Food Corporation Of India-FCI has published Repairs To Toilet Block Rcc Drain And Flooring Of Mini Iso Shed Etc At Fsd Jamshedpur. Submission Date for this Tender is 20-08-2020. Drainage Tenders in FCI FSD Jamshedpur Jharkhand. Bidders can get complete Tender details and download the document.
| Name of Work: Repairs of toilet block, RCC drain and flooring of mini & ISO shed etc. at FSD Jamshedpur. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. | BI01010001010000000000000515BI0100001113 | 40.5 | Cum |
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | BI01010001010000000000000515BI0100001114 | ||
| 3 | 2.01 | All kinds of soil. | BI01010001010000000000000515BI0100001115 | 291.55 | Cum |
| 4 | 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | BI01010001010000000000000515BI0100001116 | 45.87 | Cum |
| 5 | 4 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | BI01010001010000000000000515BI0100001117 | 800 | Sqm |
| 6 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | BI01010001010000000000000515BI0100001118 | ||
| 7 | 5.01 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size). | BI01010001010000000000000515BI0100001119 | 6.3 | Cum |
| 8 | 5.02 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stoneb aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001120 | 1.82 | Cum |
| 9 | 5.03 | 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001121 | 47.92 | Cum |
| 10 | 5.04 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001122 | 6.33 | Cum |
| 11 | 5.05 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001123 | 34.3 | Cum |
| 12 | 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : | BI01010001010000000000000515BI0100001124 | ||
| 13 | 6.01 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001125 | 98.45 | Cum |
| 14 | 7 | Centering and shuttering including strutting, propping etc. and removal of form for : | BI01010001010000000000000515BI0100001126 | ||
| 15 | 7.01 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | BI01010001010000000000000515BI0100001127 | 931 | Sqm |
| 16 | 7.02 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | BI01010001010000000000000515BI0100001128 | 5.73 | Sqm |
| 17 | 7.03 | Edges of slabs and breaks in floors and walls | BI01010001010000000000000515BI0100001129 | 980 | Sqm |
| 18 | 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. | BI01010001010000000000000515BI0100001130 | ||
| 19 | 8.01 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | BI01010001010000000000000515BI0100001131 | 13180.9 | Kg |
| 20 | 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: | BI01010001010000000000000515BI0100001132 | ||
| 21 | 9.01 | Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001133 | 14.607 | Cum |
| 22 | 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : | BI01010001010000000000000515BI0100001134 | ||
| 23 | 10.01 | Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001135 | 0.38 | Cum |
| 24 | 11 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : | BI01010001010000000000000515BI0100001136 | ||
| 25 | 11.01 | cement mortar 1:4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001137 | 7.2 | Sqm |
| 26 | 12 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. | BI01010001010000000000000515BI0100001138 | ||
| 27 | 12.01 | Cement mortar 1:4 (1 cement :4 coarse sand) | BI01010001010000000000000515BI0100001139 | 19.23 | Sqm |
| 28 | 13 | Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately) | BI01010001010000000000000515BI0100001140 | ||
| 29 | 13.01 | Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. | BI01010001010000000000000515BI0100001141 | ||
| 30 | 13.02 | Area of slab upto 0.50 sqm | BI01010001010000000000000515BI0100001142 | 1.125 | Sqm |
| 31 | 14 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design | BI01010001010000000000000515BI0100001143 | ||
| 32 | 14.01 | Marble work | BI01010001010000000000000515BI0100001144 | 1.125 | m |
| 33 | 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001145 | 31.68 | Sqm |
| 34 | 16 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. | BI01010001010000000000000515BI0100001146 | ||
| 35 | 16.01 | Fixed to steel windows by welding | BI01010001010000000000000515BI0100001147 | 47.25 | Kg |
| 36 | 17 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001148 | 450 | Kg |
| 37 | 18 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. | BI01010001010000000000000515BI0100001149 | ||
| 38 | 18.01 | Using flats 30x6mm for diagonal braces and central cross piece | BI01010001010000000000000515BI0100001150 | 221.61 | Kg |
| 39 | 19 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. | BI01010001010000000000000515BI0100001151 | ||
| 40 | 19.01 | M.S. tube | BI01010001010000000000000515BI0100001152 | 300 | Kg |
| 41 | 20 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. | BI01010001010000000000000515BI0100001153 | 92.34 | Kg |
| 42 | 21 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, ardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | BI01010001010000000000000515BI0100001154 | 399.2 | Sqm |
| 43 | 22 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. | BI01010001010000000000000515BI0100001155 | ||
| 44 | 22.01 | 40 mm wide and 4 mm thick | BI01010001010000000000000515BI0100001156 | 698 | m |
| 45 | 23 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001157 | 36.29 | Sqm |
| 46 | 24 | P/F UVC Rigid PVC pipes - Single socket pipes 75 mm diametre. | BI01010001010000000000000515BI0100001158 | ||
| 47 | 24.01 | 75 mm diameter : | BI01010001010000000000000515BI0100001159 | 42 | m |
| 48 | 24.02 | 110 mm diameter : | BI01010001010000000000000515BI0100001160 | 10 | m |
| 49 | 25 | Providing and fixing unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS : 13592 Type A. | BI01010001010000000000000515BI0100001161 | ||
| 50 | 25.01 | Single tee without door | BI01010001010000000000000515BI0100001162 | ||
| 51 | 25.02 | 75x75x75 mm | BI01010001010000000000000515BI0100001163 | 6 | each |
| 52 | 25.03 | 110x110x110 mm | BI01010001010000000000000515BI0100001164 | 4 | each |
| 53 | 25.04 | Bend 87.5° | BI01010001010000000000000515BI0100001165 | ||
| 54 | 25.05 | 75 mm bend | BI01010001010000000000000515BI0100001166 | 9 | each |
| 55 | 25.06 | 110 mm bend | BI01010001010000000000000515BI0100001167 | 6 | each |
| 56 | 26 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.\n | BI01010001010000000000000515BI0100001168 | 118.8 | Sqm |
| 57 | 27 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | BI01010001010000000000000515BI0100001169 | ||
| 58 | 27.01 | Ridges plain (500 - 600mm) | BI01010001010000000000000515BI0100001170 | 10.5 | m |
| 59 | 28 | 12 mm cement plaster of mix : | BI01010001010000000000000515BI0100001171 | ||
| 60 | 28.01 | 1:6 (1 cement: 6 fine sand) | BI01010001010000000000000515BI0100001172 | 92.43 | Sqm |
| 61 | 29 | 6 mm cement plaster of mix : | BI01010001010000000000000515BI0100001173 | ||
| 62 | 29.01 | 1:3 (1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001174 | 1156.4 | Sqm |
| 63 | 30 | Neat cement punning. | BI01010001010000000000000515BI0100001175 | 690.9 | Sqm |
| 64 | 31 | White washing with lime to give an even shade : | BI01010001010000000000000515BI0100001176 | ||
| 65 | 31.01 | New work (three or more coats) | BI01010001010000000000000515BI0100001177 | 839.5 | Sqm |
| 66 | 32 | Finishing walls with Acrylic Smooth exterior paint of required shade : | BI01010001010000000000000515BI0100001178 | ||
| 67 | 32.01 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001179 | 1020.32 | Sqm |
| 68 | 33 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | BI01010001010000000000000515BI0100001180 | ||
| 69 | 33.01 | Two or more coats on new work | BI01010001010000000000000515BI0100001181 | 12.6 | Sqm |
| 70 | 34 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete | BI01010001010000000000000515BI0100001182 | 1726.62 | Sqm |
| 71 | 35 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. | BI01010001010000000000000515BI0100001183 | ||
| 72 | 35.01 | With cement mortar 1:4 (1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001184 | 345.33 | Sqm |
| 73 | 36 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: | BI01010001010000000000000515BI0100001185 | ||
| 74 | 36.01 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | BI01010001010000000000000515BI0100001186 | 5 | Sqm |
| 75 | 37 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | BI01010001010000000000000515BI0100001187 | ||
| 76 | 37.01 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001188 | 19.96 | Cum |
| 77 | 38 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001189 | ||
| 78 | 38.01 | In cement mortar | BI01010001010000000000000515BI0100001190 | 2.07 | Cum |
| 79 | 39 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: | BI01010001010000000000000515BI0100001191 | ||
| 80 | 39.01 | Asbestos cement sheet | BI01010001010000000000000515BI0100001192 | 100.8 | Sqm |
| 81 | 40 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead | BI01010001010000000000000515BI0100001193 | 54.3 | Sqm |
| 82 | 41 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: | BI01010001010000000000000515BI0100001194 | ||
| 83 | 41.01 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001195 | 4 | each |
| 84 | 42 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : | BI01010001010000000000000515BI0100001196 | ||
| 85 | 42.01 | W.C. pan with ISI marked black solid plastic seat and lid | BI01010001010000000000000515BI0100001197 | 2 | each |
| 86 | 43 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : | BI01010001010000000000000515BI0100001198 | ||
| 87 | 43.01 | Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern | BI01010001010000000000000515BI0100001199 | 3 | each |
| 88 | 44 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | BI01010001010000000000000515BI0100001200 | ||
| 89 | 44.01 | White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001201 | 3 | each |
| 90 | 45 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : | BI01010001010000000000000515BI0100001202 | ||
| 91 | 45.01 | Kitchen sink without drain board | BI01010001010000000000000515BI0100001203 | ||
| 92 | 45.02 | 610x460 mm bowl depth 200 mm | BI01010001010000000000000515BI0100001204 | 1 | each |
| 93 | 46 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. | BI01010001010000000000000515BI0100001205 | ||
| 94 | 46.01 | Flexible pipe | BI01010001010000000000000515BI0100001206 | ||
| 95 | 46.02 | 40 mm dia | BI01010001010000000000000515BI0100001207 | 11 | each |
| 96 | 47 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : | BI01010001010000000000000515BI0100001208 | ||
| 97 | 47.01 | Rectangular shape 453x357 mm | BI01010001010000000000000515BI0100001209 | 3 | each |
| 98 | 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. | BI01010001010000000000000515BI0100001210 | ||
| 99 | 48.01 | 15 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001211 | 20 | m |
| 100 | 48.02 | 25 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001212 | 45 | m |
| 101 | 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. | BI01010001010000000000000515BI0100001213 | ||
| 102 | 49.01 | 15 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001214 | 6 | m |
| 103 | 49.02 | 25 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001215 | 155 | m |
| 104 | 50 | Providing and fixing uplasticised PVC connection pipe with brass unions : | BI01010001010000000000000515BI0100001216 | ||
| 105 | 50.01 | 30 cm length | BI01010001010000000000000515BI0100001217 | ||
| 106 | 50.02 | 15 mm nominal bore | BI01010001010000000000000515BI0100001218 | 25 | each |
| 107 | 51 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. | BI01010001010000000000000515BI0100001219 | 2000 | litre |
| 108 | 52 | Providing and fixing PTMT bib cock of approved quality and colour. | BI01010001010000000000000515BI0100001220 | ||
| 109 | 52.01 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms | BI01010001010000000000000515BI0100001221 | 17 | each |
| 110 | 53 | Providing and fixing PTMT stop cock of approved quality and colour. | BI01010001010000000000000515BI0100001222 | ||
| 111 | 53.01 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | BI01010001010000000000000515BI0100001223 | 23 | each |
| 112 | 54 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. | BI01010001010000000000000515BI0100001224 | ||
| 113 | 54.01 | 25mm nominal bore, weighing not less than 62 gms | BI01010001010000000000000515BI0100001225 | 8 | each |
| 114 | 55 | Cutting holes up to 30x30 cm in walls including making good the same: | BI01010001010000000000000515BI0100001226 | ||
| 115 | 55.01 | With common burnt clay F.P.S. (non modular) bricks | BI01010001010000000000000515BI0100001227 | 12 | each |
| 116 | 56 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of pipes including bed concrete as per standard design : | BI01010001010000000000000515BI0100001228 | ||
| 117 | 56.01 | 110 mm diameter pipe | BI01010001010000000000000515BI0100001229 | 8 | m |
| 118 | 57 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. | BI01010001010000000000000515BI0100001230 | 2 | each |
| 119 | 57.01 | Credit of old GI Sheet | BI01010001010000000000000515BI0100001231 | 201.6 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
