Annual Rate Contract Of Fabrication Work Repairing Of Existing Various Size Sluice Valve Etc . Under Phed Sub Division Sadulpur City
Tender Value
5 Lakhs
Estimated cost
Bid Submission
10 Aug 2020
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sadulpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Rate Contract Of Fabrication Work Repairing Of Existing Various Size Sluice Valve Etc . Under Phed Sub Division Sadulpur City
BOQ
| Name of Work: Annual Rate Contract of Fabrication Work (Repairing of Existing Various size sluice valve etc.) Under PHED Sub Division Sadulpur City. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern's store own his cost. (BSR_PHED_CHURU_O&M_2019) | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | 80 mm dia (BSR Item No. 5.1.1) | BI01010001010000000000000515BI0100001115 | 1 | Each |
| 3 | 1.02 | 100 mm dia (BSR Item No. 5.1.2) | BI01010001010000000000000515BI0100001115 | 1 | Each |
| 4 | 1.03 | 125 mm dia (BSR Item No. 5.1.3) | BI01010001010000000000000515BI0100001115 | 1 | Each |
| 5 | 1.04 | 150 mm dia (BSR Item No. 5.1.4) | BI01010001010000000000000515BI0100001114 | 1 | Each |
| 6 | 1.05 | 200 mm dia (BSR Item No. 5.1.5) | BI01010001010000000000000515BI0100001116 | 1 | Each |
| 7 | 1.06 | 250 mm dia (BSR Item No. 5.1.6) | BI01010001010000000000000515BI0100001117 | 1 | Each |
| 8 | 1.07 | 300 mm dia (BSR Item No. 5.1.7) | BI01010001010000000000000515BI0100001118 | 1 | Each |
| 9 | 1.08 | 350 mm dia (BSR Item No. 5.1.8) | BI01010001010000000000000515BI0100001119 | 1 | Each |
| 10 | 1.09 | 400 mm dia (BSR Item No. 5.1.9) | BI01010001010000000000000515BI0100001120 | 1 | Each |
| 11 | 2 | Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concern's store own his cost. (BSR_PHED_CHURU_O&M_2019) | BI01010001010000000000000515BI0100001122 | ||
| 12 | 2.01 | 32 mm (BSR Item No. 5.2.1) | BI01010001010000000000000515BI0100001119 | 1 | Each |
| 13 | 2.02 | 50 mm (BSR Item No. 5.2.2) | BI01010001010000000000000515BI0100001123 | 1 | Each |
| 14 | 2.03 | 65 mm (BSR Item No. 5.2.3) | BI01010001010000000000000515BI0100001124 | 1 | Each |
| 15 | 2.04 | 80 mm (BSR Item No. 5.2.4) | BI01010001010000000000000515BI0100001124 | 1 | Each |
| 16 | 2.05 | 100 mm (BSR Item No. 5.2.5) | BI01010001010000000000000515BI0100001124 | 1 | Each |
| 17 | 2.06 | 125mm (BSR Item No. 5.2.6) | BI01010001010000000000000515BI0100001124 | 1 | Each |
| 18 | 2.07 | 150mm (BSR Item No. 5.2.7) | BI01010001010000000000000515BI0100001124 | 1 | Each |
| 19 | 3 | Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department. (BSR_PHED_CHURU_O&M_2019) | |||
| 20 | 3.01 | 32 mm (BSR Item No. 5.3.1) | 1 | Each | |
| 21 | 3.02 | 40 mm (BSR Item No. 5.3.2) | 1 | Each | |
| 22 | 3.03 | 50 mm (BSR Item No. 5.3.3) | 1 | Each | |
| 23 | 3.04 | 65 mm (BSR Item No. 5.3.4) | 1 | Each | |
| 24 | 3.05 | 80 mm (BSR Item No. 5.3.5) | 1 | Each | |
| 25 | 3.06 | 100 mm (BSR Item No. 5.3.6) | 1 | Each | |
| 26 | 3.07 | 125mm (BSR Item No. 5.3.7) | 1 | Each | |
| 27 | 3.08 | 150mm (BSR Item No. 5.3.8) | 1 | Each | |
| 28 | 3.09 | 200mm (BSR Item No. 5.3.9) | 1 | Each | |
| 29 | 3.1 | 250mm (BSR Item No. 5.3.10) | 1 | Each | |
| 30 | 4 | Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job. (BSR_PHED_CHURU_O&M_2019) | |||
| 31 | 4.01 | At Workshop (BSR Item No. 5.4.1) | 1 | (Per Cm. Length of Welding) | |
| 32 | 4.02 | On Site (BSR Item No. 5.4.2) | 1 | (Per Cm. Length of Welding) | |
| 33 | 5 | Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect. (BSR_PHED_CHURU_O&M_2019_5.5) | 1 | Per Kg. | |
| 34 | 6 | Making Hole (only labour charges) by drill machine in MS/ CI/ DI Pipes and Specials. per hole rate. (BSR_PHED_CHURU_O&M_2019) | |||
| 35 | 6.01 | Up to 12 mm) dia. Hole (BSR Item no. 5.6.1) | 1 | Per Hole | |
| 36 | 6.02 | Above 12 mm dia. Hole. (BSR Item no. 5.6.2) | 1 | Per Hole | |
| 37 | 7 | Making of GI Assembly pipe for various sizes including threading, tightening, welding of flange and welding with MS Patti, holes and cable grove making as per required length of 3.00 M/ 6.00 M (Pipse and flangse shall be provided and carting these to workshop by the the department). Length of MS strip will be 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia. in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly Pipes, the firm is liable to transport these to concern's divisional store own his cost. (BSR_PHED_CHURU_O&M_2019) | |||
| 38 | 7.01 | 50 mm (BSR Item no. 5.7.1) | 1 | Each Pipe | |
| 39 | 7.02 | 65 mm (BSR Item no. 5.7.2) | BI01010001010000000000000515BI0100001124 | 1 | Each Pipe |
| 40 | 7.03 | 80 mm (BSR Item no. 5.7.3) | BI01010001010000000000000515BI0100001124 | 1 | Each Pipe |
| 41 | 7.04 | 100 mm (BSR Item no. 5.7.4) | BI01010001010000000000000515BI0100001125 | 1 | Each Pipe |
| 42 | 8 | Supplying of MS Rods for different sizes of sluice valve and should be supplied as according to size of old rods including material and finishing for the following sizes. (BSR_PHED_CHURU_O&M_2019) | |||
| 43 | 8.01 | Sluice Valve Size 80mm (BSR Item no. 5.8.1) | 1 | Each | |
| 44 | 8.02 | Sluice Valve Size 100mm (BSR Item no. 5.8.2) | 1 | Each | |
| 45 | 8.03 | Sluice Valve Size 125mm (BSR Item no. 5.8.3) | 1 | Each | |
| 46 | 8.04 | Sluice Valve Size 150mm (BSR Item no. 5.8.4) | 1 | Each | |
| 47 | 8.05 | Sluice Valve Size 200mm (BSR Item no. 5.8.5) | 1 | Each | |
| 48 | 8.06 | Sluice Valve Size 250mm (BSR Item no. 5.8.6) | 1 | Each | |
| 49 | 8.07 | Sluice Valve Size 300mm (BSR Item no. 5.8.7) | 1 | Each | |
| 50 | 8.08 | Sluice Valve Size 350mm (BSR Item no. 5.8.8) | 1 | Each | |
| 51 | 8.09 | Sluice Valve Size 400mm (BSR Item no. 5.8.9) | 1 | Each | |
| 52 | 9 | Supplying of Chuck Nut for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes. (BSR_PHED_CHURU_O&M_2019) | |||
| 53 | 9.01 | Sluice Valve Size 80mm (BSR Item no. 5.9.1) | 1 | Each | |
| 54 | 9.02 | Sluice Valve Size 100mm (BSR Item no. 5.9.2) | 1 | Each | |
| 55 | 9.03 | Sluice Valve Size 125mm (BSR Item no. 5.9.3) | 1 | Each | |
| 56 | 9.04 | Sluice Valve Size 150mm (BSR Item no. 5.9.4) | 1 | Each | |
| 57 | 9.05 | Sluice Valve Size 200mm (BSR Item no. 5.9.5) | 1 | Each | |
| 58 | 9.06 | Sluice Valve Size 250mm (BSR Item no. 5.9.6) | 1 | Each | |
| 59 | 9.07 | Sluice Valve Size 300mm (BSR Item no. 5.9.7) | 1 | Each | |
| 60 | 9.08 | Sluice Valve Size 350mm (BSR Item no. 5.9.8) | 1 | Each | |
| 61 | 9.09 | Sluice Valve Size 400mm (BSR Item no. 5.9.9) | 1 | Each | |
| 62 | 10 | Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate including material for the following sizes. (BSR_PHED_CHURU_O&M_2019) | |||
| 63 | 10.01 | Sluice Valve Size 80mm (BSR Item no. 5.10.1) | 1 | Each | |
| 64 | 10.02 | Sluice Valve Size 100mm (BSR Item no. 5.10.2) | 1 | Each | |
| 65 | 10.03 | Sluice Valve Size 125mm (BSR Item no. 5.10.3) | 1 | Each | |
| 66 | 10.04 | Sluice Valve Size 150mm (BSR Item no. 5.10.4) | 1 | Each | |
| 67 | 10.05 | Sluice Valve Size 200mm (BSR Item no. 5.10.5) | 1 | Each | |
| 68 | 10.06 | Sluice Valve Size 250mm (BSR Item no. 5.10.6) | 1 | Each | |
| 69 | 10.07 | Sluice Valve Size 300mm (BSR Item no. 5.10.7) | 1 | Each | |
| 70 | 11 | Supplying of MS Rods and Chuck Nut (Complete Set) for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes. (BSR_PHED_CHURU_O&M_2019) | |||
| 71 | 11.01 | Sluice Valve Size 80mm (BSR Item no. 5.11.1) | 1 | Each | |
| 72 | 11.02 | Sluice Valve Size 100mm (BSR Item no. 5.11.2) | 1 | Each | |
| 73 | 11.03 | Sluice Valve Size 125mm (BSR Item no. 5.11.3) | 1 | Each | |
| 74 | 11.04 | Sluice Valve Size 150mm (BSR Item no. 5.11.4) | 1 | Each | |
| 75 | 11.05 | Sluice Valve Size 200mm (BSR Item no. 5.11.5) | 1 | Each | |
| 76 | 11.06 | Sluice Valve Size 250mm (BSR Item no. 5.11.6) | 1 | Each | |
| 77 | 11.07 | Sluice Valve Size 300mm (BSR Item no. 5.11.7) | 1 | Each | |
| 78 | 11.08 | Sluice Valve Size 350mm (BSR Item no. 5.11.8) | 1 | Each | |
| 79 | 11.09 | Sluice Valve Size 400mm (BSR Item no. 5.11.9) | 1 | Each | |
| 80 | 12 | Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm). (BSR_PHED_CHURU_O&M_2019) | |||
| 81 | 12.01 | 2\" dia. Size (50 mm) (BSR Item no. 5.12.1) | 1 | Each Piece | |
| 82 | 12.02 | 2 ½\" size (65 mm) (BSR Item no. 5.12.2) | 1 | Each Piece | |
| 83 | 12.03 | 3\" dia size (80 mm) (BSR Item no. 5.12.3) | 1 | Each Piece | |
| 84 | 12.04 | 4\" dia size (100 mm) (BSR Item no. 5.12.4) | 1 | Each Piece | |
| 85 | 13 | Making Reducer Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia. in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller pipe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm). (BSR_PHED_CHURU_O&M_2019) | |||
| 86 | 13.01 | 2x2 ½ “ dia size (50 x 65 mm) (BSR Item no. 5.13.1) | 1 | Each Piece | |
| 87 | 13.02 | 2 ½ “x 3” dia size (65 x 80 mm) (BSR Item no. 5.13.2) | 1 | Each Piece | |
| 88 | 13.03 | 2”x 3” dia size (50 x 80 mm) (BSR Item no. 5.13.3) | 1 | Each Piece | |
| 89 | 13.04 | 3”x 4” dia size (80 x 100 mm) (BSR Item no. 5.13.4) | 1 | Each Piece | |
| 90 | 14 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils (BSR_PWD_CHURU_2019_1.8) | 1 | Cum |
AI Tender Summary
Tender Timeline
Aug 01, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 11, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender