Military Engineer Services-MES has published Repair/ Maintenance Of Dg Sets , Amf Panels , Servo Stabilizers And Apfc Panels In Technical And Residential Area Of Deal Under Ge ( I ) R N D Dehradun. Submission Date for this Tender is 15-08-2020. Servo Stabilizer Tenders in DEHRADUN Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Jul-2020 | Amdt in BOQ | Other | 08-08-2020 |
| 2 | 08-Aug-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-08-2020 |
| NAME OF WORK : REPAIR/ MAINTENANCE OF DG SETS , AMF PANELS, SERVO STABILIZERS AND APFC PANELS IN TECHNICAL AND RESIDENTIAL AREA OF DEAL UNDER GE(I) R&D DEHRADUN. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling and opening of parts for servicing of water cooled DG set of following capacity coupled with alternator, Maintenance and servicing mechanically and electrically, including cleaning, oiling /greasing, removing & replacement of defective / unserviceable parts with new parts,ie diesel filter /oil filter /Air filter /fan belt /fuel pipe/ engine oil pipe /Engine Oil etc as required at site and manufacturer's instructions and checking of valves & nozzles etc, reassembling the parts of DG set at position ensuring proper alignment connecting to existing system and making DG set perfectly operational and testing at site connected load to the entire satisfaction of the Engineer-in-Charge complete all as specified and directed. (including mentioned in Srl No. 1.01 here in below)\n | |||
| 2 | 1.01 | Notes:-(i) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, locking nuts, small springs, `O’ rings, screws/gaskets/ packing /studs etc. \n(ii) Engine oil shall be drained out carefully, collected by the contractor in his own suitable containers and stored properly for checking serviceability including cleaning of oil sump by pouring kerosene oil all as directed by the Engineer-in-Charge\n(iii) Fresh engine oil for DG sets shall be supplied by the contractor as “ Supply only” and shall be measured and paid separately under appropriate item of Sch ‘A’ . Its cost of filling is deemed to be included under the rates quoted by the contractor for above item.\n | |||
| 3 | 1.1 | 10 KVA to 20.0 KVA 3 phase 50 HZ Make:Kirloskar | 3 | Each Job | |
| 4 | 1.11 | 62.5 KVA 3 phase 50 HZ Make: CUMMINS/Kirloskar | 2 | Each Job | |
| 5 | 1.12 | 100 KVA to 140 KVA 3 phase 50 HZ Make: CUMMINS/Kirloskar | 3 | Each Job | |
| 6 | 1.13 | 160 KVA to 285 KVA 3 phase 50 HZ Make: CUMMINS/Kirloskar / Greaves /Caterpillar | 3 | Each Job | |
| 7 | 2 | Supply only element diesel filter with gasket suitable for following capacity of DG set dismantled / fixed under Sch `A` item No 1.00 here in above complete all as specified and directed. \n | |||
| 8 | 2.1 | 10 KVA to 20.0 KVA 3 phase 50 HZ Make:Kirloskar | 3 | Each Set | |
| 9 | 2.11 | 62.5 KVA 3 phase 50 HZ Make: CUMINS/Kirloskar/Greaves/Caterpillar | 2 | Each Set | |
| 10 | 2.12 | 100 KVA to 250 KVA 3 phase 50 HZ Make: CUMINS/Kirloskar/Greaves/Caterpillar | 3 | Each Set | |
| 11 | 3 | Supply only element Oil filter with gasket suitable for following capacity of DG set dismantled/fixed under Sch `A`item No 1.00 here in above complete all as specified and directed. \n | |||
| 12 | 3.1 | 10 KVA to 20.0 KVA, Make: Kirloskar | 3 | Each Set | |
| 13 | 3.11 | 62.5 KVA 3 phase 50 HZ Make: CUMINS/Kirloskar/Greaves/Caterpillar | 2 | Each Set | |
| 14 | 3.12 | 100 KVA to 250 KVA 3 phase 50 HZ Make: CUMINS/Kirloskar/Greaves/Caterpillar | 4 | Each Set | |
| 15 | 4 | Supply only Air cleaner element primary and safety for following capacity of DG set dismantled/fixed under Sch `A` item No 1.00 here in above complete all as specified and directed. \n | |||
| 16 | 4.1 | 10 KVA to 20.0 KVA, Make: Kirloskar | 2 | Each Set | |
| 17 | 4.11 | 62.5 KVA 3 phase 50 HZ Make: CUMINS/Kirloskar/Greaves/Caterpillar | 5 | Each Set | |
| 18 | 4.12 | 250 KVA to 285 KVA 3 phase 50 HZ Make: CUMINS/Kirloskar/Greaves/Caterpillar | 1 | Each Set | |
| 19 | 5 | Supply only corrosion resistor filter with gasket and CR plate for 62.5 KVA to 250 KVA 3 phase 50 HZ Make: CUMMINS/Kirloskar of DG set dismantled/fixed under Sch `A` item No 1.00 here in above complete all as specified and directed. \n | 6 | Each Set | |
| 20 | 6 | Supply only element bypass filter with gasket for 62.5 KVA to 250 KVA capacity DG Set dismantled/fixed under Sch `A` item No 1.00 here in above complete all as specified and directed. \n | 6 | Each Set | |
| 21 | 7 | Disconnecting, and taking out carefully old unserviceable AVR unit from DG set of various capacity complete and supply , fixing, connecting and testing AVR unit suitable for 3 phase 50 HZ alternator suitable for the following capacity of DG set complete all as specified and directed.\n | |||
| 22 | 7.1 | 10 KVA to 62.5 KVA | 2 | Each | |
| 23 | 7.11 | 100 KVA to 250 KVA | 4 | Each | |
| 24 | 8 | Dismantling and taking out the radiator fitted in following capacity of DG sets and strip opening complete radiator assembly,for servicing mechanically and proper cleaning of tubes with using de-scaling solution, including repair of water tubes and top/ bottom tanks by soldering / gas welding of leakage of tubes/tanks. including replacement of gasket, nut bolts,etc ensuring perfectly leak proof after servicing of radiator, re-assembling and fixing the same in position and testing the system complete all as specified and directed . \nNotes :- (i) Repairs/servicing/re-assembling and testing of radiator shall be carried out through a authorised representative of manufacturer.\n (ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, gaskets/ packing etc.\n(iii) The quoted rates of contractor are deemed to be included cost of transportation to and fro authorized service centre.\n \n | |||
| 25 | 8.1 | 10 KVA to 62.5 KVA 3 phase 50 HZ Make- CUMINS/Kirloskar | 1 | Each Job | |
| 26 | 8.11 | 100 KVA to 140 KVA 3 phase 50 HZ Make: CUMINS/Kirloskar/ Greaves/ Caterpiller | 2 | Each Job | |
| 27 | 8.12 | 160 KVA to 285 KVA 3 phase 50 HZ Make: CUMINS | 2 | Each Job | |
| 28 | 9 | Supply only the following items/spare parts suitable for raditor of DG set for following capacity dismantled/fixed under Sch `A` item No 8.00 here in above complete all as specified and directed.\nNote :- \n(i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 8.00 here in above.\n(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.\n | |||
| 29 | 9.1 | Radiator hose set with clamp complete for 10 KVA to 20.0 KVA 3 phase 50 Hz DG Set. | 2 | Each Set | |
| 30 | 9.11 | Radiator hose set with clamp complete for 62.5 KVA to 140 KVA 3 phase 50 Hz DG Set. | 3 | Each Set | |
| 31 | 9.12 | Radiator hose set with clamp complete for 160 KVA to 250 KVA 3 phase 50 Hz DG Set. | 2 | Each Set | |
| 32 | 9.13 | Water pump kit set complete consisting of impeller,shaft, seal, bearings,lock and gasket etc for 10 KVA to 20.0 KVA 3 phase 50 Hz DG set | 2 | Each Set | |
| 33 | 9.14 | Water pump kit set complete consisting of impeller,shaft, seal, bearings,lock and gasket etc for 62.5 KVA to 250 KVA 3 phase 50 Hz DG set | 5 | Each Set | |
| 34 | 10 | Supply only concentrated coolent suitable for radiator of DG set any capacity drained out / filling under Sch `A`item No 1.00 here in above complete all as specified and directed. | 150 | Per Litre | |
| 35 | 11 | Supply only lubrication oil SAE-40 ( 20 W- 40 grade) suitable for Engine of DG set any capacity drained out / filling under Sch `A` item No 1.00 here in above complete all as specified and directed. | 300 | Per Litre | |
| 36 | 12 | M & L for replacement of asbestos ropes with new asbestos rope of 12mm dia heat and fire resistance, lapping of exhaust pipe of any capacity of DG Set complete all as specified and directed. | 10 | Kg | |
| 37 | 13 | Dismantling and taking out the PT fuel system including injectors assembly fitted in following capacity of DG sets 3 phase 50 HZ of DG set and strip opening of PT fuel system including injectors assembly for carrying out repair/ servicing /overhauling mechanically ,cleaning, oiling/greasing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, complete and calibration of Fuel Injection after repair/ servicing /overhauling and re-assembling and fixing the same in position and testing complete all as specified and directed .\nNotes :- (i) Repairs/servicing / reassembling and testing of Fuel injector pump shall be carried out through a authorised service center on testing machine. (ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, shim, small springs, `O’ rings, screws/gaskets/ packing /studs etc. \n(iii) The quoted rates of contractor are deemed to be included cost of transportation to and fro authorized service centre.\n\n\n\n | |||
| 38 | 13.1 | 62.5 KVA to 140 KVA 3 phase 50 HZ Make: CUMMINS/Kirloskar | 2 | Each Job | |
| 39 | 13.11 | 160 KVA to 250 KVA 3 phase 50 HZ Make: CUMMINS/Kirloskar | 2 | Each Job | |
| 40 | 14 | Supply only the following items/spare parts suitable for PT fuel system including injectors assembly of DG set of 100 to 285 KVA capacity dismantled/fixed under Sch `A` item No 13.00 here in above complete all as specified and directed.\nNote :- \n(i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 13.00 here in above.\n(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.\n | |||
| 41 | 14.1 | Kit injector barrel plunger | 12 | Each | |
| 42 | 14.11 | Kit Gasket Governor set | 2 | Each | |
| 43 | 14.12 | Ball Bearing | 2 | Each | |
| 44 | 14.13 | Gasket fuel pump | 2 | Each | |
| 45 | 14.14 | Screen filter | 2 | Each | |
| 46 | 14.15 | Ball check | 2 | Each | |
| 47 | 14.16 | Gasket Injector | 12 | Each | |
| 48 | 14.17 | Seal ‘O’ ring | 24 | Each | |
| 49 | 14.18 | Pump gear fuel | 2 | Each | |
| 50 | 14.19 | Shaft fuel pump drive | 1 | Each | |
| 51 | 14.2 | Shaft tachometer drive | 1 | Each | |
| 52 | 14.21 | Bushing tachometer drive | 2 | Each | |
| 53 | 14.22 | Plunger governor | 1 | Each | |
| 54 | 14.23 | Plug injector orifice | 24 | Each | |
| 55 | 14.24 | Screen filter injector | 2 | Each | |
| 56 | 14.25 | Seal dust | 12 | Each | |
| 57 | 14.26 | O Ring injecter | 6 | Each | |
| 58 | 14.27 | Kit seal | 6 | Each | |
| 59 | 15 | Disconnecting, and taking out carefully old unserviceable parts of DG set of 10 to 500 KVA capacity complete and supply , fixing, connecting and testing following parts suitable for 3 phase 50 HZ DG set of 10 to 500 KVA capacity complete all as specified and directed. | |||
| 60 | 15.1 | Seal key way | 4 | Each | |
| 61 | 15.11 | Water separator | 2 | Each | |
| 62 | 15.12 | Oil temperature gauge | 2 | Each | |
| 63 | 15.13 | Water temperature gauge | 2 | Each | |
| 64 | 15.14 | Oil pressure gauge 0 to 7 kg/cm2 | 2 | Each | |
| 65 | 15.15 | Hours meter | 2 | Each | |
| 66 | 15.16 | Hump hose & bend | 1 | Each | |
| 67 | 15.17 | Toggle switch | 2 | Each | |
| 68 | 15.18 | Elbow male union | 2 | Each | |
| 69 | 15.19 | Dust cap | 6 | Each | |
| 70 | 15.2 | Ignition switch along with duplicate keys | 4 | Each | |
| 71 | 15.21 | Switch Temp | 2 | Each | |
| 72 | 15.22 | Switch pressure | 2 | Each | |
| 73 | 15.23 | Diaphram for 10 KVA DG set | 1 | Each | |
| 74 | 15.24 | Shut Down Valve | 4 | Each | |
| 75 | 15.25 | Hose fuel suction suitable for 10 KVA to 20 KVA DG set. | 2 | Each | |
| 76 | 15.26 | Hose fuel suction suitable for 62.5 KVA to 250 KVA DG set. | 3 | Each | |
| 77 | 15.27 | Hose fuel Return suitable for 10 KVA to 20 KVA DG set. | 2 | Each | |
| 78 | 15.28 | Hose fuel Return suitable for 62.5 KVA to 250 KVA DG set. | 3 | Each | |
| 79 | 15.29 | Hose Fuel, Water sperator to filter suitable for 62.5 KVA to 250 KVA DG set. | 2 | Each | |
| 80 | 15.3 | Hose Fuel, Filter to Fuel pump suitable for 62.5 KVA to 250 KVA DG set. | 2 | Each | |
| 81 | 16 | Dismantling and taking out the self starter,12 Volt DC fitted in 10 to 62.5 KVA 3 phase 50 HZ of DG sets and strip opening of Self starter 12 Volt DC for carrying out repair/ servicing /overhauling mechanically ,cleaning, oiling/greasing/varnishing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, complete and re-assembling of Self starter 12 Volt DC after repair/ servicing /overhauling and fixing the same in position and testing complete all as specified and directed .\nNotes :- (i) Repairs/servicing / reassembling and testing of Self starter 12 Volt DC shall be carried out through a authorised service center .(ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, shim, small springs, screws/gaskets/ packing /studs etc. \n(iii) The quoted rates of contractor are deemed to be included cost of transportation to and fro authorized service centre. | 1 | Each Job | |
| 82 | 17 | Supply only the following items/spare parts suitable for self starter, 12 Volt DC fitted in 10 KVA to 62.5 KVA 3 phase 50 HZ of DG set , dismantled/fixed under Sch `A` item No 16 here in above complete all as specified and directed.\nNote :- \n(i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 16 here in above.\n(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.\n | |||
| 83 | 17.1 | Solenoid switch suitable for self starter, 12 Volt DC | 1 | Each | |
| 84 | 17.11 | Commutator suitable for self starter, 12 Volt DC | 1 | Each | |
| 85 | 17.12 | Carbon brush suitable for self starter, 12 Volt DC | 1 | Each set | |
| 86 | 17.13 | Field coils suitable for self starter, 12 Volt DC | 1 | Each | |
| 87 | 17.14 | Bendix pinion assembly suitable for self starter, 12 Volt DC | 1 | Each | |
| 88 | 17.15 | Bush suitable for self starter, 12 Volt DC | 1 | Each | |
| 89 | 18 | Dismantling and taking out the self starter, 24 Volt DC fitted in 100 to 285 KVA 3 phase 50 HZ of DG sets and strip opening of Self starter 24 Volt DC for carrying out repair/ servicing /overhauling mechanically ,cleaning, oiling/greasing/varnishing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, complete and re-assembling of Self starter 24 Volt DC after repair/ servicing /overhauling and fixing the same in position and testing complete all as specified and directed .\nNotes :- (i) Repairs/servicing / reassembling and testing of Self starter 24 Volt DC shall be carried out through a authorised service center .(ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, shim, small springs, screws/gaskets/ packing /studs etc. \n(iii) The quoted rates of contractor are deemed to be included cost of transportation to and fro authorized service centre. | 1 | Each Job | |
| 90 | 19 | Supply only the following items/spare parts suitable for self starter, 24 Volt DC fitted in 100 KVA to 250 KVA 3 phase 50 HZ of DG set, dismantled/fixed under Sch `A` item No 18 here in above complete all as specified and directed.\nNote :- \n(i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 18 here in above.\n(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.\n | |||
| 91 | 19.1 | Solenoid switch suitable for self starter,24 Volt DC | 1 | Each | |
| 92 | 19.11 | Commutator suitable for self starter, 24 Volt DC | 1 | Each | |
| 93 | 19.12 | Carbon brush suitable for self starter, 24 Volt DC | 1 | Each set | |
| 94 | 19.13 | Field coils suitable for self starter, 24 Volt DC | 1 | Each | |
| 95 | 19.14 | Bendix pinion assembly suitable for self starter, 24 Volt DC | 1 | Each | |
| 96 | 19.15 | Bush suitable for self starter, 24 Volt DC | 2 | Each | |
| 97 | 20 | Disconnecting existing non functional armature of self starter, 24 Volt DC fitted in 100 to 285 KVA DG set , dismantling and strip opening of the armature of self starter, 24 Volt DC, removing the old existing burnt windings, cleaning the slots & rewinding of the armature of self starter, 24 Volt DC, including supply with existing gauge super enameled copper conductor , including insulating material such as illuminous paper, Letherized paper, cotton tape, glass sleeves insulating varnish etc as required at workshop and transportation to site & refixing on same position & testing complete all as specified and directed . | 1 | Each Job | |
| 98 | 21 | Dismantling of Old unserviceable batteries 12 Volt, 180 AH, from DG set and supply & fixing maintenance free batteries of 12 Volt, 180 AH capacity with electrolyte fully charged battery including interconnection, commissioning and testing complete all as specified & directed. | 2 | Each | |
| 99 | 22 | Disconnecting and taking out the exhaust system of DG set of any capacity between 62.5 KVA to 285 KVA and carrying out cleaning of choked, carbonized exhaust pipe including exhaust silencer , including soldering / welding of leakage of pipe.and assembling the complete exhaust assembly including replacement of exhaust manifold gasket side pieces, metallic flexible pipe, nut bolts, and testing for making it leak proof and fixing the same in position and testing the system complete all as specified and directed and supply , fixing, connecting of Ehaust Manifold side piece complete all as specified and directed. | 2 | Each\nJob \n | |
| 100 | 23 | M & L for Cleaning of MS fuel tank of DG sets of 100 to 300 ltr capacity by collecting the fuel in cleaned barrels and removing sludge deposited/accumulated inside the tank of and disposal of sludge at a distance not exceeding 100 metre and cleaning the tank with kerosene oil , replacement of fuel tank strainer and unserviceable fuel gauge with new PVC fuel level indicator fixed with clips to the tank and marking levels for every 10 litre by marking and numbering on the side of fuel tank with synthetic enameled paint and refilling the collected fuel after filtration complete all as specified and directed. | 2 | Each\nJob \n | |
| 101 | 24 | M & L for Cleaning of MS fuel tank of DG sets of 400 to 800 ltr capacity by collecting the fuel in cleaned barrels and removing sludge deposited/accumulated inside the tank of and disposal of sludge at a distance not exceeding 100 metre and cleaning the tank with kerosene oil , replacement of fuel tank strainer and unserviceable fuel gauge with new PVC fuel level indicator fixed with clips to the tank and marking levels for every 10 litre by marking and numbering on the side of fuel tank with synthetic enameled paint and refilling the collected fuel after filtration complete all as specified and directed. | 2 | Each\nJob \n | |
