Special Repair To Replacement Of Ber Submersible Pumps Vaccum Chlorinator And Motors Including Certain Sanctioned Works Under Ge Af Bamrauli
Tender Value
24.50 Lakhs
Estimated cost
Bid Submission
27 Aug 2020
0 days left
EMD
49000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bamrauli → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Replacement Of Ber Submersible Pumps Vaccum Chlorinator And Motors Including Certain Sanctioned Works Under Ge Af Bamrauli
BOQ
| Name of Work: SPL REPAIR TO REPLACEMENT OF BER SUBMERSIBLE PUMPS, VACCUM CHLORINATOR AND MOTORS INCLUDING CERTAIN SANCTIONED WORKS UNDER GE (AF) BAMRAULI | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply, installation, commissioning and testing submersible pumping set 4 stage electric driven of 30 HP capacity to discharge 19 LPS at operating head range 42-80 mtr head, directly coupled with electric motor, AC 3 Phase, 415 volts, 50 Hz, 2905 rpm with copper wound water proof winding complete with flange adoptor suitable for connection with 125mm dia flanged column pipe and one set of essential tool with price list, literature as recommended by manufacture complete all as specified and directed. Make : KSB (BPHA 333/04D+HBC 303)/Tullu | 5 | Each | |
| 2 | 2 | Supply, installation, commissioning and testing submersible pumping set 4 stage electric driven of 41 HP capacity to discharge 25 LPS at 84 mtr head, directly coupled with electric motor, AC 3 Phase, 415 volts, 50 Hz, 2905 rpm with copper wound water proof winding complete with flange adoptor suitable for connection with 125mm dia flanged column pipe and one set of essential tool with price list, literature as recommended by manufacture complete all as specified and directed. \nMake : KSB (BPHA 384/04D+HBC 413)/ Tullu | 2 | Each | |
| 3 | 3 | Supply and fix high pressure single head adjustable chlorine dosing system including FRP pressure dosing tank of capacity 170 ltrs consisting of water inlet line, outlet with Y strainer, drian, overflow, conical bottom for sludge deposition , pot hole with cover, level gauage with Agitation motor 120 watts 900 RPM, single phase flange mounted motor with plastic shaft and impeller connected to FRP service dosing tank of capaicty 100 lts consisting of water inlet line, Dozing injector 230V, 50Hz including on/off switch and stokes/ Minute of Max 135 Min. 15 with motor, discharge pressure 10Kg/cm, High flow rate of 0-20 LPH including drain, overflow level gauge, inspection port, Agitator motor 120 Watts 900 RPM single phase flange mounted with plastich shaft and impeller including mounting lid, complete all as specified and directed. Make: AQUAFIT | 2 | Each | |
| 4 | 4 | Supply, testing and commissioning of pressure pump of capacity 0.50HP, single phase complete with air tank, pressure control switch, pressure guage, brass assembly etc with all necessaray connection complete all as specified and directed. Make: KSB/ Kirloskar/ Crompton | 1 | Each | |
| 5 | 5 | Supply, testing and commissioning of pressure pump of capacity 1HP, single phase complete with air tank, pressure control switch, pressure guage, brass assembly etc with all necessaray connection complete all as specified and directed. Make: KSB/ Kirloskar/ Crompton | 4 | Each | |
| 6 | 6 | S&F fabrication of rain water shelter cubical compartmentilzed outdoor type suitable for pressure pump set, verically enclosed with PGI sheet having one door for opening/ closing the enclosure, having workable space for connection/ disconnecting of pump motor including PCC/ cement work as required at site complete all as specified and directed. | 5 | Each\nJob | |
| 7 | 7 | Excavation in soft/loose soil trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out complete all as specified and directed. | 18.4 | Cum | |
| 8 | 8 | Returning, filling including spreading, levelling & well ramming in layers not exceeding 25 cm thick as in soft/loose soil complete all as specified and directed. | 12.86 | Cum | |
| 9 | 9 | Removal of surplus spoil to a distance not exceeding 50 mtr depositing where directed at a level not exceeding 1.5 mtr above ground level complete all as specified and directed. | 5.54 | Cum | |
| 10 | 10 | Supply and lay steel water tubing 50mm dia GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete all as specified. Make: Jindal/Prakash/Swastik \n | 36 | RM | |
| 11 | 11 | M&L for cutting of the CI/DI pipe of sizes 150mmin position for insert of new tee, branches such as Tees/Reducers/Tail pieces/collers/sluice valve/Air release valve etc.with suitable size of clamp of size 40 x 6 mm with nuts, bolts and washer complete all as specified and directed. | 1 | Each | |
| 12 | 12 | Supply, fixing, jointing and testing of cast iron sluice valve 150mm dia, class I (ISI MARKED) PN-1 type latest IS 14846-2000 flanged ends, drilled having stainless steel spindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete all as specified and directed. | 1 | Each | |
| 13 | 13 | S&F Gun metal gate valve ISI marked of size 50mm bore with iron wheel head screwed both ends for iron pipes complete all as specified and directed. Make : Zoloto/Seico/Jindal/Upadhaya/Venus | 2 | Each | |
| 14 | 14 | Constuction of valve pit chamber of size 1050mm x 1050mm x 1050mm (internal dimension) complete including excavation and earth work, PCC 1:4:8, type D-2 using 40mm graded stone aggregate, brick work in cement mortar 1:6, plastering in cement mortar 1:4 (internally) and including 3mm thick mild steel sheet cover and painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 1 | Each Job | |
| 15 | 15 | Factory made sheet metal enclosure distribution boards, (protection class IP-42) double door, verticle type suitable for mounting MCCBS/ MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, triple pole and neutral, 12 ways, 415 volts Make Indo Asian/ ABB/legrand\nNote :- MCBs and MCCB shall be measured and paid for separately under respective item of this schedule. | 1 | Each | |
| 16 | 16 | MCCB, four pole, 415 Volt ,125 Amp rating, 35 KA ultimate breaking capacity fixed in DBs catered herein before complete all as specified and directed. | 1 | Each | |
| 17 | 17 | Supply and fix polycarbonate distribution board UV resistant,shock,rust,dust proof, fire retardent, IP-65 protection comprising MCB SP & SPN 12 way , including neutral and earth link front opening 240 volt 50 Htz complete all as specified and directed. | 4 | Each | |
| 18 | 18 | MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs complete all as specified and directed. | 34 | Each | |
| 19 | 19 | MCB, SP, 230 volts, 35 to 63 Amp rating, 10 KA, C series fixed in DBs complete all as specified and directed. | 30 | Each | |
| 20 | 20 | MCB SPN 63 Amp rating 10 KA 230 volt 50 Htz 'C' series fixed in DBs complete all as specified and directed. | 4 | Each | |
| 21 | 21 | Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed. \nNote:- (a) Two runs of 6.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment.\n(b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish. | 220 | RM | |
| 22 | 22 | Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings complete all as specified and directed. \nNote :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iv) Exhaust fan and ceiling fan shall be taken down in under separate item of this schedule. | 150 | Per point | |
| 23 | 23 | M & L for point wiring with PVC insulated, PVC unsheathed cable single core, nominal area 1.5 sq mm FRLS with stranded copper conductor 1100 volts grade drawn into and incl rigid PVC conduit (concealed) 19 mm internal dia with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sq mm unsheathed copper conductor earth wire connected to earth dolly incl CI/MS boxes 1.6 mm thick with two coats of anticorrosive paint outside and aluminum paint inside sunk in wall with 3 mm thick laminated bakelite Hylam/Arkay light brand sheet cover (white) for mounting of switches, sockets and switch sockets, regulators as required complete all as specified and directed for the following complete all as specified and directed. \nNote :- The rates of chase cutting on wall concealing conduit and steel terminal boxes are included in the unit rates.Note- colour code of wire will be strictly followed , Red for Phase , Black for neutral and green for earth wire | |||
| 24 | 23.01 | (a) One light/fluorescent tube light/fan/bell point controlled by one switch single pole one way. | 75 | Per Point | |
| 25 | 23.02 | (b) All as per item No. 23 here-in-before but one 3 pin 5 amp switch socket out let independent . | 30 | Per Point | |
| 26 | 23.03 | (c) All as per item No. 23 here inbefore but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed. | 10 | Per Point | |
| 27 | 23.04 | (d) One 3 pin 5 Amps socket out let independent but below the switch board of light point in the same vertical plane | 5 | Point | |
| 28 | 24 | All as per item No. 23 here-in-before but using 02 Nos. 4.0 sq mm size for main cable and 01 No.4.0 sq mm size as earth conductor for one 16 amp switch socket outlet on independent board. | 30 | Per Point | |
| 29 | 25 | Supply & fix switch piano flush type, single pole one way, 5 Amp. | 118 | Each | |
| 30 | 26 | S&F socket out let 2/3 pin 5 Amps flush type. | 45 | Each | |
| 31 | 27 | S&F socket out let 2 in 1, 3pin5 & 15 Amps flush type. | 30 | Each | |
| 32 | 28 | Supply & fix switch piano flush type, single pole one way, 15 Amp. | 30 | Each | |
| 33 | 29 | S & F ceiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed. | 50 | Each | |
| 34 | 30 | Supply and Fix calling bell AC ding dong 220 volt multi music on wooden board | 1 | Each | |
| 35 | 31 | Supply and fix bell push AC 220 volt single phase | 1 | Each | |
| 36 | 32 | Supply and fix AC starter unit consisting of one 25 Amp capacity starter, one 240 volt 25 Amp 10 KA SPN MCB, one 25 Amp sockets and one 25 Amp plug top prewired of make North west/Anchor/Legrand/complete all as specified and directed. | 6 | Each | |
| 37 | 33 | Supply and fix Fresh air fan, AC, single phase 230 volts of size 250 mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, single core, PVC insulated mulstistranded copper conductor FRLS cable from ceiling rose and making good the disturbed surface with existing colour matching complete. Note :- Fan shall be of Make- Havells Cat part No Ventil Air DX or equivalent model of make as specified in Appendix B to particular specifications. | 1 | Each Job | |
| 38 | 34 | Supply and erecting ceiling fan 1200mm sweep with all standard accessories and necessary materials, erected in provided hook/clamp. Material : ceiling fan : electric Ceiling fan capacity type with double ball bearing complete with capacitor, 300 mm down rod, canopies, shackeles, reel insulator, half threaded bolts of 9.53mm (3/8\") dia 62.5 mm (2-1/2\") to 88mm (3-1/2\") long and 7.94 mm (5/16\") dia 44.5 mm (1-3/4) to 57 mm (2-1/4\") long with nuts, with lock type split pin spring & plate washers etc, three number blade made of Aluminium alloy suitable for single phase, AC 210 volts, 50 Hz supply and conforming to class I to IS : 374/1979 with amendment no 1 to 6 expect for performance parameters to the extent modified as details in general requirements > the down rod shall be capable to withstand a tensile load of 1000 kg without break down and a torsion load of 500 kgcm without breakage as per clause 10.14.1 of IS : 374/1979 with amendment no 1 to 6 Eletrical motor should be single phase permanent capacitor type with no. of pole 12/14/16/18(as per sweep). Class-1 wih basic insulation. class of insulation shall be B class. The binding wire used for fan should be copper wire, synthetic enameled of 30 to 38 SWG. Connection wire : Flat/round two core flexible stranded copper wire cord 23/0.2 mm ISI marked. Paint superior quality enamel paint of specified colour for marked Sr . No and date of erection of 1200mm sweep, maximum input power 50 watts air delivery 215 cubic meter per minute Make CG/Havells/Orient | 15 | Each | |
| 39 | 35 | Wall mounted fan, 450 mm sweep, AC, single phase, 230/240 Volts, fixing on wall all as required and connecting with 3 run of 1.5 sqm single core PVC insulated mulstistranded copper conductor cable from ceiling rose. Note :- Fan shall be make : Havells, model 'V3' or equivalent model of make specified in Appendix 'B' to particular specifications. | 4 | Each | |
| 40 | 36 | supply and fix connecting and testing LED street light 25 watt 6000k new generation energy saving and enviornmental friendly long life versatile pressure die cast aluminium housing IP-66 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with with including grade 40mm dia GI pipe as bracket in appropriate length complete including taking down old light fitting complete all as specified and directed. \nNote - fitting shall be make of Philips/Bajaj/Havells | 6 | Each | |
| 41 | 37 | Supply and fix bulkhead fitting enviornmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulkhead edgelit LED luminaire comprising of highbrightness LEDs of 10 watt crompton complete all as specified and directed. \nMake: Cat part No- LBHP-10-CDL or equivalent of other make Philips/Crompton | 2 | Each | |
| 42 | 38 | Supply and fix LED Tube rod fittings 4 feet long pendent type 40 watt inbuilt driver 240 volt suitable for workshop and industrial purposen extruded aluminium housing provided for efficiant heat dissipation with polycarbonate diffuser and intigrated electronic driver including two nos rod for hanging complete all as specified and directed. \nMake: Bajaj Cat part No-BICDP40W LED Philips/CG | 20 | Each | |
| 43 | 39 | Supply and fix LED batten extruded surface mounting fitting 2 feet long aluminium housing 10 watt input voltage 220 volt inbuilt LED and driver Philips cat part No-BN021LED 10S or equivalent complete all as specified and directed. Make: Bajaj & CG | 4 | Each | |
| 44 | 40 | Supply only LED Tube rod fittings 4 feet long surface / wall mounted LED batten extruded aluminium housing provided for efficiant heat dissipation with polycarbonate diffuser and intigrated electronic driver 20 watt including tube rod complete all as specified and directed. \nMake : Havells cat part Endura liniar BS20WLED830SPCWH or equivelent Philips and crompton greaves. | 27 | Each | |
| 45 | 41 | Supply and fix surface mounted LED down lighter with dome shape opal diffusar suitable for indoor application 240 volt 18watt inbuilt driver Bajaj Cat part No-BGCML18W or equivalent Philips and crompton complete all as specified and directed. . | 16 | Each | |
| 46 | 42 | Earthing complete with Copper earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 20x3 copper strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 25 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. \nNotes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I\n(ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth copper strip and GI pipe for protection of earth strip. Any varriation in quantity shall be adjusted. | 10 | Each set | |
| 47 | 43 | Supply and fix copper strip 20x3 mm on epoxy based insulator duly fixed with suitable size nuts and bolts on wall complete all as specified and directed. | 100 | RM | |
| 48 | 44 | Supply and fix aluminium strip 25x3.15mm with saddle and fixing screws for roof conductor and down conductor above ground complete all as specified and directed. | 50 | RM | |
| 49 | 45 | Supply and fix test point terminal block made of gun metal or phosphorous bronze size 75x75x25 mm drilled and screw including 3 Nos 8mm dia 25mm long hex head screw complete all as specified and directed. . | 10 | Each | |
| 50 | 46 | Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. \nNotes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I\n(ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted. | 5 | Each set | |
| 51 | 47 | Supply and lay river bed sand for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed . | 4 | Cum | |
| 52 | 48 | supply and lay old size brick well burnt, laid flat ,for cable protection complete all as specified and directed. | 430 | Each | |
| 53 | 49 | Supply and laying in trenches of XLPE Insulated galvanised steel strip armoured electric power cables(heavy duty)1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core | 80 | RM | |
| 54 | 50 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
AI Tender Summary
Tender Timeline
Aug 04, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 29, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender