Roof Treatment And Repairing Or Replacement Of False Ceiling , Wall Paneling And Acoustic Treatment Of Officers Club At Amlohri Project .
Tender Value
63.87 Lakhs
Estimated cost
Bid Submission
24 Aug 2020
0 days left
EMD
79900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amlohri → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Roof Treatment And Repairing Or Replacement Of False Ceiling , Wall Paneling And Acoustic Treatment Of Officers Club At Amlohri Project .
BOQ
| Name of Work: | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART A | |||
| 2 | 2 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 66.5 | Cum | |
| 3 | 3 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. | 1445 | Sqm | |
| 4 | 4 | Chipping of unsound/week concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris of debris for all lead and lifts all complete as per direction of Engineer-in-Charge. | 1445 | Cum | |
| 5 | 5 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter | 235 | mtr | |
| 6 | 6 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.110 mm bend | 30 | each | |
| 7 | 7 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.110 mm Shoe | 50 | each | |
| 8 | 8 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm | 150 | each | |
| 9 | 9 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.With cement mortar 1:4 (1cement: 4 coarse sand) | 145 | Sqm | |
| 10 | 10 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Circular tank | 12000 | Liter | |
| 11 | 11 | PART B Civil | |||
| 12 | 12 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. | 300 | Sqm | |
| 13 | 13 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I | 560 | Sqm | |
| 14 | 14 | Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish.Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm.10mm thick | 650 | Sqm | |
| 15 | 15 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 2575 | Sqm | |
| 16 | 16 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer | 1575 | Sqm | |
| 17 | 17 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work | 1575 | Sqm | |
| 18 | 18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work | 246 | Sqm | |
| 19 | 19 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | 1000 | Sqm | |
| 20 | 20 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 1000 | Sqm | |
| 21 | 21 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) | 250 | Sqm | |
| 22 | 22 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar | 17 | Cum | |
| 23 | 23 | Brick work with non modular FALG bricks confirming to IS: 12894, class designation 7.5 average compressive strength etc complete in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement: 6 Coarse sand) | 17 | Cum | |
| 24 | 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). | 13 | Cum | |
| 25 | 25 | Part B Electrical | |||
| 26 | 26 | Providing of LED recessed luminaries, 18W, 6000K, Type of fixture(in feet)-1x1(for 18W) control gear, Recess type, operating voltage-140V to 280V, Rated voltage-230V, 50Hz AC, ISI Mark as per instruction of EIC. | 280 | Nos. | |
| 27 | 27 | Fixing of LED recessed luminaries, 18W, 6000K, Type of fixture (in feet) 1X1(for 18W) with control gear, Recess type, operating voltage-140V to 280V, Rated voltage-230V, 50Hz AC, ISI mark including its connection as per instruction of EIC. (Material required for fixing of said LED recessed luminaries will be provided by the contractor without any additional charge | 280 | Nos. | |
| 28 | 28 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sqmm PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sqm.mm FRLS PVC insulated copper conductor single core cable etc. as required Group A. | 280 | point | |
| 29 | 29 | Part C Civil | |||
| 30 | 30 | Providing and Fixing 15 mm thick densified tegular edged eco friendly lightweight calcium silicate false ceiling tiles of approved texture spintone/cosmos/ Hexa or equivalent of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross \"T\" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thickscrews @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers, grills,light fittings, fixtures, smoke detectors etc., wherever required.Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners,4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main 'T' , bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC. valueof 0.50(Minimum), light reflection > 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity<0.043 w/m 0 KC | 506 | sqm | |
| 31 | 31 | Providing and fixing in position wall panelling at all heights with integral dendsified calcium silicate panales/tiles of size 595X595mm having NRC (Noise reduction coefficient of 0.50 (minimum) as per IS 8225:1987 ,Light reflactance of 85 % (Minimum) ,Non combastible as per BS :476 (Part-4) fire performance as per BS 476 (Part 6 & 7), humidity resistance of 100% thermal conductivity 0.043 w/m k as per ASTM 518:1991 , comprising of a frame made from especially fabricated galvinised mild stone sheet 0.50mm thick pressed section (galvinised @ 120 grams per sqm including both sides ie. vertical studs of size 48x34x36 mm are plased at 600mm center to center in a floor and ceiling channel section of size 50x32m fixed to the floor and soffit at 600mm centers using 12mm dia 50mm long wedge type expended zinc alloy dash fastner with 10mm bolt. this same channels is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid to 600mm x 600mm . glass wool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw of size 13x3.2mm on to this grid living the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicated based compound and fiber joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panneling as per manufacturer specification as per direction of Engineer-in -charge with 15 mm thick fully perforated squre/butt edge light weight calcium/sillicate panels/tiles | 312 | sqm | |
| 32 | 32 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood | 0.7 | cum | |
| 33 | 33 | French spirit polishing :Two or more coats on new works including a coat of wood filler | 281 | sqm | |
| 34 | 34 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : | 855 | sqm | |
| 35 | 35 | Finishing walls with Acrylic Smooth exterior paint of required shade:Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | 1958 | sqm | |
| 36 | 36 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | 880 | sqm | |
| 37 | 37 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) | 170 | sqm | |
| 38 | 38 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 880 | sqm | |
| 39 | 39 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 880 | sqm | |
| 40 | 40 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. | 918 | sqm | |
| 41 | 41 | Part C Electrical | |||
| 42 | 42 | Providing of LED Recessed Luminaries,18w,6000K,Type of fixture (in feet) 1x1 (for 18w) with control gear, Recess type, operating voltage-140v to 280v Rated voltage 230v, 50Hz AC, ISI Mark as per instruction of Engineer-in-charge | 170 | nos | |
| 43 | 43 | Fixing of LED Recessed Luminaries 18w,6000k ,Type of fixture (in feet)-1x1(for 18w) with control gear, Recess type, operating vopltage-140v to 280v, Rated voltage 230v 50Hz AC ISI Mark including its connection as per instruction of Engineer -in-charge (Material required for fixing of said LED Recessed Luminaries will be providid by the contractor without any additional charge | 170 | nos | |
| 44 | 44 | fixing for light point fan point/exhaust point/call bell point with 1.5 sqm PVC insulated copper conductor core cable in surface/recessedmedium class PVC conduit with piano type switch phenolic laminated sheet suitable size MS box and earthing the point with 1.5 sqm FRLS PVC insulated copper conductor single core cable etc as required | 170 | nos | |
| 45 | 45 | Total impact of GST for the purpose of CTC | 1 | Nos |
AI Tender Summary
Tender Timeline
Aug 04, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 25, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender