Augmentation Of Dergaon Water Supply Scheme Execution , Testing And Commissioning Of 2 . 35 Mld Capacity Treatment Plant , Distribution , Raw Water Pumping Main , Submersible , Centrifugal Pumping Sets , Electrical Internal , External And Drawing, Dergaon Water Supply Scheme-Assam

TDR : 24986475

Tender Notice
BOQ

Expired

Dergaon Water Supply Scheme , Assam

Tender Brief : Augmentation Of Dergaon Water Supply Scheme Execution , Testing And Commissioning Of 2 . 35 Mld Capacity Treatment Plant , Distribution , Raw Water Pumping Main , Submersible , Centrifugal Pumping Sets , Electrical Internal , External And Drawing

Document Fees
₹ 6000 /-

EMD
₹ 724360.0 /-

Tender Value
₹ 3.62 Crore /-

Submission Date
03-08-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work :Augmentation of Dergoan Water Supply Scheme
1	1	A) Construction of Aerator , Raw water channel, Filter house and Mechanical piping works
2	2	Earth work in excavation fin foundation trenches including refilling the quantity as necessary after completion of works of pipe line dressing , ramming , watering etc. and removal of surplus earth with 50 mtr lead and lift upto 1.5 mtr all complete as directed-(a) Ordinary soil	250.99	Cum
3	3	(B) Extra over item no 1.00 above for each 1.00 mtr depth or pert thereof beyomd the initial depth of 2.00 mtr	8	Cum
4	4	Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) -A) Up to a depth of 1.5 meter.	354.25	Sqm
5	5	B) From depth of 1.5 meter to 3.00 meter.	96.45	Sqm
6	6	Supplying and filling sand gravel in foundation, trenches of column footings over slushy soil including local carriage of materials within 8.00 Km pumping out water, ramming etc complete for strengthening the bearing capacity of the soil as directed and specified including payment of land compensation, forest loyalty, sale tax and other duties and taxes as may be necessary.	12	Cum
7	7	(B)Extra lead per Km truck carriage for sand gravel beyond the initial lead of 8 km.( Quarry distance from site is 45 Km; So additional lead is 45-8= 37.00 Km	444.15	Cum/km
8	8	Sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering, ramming etc complete as directed and specified including payment of land compensation, forest loyalty, sale tax and other duties and taxes as may be necessary.--(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.	68.13	Cum
9	9	Providing Brick soling in foundation and floor with stone / best quality picked jhama brick, sand packed and laid to level and in panel after preparing the sub grade etc, if necessary dewatering complete- Brick on flat soling.	222.4	Sqm
10	10	Providing & laying 25 mm thick Damp Proof Coarse with cement concrete in prop.1:1.5:3 with graded stone aggregate of 10 mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.	2.42	Sqm
11	11	Plain Cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footing,steps,walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separately -In proportion 1:3:6	20.27	Cum
12	12	Providing and laying controlled cement concrete of grade M 30 with 20 mm down graded stone aggregate including dewatering if necessary and curing complete but excluding cost form work and reinforcement for R.C.C. work as directed in sub structures up to plinth level -for foundation, footing ,column with base, tie and plinth beams....etc
13	13	a)In sub-structure- Foundation, footing, tie beam and the like upto plinth level.	45.56	Cum
14	14	b)In super structure-Lintel, chajja,column, beams, slab , staire case etc upto first floor level.	103.55	Cum
15	15	Providing and laying controlled cement concrete of grade-M25 with 20 mm down graded stone aggregate including dewatering if necessary and curing complete but excluding cost form work and reinforcement for R.C.C. work a) In sub-structure- Foundation, footing, tie beam and the like upto plinth level.	10.42	Cum
16	16	Extra for providing and mixing normal Plastisizer Plastiment BV 40 of Sika India Ltd. /Dr. Sealkit Superplast WR 40 (Asian Chemicals)/Rheobuild 1100i of BASF@ 0.5%-0.8% by weight of cement in concrete for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. as specified and directed by the Department complete at all levels.(iii) In 1 : 1 : 2 (1cement : 1coarse sand : 2aggregate) or M-25 grade.	101.35	Cum
17	17	Extra for RCC works in each subsequent floor or part thereof above 1st floorlevel.	48.29	Cum
18	18	Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S code for RCC work/ RB walling including straightening , cleaning , cutting and bending to proper shapes and lengths per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, support, chairs, spacers complete ( up to 1st floor level- a) From Primary Producer: TATA/ SAIL/ Esser Steel/ Jindal steel/ Shyam steel /RINL- (ii)Super Ductile (SD) TMT reinforcement bars	20952.8	Kg
19	19	B) Extra for reinforcement work above first floor level	6259.3	Kg
20	20	Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for insitu reinforced concrete and plain concrete works in : (a) In foundation etc	57.05	Sqm
21	21	b) C/S of tie beam, etc	139.17	Sqm
22	22	c) C/S of square column	312.29	Sqm
23	23	d) Sides and soffits of beam	161.07	Sqm
24	24	e) Flat surface-suspended floors, roofs, landings	216.91	Sqm
25	25	f) Stair case with sloping soffits	50.92	Sqm
26	26	g) In super structure- In vertical wall	421.08	Sqm
27	27	d) In suspended floor, slab, landing,etc	30.34	Sqm
28	28	Extra for centering and shuttering for each subsequent floor or part thereof above first floor level.	158.35	Sqm
29	29	Extra for centering and shuttering for each subsequent floor or part thereof above first floor level mentioned in item no21	375.14	Sqm
30	30	Brick work in cement mortar with first class bricks including racking out joints and dewatering if necessary and curing complete as directed in sub structures up to plinth level with 1:3 mix mortar.	26.59	Cum
31	31	112 mm thick reinforced brick wall in proportion 1:5, reinforced with two lines of M.S. rod/ tor steel as specified embedded in 38mm thick concrete course in proportion 1:2:4 with coarse aggregate 12 mm down at every fourth courses embedded with protruding rod as directed (M.S.rod/Tor steel shall be measured and paidseperately) in super structures above plinth up to 1st floor level.	235.93	Sqm
32	32	Extra for brick walling for each subsequent floor or part thereof above first floor level as mentioned in item nos.32	209.07	Sqm
33	33	Providing wood work in frames (chowkhat) of doors, windows, clearstory windows and other similar works in fixed in position in contact with C.C.or brick masonry wall including supplying , fitting and fixing with and M.S. hold fast (40mm X 3mm X 250) as per design embedded in cement concrete block in proportion 1:2:4 and with 2 coats of kiricide oiling to the timber faces in contact with CC and masonry as directed and specified.(a) With 1st class timber (Sundi /Bonsum)	0.131	Cum
34	34	Providing, fitting and fixing steel window (openable ) of standard rolled steel sections as per relevant IS code -1038 joints mitred and welded with 15 mm X 3 mm X 100 mm lug embedded in cement concrete block of M-10 ( 1:3:6) grade including providing and fixing of projecting hinges( not more than 65mm and not less than 15 mm wide) bolting device and steel handles, peg stays of 300 mm long each complete including providing 12 mm X 12mm square bar duly welded to steel frame at not more 120 mm centre to center, applying a priming coat of red lead paint etc. complete as per drawing Openable shutter	18.56	Sqm
35	35	Providing and fixing clear sheet glass bedded in putty and fixed with / without wooden beadings including necessary cuttings of glass to required sizes (payment for wooden beads shall be made seperately). -5 mm thick.	17.29	Sqm
36	36	Providing, fitting and fixing 35mm thick full paneled doors/windows including oxidized M.S. butt hinges(100 mmX 75 mmX 3.55 mm) 6 nos. with necessary screws.- 35 mm thick shutter with 1st class Bola/ Gamari wood.	3.59	Sqm
37	37	Supplying , fitting and fixing anodized aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete (anodized to bright natural matt & satin finished.
38	38	a) Sliding door bolts of size-250 mmX 16 mm	2	Each
39	39	b)Tower bolt-250mm X 12 mm	4	Each
40	40	c) Door/ handle-150 mm size	4	Each
41	41	25 mm thick cement concrete topping 1:2:4 (1 cement: 2 coarse sand :4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish ( base concrete to be measured and paid separately) to be laid in panels including curing complete as directed.	346.34	Sqm
42	42	Cement plaster skirting with cement mortar in proportion 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement including rounding of junction with floor- 20 mm thick	431.61	Sqm
43	43	15 mm plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed-In cement mortar 1:6.	766.85	Sqm
44	44	10mm thick cement plaster in single coat on fair side of brick/concrete wall for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80 mm girth and finished even and smooth including curing complete as directed.- In cement mortar 1:3	310.05	Sqm
45	45	Extra for plastering on ceiling and soffits of stairs up to first floor level ( instead of plastering on walls) including curing complete as directed. - In single coat plaster	310.05	Sqm
46	46	Extra for interior plastering above first floor level for every additional floor or part thereof including curing complete as directed. - In single coat plaster	377.32	Sqm
47	47	Extra for exterior plastering over wall up to a height of first floor level above G.L. including curing complete as directed. - In single coat plaster	310.05	Sqm
48	48	Extra for exterior plastering for wall for every additional floor or part thereof beyond first floor level including curing complete as directed. - In single coat plaster	275.19	Sqm
49	49	White washing with lime on wall surfaces (two coats) to give an even shade including thoroughly brooming the surfaces to remove all dirt, dust, mortar drops and other foreign matter and including preparing the surface even and sand papered smooth.	292.47	Sqm
50	50	Supplying, fitting,and fixing M.S. angles, M.S. flats, bolts and nuts including painting with red lead paint one coat complete as directed- M.S. angles, pipes etc	190.8	Kg
51	51	Applying one coat cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.	831.04	Sqm
52	52	Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface( two coats) to give an even shade after thoroughly brooming the surfaces to remove all dirt and remains of all loose powdered materials.	831.04	Sqm
53	53	Finishing old / new with waterproffing weather coat smooth antifungal exterior painting of approved make of Berger paint of required shade after cleaning the surface etc.including scaffolding complete as directed at all levels ( two coats)	5.19	Sqm
54	54	Painting two coats (excluding priming coat) over new wood and wood based surfaces over 100 mm in girth/ width with enamal paint of approved brand and manufacture ( Asian paint/ Berger Paint / ICI paint / J&N paint / Nerolac ) to give an even shade including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting .	5.19	Sqm
55	55	Applying prime coat over new steel and other metal surfaces over 100 mm in girth/ width after preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matterand scoured with wire brushes, fine steels, wood scrapers and sand papering- with ready mixed \" Red lead / Red oxide primer.	43.4	Sqm
56	56	Painting two coats ( excluding priming coat) over new steel and other metal surfaces over 100 mm in girth/ width with enamel paint of approved brand and manufacture (Asian paint / Berger paint / ICI paint / J&N paint / Nerolac ) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter.	43.4	Sqm
57	57	Applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals /Dr. Sealkit Flexbond AP 122 C (Asian Chemicals) / MASTERSEAL 550EL of BASF for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels.	209.82	Sqm
58	58	B)MACHNICAL ARRANGEMENT FOR TREATEMENT PLANT
59	59	Labour charge for carrying laying in position cast iron double flanged pipe in line level all complete as directed
60	60	80mm dia pipe	78	Rm
61	61	250mm dia pipe	79.2	Rm
62	62	Providing flanged foints to double flanged CI pipes and specials with testing of joints and including supplying bolts, nuts and 3mm thick rubber insertion sheet all complete as directed
63	63	80mm dia.	20	Each
64	64	250mm dia.	75	Each
65	65	Labour charge for carrying, placing in position, fitting and fixing CI sluice valve ( with wheel and cap) CI reflex valve complete with supplying bolts and nuts, 3 mm thick rubber insertion sheet etc. ( the tail pieces if required will be paid seperately) all complete as directed ( one valve and two flanged joints).
66	66	80mm dia.	2	Each
67	67	150mm dia	4	Each
68	68	200mm dia.	2	Each
69	69	250mm dia.	8	Each
70	70	300mm dia.	2	Each
71	71	Labour charge for carrying and laying in position D.I. / C.I.S.& S S&S , flange , Plain ended C.I. specials such as Tee , Bends , Collars , Tappers and Caps etc complete as directed .	15	Qntl.
72	72	Providing 12mm dia.hole for lateral @ 215mm center to center spacing	700	Each
73	73	Providing Pipe for areator arrangment 65mm dia.GI medium pipe including making of Round shape suitable for the existing size and making hole for areation all complete including tee, bend etc	1	Job
74	74	Supplying of centrifugally cast(spun) iron double flange pressure pipes conforming to ISI specification in standard working length .
75	75	80mm dia.	390	Kg
76	76	250mm dia.	6541.92	Kg
77	77	Supplying and devilary of cast iron double flanged (CI/DF) sluice valve with hand wheel (Class PN-1.6) conforming to relevant BIS Specifications (with latest ammendment, current at the time of execution), of any reputed make to the distribution pipe lines including supply, fitting, fixing of insertion sheets (gaskets), nuts and bolts with washers, etc. and including all taxes and duties, all complete as directed and specified.
78	78	80mm dia	2	Each
79	79	150mm dia.	4	Each
80	80	200mm dia.	8	Each
81	81	250mm dia.	2	Each
82	82	300mm dia.	2	Each
83	83	Supplying and devilary of ISI marked DI double socketed fittings such as Tee , Bends , Reducer , Tappers and Caps etc class k-12 conforming to IS 9523-2000 of PN 1.6 with up to date amendment of required diameter suitable for used with DI spun pipe conforming to IS 8329-2000 of class k-7 DI pipe along with necessary rubber ring of EPDM quality conforming to IS : 5382-1985	1500	Kg
84	84	Supply of Galvanized Iron(GI) Pipe as per the IS specification conforming to IS-1239(pt-I), 1990 medium pipe of 100 mm dia for Air Blower line	22	Rm
85	85	Supply of Galvanized Iron(GI) for Air blower line ( heavy duty) as per the IS specification conforming to IS-1239(pt-I), 1990
86	86	100mm dia. Tee	2	Each
87	87	100mm dia. Union socket	2	Each
88	88	100mm dia. Elbow	8	Each
89	89	100mm dia.900 bend	4	Each
90	90	100 mm dia. Socket	8	Each
91	91	100mm dia. 6'' nipple	6	Each
92	92	100mm dia full way valve.	2	Each
93	93	Supply of full Thread Nuts & Bolt suitable for DI pipe fitting and specials	170	Kg
94	94	Supply of rubber gasket 4.00 mm thick in quality and in conform to IS: 5382/1985. The PCD and flange hole dimension should conform to IS 1538/1993 and gasket should be suitable for making flanged joint.	100	Kg
95	95	Supply of Galvanized Iron(GI) Pipe as per the IS specification conforming to IS-1239(pt-I), 1990 medium pipe of 15mm dia for Alum & Bleaching dozer	80	Rm
96	96	Supply, installation, testing and commissioning of 20 HP capacity of electrical driven Air blower suitable for operation with 415 (+10 %) V, 3-phase, 50 Hz + 3% power supply with panel board including Star Delta starter (AC incorporating incomer MCCB, three air break contactors for main/delta/star complete set as required) etc. with suitable size/capacity & following specification of pump/ motor along with all accessories such as base frame, coupling, guard foundation, bends, non return valves, sluice valve, clamps with nuts & bolts, clips etc. in all respect including construction of foundation all complete including connection with Air Blower line in all respect.	20	Each
97	97	C) Providing Filter Media (Filter bed size- 2x3.00 m x 3.95 m)
98	98	Supplying and placing of River gravel for Rapid Gravity filter effective size following sixe and free from dust, clay, fine particles and dirt of every description.\n40 to 50 mm size : 200mm \n32 to 40 mm size : 100mm\n12 to 20 mm size : 100mm\n6 to 12 mm size: 100mm\n	11.85	Cum
99	99	Supplying and placing of coarse sand filter for Rapid Gravity filter effective size 0.06mm to 0.50 mm and uniformity coefficient between 1.7 to 1.3 all complete as directed sand shall be hard and quartz and quartzite and free from dust, clay, fine particles and dirt of every description.	21.33	Cum
100	100	D) Distribution pipe net work
101	101	Earth work in excavation in black toping road surface (average thickness of black toping 35mm) including the removal of road metal, boulders and refilling the same properly and restore the road surface to its original condition (except black toping as the black toping to be done by the PWD on necessary payment all complete as directed.For 100mm dia to 300 mm dia DI pipe	2532	M2
102	102	Earth work in excavation for metallic road surface (average thickness of 40 cm) including the removal of road metal, boulders and including restoration of road surface original condition all complete as directed.For 100mm dia to 300 mm dia DI pipe	3376	M2
103	103	Earth in excavation in foundation trenches including refilling the quantity as necessary after completion of works of pipe line dressing, ramming, watering etc. and removal of surplus earth with 50 M lead and lift up to 1.5 M all complete as directed including boiling out water where necessary.b) Bastic land, tillah soil, hard soil, mixed with moram gravel and boulder up to one man size.For 100mm dia to 300 mm dia DI pipe.	48.5	M3
104	104	Labour charge for carrying and laying DI pipes and specials (Class-7) in position, in line and level complete as directed.
105	105	100 mm dia. pipe	4100	RM
106	106	150 mm dia. pipe	1800	RM
107	107	200 mm dia. pipe	362	RM
108	108	250 mm dia. pipe	1025	RM
109	109	300mm dia. pipe	1261	RM
110	110	Providing rubber gasket joints to C.I. pipes and specials with testing of joints including carriage of the materials but excluding the cost of rubber gasket all complete as directed.
111	111	100 mm dia. pipe	820	Each
112	112	150 mm dia. pipe	360	Each
113	113	200 mm dia. pipe	73	Each
114	114	250 mm dia. pipe	205	Each
115	115	300mm dia. pipe	252	Each
116	116	Labour charge for carrying, placing in position S & S flanged, plain ended C.I Specials such as tees, bends, collars, tappers and caps etc all complete as directed.A) Al Socketed Tee, Tee, all type of Bend, Reducer, Flange adoptor etc	83.25	Qntl.
117	117	Labour charge for carrying, placing in position, fitting and fixing C.I. sluice valve (with wheel & cap) C.I. refluxe valve complete with supplying bolts and nuts, 3 mm thick rubber insertion sheet etc (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints
118	118	100 mm dia. pipe	6	Each
119	119	150 mm dia. pipe	3	Each
120	120	200 mm dia. pipe	2	Each
121	121	250 mm dia. pipe	2	Each
122	122	300mm dia. pipe	1	Each
123	123	Labour Charge carrying, fitting and fixing CI Double Air valve complete with supplying bolts, Nuts, 3mm thick rubber incertation etc. All complete as directed
124	124	80 mm dia.	5	Each
125	125	65 mm dia.	3	Each
126	126	Labour charge for cutting DI pipe of different dia for required length as directed.	100	Each
127	127	Construction of brick masonry valve Chamber in cement mortar 1:5 ( 1 cement: 5 coarse sand ), 100 mm thick RCC top slab with 1:2:4 mix (1 cement :2 coarse sand: 4 grade stone aggregate20 mm nominal size) with 10 mm dia tor steel @ 130c/c both ways (double jali), 100 mm thick foundation concrete 1:3:6 mix (1 cement :3 coarse sand: 4 grade stone aggregate40 mm nominal size) concrete, inside plastering 12mm thick with cement mortar 1:4 (1 cement: 4 course sand) finished with floating coat neat cement complete as per standard design and drawing as directed by the Engineers-In-Charge .
128	128	a) Size -1000x1000x1200	14	Each
129	129	b) Size -1200x1200x1201	4	Each
130	130	Supply, delivery and stacking of centrifugally cast (spun) Ductile Iron Presser Pipes ISI Marked, Class K-7 with socket and spigot ends conforming to IS:8329/2000 of standard working lengths 5.50 meter and 6.00 meter with inside inside cement mortar lining of 3 mm nominal thickness and outside Blue Epoxy coating suitable against longitudinal bending and differential settlement, relatively smooth walls, chemically inert with respect to soil and water.
131	131	100 mm dia.	4100	Rm
132	132	150 mm dia.	1800	Rm
133	133	200 mm dia	362	Rm
134	134	250 mm dia	1025	Rm
135	135	300 mm dia	1261	Rm
136	136	Supplying and devilary of ISI marked DI double socketed fittings such as Tee , Bends , Reducer , Tappers and Caps etc class k-12 conforming to IS 9523-2000 of PN 1.6 with up to date amendment of required diameter suitable for used with DI spun pipe conforming to IS 8329-2000 of class k-7 DI pipe along with necessary rubber ring of EPDM quality conforming to IS : 5382-1985	8325	kg
137	137	Supplying and devilary of ISI Marked CI Jeffy Joints Collar (Flanged Adopter) with full threaded Nuts & Bolts for use with DI pipes Conforming to IS:14846/2000 with up to date amendments of following sizes. (PN-1.6)
138	138	i) 100 mm dia.	10	Each
139	139	ii) 150 mm dia.	4	Each
140	140	ii) 200 mm dia.	6	Each
141	141	ii250 mm dia.	4	Each
142	142	ii) 300mm dia.	4	Each
143	143	Supplying and devilary of ISI Marked CI Jeffy Joints (Mechanical Collar Coupling) with full threaded Nuts & Bolts for use with DI pipes Conforming to IS:14846/2000 with up to date amendments of following sizes. (PN-1.6)
144	144	i) 100 mm dia.	10	Each
145	145	ii) 150 mm dia.	4	Each
146	146	ii) 200 mm dia.	6	Each
147	147	ii250 mm dia.	4	Each
148	148	ii) 300mm dia.	4	Each
149	149	Supplying and devilary of cast iron double flanged (CI/DF) sluice valve with hand wheel (Class PN-1.6) conforming to relevant BIS Specifications (with latest ammendment, current at the time of execution), of any reputed make to the distribution pipe lines including supply, fitting, fixing of insertion sheets (gaskets), nuts and bolts with washers, etc. and including all taxes and duties, all complete as directed and specified.
150	150	100 mm dia. pipe	8	Each
151	151	150 mm dia. pipe	2	Each
152	152	200 mm dia. pipe	4	Each
153	153	250 mm dia. pipe	3	Each
154	154	300mm dia. pipe	1	Each
155	155	Supplying ,devilary, fitting and fixing of 98.5 mm dia resilient seated Cast Iron Air Relief Valves conforming to IS:14845-2000 to DI water distribution pipe line including supply, fitting fixing of insertion sheets (gaskets), nuts and bolts with washers, etc. all complete as directed and specified.
156	156	76.63 mm dia.	5	Each
157	157	65 mm dia.	3	Each
158	158	Supply of full Thread Nuts & Bolt suitable for DI pipe fitting and specials	200	Kg
159	159	Supply of rubber gasket 4.00 mm thick in quality and in conform to IS: 5382/1985. The PCD and flange hole dimension should conform to IS 1538/1993 and gasket should be suitable for making flanged joint.	100	Kg
160	160	Supplying of additional quantity of rubber ring of EPDM quality (Tyton Joint) as per IS:5382-1985 and its upto date amendment as applicable suitable for DI pipes
161	161	100 mm dia	30	Each
162	162	150 mm dia	10	Each
163	163	200 mm dia	20	Each
164	164	250 mm dia	15	Each
165	165	300 mm dia	20	Each
166	166	E) Raw Water Pumping main for 200 mm dia
167	167	Earth work in excavation in black toping road surface (average thickness of black toping 35mm) including the removal of road metal, boulders and refilling the same properly and restore the road surface to its original condition (except black toping as the black toping to be done by the PWD on necessary payment all complete as directed.	160	M2
168	168	Earth work in excavation for metallic road surface (average thickness of 40 cm) including the removal of road metal, boulders and including restoration of road surface original condition all complete as directed.	160	M2
169	169	Earth in excavation in foundation trenches including refilling the quantity as necessary after completion of works of pipe line dressing, ramming, watering etc. and removal of surplus earth with 50 M lead and lift up to 1.5 M all complete as directed including boiling out water where necessary.b) Bastic land, tillah soil, hard soil, mixed with moram gravel and boulder up to one man size.	160	M3
170	170	Labour charge for carrying and laying DI pipes and specials (Class-k-9) in position, in line and level complete as directed.	1500	RM
171	171	Providing rubber gasket joints to C.I. pipes and specials with testing of joints including carriage of the materials but excluding the cost of rubber gasket all complete as directed.	290	Each
172	172	Labour charge for carrying, placing in position S & S flanged, plain ended C.I Specials such as tees, bends, collars, tappers and caps etc all complete as directed.	9.16	Qntl.
173	173	Labour charge for carrying, providing and fixing non return valve of approved quality including supplying jointing materials all complete as directed.	1	Each
174	174	Labour charge for carrying, placing in position, fitting and fixing C.I. sluice valve (with wheel & cap) C.I. refluxe valve complete with supplying bolts and nuts, 3 mm thick rubber insertion sheet etc (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints	1	Each
175	175	Labour Charge carrying, fitting and fixing CI Double Air valve complete with supplying bolts, Nuts, 3mm thick rubber incertation etc. All complete as directed	3	Each
176	176	Labour charge for cutting DI pipe of different dia for required length as directed.	25	Each
177	177	Construction of RCC thrust block as per standard design and drawing as directed by the Engineers-In-Charge . Size 1.20 m X 1.20 M x !.20 M	8	Each
178	178	Construction of RCC pillar as per standard design and drawing as directed by the Engineers-In-Charge .Size-0.30 m x 0.30 m x 2.50 m	6	Each
179	179	Construction of brick masonry valve Chamber in cement mortar 1:5 ( 1 cement: 5 coarse sand ), 100 mm thick RCC top slab with 1:2:4 mix (1 cement :2 coarse sand: 4 grade stone aggregate20 mm nominal size) with 10 mm dia tor steel @ 130c/c both ways (double jali), 100 mm thick foundation concrete 1:3:6 mix (1 cement :3 coarse sand: 4 grade stone aggregate40 mm nominal size) concrete, inside plastering 12mm thick with cement mortar 1:4 (1 cement: 4 course sand) finished with floating coat neat cement complete as per standard design and drawing as directed by the Engineers-In-Charge . Size- 1.20 m x 1.20 m x1.20 m	1	Each
180	180	Supply, Delivery , laying , testing and commissiong Stacking of Centrifugally Cast (Spun) Ductile Iron of 200 mm dia. (Class, K-9) Pressure Pipes ISI Marked with Socket & Spigot ends conforming to IS 8329: 2000 of standard working lengths 5.50 meter or 6.00 meter with inside cement mortar lining of 3 mm nominal thickness and outside Blue Epoxy coating suitable against longitudinal bending and differential settlement, relatively smooth walls, chemically inert with respect to soil and water including DI specials like bend ,tee etc as required for laying of said pipe lines and hydraulic testing of the same, .	1500	RM
