Improvement Of Tourist Facility At Pong Dam Distt. Kangra (H.P.) Under Nai Rahen Nai Manzilen Conversion Of 5 Nos Existing Swiss Tents Accommodation Into Cottages Of Camping Site At Pong Dam Distt Kangra (H.P.) Sub Head : Improvement Of Camping Site By, Pong Dam Ditrict Kangra-Himachal Pradesh

TDR : 25017027

Tender Notice
BOQ

Expired

Pong Dam Ditrict Kangra , Himachal Pradesh

Tender Brief : Improvement Of Tourist Facility At Pong Dam Distt. Kangra (H.P.) Under Nai Rahen Nai Manzilen Conversion Of 5 Nos Existing Swiss Tents Accommodation Into Cottages Of Camping Site At Pong Dam Distt Kangra (H.P.) Sub Head : Improvement Of Camping Site By

Document Fees
₹ 1200 /-

EMD
₹ 116000.0 /-

Tender Value
₹ 57.89 Lakhs /-

Submission Date
07-08-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Improvement of Tourist facility at Pong Dam Distt. Kangra (H.P.) Under \" NAI RAHEN NAI MANZILEN\" Conversion of 5 Nos existing Swiss tents accommodation into cottages of camping site at Pong Dam Distt Kangra (H.P.) Sub Head : Improvement of camping site by converting existing tents into permanent cottage, extention of restaurant and kithcen and landscaping and boundary wall.
1	1	Excavation in foundations, trenches etc., in earth work, in all kinds of soil such as pick work, jumper work, blasting/ chiseling/wedging out of soft/hard rock in all depths including pumping and bailing out water and stacking the excavated in specified manner clear from the edge of the excavation and then returning the stacked soil in 15 cm. layers, foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge	BI01010001010000000000000515BI0100001113	65.69	Per Cubic metre.
2	2	Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all height of propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work including carriage of materials in all leads and lifts. a) Foundation, footings, basis of columns and mass concrete.	BI01010001010000000000000515BI0100001114	64.96	Per Square metre.
3	3	b) Flat surfaces such as soffits and suspended floor, roofs landing and like plain upto 200 mm in thickness.	BI01010001010000000000000515BI0100001115	66.88	Per Square metre.
4	4	c)Vertical surface such as wall (any thickness partitions and the like including attached pilasters, plinth and string course of the like.	BI01010001010000000000000515BI0100001116	18.32	Per Square metre.
5	5	d) Beams, cantilever, girders and lintel:- Side of soffits of beam, beams haunching cantilevers bressumers and not exceeding 1 meter in depth in all heights from floor	BI01010001010000000000000515BI0100001117	173.01	Per Square metre.
6	6	e) Columns, pillars, posts and struts square, rectangular in plain.	BI01010001010000000000000515BI0100001118	134.75	Per Square metre.
7	7	f) Stair cases ( except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.	BI01010001010000000000000515BI0100001119	13.68	Per Square metre.
8	8	Providing and laying cement concrete 1:4:8 (1cement: 4sand:8 graded stone aggregate 25 mm nominal size) and curing complete excluding cost of form work in foundation and plinths including carriage of materials in all lead and lifts.	BI01010001010000000000000515BI0100001120	20.23	Per Cubic metre.
9	9	Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials in all lead and lift. a) Foundation footing, bases of columns & like & mass concrete.	BI01010001010000000000000515BI0100001121	12.69	Per Cubic metre.
10	10	Providing and laying cement concrete 1:1.5:3 (1cement: 1.5 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials in all leads, lifts and upto all heights. a) Foundation, footings, basis of columns and mass concrete.	BI01010001010000000000000515BI0100001122	20.75	Per Cubic metre
11	11	b) columns, pillars, posts and struts circular or rectangular in plan.	BI01010001010000000000000515BI0100001123	12.12	Per Cubic metre.
12	12	c) Suspended floors, roofs, landings, shelves and their supports balconies beams, girders bressumers and cantilevers.	BI01010001010000000000000515BI0100001124	27.65	Per Cubic metre.
13	13	d) Staircase (except spiral stair cases) excluding landing but including preparing of the surfaces and finishing of nosing.	BI01010001010000000000000515BI0100001125	3.73	Per Cubic metre.
14	14	Providing mild steel/tor steel reinforcement for RCC work including bending, binding also cost of binding wire and placing in position complete upto all floor level including carriage of materials in all lead and lifts. (Tor Steel TATA/SAIL Make)	BI01010001010000000000000515BI0100001126	4594.24	Per Kilo gramme
15	15	Brick work using common burnt clay building bricks in superstructure in cement mortar 1:6 (1cement:6sand) 2nd class bricks including carriage of materials in all lead and lift and upto all depth/ heights.	BI01010001010000000000000515BI0100001127	94.24	Per Cubic metre.
16	16	Half brick masonry in common burnt clay building bricks 2nd class in superstructure in cement mortar 1:4 (1cement:4sand) including carriage of materials in all leads, lifts and upto all heights.	BI01010001010000000000000515BI0100001128	25	Per Square metre
17	17	Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1cement:6sand:12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6 (1 cement:6sand) including carriage of materials in all leads, lifts and upto all height in breast and retaining walls.	BI01010001010000000000000515BI0100001129	18	Per Cubic metre.
18	18	20 mm cement concrete topping 1:2 to 3(1 cement: 2 to 3 stone\naggregate of size 4.75 mm and below, by volume) laid over and finished monolithic with base concrete including carriage of materials in all leads, lifts and upto all height in breast and retaining walls.	BI01010001010000000000000515BI0100001130	11.5	Per Square metre
19	19	Providing and fixing 6 mm thick commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all lead and lifts, kit ply/ green/ black cobra.	BI01010001010000000000000515BI0100001131	50	Per Square metre.
20	20	Providing and fixing plain particle board ceiling of approved quality with butt jointing and nails upto all heights(frame work cover fillets to be paid for separately) including carriage of materials within all leads and lifts. a) 6 mm thick cement bonded particle board.	BI01010001010000000000000515BI0100001132	194	Per Square metre.
21	21	Supplying and fixing new wooden beads (fillets) whereever necessary 1st class teak wood beads including carriage of materials in all lead and lifts.	BI01010001010000000000000515BI0100001133	100	Per Running metre.
22	22	Providing and fixing cup board by using 19 mm water proofing and anti termite board of approved manufacture Kit ply/ Green ply/ Marino make (As per drawing ) and direction of Engineer in Charge for shutters, vertical and horizontal partitions (teak board) etc. and fixing 6 mm thick water proof ply backing, painting/polishing, Ist class deodar wood beading, moulding, brass handles, cachers M.S. piano hinges and backing with 4 mm thick ply sheet complete and as per the direction of the Engineer-in-Charge including carriage of materials in all leads and lifts .( only length and hight to be measured)	BI01010001010000000000000515BI0100001134	25	Per square Metre
23	23	Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws etc. All complete as per architectural drawings and the directions of Engineer-In-Charge including carriage of material in all leads and lifts of Jindal/Hindalco make. a) For doors windows and ventilators and glazed partitions frames.	BI01010001010000000000000515BI0100001135	430.1	Per Per Kilogramme.
24	24	b) For shutters of doors and windows including providing and fixing hinges/ pivots and making provision for fixing of fittings/ pivots and making provision for fixing of fittings wherever required including the cost of gasket as required.	BI01010001010000000000000515BI0100001136	541.76	Per Per Kilogramme.
25	25	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ Neoprene gaskets etc. complete as per architectural drawings and direction of th Engineer in Charge including carriage of materials in all lead, lift and heights. a) Glazaing with glass panes of 5.50 mm thickness (weight not less than 13.75 Per Kilogramme./ Sq. mtrs. Modiguard / Saint gobain make.	BI01010001010000000000000515BI0100001137	67.11	Per Square metre.
26	26	P/F toughened glass door and fixed glazing with SS patch fittings of approved make. Including Complete as per drawings.Fixed glass ( toughened) 10 mm thick as per direction of the Engineer in charge including carriage of material in all lead and lifts. (Saint Gobian / Modi Guard)	BI01010001010000000000000515BI0100001138	32.85	Per Square metre.
27	27	Providing and fixing bright finished aluminium sliding door bolts with nuts and screws etc. complete including carriage of materials in all leads and lifts, Everlite/ kitch Paragon/Flora make. a) 250x16 mm	BI01010001010000000000000515BI0100001139	10	Each
28	28	Providing and fixing bright finished brass handle of Paragon/ Flora/kitch/everest make with screws etc. complete including carriage of materials in all leads and lifts. a) 125 mm	BI01010001010000000000000515BI0100001140	40	Each
29	29	b) 100 mm	BI01010001010000000000000515BI0100001141	50	Each
30	30	Providing and fixing aluminium tower bolts paragon/floora/kitch/everest (barrel type) anodized transparent or dyed to required shade with screw etc. complete including carriage of materials in all leads and lifts. a) 150x10 mm	BI01010001010000000000000515BI0100001142	110	Each
31	31	b) 100x10 mm	BI01010001010000000000000515BI0100001143	14	Each
32	32	Providing and fixing bright finish hard drawn hook and eyes, 150 mm size (I.S.I. make) Heavy duty including carriage of materials.	BI01010001010000000000000515BI0100001144	40	Each
33	33	Providing and fixing ACP composite panel sheet asapproved by the Engineer in Charge for door shutters including carriage of materials in all leads lifts and heights.	BI01010001010000000000000515BI0100001145	10.41	Per Square metre.
34	34	Providing and fixing 100 mm bright finished brass door stopper with rubber cushion and screws etc.complete (I.S.I. make) heavy duty, including carriage of materials in leads and lifts.	BI01010001010000000000000515BI0100001146	10	Each
35	35	Providing and fixing door closer of approved brand and manufacture (conforming to IS 6315) complete as per the direction of Engineer-In-Charge including carriage of materials in all leads lifts and heights.	BI01010001010000000000000515BI0100001147	5	Each
36	36	Providing and fixing bright finished brass 100mm mortice latch & lock with pair of handles & lever with necessary screws complete including carriage of materials in all leads and lifts.Godrej/ Everlite make.	BI01010001010000000000000515BI0100001148	5	Each
37	37	Providing and fixing 8 to 10 mm thick anti skid water proof stain and impact resistant heavy duty vitrified tiles Kazaria/ Nitco make 600x600x10 mm of approved shade and quality in floors laid over 12 mm thick cement mortar 1:3 (1cement:3sand) jointed with cement slurry mixed with pigment as required complete. (Basic rate not less than Rs.75/- per Sq.ft.).	BI01010001010000000000000515BI0100001149	230.25	per square metre.
38	38	Providing and laying Duro stone vetrified tiles Nitco /RAK /Kajaria 8 to 10 mm thick anti skid water proof stain and impact resistant heavy duty vitrified tiles Kazaria/ Nitco make or equivalent as per appoved by the Engineer in Charge 600x600x8 mm of approved shade and quality in floors laid over 12 mm thick cement mortar 1:3 (1cement:3sand) jointed with cement slurry mixed with pigment as required complete. (Basic rate not less than Rs.75/- per Sq.ft.).	BI01010001010000000000000515BI0100001150	125.95	per square metre.
39	39	White glazed tiles in skirting, risers of steps and dado laid over 12 mm thick cement mortar 1:3 (1cement:3sand) and jointed with cement slurry including carriage of materials in all lead and lifts and heights. 300 mm x 300 mm x 6 mm to 8 mm thick Nitco/Kajaria makeor equivalent as per appoved by the Engineer. (Basic rate not less than Rs.35/- per Sq.ft.).	BI01010001010000000000000515BI0100001151	18.48	per square metre.
40	40	Marble work (table rubbed and polished for walls lining) Veneer work 2.50cm. thick in cement mortar 1:3 (1 cement:3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade White makrana marble complete including carriage of materials in all leads and lifts.	BI01010001010000000000000515BI0100001152	6.51	per square metre.
41	41	Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm thick inter locking blocks (NTC Make)	BI01010001010000000000000515BI0100001153	300	per square metre.
42	42	Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coated including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charges. (Tata/Century wells make or equivalent ) including carriage of materials in all lead, lift and height.	BI01010001010000000000000515BI0100001154	495.25	Per Square metre.
43	43	Providing and fixing ridges or hips 60 cm overall with 0.60 mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charges including carriage of materials in all lead, lift and height (Tata/Century wells make or equivalent ).	BI01010001010000000000000515BI0100001155	110.2	Per Running metre.
44	44	Providing and fixing flashing 38 cm overall with 0.60 mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia meter & prepainted G.I. limpet & bitumen washer complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of materials in all lead, lift and height (Tata/Century wells makeor equivalent )	BI01010001010000000000000515BI0100001156	19.15	Per running metre.
45	45	Providing and fixing M.S. BP Sheet cold rolled 1.66mm to 2mm thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) including carriage of materials in all lead and lifts.	BI01010001010000000000000515BI0100001157	161.32	Per Square metre.
46	46	Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of materials in all lead lifts and height. a) In trusses and trussed purlins in building	BI01010001010000000000000515BI0100001158	157.88	Per Quintal
47	47	b) In gratings framed guard, bars, ladders, railings brackets and similar works	BI01010001010000000000000515BI0100001159	10	Per Quintal
48	48	Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand to give an even shade including cleaning the surface of all dirt, dust and other foreign matters including carriage of materials in all lead and lift. a) White/other than white enamel paint.	BI01010001010000000000000515BI0100001160	386.75	Per Square metre
49	49	Applying one coat of Acrylic washable emulsion spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting and foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001161	462.05	Per Square metre.
50	50	Applying one coat of Acrylic primer (spectrum or equivalent of super qulaity) on new concete/ masonry/ plastered surfaces by throughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete including carriage of materials in all lead and lifts.	BI01010001010000000000000515BI0100001162	785.58	Per Square metre.
51	51	15 mm cement plaster in single coat on fair side/ rough side of brick/concrete/stone wall for interior plastering in all floor level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 (1cement:4sand) including carriage of materials in all leads and lifts and heights.	BI01010001010000000000000515BI0100001163	930.85	Per Square metre.
52	52	20 mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finishing even and smooth in cement Mortar 1:6 (1cement : 6sand) including carriage of materials in all leads and lifts.	BI01010001010000000000000515BI0100001164	100	Per Square metre.
53	53	Poingting on brick work with cement mortar 1:3 (1 cement:3 sand) Flush pointing including carriage of materials in all leads and lifts and heights.\n	BI01010001010000000000000515BI0100001165	78.92	Per Square metre.
54	54	Applying Birla white wall care putty J.K./Birla or equivalent over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials in all lead and lifts.	BI01010001010000000000000515BI0100001166	489.41	Per Square metre.
55	55	Finishing wall with weather proof exterior grade emulsion of Asian/Apex or Nerolac make and colour on undecorated wall surface two or more coats to give an even shade and final finish after thoroughly cleaning of the surface of all dust dirt droppings and other foreign matter including carriage of materials in all lead, lifts and height.	BI01010001010000000000000515BI0100001167	477.56	Per Square metre.
56	56	Demolition of brick work above ground level upto floor two level and above including stacking of serviceable materials and disposal of un-serviceable materials within all lead and lifts through manual and mechanical means.	BI01010001010000000000000515BI0100001168	7.9	Per Cubic metre.
57	57	Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within all lead including carriage of materials as per the direction of the Engineer-in-Charge.(a) Not exceeding 3.00 per square metre. In area	BI01010001010000000000000515BI0100001169	5	Each
58	58	Dismantling of tiled wall tile and floor tiles laid in mortar up to floor two level and above including stacking of serviceable materials and disposal of un-serviceable materials through manual and mechanical means with in all leads and lifts as per the direction of the Engineer-in-Charge	BI01010001010000000000000515BI0100001170	31	Per Square metre.
59	59	Taking out WC, wash basin, soap tray, taps, basin/ wall mixers complete all asseccries and same handed over to Engineer In Charge including stacking useful materials as directed and disposal of unserviceable matreials with in all leads and lifts.	BI01010001010000000000000515BI0100001171	5	Each
60	60	PART B(W.S.& S.I.) Providing & fixing to wall ceiling and floor galvanized mild steel tube (Heavy grade) tube fittings and clamps including making good the wall ceiling and floor and carriage of material in all lead & lift.( Tata /Jindal Make) 15 MM Dia	BI01010001010000000000000515BI0100001172	70	Per Running Metre
61	61	Providing & fixing PVC D-plast / finolex ventilating pipes fixed with approved adhesive including carriage of material in all lead and lifts.75mm Dia	BI01010001010000000000000515BI0100001173	12	Per Running Metre
62	62	Providing & fixing PVC D-plast / finolex ventilating pipes fixed with approved adhesive including carriage of material in all lead and lifts110 MM dia	BI01010001010000000000000515BI0100001174	12	Per Running Metre
63	63	Providing & fixing PVC D-plast / finolex fixed with approved adhesive and accessories including carriage of material in all lead and lifts. Bends of required degree (any radius) Door Bend 75MM Dia	BI01010001010000000000000515BI0100001175	8	Each
64	64	Door Bend 110MM Dia	BI01010001010000000000000515BI0100001176	8	Each
65	65	Plain Bend 75 MM Dia	BI01010001010000000000000515BI0100001177	8	Each
66	66	Plain Bend 110 MM Dia	BI01010001010000000000000515BI0100001178	8	Each
67	67	Collar 75 MM Dia	BI01010001010000000000000515BI0100001179	4	Each
68	68	Collar 110 MM Dia	BI01010001010000000000000515BI0100001180	4	Each
69	69	Providing & fixing 1100x 75mm nominal dia PVC floor trap D-Plast / Finolex of self cleansing design with grating without vent arm complete including cost of cutting & making good the walls & floors including carriage in all lead and lifts.	BI01010001010000000000000515BI0100001181	7	Each
70	70	Providing and fixing studio set Jaquar make Solo series Cat No.- 6853S, 6851P, 6851S wash down water closet (European type W.C. pan) with integral “P” or “S” conversion bend, seat cover premilina, cisteren with fittings complete or equivalent Series of Cera/ Hindware or approved by Engineer in Charge in all respect including jointing the trap with soil pipe in cement mortar 1:1 (1cement:1sand) of pastel including carriage of material in all leads & lifts.	BI01010001010000000000000515BI0100001182	2	Each
71	71	Providing and fixing snow white viterous Urinal Jaquar make Cat No. 13255 or equivalent Series of Cera/ Hindware with all fitting or approved by Engineer in Charge such as unions, clamps etc.(all in C.P. brass) including cutting of holes and making good the same 15mm nominal bore (confirming to BIS Specification	BI01010001010000000000000515BI0100001183	1	Each
72	72	Providing and fixing white vitreous china wash basin with pedestal Cera Make Cat No. 1CNS-WHT-801, CNS-WHT-801 with single hole for pillar tap or equivalent Series of Hindware / Jaquar make with C.I. or M.S. brackets painted white including cutting hole and making good the same including carriage of materials in all lead and lifts.	BI01010001010000000000000515BI0100001184	2	Each
73	73	Providing & fixing C.P. brass angle valve 15mm bore Juquar make Cat No.5053N or equivalent series of Jal /Cera make or approved by Engineer in Charge including carriage of materials in all lead and lifts.	BI01010001010000000000000515BI0100001185	30	Each
74	74	Providing and fixing C.P. wall mixer Jaquar make Cat No.5053N or equivalent seires of Jal Cera or approved by Engineer in Charge including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001186	5	Each
75	75	Providing and fixing C.P. basin mixer Jaquar make cat No.5167NB or equivalent seires of Jal Cera or approved by Engineer in Charge including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001187	2	Each
76	76	Providing and fixing C.P. basin mixer Jaquar make cat No.39001B or equivalent seires of Jal Cera or approved by Engineer in Charge including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001188	3	Each
77	77	Providing and fixing Soap tray Jaquar make Cat No. AQN-CHR-7731 or equivalent series of Jaquar /Cera make or approved by Engineer in Charge including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001189	6	Each
78	78	Providing and fixing C.P. towel ring Jal make cat No. AQN-CHR-1121N or equivalent series of Jaquar /Cera make including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001190	6	Each
79	79	Providing and fixing C.P. brass towel rack Jaquar make Cat No. AQN-CHR-7781B complete approved by Engineer in Chargewith C.P. brass brackets fixed with wooden PVC plugs with C.P. brass screws including carriage of materials in all lead and lifts.	BI01010001010000000000000515BI0100001191	6	Each
80	80	Providing and fixing C.P. shower arm holder jaquar make Cat No. SHA-483 OHS-1709 or equivalent series to Cera/ Jal makeapproved by Engineer in Charge including carriage of materials in all leads and lifts,	BI01010001010000000000000515BI0100001192	5	Each
81	81	Providing and fixing stainless steel hanger /Hook of approved make by Engineer in Charge including carriage of materials in all leads and lifts.	BI01010001010000000000000515BI0100001193	6	Each
82	82	Providing & fixing looking mirror 600x450mm 4mm thick superior glass of approved make with backing of 6 mm A.C. sheet & deodar wood frame work fixed with rawl plug & C.P. brass screws & washer as per approved brand of Architect/ Site Engineer ncluding carriage of materials in all lead and lifts.	BI01010001010000000000000515BI0100001194	6	Each
83	83	Fixing of wash down water closet (European type WC pan) with integral P or S conversion bend, seat cover complete with all necessary fittings.	BI01010001010000000000000515BI0100001195	6	Each
84	84	Fixing of wash basin complete as per the direction of Engineer in Charge with all necessary fitting.	BI01010001010000000000000515BI0100001196	6	Each
85	85	Providing and fixing C.P. jet of approved make for W.C. seat including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001197	2	Each
86	86	Proving and fixing P.V.C. connection pipe of approved make as per the direction of Engineer in Charge including carriage of material in all lead and lifts. 45 Cms long	BI01010001010000000000000515BI0100001198	14	Each
87	87	Proving and fixing P.V.C. connection pipe of approved make as per the direction of Engineer in Charge including carriage of material in all lead and lifts. 60 Cms long	BI01010001010000000000000515BI0100001199	10	Each
88	88	Providing and fixing toilet paper holder Jaquar make Cat No. AQN-CHR-7751 or equivalent series to Jal / Cera or as approved by Engineer in charge make including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001200	6	Each
89	89	Providing and fixing CP. Grating (Chilly ) 100 mm dia ISI make heavy duty including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001201	6	Each
90	90	Provding and fixing PVC water tank of D-plast/ Sintex make tripple layer including all necessary fittings including carriage of materails in all leads and lifts.	BI01010001010000000000000515BI0100001202	2	Each
91	91	Providing and fixing brass full way gate valve of Zolato / Leader make with wheels or equivalent series as approved by the Engineer in Charge including carriage of material in all lead and lifts. (ISI make) heavy duty.	BI01010001010000000000000515BI0100001203	2	Each
92	92	ELECTRICAL WORK Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.(Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts. Group A.	BI01010001010000000000000515BI0100001204	10	point
93	93	Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.(Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts. Group C	BI01010001010000000000000515BI0100001205	70	point
94	94	Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required..(Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts.Group C.	BI01010001010000000000000515BI0100001206	6	point
95	95	Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required. (Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001207	14	each
96	96	Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.(Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001208	34	each
97	97	Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.(Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001209	20	each
98	98	Supplying and fixing of following sizes of 25 mm dia PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-(DIPLAST,POLYFIT) including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001210	105	Meter
99	99	Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. (Havell,s/ KEI/ Finolex/ RR Cable) including carriage of material in all lead and lifts.2x1.5 Sq. mm.	BI01010001010000000000000515BI0100001211	265	Meter
100	100	Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. (Havell,s/ KEI/ Finolex/ RR Cable) including carriage of material in all lead and lifts 2x4.0 Sq. mm.	BI01010001010000000000000515BI0100001212	260	Meter
101	101	Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. (Havell,s/ KEI/ Finolex/ RR Cable) including carriage of material in all lead and lifts 2x 6 Sq. mm.	BI01010001010000000000000515BI0100001213	25	Meter
102	102	Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic (Usha/Baja/Havells/Khaitan make) including carriage of material in all lead and lifts. Ceiling Fan 1200 mm sweep, Category-A	BI01010001010000000000000515BI0100001214	5	each
103	103	Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic (Usha/Baja/Havells/Khaitan make) including carriage of material in all lead and lifts.Ceiling Fan 1400 mm sweep, Category-A	BI01010001010000000000000515BI0100001215	9	each
104	104	Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts.Single pole. Cat-A.	BI01010001010000000000000515BI0100001216	27	each
105	105	Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts.Double pole. Cat-A.	BI01010001010000000000000515BI0100001217	6	each
106	106	Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking p(Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts. Double door-6 way	BI01010001010000000000000515BI0100001218	5	each
107	107	Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking p(Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts. Double door-12way	BI01010001010000000000000515BI0100001219	1	each
108	108	Providing and installation of stationary storage type 25 Liter capacity water heater (Cat-A) Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- (Bajaj/Recold/Sparehot/Havell,s) including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001220	7	each
109	109	Providing and installation of Exhaust Fan, Light duty, (Domestic) 225 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- (Usha/Baja/Havells/Khaitan make) including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001221	5	each
110	110	Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. (PHILIPS, HAVELLS, DECON) including carriage of material in all lead and lifts.Fixed type wall bracket 150 dia, single lamp.(Category-A) or equivalent as approved by The Engineer in Charge.	BI01010001010000000000000515BI0100001222	8	each
111	111	Supplying and fixing of surface/recess mounting ceiling fitting of all sizes and shapes, containing one No. thread type CFL lamp holder (s), complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Ceiling fitting, recess type (Category-A) (PHILIPS, HAVELLS, DECON) including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001223	25	each
112	112	Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc. as required.(PHILIPS, HAVELLS, DECON) 1 x28 watt-FTL(T5) (Category-A) including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001224	16	each
113	113	Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. (PHILIPS, HAVELLS, DECON) Mirror light 610 mm, double lamp.(Category-A) or equivalent as approved by The Engineer in Charge including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001225	6	each
114	114	Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. (Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts. Telephone socket outlet, Modular.	BI01010001010000000000000515BI0100001226	5	each
115	115	Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. (Legrand/Havell,s/C&S make) including carriage of material in all lead and lifts.TV. Socket outlet, modular.	BI01010001010000000000000515BI0100001227	6	each
116	116	Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.(Havell,s/KEI/Finolex/RR Cable) including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001228	5	Meter
117	117	Supplying and fixing ding dong/ electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001229	5	each
118	118	Supply, installation, testing and commissioning of LG make 1.5 TR capacity dual inverter AC single phase 220 v Split type Air Condioner with ten meter copper pipe, angle iron stand complete in all respect including connection etc. as per direction of Engineer-in-charge. (LG, Voltas,Hitachi) including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001230	7	each
119	119	Supply Fabrication 100 Amp. Copper Bus Bar Chamber of cubical type,wall mounted, fixed type, single front, dust proof Panel made out of M.S. CRC sheet 16G base Frame duly painted with Siemens Grey Powder Coated Paint with 100A 4Strip copper Busbar copper shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars & Incoming/Outgoing Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded red,yellow,blue & black. Lifting Hooks, Danger plates Neoprene Rubber Gasket, Door Hinges and Panel Lock provided.. Incoming 100A 4P MCCB 25KA=1 no.,Outgoing 100 A copper Bus Bar including carriage of material in all lead and lifts.	BI01010001010000000000000515BI0100001231	1	each

Also Visit

Tenders

Himachal Pradesh Tenders

Services Tenders

Tour and Travel Services Tenders

Tour and Travel Agency Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Improvement Of Tourist Facility At Pong Dam Distt. Kangra (H.P.) Under Nai Rahen Nai Manzilen Conversion Of 5 Nos Existing Swiss Tents Accommodation Into Cottages Of Camping Site At Pong Dam Distt Kangra (H.P.) Sub Head : Improvement Of Camping Site By, Pong Dam Ditrict Kangra-Himachal Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Improvement Of Tourist Facility At Pong Dam Distt. Kangra (H.P.) Under Nai Rahen Nai Manzilen Conversion Of 5 Nos Existing Swiss Tents Accommodation Into Cottages Of Camping Site At Pong Dam Distt Kangra (H.P.) Sub Head : Improvement Of Camping Site By, Pong Dam Ditrict Kangra-Himachal Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us