on contactor (9A-630A) type CPT1A complete all as specified and as directed. \nMake : HAVELLS or equivqlent as approved. | 2 | EACH | |
| 20 | 15 | Supply & Fixing in replacement 3 pole power contactor, MNX32 type ,32A-55A, complete all as specified and directed .\n | 2 | EACH | |
| 21 | 16 | Supply & Fixing in replacement 3 pole power contactor, MNX40 type,40A-55A,complete all as specified and directed | 2 | EACH | |
| 22 | 17 | Supply & Fixing in replacement 3 pole power contactor MNX25 type contactor,25A-45A, complete all as specified and directed.\n | 2 | EACH | |
| 23 | 18 | Supply and fixing in replacement thermal over load relay, type MN, range 28-42 Amp complete all as specified and as directed. | 2 | EACH | |
| 24 | 19 | Supply and fixing in replacement thermal over load relay, type MN, range 20-32 Amp complete all as specified and as directed. | 2 | EACH | |
| 25 | 20 | Supply and fixing in replacement thermal over load relay, type MN, range 13-21 Amp complete all as specified and as directed. | 2 | EACH | |
| 26 | 21 | Supply and fixing in replacement single phase preventor type VSP-II complete all as specified and as directed.\nMake :- Minilec or equivalent in L&T/ABB/LEGRAND | 6 | EACH | |
| 27 | 22 | Supply only of FRP construction solution preparations cum settling Tank with level gauge, lid, inlet / outlet connection, drain connection and fitted with speed reducer, motor and SS agitator of capacity 100 Ltr complete all as specified and directed by Engineer in charge. | 1 | EACH | |
| 28 | 23 | Supply & pouring Compressor Oil in air blower at STPs complete all as specified and as directed. \n | 120 | LTR | |
| 29 | 24 | S & F in replacement of Heat Resistance, weather proof agro shed net for covering of tanks at various STP complete with fixing arrangement around the tank complete all as specified and as directed. | 800 | Sqm | |
| 30 | 25 | Supply & fixing in replacement of Ozone Generator -9 Model -OZ INDIA -250 complete all as specified and as directed. \n | 1 | SET | |
| 31 | 26 | Supply & Fixing in replacement of following parts for Ozone generator installed at Baird Place STP. | |||
| 32 | 26.01 | Cooling Fan 6" | 1 | Each | |
| 33 | 26.02 | Cooling Fans Covers | 4 | Each | |
| 34 | 26.03 | Emergency Switch | 1 | Each | |
| 35 | 26.04 | Ozone Control Knob | 1 | Each | |
| 36 | 26.05 | Preventor 3 Phase | 1 | Each | |
| 37 | 26.06 | Oxygen Sieves beds | 4 | Each | |
| 38 | 26.07 | Air Compressor | 1 | Each | |
| 39 | 27 | Complete Cleaning & Re-wiring of ozone generator complete all as specified and as directed. | 1 | Each | |
| 40 | 28 | Supply only PVC insulated, sheathed, Copper conductor flexible cable, 1100 volts grade Heavy Duty, cross sectional area 4 sqmm, Four core complete all as specified and as directed.\n | 50 | RM | |
| 41 | 29 | Supply only PVC insulated, sheathed unarmoured, Copper conductor flexible cable, 1100 volts grade Heavy Duty, cross sectional area 10 sqmm, Seven core complete all as specified and as directed.\n | 50 | RM | |
| 42 | 30 | Supply only PVC insulated, sheathed, Copper conductor flexible cable, 1100 volts grade Heavy Duty, cross sectional area 35 sqmm, Single core complete all as specified and as directed.\n | 40 | RM | |
| 43 | 31 | Supply only PVC insulated, sheathed unarmoured, Copper conductor flexible cable, 1100 volts grade Heavy Duty, cross sectional area 50 sqmm, Single core complete all as specified and as directed.\n | 40 | RM | |
| 44 | 32 | Supply and Only 3 pole power contactor ML-4, 70 Amps,415/440 volts,50 Hz suitable for fixing in existing panel complete all as specified and as directed. \n | 1 | EACH | |
| 45 | 33 | Supply Only 3 pole power contactor ML-2, 32 Amps,415/440 volts,50 Hz suitable for fixing in existing panel complete all as specified and as directed. \n | 3 | EACH | |
| 46 | 34 | Supply only of Timer Switch series FM/1 quartz, type-QT (Daily) supply-240 AC, 50/60 Hz complete all as specified and directed by Engineer-in-Charge. | 4 | Each | |
| 47 | 35 | Supply lowring and fixing MS Column pipe, heavy duty class C flanged and drilled ISI marked 80 mm bore as per IS-1239, 2 meter in long, MS flange having PCD 125 mm and 10 mm thick including all jointing material such as bolts, nut, washers & packing sheet and connecting complete all as specified and directed. | 4 | EACH | |
| 48 | 36 | Labour for dismantling, disconnecting the Air Blower twin lobe positive displacement type of pressure upto 0.8Kg/cm2 and capacity upto 800 Cum/hr including disconnecting from channel frame and electrical panel for repair of Gear Box, refitting of gear box after oiling, greasing, alingment of pump set including transportation to workshop & back for repair and re-fixing/ assembling testing to make it functional complete inciuding cleaning of all dirt, dust etc. all as specified and directed by Engr-in-charge.\nNOTE : Spare parts required for repairing will be measured and paid under relevant item as supply only.\n | 8 | Each job | |
| 49 | 37 | Supply only following spare parts in the twin lobe positive displacement type and pressure rating upto 0.8Kg/cm2 of Make-Usha | |||
| 50 | 37.01 | Replacement of Pully V Belt SPB-1800 | 16 | No. | |
| 51 | 37.02 | Ball Bearing 6311/C3 Make-SKF/ZKL | 16 | No. | |
| 52 | 37.03 | Roller bearing 3213A Make-SKF/ZKL | 16 | No. | |
| 53 | 37.04 | Piston ring | 16 | No. | |
| 54 | 37.05 | Set of Gasket | 16 | No. | |
| 55 | 37.06 | Gear set | 3 | Each set | |
| 56 | 37.07 | Oil seal | 10 | No. | |
| 57 | 37.08 | Oil level glass | 8 | No. | |
| 58 | 37.09 | Suction air filter | 6 | Each | |
| 59 | 37.1 | Air compressor shaft welding , turning , grinding | 6 | Each Job | |
| 60 | 37.11 | Bearing tapper bush for roller bearing 22213 EK/C3 | 8 | Each | |
| 61 | 37.12 | Outer distance bush | 6 | No. | |
| 62 | 37.13 | Pressure ring | 16 | No. | |
| 63 | 37.14 | Asbestos graphite packing(casing cover) | 8 | No. | |
| 64 | 37.15 | Asbestos graphite packing(stuffing box) | 8 | No. | |
| 65 | 38 | Disconnecting Electric connections from LT Control pannel and starter of non clogging submerssible pump set of any size 5 HP to 20 HP capacity and removing the pipe line connections from discharge side and taking out submersible pump set along with, column pipe from sewage sump with the help of chain pully block including transportation to workshop and back for repair and lowering of same pump in sewage sump after repair including replacement of rusted nuts bolts, rubber gasket complete, all as specified and as directed by Engineer-in-charge. | 16 | Each Job | |
| 66 | 39 | Labour for opening the submersible pump set, repairing, rewinding and assembling the pump set including insulating material of any size 5HP to 10 HP capacity complete all as specified and as directed by Engineer-in-charge. ( Copper winding wire and other spare parts required for repairing will be measured and paid under relevant item as supply only) | 12 | Each Job | |
| 67 | 40 | Labour for opening the non clogging submerssible pump set, repairing, rewinding and assembling the pump set including insulating material of any size 12.5 HP to 20 HP capacity complete all as specified and as directed by Engineer-in-charge. ( Copper winding wire and other spare parts required for repairing will be measured and paid under relevant item as supply only) | 4 | Each Job | |
| 68 | 41 | Supply only copper winding wire of existing gauge for non clogging submersible / submersible pump / induction motor sets all as specified and directed by Engineer-in-Charge | 120 | KG | |
| 69 | 42 | Supply Only of following spare parts for submersible pump set of capacity 5 HP to 10 HP | |||
| 70 | 42.01 | SS rotor sleeve | 10 | Each | |
| 71 | 42.02 | SS rotor shaft ASS 410 | 4 | Each | |
| 72 | 42.03 | Water seal | 20 | Each | |
| 73 | 42.04 | CI Lower Housing chamber | 4 | Each | |
| 74 | 42.05 | CI upper housing chamber | 4 | Each | |
| 75 | 42.06 | Connection plate | 6 | Each | |
| 76 | 42.07 | GM suction ring | 16 | Each | |
| 77 | 42.08 | GM Impeller | 15 | Each | |
| 78 | 42.09 | SS stud with nut | 75 | Each | |
| 79 | 42.1 | Impeller nut | 5 | Each | |
| 80 | 42.11 | Impeller key | 7 | Each | |
| 81 | 42.12 | Joint of submersible cable | 7 | Each | |
| 82 | 42.13 | CI suction chamber | 6 | Each | |
| 83 | 42.14 | Mechanical seal set upper and lower | 4 | Each Set | |
| 84 | 42.15 | Jointing of cable kit without float switch | 5 | Each | |
| 85 | 42.16 | Jointing of cable kit with float switch | 5 | Each | |
| 86 | 42.17 | CI suction plate | 5 | Each | |
| 87 | 42.18 | O ring set | 5 | Each Set | |
| 88 | 42.19 | Insulation kit | 5 | Each Set | |
| 89 | 42.2 | Ball bearing 6306ZZ Make- SKF/ZKL | 10 | Each | |
| 90 | 42.21 | Roller Bearing 3308 Make-SKF/ZKL | 5 | Each | |
| 91 | 42.22 | Roller Bearing NU 305 Make-SKF/ZKL | 5 | Each | |
| 92 | 42.23 | Temperature sensor | 5 | Each | |
| 93 | 42.24 | Moisture sensor | 5 | Each | |
| 94 | 43 | Labour only for Remetaling of rotor & turning/ grinding of submersible pump set of capacity upto 10 HP | 6 | Each | |
| 95 | 44 | Repairing of stamping of stator | 5 | Each | |
| 96 | 45 | Painting of submersible pump set with two coats of synthetic enamel paint over a coat of red oxide primer | 16 | Each Job | |
| 97 | 46 | Supply only of following spare parts for non clogging submersible pump sets cap 12.5 HP to 20 HP | |||
| 98 | 46.01 | Lift Chain 12 mm SS | 30 | RM | |
| 99 | 46.02 | Mechanical seal set | 4 | Each | |
| 100 | 46.03 | Cable assembly kit | 4 | Each | |
| 101 | 46.04 | Lubrication Oil | 40 | Ltr | |
| 102 | 46.05 | Motor casing cover | 3 | Each | |
| 103 | 46.06 | impeller Bolt& nut SS | 10 | Each | |
| 104 | 46.07 | intermediate casing | 3 | Each | |
| 105 | 46.08 | Bolt with square nut for CSG | 5 | Each | |
| 106 | 46.09 | Bearing sleeves | 5 | Each | |
| 107 | 46.1 | Thread Bush | 5 | Each | |
| 108 | 46.11 | Bearing 6309 2RS1/C3 Make-SKF/ZKL | 5 | Each | |
| 109 | 46.12 | Bearing 6306 2 R S1/C3 Make-SKF/ZKL | 10 | Each | |
| 110 | 46.13 | Bearing 3212Make-SKF/ZKL | 4 | Each | |
| 111 | 46.14 | Bearing NU-207 Make-SKF/ZKL | 4 | Each | |
| 112 | 46.15 | Terminal connection plate | 4 | Each | |
| 113 | 46.16 | Moisture sensor | 4 | Each | |
| 114 | 46.17 | cable protection tube | 4 | Each | |
| 115 | 46.18 | Rubber diaphram | 4 | Each | |
| 116 | 47 | Labour for dismantling, disconnecting the centrifugal/sewage pump set from foundation including transportation to workshop and back for repair and re - fixing after repairing rewinding and assembling the pump set including insulating material of any size ,testing complete up to 15 HP all as specified and directed by E-n-C including transportation to workshop for repair. \n | 15 | Each Job | |
| 117 | 48 | Supply only the following items for DB model pumps of capacity upto 15 HP | |||
| 118 | 48.01 | CI Impeller | 4 | Each | |
| 119 | 48.02 | Pump shaft SS AISI410 | 4 | Each | |
| 120 | 48.03 | Mechanical seal for pump shaft AISI-410 | 5 | Each | |
| 121 | 48.04 | Wear ring | 6 | Each | |
| 122 | 48.05 | Gland CI | 4 | Each | |
| 123 | 48.06 | Ball bearing 6307ZZ Make- SKF/ZKL | 6 | Each | |
| 124 | 48.07 | Bearing housing NDE | 3 | Each | |
| 125 | 48.08 | Shaft Sleeve SS | 5 | Each | |
| 126 | 48.09 | impeller Nut | 5 | Each | |
| 127 | 48.1 | lock nut | 5 | Each | |
| 128 | 48.11 | Gland packing | 4 | Each | |
| 129 | 48.12 | Set of O rings | 4 | Each | |
| 130 | 48.13 | Liquid deflector | 5 | Each | |
| 131 | 48.14 | SS Gland Eye Bolt with nut | 5 | Each | |
| 132 | 48.15 | Impeller Key | 5 | Each | |
| 133 | 48.16 | Oil seal | 8 | Each | |
| 134 | 48.17 | Mechanical seal for support plate | 5 | Each | |
| 135 | 48.18 | Bent plug | 6 | Each | |
| 136 | 48.19 | Set of gasket | 6 | Each | |
| 137 | 48.2 | Support foot | 4 | Each | |
| 138 | 48.21 | Lantern ring | 5 | Each | |
| 139 | 48.22 | coupling Key CS | 6 | Each | |
| 140 | 49 | Supply Only following parts for Decantor gear box installed at Baird Place STP. | |||
| 141 | 49.01 | Bearing of size 758A-32208 Make- SKF/ZKL | 3 | Each | |
| 142 | 49.02 | Bearing of size 7513A-32213 Make- SKF/ZKL | 3 | Each | |
| 143 | 49.03 | Oil seal of size 40mm x 60mm x10mm | 3 | Each | |
| 144 | 49.04 | Oil seal of size 65mm x 90mm x12mm | 3 | Each | |
| 145 | 49.05 | SS LN bolt 8x50 | 16 | Each | |
| 146 | 49.06 | Set of gasket | 3 | Each Job | |
| 147 | 49.07 | Screw thread sleev 80 x 150mm repair | 3 | Each | |
| 148 | 49.08 | SS pin | 3 | Each | |
| 149 | 49.09 | Gun Metal Gear box repair | 2 | Each | |
| 150 | 50 | labour only for shaft repair and balancing for Decantor gear box installed at Baird Place STP all as specified and directed by Engineer-in-Charge | 2 | Each Job | |
| 151 | 51 | S & F in replacement of Flexible heavy duty flexible hose pipe, heavy duty, ISI marked of size 65 mm outer dia. all as specified and directed by Engineer-in-Charge | 12 | RM | |
| 152 | 52 | S & F in replacement of Flexible heavy duty flexible hose pipe, heavy duty, ISI marked of size 90 mm outer dia. all as specified and directed by Engineer-in-Charge | 12 | RM | |
| 153 | 53 | Supply and fixing in replacement of cloth of sludge centrifuse machine of capacity 1 cum/hr, basket type at STP Kabul Line complete all as directed by Engr in Charge. | 4 | Each set | |
| 154 | 54 | Supply & pouring Bio-Culture in aeration tank/MBBR tank at STPs complete all as specified and as directed. | 500 | LTR | |
| 155 | 55 | M &L in replacement of Providing and filling post/ frame work of stainless steel, grade 304 pipes including braces of stainless steel, plates, angle, flats, tubular sections etc including cutting, hoisting fixing with organ welding, stain finish, buffing polishing etc complete with necessary holes, nuts, bolts, caps and anchor plates of stainless steel as per design provided by engg-in-charge. | 50 | KG | |
| 156 | 56 | An amount of Rs 72035.00 shall be deducted from BOQ on account of schedule of credit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
