Welcome Maintenance To Int Electfication Incl Repair To Geyser Fans And Other Int Accessories At Beg And Centre Tb 1 And Dep Bn And Repair Maint Periodical Services Of Diesel Generating Sets And Solar Security Lights Under Age Em I Of Ge C Kirkee, Kirkee-Maharashtra

TDR : 25126027

Tender Notice
BOQ

Expired

Kirkee , Maharashtra

Tender Brief : Welcome Maintenance To Int Electfication Incl Repair To Geyser Fans And Other Int Accessories At Beg And Centre Tb 1 And Dep Bn And Repair Maint Periodical Services Of Diesel Generating Sets And Solar Security Lights Under Age Em I Of Ge C Kirkee

Document Fees
₹ 500 /-

EMD
₹ 80360.0 /-

Tender Value
₹ 40.18 Lakhs /-

Submission Date
29-08-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work : WELCOME MAINT TO INTERNAL ELECTRIFICATION INCLUDING REPAIR TO GEYSER, FANS AND OTHER INTERNAL ACCESSORIES AT BEG AND CENTRE, TB-I AND DEP BN AND REPAIR/MAINT/PERIODICAL SERVICES OF DIESEL GENERATING SETS AND SOLAR SECURITY LIGHTS UNDER AGE E/M- I OF GE (C) KIRKEE.
1	1	M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc incl dismentling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.	390	Point
2	2	M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket incl dismentling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.	170	Point
3	3	M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point on same board with other switches incl dismentling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.	240	Point
4	4	M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one two way light point controlled by two, two way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch etc incl dismentling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.	15	Point
5	5	M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly for one 16amps socket (Power) point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket all as specified and directed.	90	Point
6	6	M & L for surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.	60	RM
7	7	M & L for surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.	130	RM
8	8	M & L for surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4 sqmm as earth lead and connected to earth dolly incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.	45	RM
9	9	M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. \nNOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.	250	RM
10	10	M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FR Copper conductor cable of size 10.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FR Copper conductor cable of size 10.0 sqmm as earth lead and connected to earth dolly incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. \nNOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.	10	RM
11	11	S&F 5 Amp switch piano type single pole one way incl dismentling taking down unsv one all as specified and as directed. Make - Anchor or equivalent	910	Each
12	12	S&F 5 Amp switch piano type single pole two way incl dismentling taking down unsv one all as specified and as directed. Make - Anchor or equivalent	20	Each
13	13	S&F bell push piano type one way 240 volt incl dismentling taking down unsv one . all as specified and as directed. Make - Anchor or equivalent	20	Each
14	14	S&F socket flush type 6 amps, 5 pin, 230v incl dismentling taking down unsv one all as specified and as directed. Make - Anchor or equivalent	470	Each
15	15	S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 6 amps, 230v incl dismentling taking down unsv one all as specified and as directed. Make - Anchor or equivalent	90	Each
16	16	S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v incl dismentling taking down unsv one all as specified and as directed. Make - Anchor or equivalent	110	Each
17	17	S&F lamp Holder insulated body with back plate for batten fitting incl dismentling taking down unsv one all as specified and as directed. Make - Anchor or equivalent	150	Each
18	18	S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL. Make-HPL/Havells/CG/Bajaj/ Philips	250	Each
19	19	S&F LED lamp 3 watt, CDL, E-14 cap, (Small thread type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL. Make-HPL/Havells/CG/Bajaj/ Philips	15	Each
20	20	S&F ceiling rose surface Bakelite three terminal incl dismentling taking down unsv one all as specified and as directed. Make - Anchor or equivalent	350	Each
21	21	S&F call bell electric, ding dong, AC 240 volt, 50 HZ. incl dismentling taking down unsv one all as specified and as directed. Make - Anchor or equivalent	20	Each
22	22	S&F flush type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 Hz incl dismentling taking down unsv one all as specified and as directed. Make - Anchor or equivalent	160	Each
23	23	S&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve incl dismentling taking down unsv one all as specified and directed. MAKE- Cat Part No- 4085-87 to 4085-95 of Legrand or equivalent of Schneider/ABB.	90	Each
24	24	S&F MCB, Double Pole, 6 to 32 amps, 415 Volts, 10 KA breaking cap, ‘’C” curve incl dismentling taking down unsv one all as specified and directed. MAKE- Cat Part No- 4086-28 to 4086-36 of Legrand or equivalent of Schneider/ABB\n	30	Each
25	25	S&F MCB, Four Pole, 40 to 63 amps, 415 Volts incl dismentling taking down unsv one all as specified and directed. MAKE- Cat Part No- 4087-00 to 4087-02 of Legrand or equivalent of Schneider/ABB\n	10	Each
26	26	S&F Sheet metal enclosure two way, incl dismentling taking down unsv one all as specified and directed. MAKE- Cat Part No-5077 91 to -5077 93 of Legrand or equivalent of Schneider/ABB.	8	Each
27	27	S&F MCB distribution board,Double door, metal enclosure, SPN, 230 Volts, 4 way incl dismentling taking down unsv one all as specified and directed. MAKE- Cat Part No- 5076 10 of Legrand or equivalent of Schneider/ABB	8	Each
28	28	S&F MCB distribution board, Double door, metal enclosure, SPN, 230 Volts, 8 way incl dismentling taking down unsv one all as specified and directed. MAKE- Cat Part No- 5076 11 of Legrand or equivalent of Schneider/ABB	10	Each
29	29	S&F MCB distribution board, Double door, metal enclosure, SPN, 230 Volts,12 way incl dismentling taking down unsv one all as specified and directed. MAKE- Cat Part No- 5076 12 of Legrand or equivalent of Schneider/ABB	8	Each
30	30	S&F MCB distribution board, Double door, metal enclosure, TPN, 415 Volts, 4 way incl dismentling taking down unsv one all as specified and directed. MAKE- Cat Part No- 5076-70 of Legrand or equivalent of Schneider/ABB	4	Each
31	31	S&F Vertical MCB distribution board, as MCB incomer, Double door, metal enclosure, TPN, 415 Volts, 4 way incl dismentling taking down unsv one all as specified and directed. MAKE- Cat Part No- 5077-25 of Legrand or equivalent of Schneider/ABB	1	Each
32	32	S&F Vertical MCB distribution board, as MCCB incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way incl dismentling taking down unsv one all as specified and directed. MAKE- Cat Part No-507745 of Legrand or equivalent of Schneider/ABB	1	Each
33	33	S&F Metal plug and socket board with MCB SP 20 amp, 16 KA incl dismentling taking down unsv one all as specified and directed. MAKE- Cat Part No- 5078 11 of Legrand or equivalent of Schneider/ABB	10	Each
34	34	S&F PVC rectangular switch board of size 300mmx 250mm x50mm incl necessary cutting slots for mounting switch sockets etc incl dismentling taking down unsv one all as specified and directed. MAKE- Presto Teak/Press Fit/Plaza.	15	Each
35	35	S&F PVC rectangular switch board of size 200mmx 150mm x50mm incl necessary cutting slots for mounting switch sockets etc incl dismentling taking down unsv one all as specified and directed. MAKE- Presto Teak/Press Fit/Plaza.	25	Each
36	36	S&F PVC rectangular switch board of size 175mmx 100mm x50mm incl necessary cutting slots for mounting switch sockets etc incl dismentling taking down unsv one all as specified and directed. MAKE- Presto Teak/Press Fit/Plaza.	25	Each
37	37	S&F PVC rectangular switch board of size 100mmx 100mm x50mm incl necessary cutting slots for mounting switch sockets etc incl dismentling taking down unsv one all as specified and directed. MAKE- Presto Teak/Press Fit/Plaza.	20	Each
38	38	S&F Hylam Sheet 3mm thick on existing concealled MS/CI ractangular or Squar or round box with 04 nos cadmium coated screws and cup washer incl cutting slots for mounting switch/socket/fan regulator/ batten holder etc incl dismentling taking down unsv one	5	Sqm
39	39	S&F Round shaped recess mounted LED Flat panel down lighter, 12 watt (8\"dia), suitable for POP celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismentling taking down unsv fitting any type all as specified and directed. Make-Havells , Cat Part No LHEAABP7L1W012or equivalent in Bajaj/Philips/HPL/Havells	8	Each
40	40	S&F LED tube 20 watt retrofit to existing fluorescent FTL (T-8) fitting surface mounted after dismentling electronic ballast, internal wiring and complete rewiring with 0.5 sqmm copper flexible conductor FRLSHom connector block to one end of Bipi holder and including connecting up to ceiling rose with 0.5 sqmm two core flexible copper conductor cable all as specified and directed. Make-Cat Part No HLPLEDT8PCP20CW HPL or equivalemt in Bajaj/Philips/Crompton Greaves /Havells	300	Each
41	41	S&F industrial box type LED Batten with CRCA body, pre coated with white and prewired suitable for LED tube 1x18/20 watt 4'long incl dismentling taking down unsv fitting any type all as specified and directed. Make-HPL, Cat Part No-HLPLEDT801WT or equivelent of Bajaj/Philips/CG/Havells	280	Each
42	42	S&F LED batten tube type, 2'long, 09 watt,CDL 230 Volts , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting casing box 2 nos incl dismentling taking down unsv fitting any type all as specified and directed. Make-HPL Cat Part No- HLPT51509PCGCW or equivalemt in Bajaj/Philips/CG/Havells	40	Each
43	43	S&F LED fitting, 20 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos incl dismentling taking down unsv fitting any type all as specified and directed. Make-HPL, Cat Part No HPLLEDT5PC20W or equivalemt in Bajaj/Philips/CG/Havells	180	Each
44	44	S&F LED building security light 15 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed. Make-CG, Cat Part No LSTP-15-CDL or equivalent in Bajaj/Philips/HPL/Havells	35	Each
45	45	REPAIR TO CEILING FANS WITH FOLLOWING ITEMS OF WORK :-\nM&L for Rewinding of Ceiling fan 1200 mm sweep after dismenting complete motor assy, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/turn of super enamelled copper wire, heating, vernishing, replacement of unsv bearings / bushings, assemble of rotor and stator unit with capacitor, connecting wire, down rod, blades and testing complete. \nNote: 1. Contractor will collect fans from the complaint cells of specified area and bring back to complaint cell after repair. Cost of transportation will be inclusive of quoted rate. 2. Spares require for replacement such as bearing, Bushing, capacitor shall be measured and paid separately as supply & Fixing only. 3. Cost of Connector bock and capacitor holder shall be inclusive of the quoted rate.	150	Each
46	46	All as per item No- 45 here-in-above but for Exhaust fan 250/300 mm sweep industrial type.	20	Each
47	47	S&F ball bearing No 6201/6202/6203/6204 of SKF/Tata/NBC.	390	Each
48	48	S&F G.M. Bush bearing for ceiling fan as per existing pattern.	90	Each
49	49	S&F capacitor AC for 230 volts 50 Hz of capacity 1.8 Mfd.	10	Each
50	50	S&F capacitor AC for 230 volts 50 Hz of capacity 2.0/2.25/2.5 Mfd.	240	Each
51	51	S&F capacitor AC for 230 volts 50 Hz of capacity 3.15 Mfd.	5	Each
52	52	S&F capacitor AC for 230 volts 50 Hz of capacity 4.0 Mfd.	15	Each
53	53	Painting of ceiling fan 1200/1400 mm including scrapping, cleaning and removing dust from the blade an body and applying two coat of enamel paint over & one coat of primer all as directed by engr-in-chage	80	Each
54	54	S& F in repair of exhaust fand 300 mm PVC body, 230 vol incl dismentling taking down unsv fitting any type all as specified and directed. Make Bajaj or equivalent	70	Each
55	55	S&F PVC insulated PVC sheathed copper flexiable wire multistrand 4sqmm 3 core, ISI marked	20	RM
56	56	S&F in repair thermostat ISI marked suitable for geysers 25 Ltrs to 50 Ltrs Capacity. Make- Bajaj/Venus/Recold all as specified and directed.	25	Each
57	57	S&F in repair fusible plug marked suitable for 25 and 50 ltrs capacity Geysers all as specified and directed.	20	Each
58	58	S&F in repair heating elementMarked round/triangular bas, push type or thread type including rubber washers for 1.5/2.0 KW all as specified and directed.	20	Each
59	59	S&F in repair innner water container made of SS, vertical or horizontal type for 25/50 ltr capacity gyser all as specified and directed.	8	Each
60	60	S&F in repair of aparatus plate suitable for vertical/horizintal type Geyser 25 or 50 ltr cap all as specified and directed.	8	Each
61	61	S&F in repair heavy duty PVC connections pipe with brass hexagonal adoptersat both side 15mm dia and 450mm long for hot /cold water all as specified and directed.	15	Each
62	62	Maintenance and servicing of DG set 250 KVA,Make: Greaves Ltd including replacment of defective/wornout spares with new spares such as fuel filter, lube oil filter, gaskets, V belts,rubber hoses with clamps, nuts bolts and cleaning of alternator with vaccum cleaner and replacement of Engine oil, tappet setting ,servicing of radiator etc for the smooth operation DG set all as specified and directed. Note: 1) Replacement of spares such as fuel filters and oil filter including Nut,bolts,washers,clamps, screws and grease etc required for the service / Maintenance of the DG Sets deemed to be included in the above quoted rate. 2) Other spares required for above will be measured and paid separately under relevent items of Sch. Location: Yerwada pump house.	1	Each Job
63	63	All as item No.62 here in above but 110 KVA make kirloskar cummins installed at computer centre and indoor stadium at at BEG & Centre.	2	Each Job
64	64	All as item No.62 here in above but 50 to 70 KVA make kirloskar installed at TB-II, ADG office, Rashmi and Sarvatra Vihar.	4	Each Job
65	65	All as item No.62 here in above but 30 to 40 KVA make kirloskar installed at shooting gallery in Telephone exchange, TB-II, Kekdi Line and Nirikshan Vihar.	5	Each Job
66	66	All as item No.62 here in above but 15 to 25 KVA make kirloskar installed at TB-I Pump House,Depot Bn Pump House Baffle Range ,Depot Bn sub stn and Engine House Road.	5	Each Job
67	67	Supply only Air filter inner and outer for 250 KVA DG set Greaves Ltd\n	1	Set
68	68	Supply only Air filter inner and outer for 100 to110 KVA DG set Kirloskar cummins.\n	2	Set
69	69	Supply only Air filter inner and outer for 50 to 70 KVA DG set Make:Kirloskar.	5	Set
70	70	Supply only Air filter inner and outer for 30 and 40 KVA DG set, Make :Kirloskar	4	Set
71	71	Supply only Air filter inner and outer for 15 to 25 KVA DG set Make: Kirloskar or equivalent	5	Set
72	72	Supply only Fan belt for 250 KVA DG set,Make :JK/Dunlop	1	Each
73	73	Supply only Fan belt for 110 to 110 KVA DG set, Make :JK/Dunlop	2	Each
74	74	Supply only Fan belt for 50 to 70 KVA DG set,Make : JK/Dunlop	5	Each
75	75	Supply only Fan belt for 30 to 40 KVA DG set,Make : JK/Dunlop	4	Each
76	76	Supply only Fan belt for 15 to 25 KVA DG set, Make : JK/Dunlop	5	Each
77	77	Supply only Fuel actuator with O Ring for 250 KVA DG set,Make : Greaves	1	Each
78	78	Supply only Fuel actuator with O Ring for 100 to 110 KVA DG set,Make : Kirloskar	1	Each
79	79	Supply only Fuel actuator with O Ring for 50 to 70 KVA DG set,Make : Kirloskar	2	Each
80	80	Supply only ignition switch with Key for 110 KVA DG set,Make : Kirloskar	1	Each
81	81	Supply only ignition switch with Key for 40 to70 KVA DG set,Make : Kirloskar	3	Each
82	82	Supply only coolant temperature sensor with guage for 100 KVA to 250 KVA DG set.	2	Each
83	83	Supply only coolant temperature sensor with guage for 15 KVA to 70 KVA DG set.	5	Each
84	84	Supply only Lube oil pressure sensor ( Oil safety control ) for 100 to 250 KVA DG set.	2	Each
85	85	Supply only Lube oil pressure sensor ( Oil safety control ) for 50 to 70 KVA DG set.	3	Each
86	86	Supply only Lube oil pressure sensor ( Oil safety control ) for 30 to 40 KVA DG set.	2	Each
87	87	Supply only Lube oil pressure sensor ( Oil safety control ) for 15 to 25 KVA DG set.	4	Each
88	88	Supply only Hose set with clamps and screws suitable for DG set 250 KVA make: Greaves Ltd.	1	Each
89	89	Supply only Hose set with clamps and screws suitable for DG set 100 KVA to 110 KVA make: Kirloskar.	2	Each
90	90	Supply only Hose set with clamps and screws suitable for DG set 50 to 70 KVA make: Kirloskar.	3	Each
91	91	Supply only Hose set with clamps and screws suitable for DG set 30 to 40 KVA make: Kirloskar.	3	Each
92	92	Supply only Hose set with clamps and screws suitable for DG set 15 to 25 KVA make: Kirloskar.	4	Each
93	93	Supply and replacement of self starter 12 volt dc including testing and commissioning as all specified and directed. Make :- Lucas/Mico	3	Each
94	94	Supply and replacement of self starter 24 volt dc including testing and commissioning as all specified and directed. Make :- Lucas/Mico	1	Each
95	95	Supply and Replacement of battery box made out to shape with angle iron 40x40x 5 mm, size 40cm x40cm x 20cm (Internal ) to arrange existing batteries all as directed.	4	Each
96	96	Supply and Replacement of heavy duty battery terminals Brass with copper lead Pvc insulated multi stranded 25 sq mm duly soldered for +ve and -ve,05 mtr to 1.2 mtr long for 12/ 24 volt batteries.	10	Each
97	97	Supply and fixing heating proof asbestos rope 12 mm dia on engine exhaust pipe including dismantling of burn out asbestors rope and arresting all leakages by welding / tightening the exhaust line including aluminium cladding and making complete fire proof, flame proof all as specified and directed.	100	Kg
98	98	Preparation of old painted surface of the DG Set installed in acuastic enclosure including Base frame, radiator ,Fuel tank etc of the following capacities complete degreasing and spray painting the same with two coats of approved synthetic enamel paint including writing SM/MES nos,Desriptions,Location,Capacity etc on DG set size of letter shall be 5 CMx5CM of capacity 15 KVA to 70 KVA all as directed by Engr in Charge .	3	Each Job
99	99	Preparation of old painted surface of the DG Set including Base frame, radiator, Fuel tank etc of the following capacities complete degreasing and spray painting the same with two coats of approved synthetic enamel paint including writing SM/MES nos,Description,Location,Capacity etc on DG set size of letter shall be 5CMx5CM of capacity 100 KVA to 250 KVA all as directed by Engr in Charge.	3	Each Job
100	100	Supply and replacement of Anti vibration pad as per existing size and make all as directed by Engr-in-charge.	24	Each
101	101	Descaling,Cleaning and pressure testing of radiator assembly as required including Brazing etc complete to make leak proof of capacity 15 KVA to 70 KVA all as directed by the Engr-in-charge.	14	Each
102	102	Descaling,Cleaning and pressure testing of radiator assembly as required including Brazing etc complete to make leak proof of capacity 100 KVA to 250 KVA all as directed by the Engr-in-charge.	3	Each
103	103	Supply & Fix solonoid switch 12 Volts all as specified and and directed	4	Each
104	104	Supply & Fix solonoid switch 24 Volts as specified and and directed	1	Each
105	105	Supply & Fix in replacement/ Topping up of Coolent for radiators as approved by the Engr-In-Charge. Make Bosch	100	Ltrs
106	106	Supply & Fix Oil pressure gauge for 100 KVA to 250 KVA all as specified and and directed	2	Each
107	107	Supply & Fix Oil pressure gauge for 15 KVA to 70 KVA all as specified and and directed.	6	Each
108	108	Supply and Replacement of hour run meter with hour counter.	4	Each
109	109	Supply and filling / Topping up engine oil multi grade as per manufacturers Recommendations in engine all as specified and directed. (Make ELF Oil/ Castrol /HP) including draining out old and burned engine oil.	370	Ltrs
110	110	Overhauling of FIP (Fuel Injection Pump) at work shop including replacement of small spares required,complete setting and pressure testing at work shop to make the FIP and injectors functional for DG set 100 KVA to 250 KVA all as specified and directed.	2	Each Job
111	111	Overhauling of FIP ( fuel injection pump ) at work shop including replacement of small spares required,complete setting and pressure testing at work shop to make the FIP and injectors functional for DG set 15 KVA to 70 KVA all as specified and directed.	5	Each Job
112	112	Supply and Replacement of locks and keys for aquastic enclosures as per samples.	10	Each
113	113	Supply and Replacement of control pannel complete suitable for 15 KVA to 70 KVA DG Set.	2	Each
114	114	Supply and Replacement of AVR (automatic voltage regulator ) suitable for DG set 100 KVA to 250 KVA.	1	Each
115	115	Supply and Replacement of AVR (automatic voltage regulator ) suitable for DG set 50 KVA to 70 KVA.	2	Each
116	116	Supply and Replacement of AVR (automatic voltage regulator ) suitable for DG set 15 KVA to 40 KVA.	5	Each
117	117	M& L for rewinding,varnishing & insulation & drying of AC alternator stator including transportation from site to wksp and back.	250	Per KVA
118	118	M& L for winding, Varnishing and insulation of rotor including trasportation from site to wksp and back.	250	Per KVA
119	119	S& F DG set controller, Model No ACG 543 all as specified and and directed.	2	Each
120	120	S&F fuel hose for any capacity DG set 1 mtr to 2 mtr for fuel tank to DG set all as specified and and directed.	15	RM
121	121	M & labour for calibration of fuel feed pump for any capacity of DG set.	8	Each
122	122	S&F 4 pole power contactor, 415Volts, 60 amps, , incl dismentling taking down unsv one, Make-L&T, Type-ML-3, Cat No-SS90721 or equivelent model of ABB/Schneider	4	Each
123	123	S&F 4 pole power contactor, 415Volts, 100 to 160 amps, , incl dismentling taking down unsv one, Make-L&T, Type-ML-3, Cat No-SS90721 or equivelent model of ABB/Schneider	3	Each
124	124	S& F SMPS 12 vots 10 amp for 15 to 70 KVA DG set	6	Each
125	125	S& F SMPS 24 volts 10 amp 100 to 250 KVA DG set	2	Each
126	126	S&F rectifier diode assembly 15 to 70 KVA DG set	6	Each
127	127	S&F rectifier diode assembly 100 to 250 KVA DG set	3	Each
128	128	Repair of turbocharging with repair Kit 100 to 250 KVA DG set	2	Each
129	129	Repair of turbocharging with repair Kit 15 to 70 KVA DG set	6	Each
130	130	Removing old unserviceable battery charging unit from DG Set of 50 to 70 KVA of any make & supply & fixing battery charging unit 12 volt of the same type with all necessary modifications including all fittings such as pully , belt , cables hardwares etc including fixing testing & commissioning complete all as specified & directed.	1	Each Job
131	131	M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing strip of 25x4 mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI strip 25x4mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.	28	Each Set
132	132	PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of DG set, Panel board, repairs to road cutting, drain, path etc complete all as specified and directed.	16	Cum
133	133	PCC (1:2:4) type B-1 using 20mm graded aggregate a of reconstruction old damaged copings of DG set/ panel etc, including necessary form work complete all as specified and directed.	10	Cum
134	134	Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 16 sqmm 4 core with required aluminium cable lugs.	140	RM
135	135	All as per item No.134 here-in-before but 25sqmm 3,5 core complete all as specified	160	RM
136	136	All as per item No.134 here-in-before but 50sqmm 3.5 core complete all as specified	120	RM
137	137	Supply and fix in repair of air valve and pressure valve of solar water heater	10	Each
138	138	Supply and fix in repair of holding rubber of glass tube of ETC solar water heater. Make : Photon/Tata	10	Each
139	139	Supply and fix in repair of silicon coated glass tube set of ETC solar water heater. Make : Photon/Tata	5	Set
140	140	Supply and fix in repair of silcon coated plate of FPC solar water heater. Make : Photon/Tata	4	Set
141	141	Supply and fix in repair of ETC Solar Glass singleTube with holding rubber, for Hot Water. Make : Photon/Tata	10	Each
142	142	Supply and fix in repair of 100 ltr corrosion resistance insulated tank of Solar Water heater. Make : Photon/Tata	3	Each
143	143	Supply and fix in repair of 200 ltr corrosion resistance insulated tank of Solar Water heater . Make : Photon/Tata	3	Each
144	144	Supply and fix in repair of 300 ltr corrosion resistance stainless steel tank of Solar Water heater . Make : Photon/Tata	3	Each
145	145	Supply and fix in repair of heating element 2 KW to 3 KW for electricity back up	10	Each
146	146	Supply and fix in repair of rubber pipe with clamp dia15 to 20 mm and length 0.5 mtr	16	Each
147	147	Supply and fix in repair of tubular power pack 12 volts, 80 to 100 Ah suitable for solar street light.	7	Each
148	148	Supply and fix in repair of tubular power pack 12 volts, 48 to 70 Ah suitable for solar street light.	6	Each
149	149	Supply and fix in repair of solar battery charging module suitable for 110 wp solar street light pannels.	18	Each
150	150	Supply and fix in repair of LED lamp15 Watt suitable for solar street light.	20	Each

Also Visit

Tenders

Maharashtra Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrification Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Welcome Maintenance To Int Electfication Incl Repair To Geyser Fans And Other Int Accessories At Beg And Centre Tb 1 And Dep Bn And Repair Maint Periodical Services Of Diesel Generating Sets And Solar Security Lights Under Age Em I Of Ge C Kirkee, Kirkee-Maharashtra

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Welcome Maintenance To Int Electfication Incl Repair To Geyser Fans And Other Int Accessories At Beg And Centre Tb 1 And Dep Bn And Repair Maint Periodical Services Of Diesel Generating Sets And Solar Security Lights Under Age Em I Of Ge C Kirkee, Kirkee-Maharashtra

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us