| 102 | 25 | Disconnecting and taking out old unserviceable belts of the DG set and supply and fixing new belt suitable for following capacity of DG set engine match the existing complete all as specified and directed. | |||
| 103 | 25.1 | Belt Fan suitable for DG Set 10 to 20 KVA | 2 | Each | |
| 104 | 25.11 | Belt for fan fuel pump,water pump and oil pump complete set suitable for DG Set 62.5 to 140 KVA | 2 | Each | |
| 105 | 25.12 | Belt for fan fuel pump,water pump and oil pump complete set suitable for DG Set 160 to 200 KVA | 2 | Each | |
| 106 | 25.13 | Belt for fan fuel pump,water pump and oil pump complete set suitable for DG Set250 to 500 KVA | 1 | Each | |
| 107 | 26 | Material & labour for replacement of unserveceable interconnection wiring and its interlocking system in AMF electric control panel for DG set with using and including PVC insulated and unsheathed stranded copper conductor cable, single core, minimum 1.5 Sqmm size or as required 1100 Volts grade cable for making functional controls of the DG set, auxiliary contactor, push buttons, indicator, amps meter, volt meter complete as required at site for functioning of DG set in auto and manual mode, checking AC/DC circuits and removing & replacement of defective / unserviceable parts with new parts, complete all as specified and directed .\nNotes : (i) The complete panel shall be checked and tested on full load after necessary repairs and replacement of unserviceable wiring. for its smooth functioning and proper interlocking including shutt down on high water tempreture and low Oil pressure.\n(ii) All control wires shall be properly bunched, tied, ferruled for proper identification and crimped with adequate size of copper lugs. the cost of same are deemed to include under these items. (iii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, shim, small springs, screws/gaskets/ packing /studs etc. \n | 2 | Each Job | |
| 108 | 27 | Supply only the following items/spare parts suitable for AMF pannel of DG set , dismantled/fixed under Sch `A` item No 26 here in above complete all as specified and directed.\nNote :- \n(i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 31 here in above.\n(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.\n | |||
| 109 | 27.1 | Electronic timer,on delay type, dual range, suitable of 220 Volts/ 24 Volts, 2NO+2NC, 50 Hz, AC supply/ DC supply , for 0-60 seconds . | 1 | Each | |
| 110 | 27.11 | Power contactor 3 pole with 2NO + 2NC auxiliary contacts, coil voltage 220 volts, AC3 rating 300/325/330 Amps. Complete all as specified and directed . | 1 | Each | |
| 111 | 27.12 | Power contactor 3 pole with 2NO + 2NC auxiliary contacts, coil voltage 220 volts, AC3 rating 400 Amps. Complete all as specified and directed . | 1 | Each | |
| 112 | 27.13 | Power contactor No volt coil suitable for 400 Ampscontactor Complete all as specified and directed . | 1 | Each | |
| 113 | 27.14 | Power contactor No volt coil suitable for 300/325/330 contactor Amps. Complete all as specified and directed . | 1 | Each | |
| 114 | 27.15 | Auxilliary relay 8 pin, 24 Volts ,DC , 2 change over. | 1 | Each | |
| 115 | 27.16 | Auxilliary relay 8 pin, 220 Volts , AC , 2 change over. | 1 | Each | |
| 116 | 27.17 | Bimetal under volt / over volt relay suitable for 3 phase, 3 wire with 2 NO+2NC auxiliary contacts | 1 | Each | |
| 117 | 27.18 | Engine starting relay with sequence timer & Master timer suitable for 12 / 24 Volts DC supply. | 1 | Each | |
| 118 | 27.19 | Selector switch 3 way for auto manual operation . | 1 | Each | |
| 119 | 27.2 | Selector switch 4 way for operation of volt meters & Ammeter. | 1 | Each | |
| 120 | 27.21 | Indicating lamps LED type with holder for 12 / 24 volts DC supply | 3 | Each | |
| 121 | 27.22 | Digital electronic ammeter double ratio with 5 Amps secondary current of any range, flush pattern sequence type size 96mmX96mm suitable for existing CT ratio for maintaining on 415 Volts built in selector switch | 1 | Each | |
| 122 | 27.23 | Digital electronic volt meter 0-50 V range suitable for 12 / 24 volt DC supply panel flush pattern square type size 96mmX96mm \n | 1 | Each | |
| 123 | 27.24 | Digital electronic volt meter 0-500 V range suitable for 415 Volts panel flush pattern square type size 96mmX96mm \n | 1 | Each | |
| 124 | 27.25 | Digital electronic Frequency meter 40-99.99 HZ buil in selector switch,suitable for 415 Volts panel flush pattern square type size 96mmX96mm | 1 | Each | |
| 125 | 27.26 | HRC fuse DIN type for AC circuit 415 volts having rating of 400 Amps . | 3 | Each | |
| 126 | 27.27 | Fuse base unit, suitable for cylindercal/DIN type HRC fuse links capacity up to 400 Amps . | 3 | Each | |
| 127 | 28 | Disconnecting and taking out engine fitted in 62.5 KVA to 285 KVA ,3 phase 50 Hz of DG set ( Make: Cummins/Catter Pillars/Kirloskar/Greaves) , dismantling and strip opening of complete engine of water cooled DG set of suitable capacity, 3 phase 50 Hz for carrying out repair and complete over hauling , mechanically and electrically, cleaning,oiling/greasing , and fixing of serviceable parts in position, and removing & replacement of unserviceable/defective parts /spares with new parts,as per manufacturer's instructions cleaning , oiling /greasing,descaling of water jackets,decarbonizing cylinder heads including refacing and lapping of valves, valve-seats, grinding of crank shaft or any other machining work required at site, allingment of connecting rods including matching with crank shaft. and reassembling the engine of DG set at position ensuring proper alignment and coupling the engine with alternator, complete all as specified and directed. (including mentioned in Srl No. 28.01 here in below) | 1 | Each Job | |
| 128 | 28.01 | Notes for Sch A item No. 28 here in above : (i) Repairs/Overhauling / reassembling and testing of engine of DG set shall be carried out through a authorised service center . (ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ here in after under item No.37.00 but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, locking nuts, small springs, `O’ rings, screws/gaskets/ packing /studs etc. \n(iii) The quoted rates of contractor are deemed to be included cost of transportation to and fro authorized service centre and machining job etc.as required (iv) The element for connecting to existing system and making DG set perfectly operational and testing at site connected load to the entire satisfaction of the Engineer-in-Charge shall be included/covered under the rates quoted in Sch A item No. 1 here in above consider for Maintenance and servicing. | |||
| 129 | 29 | Supply only the following items/spare parts suitable for DG set ( Make: Cummins) capacity 62.5 to 250 KVA 3 phase 50 Hz of dismantled/fixed under Sch `A` item No 28 here in above complete all as specified and directed.\nNote :- (i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 35 & 36 here in above.\n(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.\n | |||
| 130 | 29.1 | Liner cylinder | 6 | Each | |
| 131 | 29.11 | Piston | 6 | Each | |
| 132 | 29.12 | Pin Piston | 6 | Each | |
| 133 | 29.13 | Ring snap | 12 | Each | |
| 134 | 29.14 | Gasket cylinder head (Front) | 1 | Each | |
| 135 | 29.15 | Gasket cylinder head (Rear) | 1 | Each | |
| 136 | 29.16 | Gasket cylinder head cover | 2 | Each | |
| 137 | 29.17 | Valve intake (ALTV) | 2 | Each | |
| 138 | 29.18 | Valve exhaust (ALTV) | 2 | Each | |
| 139 | 29.19 | Guide valve | 12 | Each | |
| 140 | 29.2 | Seal valve steam | 12 | Each | |
| 141 | 29.21 | Cotter valve | 24 | Each | |
| 142 | 29.22 | Bearing connecting Rod, | 6 | Each | |
| 143 | 29.23 | Bearing main | 3 | Each | |
| 144 | 29.24 | Overhauling gasket packing kit full | 1 | Each | |
| 145 | 29.25 | Overhauling gasket packing kit half | 1 | Each | |
| 146 | 30 | Disconnecting and taking out of defective battery charger and supply and fixing new automatic battery charger 12/24 volts suitable for charging of two batteries, including power transformer, Amp meter, Voltmeter alongwith selector switch and connected accessories fixed with and including sheet metal enclosure powder coated complete all as specified and directed. | 2 | Each | |
| 147 | 31 | Disconnecting and taking out the voltage stabilizer of following capacity, any description and of any make, dismantling / opening of the voltage stabilizer of following capacity, three phase, AC 415 Volts, for Maintenance and servicing mechanically and electrically,including draining out existing transformer oil, and cleaning, oiling /greasing, removing & replacement of defective / unserviceable parts with new parts, as required at site and manufacturer's instructions and checking electronic circuits to make it functional , reassembling the parts of voltage stabilizer after overhauling / servicing at position ensuring proper out put connecting to existing system and applying one coat of synthetic enameled paint (heat resistant type) by spray machine after preparation including writing MES No/ SM No in capital letters of suitable size on body of stabilizer and making voltage stabilizer perfectly operational and testing at site on existing connected load to the entire satisfaction of the Engineer-in-Charge complete all as specified and directed. (including mentioned in Srl No.31.01 here in below)\n | |||
| 148 | 31.01 | Notes :- (i) Replacement of unserviceable parts shall be measured and paid for separately under appropriate item of Sch ‘A’ as supply only but fixing charges of the parts replaced/repaired is deemed to be included in these item (ii) Oil shall be drained out and collected in contractors own containers and reuse after heating and filtration through filtration plant to achieve the suitable dielectric strength/insulation value. Refilling, heating and filteration shall be included in the rate quoted by the contractor for above items. \n(iii) Fresh oil required for top up shall be measured as “supply only” but its heating and filling shall be included in the rate quoted by the contractor for above items. (iv) The quoted rate shall be deemed to include replacement of small/ minor parts i.e. washers,nut bolts, packing, screws,lamp etc. | |||
| 149 | 31.1 | 3 KVA capacity , | 3 | Each Job | |
| 150 | 31.11 | 15 KVA to 40 KVA capacity , | 3 | Each Job | |
| 151 | 31.12 | 75 KVA to 100 KVA capacity , | 3 | Each Job | |
| 152 | 31.13 | 150 KVA capacity , | 1 | Each Job | |
| 153 | 32 | Supply and replacement of Rotary pump with suction pipe not less than 1 Mtr complete all as specified and directed by Engineer-in-Charge | 1 | Each | |
| 154 | 33 | Supply only the following items/spare parts suitable for various capacity of Servo controlled Voltage Stabilizer dismantled/fixed under Sch `A` item No -31 here in above complete all as specified and directed.\nNote :- \n(i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 40 here in above.\n(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.\n | |||
| 155 | 33.1 | Servo motor 10 Kg-cm capacity. | 3 | Each | |
| 156 | 33.11 | Complete control wiring for each phase. | 3 | Each | |
| 157 | 33.12 | RC Net Work 10 Kg-cm (Resistor- Capacitor network) | 5 | Each | |
| 158 | 33.13 | Volt meter 0-300 volts, 72mm x 72 mm Square size, electromechanical type. | 3 | Each | |
| 159 | 33.14 | Electronic PCB Control Card (Sensing Card) | 3 | Each | |
| 160 | 33.15 | BTR- 36 | 5 | Each | |
| 161 | 33.16 | Indicator lamp pilot type (RYB) | 6 | Each | |
| 162 | 33.17 | Selector switches suitable for volt meter, 3 way ON/OFF type. | 6 | Each | |
| 163 | 33.18 | VARIAC Coil 40 KVA / 50 KVA capacity per Phase | 2 | Each | |
| 164 | 33.19 | Volt meter 0- 500 volts | 3 | Each | |
| 165 | 33.2 | Six Pin connector | 6 | Each | |
| 166 | 33.21 | Carbon brush suitable for 25KVA to 75 KVA stabilizer | 6 | Each | |
| 167 | 33.22 | Complete Armour | 3 | Each | |
| 168 | 33.23 | Terminal Stud | 2 | Each | |
| 169 | 33.24 | Micro Switch | 6 | Each | |
| 170 | 33.25 | Lever | 3 | Each | |
| 171 | 33.26 | VARIAC Coil 25 KVA/ 30 KVA capacity per phase | 2 | Each | |
| 172 | 33.27 | VARIAC Coil 75 KVA / 100 KVA capacity per phase | 2 | Each | |
| 173 | 33.28 | Motor for 3 KVA servo stablizer | 1 | Each | |
| 174 | 33.29 | Small Carbon bush for 3 KVA stablizer | 2 | Each | |
| 175 | 33.3 | RC Net work for 3 KVA Servo Stablizer | 2 | Each | |
| 176 | 33.31 | Transformer oil EHV confirming to IS-335 of 1983 of mineral oil grade 'B' having a high dielectric strength not less than 40 KV . | 120 | Ltr | |
| 177 | 33.32 | Push button switch for increase/decrease of voltage | 3 | Each | |
| 178 | 34 | Dismantling of Old unserviceable batteries 12 Volt, 90 AH, from DG set and supply & fixing maintenance free batteries of 12 Volt, 90 AH capacity with electrolyte fully charged battery including interconnection, commissioning and testing complete all as specified & directed. | 2 | Each | |
| 179 | 35 | Disconnecting , dismantling and taking out the non-functional turbo charger and Cleaning,Servicing, fixing, connecting and testing turbo charger including male-female fitting suitable for following capacity of DG sets as per existing shape and size complete all as specified and directed.Note: Transportation charges shall be paid by the contractor | |||
| 180 | 35.1 | 100 to 180 KVA 3 phase 50 HZ | 1 | Each Job | |
| 181 | 35.11 | 200 KVA to 285 KVA, 3 phase 50 HZ | 1 | Each Job | |
| 182 | 36 | Supply and replace of defective existing battery lead (Heavy duty) PVC insulated copper conductor single core multi stranded minimum 25 Sqmm one side fixed with clamp and other side fixed with brass battery terminal of heavy duty for 3 Mtr length (Set of two) | 6 | Each Set | |
| 183 | 37 | Surface dressing in soft/ loose soil, n. exe. 15 Cm deep including removal of material exe 50 Rm complete all as specified and directed. | 20 | Sqm | |
| 184 | 38 | Supply and fixing in repairs for unserviceable MS sheet of suitable thickness for DG sets/ panel boards and similar works, cut to size / shape, hole punched, including round headed screws, clout nails or rivets, bending and welding as necessary, etc.conforming to Fe.290.Gde-E-165, with and including applying two coats of synthetic enamel paint over a coat of red oxide primer with lap of 40 mm joints complete all as specified and directed. | 20 | Kgs | |
| 185 | 39 | Excavation in trenches in any type of soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. including removing cable protection covers/ bricks complete all as specified and directed. \nNotes : (i) Excavation shall be made carefully in order to avoid damage of existing cables and brick protection.\n(ii) The excavation work may be carried out in short lengths for locating fault in under ground cables at different locations | 35 | Cum | |
| 186 | 40 | M&L for Returning, filling in, including spreading leveling, watering and well ramming the excavated soil in layers not exceeding 25 cm thick complete all as specified and directed. | 18 | Cum | |
| 187 | 41 | M&L for Removal of surplus excavated soil to a distance not exceeding 50 Mtr distance and depositing as directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed. | 17 | Cum | |
| 188 | 42 | Material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed . | 14 | Cum | |
| 189 | 43 | M&L for old size sub class `B` bricks, kiln burnt, as in UG cable protection laid flat with axis of brick perpendicular to the axis of the cable complete all as specified and directed . | 1.5 | Per 1000Nos | |
| 190 | 44 | Supplying and fixing in replacement of MS pipe, 50 mm bore, medium grade as in sleeving etc laid in trenches or ducts etc complete all as specified and directed by Engineer-in-Charge. | 10 | Rm | |
| 191 | 45 | Disconnecting and taking out old existing unserviceable/ non- functional LT Cable and Supplying, laying, jointing and testing cable XLPE insulated IS 7098 (Part-I)-1988 marked, screened, PVC sheathed, armoured electric power cable (heavy duty) with aluminum conductor for working voltage upto and including 1100 Volts, cross sectional area of under mentioned size of cables laid in trenches/fixed on pole/wall / passed through pipe complete all as specified and directed by Engineer-in-Charge :- Make:Havells/CCI/ICL/GLOSTER/Incab/Nicco/Polycab/Plaza) (NOTE: Earth work, sand cushioning, pipe, clamps for holding cables and brick protection shall be measured and paid separately )\n | |||
| 192 | 45.1 | 150 Sqmm 3½ core | 230 | Rm | |
| 193 | 46 | Disconnecting, Dismantling of 100- 200 KVA indoor AMF panel and Supply, fix and commissioning of 1.6 mm sheet enclosure indoor type with powder coated, dust and vermin proof 100- 200 KVA AMF panel fitted with following acessories: INCOMER:-\n1 MCCB 200A, TP, 25 KA Thermal magnetic release with spreaders link & extended rotery handle, Make: Legrand or Sneider/Seimens-02 Nos\n2 Contactor 195A, TP Make: Legrand or Sneider/Seimens- 2 NO 3. METERING & AMF LOGIC:- Micro processor based AMF controllerDGC 6D- 01 No, Make- Procom\n4. VIF Meter, Make- Procom -1 NO 5. DC Ampere Meter 0-15A, Make- AE- 1 NO\n6. Indicating LED for load on mains, load on set, mains on, set on, Make- ESBEE- 4 Nos, 7. Auto/ manual selector switch, Make- SALZER- 1 No, 8. Start/Stop push button,Make-ESBEE/C&S/SURUTHI- 2 NO\n9. Automatic battery charger with auto trickile & auto boost facility features12 v/ 10 Max power- 1 No, 10. MCB 6A/16A, SP, 10 KA C Curve, Make: Legrand or Sneider/Seimens- 8 NO 11. RELAY CARD 24V PROCOM -1 No 12. CT 200/5A, CL 1, 15 VA For metering, Make-PROCOM- 3 NO. 13. Control & Power wiring-1 Job 14. Engine monitoring system with AMF panel incl. sfety water & oil, low lube oil sender unit etc. | 1 | Each Job | |
| 194 | 47 | Supply and fixing of defective existing DG set Anty vibration pad of size 6x6 inches (heavy duty) including serface leveling and masonory work etc. and nut, bolt,washer including T&P for fixing the antyvibration pad complete all as specied and directed. | 10 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
