Essential Work At Food Craft Institute Sumerpur
Tender Value
36.79 Lakhs
Estimated cost
Bid Submission
10 Aug 2020
0 days left
EMD
73580
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bali → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Essential Work At Food Craft Institute Sumerpur
BOQ
| Name of Work: Essential work at food craft Institute Sumerpur | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | BI01010001010000000000000515BI0100001113 | 100.11 | cum |
| 2 | 2 | Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of shuttering - All work up to plinth level using :1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size | BI01010001010000000000000515BI0100001114 | 43.85 | cum |
| 3 | 3 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in :Cement Mortar 1:6 (1-Cement:6-Sand). | BI01010001010000000000000515BI0100001115 | 33.77 | cum |
| 4 | 4 | Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete :75 mm thick with 20 mm thick nominal size | BI01010001010000000000000515BI0100001116 | 74.93 | sqm |
| 5 | 5 | Add extra if finished with a floating coat of neat cement including cement slurry, making of lines or grooves etc. complete. | BI01010001010000000000000515BI0100001117 | 89.8 | sqm |
| 6 | 6 | Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls in :Cement Mortar 1:6 (1-Cement:6-Sand). | BI01010001010000000000000515BI0100001118 | 116.74 | cum |
| 7 | 7 | Dismantling barbed wire or chain link fencing including bending making rolls and stacking within 50 meter lead. | BI01010001010000000000000515BI0100001119 | 45 | Qtl |
| 8 | 8 | P&F double action hydraulic floor spring of approved brand and manufacture to aluminium door shutter confirming to IS : 6315 incl. costof cutting floors as reqd. embedding in floor and cover plate etc. complte as per direction of Engineer in charge. | BI01010001010000000000000515BI0100001120 | 3 | Nos |
| 9 | 9 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make :C.P. Brass Long body, 15 mm nominal bore weight not less than 690 gm.B628 | BI01010001010000000000000515BI0100001121 | 30 | Nos |
| 10 | 10 | P & F Pillar Cocks (IS:8934 Mark) of superior quality and approved make :C.P. Pillar cock, high-neck, 15 mm nominal bore. | BI01010001010000000000000515BI0100001122 | 10 | Nos |
| 11 | 11 | Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25 mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge.Profile 'C' | BI01010001010000000000000515BI0100001123 | 10.98 | Rmtr |
| 12 | 12 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’ Decorative Teak veener both side 35 mm thick shutter | BI01010001010000000000000515BI0100001124 | 2.6 | sqm |
| 13 | 13 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. | BI01010001010000000000000515BI0100001125 | 156.13 | sqm |
| 14 | 14 | Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge. | BI01010001010000000000000515BI0100001126 | 20.73 | Rmtr |
| 15 | 15 | Providing and fixing acoustic false ceiling 13mm thick. As per design with white powder coated zincoliur metal section frame work including wall angle 24x24x 3.5mm to be fixed on the wall & ceiling section made of main runner of 12' length of size 24 x 32.7 x 3.5 mm at 1200mm c/c with cross runner of 600 x 1200 mm c/c the frame work should be suspended by means 3mm soft galvanised suspension circular, rod, clip & rod bracket from the existing ceiling by means of M.S. rawl plug of 12.5 mm dia x 35mm with 6mm dia bolt screw at 1200 mm/cc. The perforated bold band boutique & vinyle laminated tiles made up of gypsum with synthetic fibres of 4' x 2' or 2' x 2' size should be fixed in the suspended frame work as per design & drawing complete in all respect as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001127 | 98.51 | sqm |
| 16 | 16 | Providing and fixing vertical blinds, made out of non woven polyester fabric 85 to 90mm wide of approved shade & design with power coated aluminium channel minium 1\"x1\" system incl. cording set etc. complete as per specification & direction of engineer in charge. | BI01010001010000000000000515BI0100001128 | 99.74 | sqm |
| 17 | 17 | Providing and fixing Anodised Aluminium Curtain rod with Aluminium brackets complete :20 mm dia. | BI01010001010000000000000515BI0100001129 | 21.95 | Rmtr |
| 18 | 18 | S & F of curtain valvet cloth of superior quality, as approved by Engineer incharge | BI01010001010000000000000515BI0100001130 | 43.49 | sqm |
| 19 | 19 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required.1.00 mm thick with zinc coating not less than 275 gm/m2 | BI01010001010000000000000515BI0100001131 | 262.55 | sqm |
| 20 | 20 | Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 Mtr. height in R.S. Joists flats, tees, angles and channels. | BI01010001010000000000000515BI0100001132 | 2825 | Kg |
| 21 | 21 | Cement concrete flooring grade 1 : 2 : 4 (1-cement : 2-coarse sand : 4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete : 50mm thick with 20mm thick nominal size aggregate. | BI01010001010000000000000515BI0100001133 | 127.74 | sqm |
| 22 | 22 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Good quality South Black Above 3601 Cm2 Slabs | BI01010001010000000000000515BI0100001134 | 18.59 | sqm |
| 23 | 23 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. | BI01010001010000000000000515BI0100001135 | 100 | kg |
| 24 | 24 | Providing & laying interlocking terrzo cloured block plastic moulded.80 mm thickness having min. crushing strangth 40 N/mm2 laid over 40 mm thick river sand bed complete as per drawing and approved by Engineer In Charge , Complete with all respect . | BI01010001010000000000000515BI0100001136 | 278.7 | sqm |
| 25 | 25 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead upto 50mtr. and lift upto 1.5Mtr.All Kind of soil | BI01010001010000000000000515BI0100001137 | 15000 | sqm |
| 26 | 26 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. | BI01010001010000000000000515BI0100001138 | 15000 | sqm |
| 27 | 27 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301 | BI01010001010000000000000515BI0100001139 | 3125 | cum |
| 28 | 28 | Carriage of Sand, bajri, ballast, stone, boulders, kankar & gravelly material includind loading & unloading ( MORTH specification : 514.5 table 500.28 )Add for each subsequent Km. Lead above 1 KM. Upto 10 KM. | BI01010001010000000000000515BI0100001140 | 3125 | cum |
| 29 | 29 | Providing and fixing Aluminum sheet 2 mm thick and 150 mm. Wide over expansion joint with fixing rowl plug and aluminum screws as per designs to match the colour shade of the distemper or wall treatment. | BI01010001010000000000000515BI0100001141 | 18.59 | Sqm |
| 30 | 30 | Providing and fixing SILFIL (Armour Board) of 20mm thickness (Thickness Built-up using minimum 10mm thick specifically extruded high Performance sheet) using double side to the casted surface to form the expansion joint.40 mm | BI01010001010000000000000515BI0100001142 | 13.94 | Sqm |
| 31 | 31 | Providing and placing in position suitable PVC water Stops confirming to IS : 12200 for construction/expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete.Serrated with central bulb (225 mm wide, 8.11 mm thick). | BI01010001010000000000000515BI0100001143 | 30.49 | Rmtr |
| 32 | 32 | Supplying and providing of two components poly sulphide sealant containing solid contents, confirming to standard specification and approved compatible primer, for priming vertical faces prior to application of poly sulphide sealant including all labour charges for sealing of expansion joints after drill mixing of two components sealing compound. Cleaning and preparation of expansion joint using wire brush sand papering with emery paper and filing with suitable mechanical means. The work includes raking and cleaning of joints, sticking, debonding tape on bottom of joint, applying primer on edges, using masking tape on edges, providing of sealant and removal of masking tape immediately after providing sealant in joint.To vertical joint between R.C.C. columns, bricks & stone masonary in size 40 mm width and 12 mm depth, including providing back up material (Thermocoal foam) if required. | BI01010001010000000000000515BI0100001144 | 30.49 | Rmtr |
| 33 | 33 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. | BI01010001010000000000000515BI0100001145 | 32.18 | Sqm |
| 34 | 34 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. All work up to plinth level :1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001146 | 5.67 | cum |
| 35 | 35 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. \n('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Tremo Mechanically treated bars | BI01010001010000000000000515BI0100001147 | 850.5 | kg |
| 36 | 36 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish 25mm thick. | BI01010001010000000000000515BI0100001148 | 669.14 | Sqm |
| 37 | 37 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab up to 900 Sq. Cm :(B) 30 mm thick slab. | BI01010001010000000000000515BI0100001149 | 27.88 | Sqm |
| 38 | 38 | P&F waste pipe with all fitting G.I. B Class 40mm | BI01010001010000000000000515BI0100001150 | 12 | Nos |
| 39 | 39 | Providing and erecting direction and place identification retro - reflectorised sign as per IRC:67 made of high intensity grade sheeting exclusive of lettering, border & signs fixed over aluminium sheeting, 2 mm thick fixed on a mild steel angle iron frame 50mmx50mmx6mm supported on mild steel angle iron post 75 x 75 x 6 mm upto the top of sign board, length of post from bottom of sign board is 2.85 m. upto foundation level post duly painted in black and white synthetic enamel alternate ship 30cm. wide fixed to the ground by means properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60 Cm , 60 Cm below ground level as per approved drawing & as per MORTH specifications clause 801. Double Post 180 cm. X 120 cm. | BI01010001010000000000000515BI0100001151 | 5 | Nos |
| 40 | 40 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter. All kinds of soil. | BI01010001010000000000000515BI0100001152 | 60 | Cum. |
| 41 | 41 | Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of shuttering - All work up to plinth level using :1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size | BI01010001010000000000000515BI0100001153 | 3 | Cum. |
| 42 | 42 | Brick masonary in foundation and plinth with bricks of class designation 75 mm. IS 2212-1991 in : Cement Mortar 1:4 (1-Cement:4-coarse sand). | BI01010001010000000000000515BI0100001154 | 14 | Cum. |
| 43 | 43 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finish 20mm thick. | BI01010001010000000000000515BI0100001155 | 56 | Sqm. |
| 44 | 44 | Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete IS 2571-1970 : 50 mm thick with 20 mm thick nominal size aggregate. | BI01010001010000000000000515BI0100001156 | 13 | Sqm. |
| 45 | 45 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.110 mm dia | BI01010001010000000000000515BI0100001157 | 300 | Rmt. |
| 46 | 46 | Supplying and fixing Ferro cement cover with CI frame for chamebrs & man holes IS5961-1970 Rectagular shape 600x450mm, to withstand 3 MT center point load & minimum unfractured load of 1MT (light duty) | BI01010001010000000000000515BI0100001158 | 12 | Nos. |
| 47 | 47 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS:2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe : 200 mm dia Nominal bore. | BI01010001010000000000000515BI0100001159 | 90 | Rmt. |
| 48 | 48 | Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. 200 mm Nominal Bore. | BI01010001010000000000000515BI0100001160 | 20 | Rmt. |
| 49 | 49 | Supply of ERW M.S. black casting pipe ISI marked (IS:4270/1992) of grade Fe 410 of following sizes at site of work. 200 mm nominal bore | BI01010001010000000000000515BI0100001161 | 50 | Rmt. |
| 50 | 50 | Supplying and installation of 32 mm dia G.I. pipe medium class ISI marked in 3m length including all accessories and fittings required for installation of hand pump. | BI01010001010000000000000515BI0100001162 | 2.5 | Rmt. |
| 51 | 51 | Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 100mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. -inside size 450 x 450mm upto depth of 0.5m & 15Kg CI cover with frame | BI01010001010000000000000515BI0100001163 | 15 | Nos. |
| 52 | 52.01 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.\n(a) Coupler | BI01010001010000000000000515BI0100001164 | 50 | Nos. |
| 53 | 52.02 | (b) Bend 87.5 Dg. | BI01010001010000000000000515BI0100001165 | 30 | Nos. |
| 54 | 52.03 | (c) Bend 45 Dg. | BI01010001010000000000000515BI0100001166 | 30 | Nos. |
| 55 | 52.04 | (d) Pipe Clip | BI01010001010000000000000515BI0100001167 | 150 | Nos. |
| 56 | 52.05 | (e) Double tee with door | BI01010001010000000000000515BI0100001168 | 20 | Nos. |
| 57 | 52.06 | (f) Single Tee | BI01010001010000000000000515BI0100001169 | 30 | Nos. |
| 58 | 53.01 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make on surface ISI marked ( IS:14927 P - II ) PVC casing capping & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.\n(a) Short point (up to 3 mtr.) | BI01010001010000000000000515BI0100001170 | 15 | Point |
| 59 | 53.02 | (b) Medium point (up to 6 mtr.) | BI01010001010000000000000515BI0100001171 | 50 | Point |
| 60 | 54 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make on surface ISI marked (IS:14927 P - II) PVC casing capping & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. On board | BI01010001010000000000000515BI0100001172 | 25 | Point |
| 61 | 55 | S&F following sizes of ISI marked ( IS:14927 P - II ) PVC casing capping along with accessories like coupler, inner, outer, elbow, square box, tee etc. on surface with screws, expansion fasteners as required. 20 mm x 12 mm | BI01010001010000000000000515BI0100001173 | 100 | mtr |
| 62 | 56 | P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm Sweep 5 Star rated | BI01010001010000000000000515BI0100001174 | 60 | Nos |
| 63 | 57 | P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required.450 mm sweep(900/1400 RPM) Almonard, CG, Khaitan, Bajaj, Usha, EPC, Remi, Havell's, Orient,Polar | BI01010001010000000000000515BI0100001175 | 12 | Nos |
| 64 | 58 | P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required.300 mm sweep(900/1400 RPM) Almonard, CG, Khaitan, Bajaj, Usha, EPC, Remi, Havell's, Orient,Polar | BI01010001010000000000000515BI0100001176 | 10 | Nos |
| 65 | 59 | P & F energy efficient / energy saving direct fit (Retrofit) composite self ballasted compact fluorscent lamp (CFL) with PF >0.85 in existing holder / fixture as required. 18/20 Watt | BI01010001010000000000000515BI0100001177 | 5 | Nos |
| 66 | 60 | Supply & Stacking good earth at site complete including loading unloading and transportation etc. | BI01010001010000000000000515BI0100001178 | 488 | Cum. |
| 67 | 61 | Supply of different sized earthen pots at site/store including loading unloading and transportation etc. complete :Earthen pot 300mm size | BI01010001010000000000000515BI0100001179 | 200 | Nos |
| 68 | 62 | Supply of different size Tokaras / Tokaries etc. at store complete :Small size (450mm dia) | BI01010001010000000000000515BI0100001180 | 20 | Nos |
| 69 | 63 | Supply of different varieties of tree / shrubs / climbers according to height and age of the plant at site including loading/unloading and transportation etc. complete.Different flowing plant 900mm to 1500mm. | BI01010001010000000000000515BI0100001181 | 300 | Nos |
| 70 | 64 | Supply of different varieties of Rose plants in polyethylene bag/ earthen pots according to height growth and age of plant at site including loading/ unloading and transportation etc. complete.Different varieties of Grafted Rose plant. | BI01010001010000000000000515BI0100001182 | 100 | Nos |
| 71 | 65 | Supply of different varieties of palms in polyethylene bags/ earthen pots according to height growth and age of plant at site including loading/ unloading and transportation etc. complete. | BI01010001010000000000000515BI0100001183 | 30 | Nos |
| 72 | 66 | Supply of different varieties of palms in polyethylene bags/ earthen pots according to height growth and age of plant at site including loading/ unloading and transportation etc. complete. | BI01010001010000000000000515BI0100001184 | 30 | Nos |
| 73 | 67 | Synthetic Material (PTMT) bib cock of approved quality / make, nominal bore 15 mm, 86 mm long. Long Body, 175 mm long. | BI01010001010000000000000515BI0100001185 | 30 | Nos |
| 74 | 68 | Providing and fixing Polyethylene – Aluminium – Polyethylene (PE-AL-PE) Composite Pressure Pipe U.V. stablised with carbon black conforming to ASTMF – 1282 – 1995 for water supply including trenching and refilling etc. (External Work).2025 (25 mm OD) pipe | BI01010001010000000000000515BI0100001186 | 250 | Rmtr |
AI Tender Summary
Tender Timeline
Jul 30, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 11, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender