Repair And Renovation Of Nandan Milan Bithi Rakhal Ghosh Road
Tender Value
5.82 Lakhs
Estimated cost
Bid Submission
13 Aug 2020
0 days left
EMD
11654
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajpur Sonarpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Of Nandan Milan Bithi Rakhal Ghosh Road
BOQ
| Name of Work: Repair & Renovation of Nandan Milan Bithi at Rakhal Ghosh Road, Harinavi under Rajpur-Sonarpur Municipality | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Renovation Work | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in\nground floor. | BI01010001010000000000000515BI0100001113 | 20 | sqm |
| 3 | 1.02 | Brick work with 1st class bricks in cement mortar (1:6 ) (b) In superstructure, ground floor | BI01010001010000000000000515BI0100001114 | 10 | cum |
| 4 | 1.03 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety | 8 | cun | |
| 5 | 1.04 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) | 30 | sqm | |
| 6 | 1.05 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor steel/Mild Steel | 0.5 | MT | |
| 7 | 1.06 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]\nii) With 1:4 cement mortar\n(a) 20 mm thick plaster\ni) Ground Floor | 80 | sqm | |
| 8 | 1.07 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal (local) | 0.5 | cum | |
| 9 | 1.08 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made)\n(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm\n(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. | 8.4 | sqm | |
| 10 | 1.09 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (ii) 4 mm thick | 15 | sqm | |
| 11 | 1.1 | M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size,\nfabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.\ni) For trusses spanning up to 12.00 m | 1.2 | MT | |
| 12 | 1.11 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:-\na) With 0.5 mm thick sheet | 120 | sqm | |
| 13 | 1.12 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.\n10-12 Micron thickness Annodizing film Natural white | 52.46 | kg | |
| 14 | 1.13 | for sanitary and plumbing works | 1 | Job | |
| 15 | 1.14 | for Electrical work | 1 | Job | |
| 16 | 1.15 | GST @12% | 1 | item | |
| 17 | 1.16 | Labour Welfare Cess @1% | 1 | item |
AI Tender Summary
Tender Timeline
Aug 06, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 19, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender