Plateform Gauge,Drilling Machine-Assam

Supply Of , Isi Mark The Platform Gauge Is Both Rigid And Stable Whilst As Light And Manageable As Possible. It Has Handles And Is Balanced To Enable One Person To Manoeuvre And Operate It, With Clear Simple And Precise Ruler Settings. The Gauge Can Be Used With No Fear Of Making Electrical Signalling Contact Between The Two Rails, So It Will Not Affect Any Signalling Equipment.Specifications %U2022 Aluminium Alloy And Stainless Steel %U2022 Silver Anodised And Powder Coated Yellow %U2022 2355 Horizontal X 1310 Vertical %U2022 Separates Into 2 Sections For Ease Of Transportation %U2022 14 Kg %U2022 This Gauge Is Not Screened Against High Voltage Conductor Rails %U2022 Calibration Certificate Supplied Which Requires Annual Renewal. Accuracy %B1 2Mm, Isi Mark Single Cylinder Air Cooled 4-Stroke Internal Combustion Type (3 H.P.At 3000/4000 Rpm) Petrol Start And Kerosene Run Drilling Machine Comprising Of An Integrated Driving Engine With Drilling Unit Coupled Together Rigidly In A Compact Unit To Drill Holes Up To 35 Mm Dia. In The Rail Web Of Any Type And Section Of Rail From 60 R To 60 Kg/M Having Uts Of 70 To 110 Kg/Mm2. It Should Be Able To Drill A Hole Within 3 To 4 Minutes In 60 Kg 90 Uts Rails Having Drill Spindle Rotation Should Be Between 60 To 90 R.P.M. The Tolerance For The Diameter And Position Of The Hole Shall Be + 0.7 Mm. It Should Be Able To Drill Hole Within 40 Mm Of Rail Ends And Clamp Should Ensure A Straight Hole Centrally To Both Axes. The Machine Should Be Supplied With A Mono Rail Cum Road Trolley For Moving The Machine On Road As Well As Rail By Single Man. Each Machine Shall Be Supplied With A Complete Kit Of Tools And Spare Parts Required By The Operator In Emergency And For Normal Working Of The Machine., Isi Mark Obstruction Less/Non-Infringing Type Hydraulically Operated Machine Used For Rail Distressing, Rail Welding, Installation Of Insulated Glued Joints And Other Repair Works Of Rail Failures. The Machine Shall Consist Of A Portable Assembly Of The Following Main Components :- A) Two Hydraulic Cylinders (Double Acting) Operated Through Hand Pump. B) Rail Grip And Clamp Assembly. C) Tie Car (For Pulling Operation Only) . Oil Seals(Nut Rings, O-Rings, Washer Etc.) Shall Be Of Special High Pressure Brand Of Synthetic Neoprene/Nitrile Reinforced With Tafflon (Ptfe) Back Up Rings. It Shall Be Obstruction Less In Nature I.E. No Part Of Machine Shall Project Above Rail Head While In Operation. Hydraulic Cylinders Of The Machine Shall Be Double Acting Cylinders I.E. The Machine Shall Be Able To Exert Force When Ram Is Coming Out And Also When It Is Going In. Equipment Shall Be Loaded Upto 120% Of Rated Pressure For Pulling Pressure As Well As For Pushing Pressure And Shall Be Kept Steady For 5 Minutes, The Drop In Pressure Shall Not Be More Than 10% Of Rated Pressure At The End Of This Period. After This Test, The Equipment Shall Operate Smoothly Throughout The Range Without Any Slip Or Visible Damage And Shall Not Show Any Sign Of Leakage Of Oil Or Any Other Abnormality. Each Machine Shall Be Supplied With A Complete Kit Of Ordinary Tools And Special Tools Required By The Operator In Emergency And For Normal Working Of The Machine, With One Year Onsite Warranty.

Refer document

Refer document

Refer document

	0	1	2	3	4	5	6	7	8	9
0	S.No.	PL Code\r(Group)	Item Type\rGST(Y/N)	Stock /\rNonStock	Ordering	Consider\rFor Eval	Approving\rAgency	Inspection\rAgency	Currency\rAllowed	Estimated\rRate
1	1	6032N001	Goods (Y)	Non Stock	---	Yes		CONSIGNEE	INR
2		Description :ISI MARK The platform gauge is both rigid and stable whilst as light and manageable as possible. It\rhas handles and is balanced to enable one person to manoeuvre and operate it, with clear simple and precise\rruler settings. The gauge can be used with no fear of making electrical signalling contact between the two rails, so\rit will not affect any signalling equipment.SPECIFICATIONS %u2022 Aluminium Alloy and Stainless Steel\r%u2022 Silver Anodised and Powder Coated Yellow %u2022 2355 horizontal x 1310 vertical %u2022 Separates\rinto 2 sections for ease of transportation %u2022 14 kg %u2022 This gauge is not screened against high voltage\rconductor rails %u2022 Calibration certificate supplied which requires annual renewal. Accuracy %B1 2mm
3		Consignee	AXEN/C/DL/JPZ-I	Assam	2.00 Numbers
4	2	6032N002	Goods (Y)	Non Stock	---	Yes		CONSIGNEE	INR
5		Description :ISI MARK single cylinder air cooled 4-stroke internal combustion type (3 H.P.at 3000/4000 rpm)\rPetrol start and kerosene run drilling machine comprising of an integrated driving engine with drilling unit coupled\rtogether rigidly in a compact unit to drill holes up to 35 mm dia. In the rail web of any type and section of rail from\r60 R to 60 kg/m having UTS of 70 to 110 kg/mm2. It should be able to drill a hole within 3 to 4 minutes in 60 kg 90\rUTS rails having Drill spindle rotation should be between 60 to 90 r.p.m. The tolerance for the diameter and\rposition of the hole shall be + 0.7 mm. It should be able to drill hole within 40 mm of rail ends and Clamp should\rensure a straight hole centrally to both axes. The machine should be supplied with a mono rail cum road trolley for\rmoving the machine on road as well as rail by single man. Each machine shall be supplied with a complete kit of\rtools and spare parts required by the operator in emergency and for normal working of the machine.
6		Consignee	AXEN/C/DL/JPZ-I	Assam	6.00 Numbers
7	6032N003	Goods (Y)	Non Stock	---	Yes		CONSIGNEE	INR