181	181	Supplying and devilary of ISI marked DI double socketed fittings such as Tee , Bends , Reducer , Tappers and Caps etc class k-12 conforming to IS 9523-2000 of PN 1.6 with up to date amendment of required diameter suitable for used with DI spun pipe conforming to IS 8329-2000 of class k-7 DI pipe along with necessary rubber ring of EPDM quality conforming to IS : 5382-1985	472	Kg
182	182	Supplying and devilary of ISI Marked CI Jeffy Joints Collar (Flanged Adopter) with full threaded Nuts & Bolts for use with DI pipes Conforming to IS:14846/2000 with up to date amendments of following sizes. (PN-1.6) 200 mm dia	6	Each
183	183	Supplying and devilary of resilient seated Ductile Iron Horizontal Non -Return Valves conforming to IS:5312/2004 and PN 1.6 with up to date amendments to DI water distribution pipe line including supply, fitting fixing of insertion sheets (gaskets), nuts and bolts with washers, etc. all complete as directed and specified of 200 mm dia	1	Each
184	184	Supplying and devilary of cast iron double flanged (CI/DF) sluice valve 200 mm dia with hand wheel (Class PN-1.6) conforming to relevant BIS Specifications (with latest ammendment, current at the time of execution), of any reputed make to the distribution pipe lines including supply, fitting, fixing of insertion sheets (gaskets), nuts and bolts with washers, etc. and including all taxes and duties, all complete as directed and specified.	1	Each
185	185	Supplying ,devilary, fitting and fixing of 98.5 mm dia resilient seated Cast Iron Air Relief Valves conforming to IS:14845-2000 to DI water distribution pipe line including supply, fitting fixing of insertion sheets (gaskets), nuts and bolts with washers, etc. all complete as directed and specified.	1	Each
186	186	Supply of full Thread Nuts & Bolt suitable for DI pipe fitting and specials	100	Kg
187	187	Supply of rubber gasket 4.00 mm thick in quality and in conform to IS: 5382/1985. The PCD and flange hole dimension should conform to IS 1538/1993 and gasket should be suitable for making flanged joint.	70	Kg
188	188	F) Construction of Pump houses
189	189	Earth work in excavation in slushy/ marshy soil, decomposed organic matter mixed with brickbats, broken glass panes, broken earthen pots etc. removal of stumps and other deleterious matter in the proposed building site including constant water pumping	23.2044	M3
190	190	Providing brick soling in foundation and floor with stone / best quality picked jhama brick, sand packed and laid to level and in panel after preparing the sub grade etc, if necessary dewatering complete- Brick on flat soling.	56.9	M2
191	191	Sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering, ramming etc complete as directed and specified including payment of land compensation, forest loyalty, sale tax and other duties and taxes as may be necess	17.04	M3
192	192	Providing & laying 25 mm thick Damp Proof Coarse with cement concrete in prop.1:1.5:3 with graded stone aggregate of 10 mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curi	3.02848	M2
193	193	Plain Cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be m	4.239	M3
194	194	Providing and laying R.C.C. work in proportion 1:1.5:3 including dewatering if necessary and curing complete but excluding cost form work and reinforcement for R.C.C. work as directed in sub structures up to plinth level -for foundation, footing ,column w
195	195	a) In sub-structure- Foundation, footing, tie beam and the like upto plinth level.	5.58	M3
196	196	b) In super structure-Lintel, chajja, column, beams, slab , stair case etc upto first floor level.	10.5035	M3
197	197	Supplying, fitting & fixing in position reinforcements bars conforming to relevant IS Code for R.C.C. work / RB Walling including straightening , cleaning , cutting and bending to proper shape & length as per detail, supplying and binding with 20G anne	20	Qntl
198	198	Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the sam	8.64	M2
199	199	b) C/s of tie beam	11.76	M2
200	200	c) Column, pier, post	54	M2
201	201	d) Sides and soffits beam, lintel, horizontal ties.	39.984	M2
202	202	e) Flat surface such as soffits of suspended floors, chajjas and the like.	50.8528	M2
203	203	Brick work in cement mortar with first class bricks including racking out joints and dewatering if necessary and curing complete as directed in sub structures up to plinth level with 1:5 mix mortar.	7.50402	M3
204	204	112 mm thick reinforced brick wall in proportion 1:5, reinforced with two lines of M.S. rod/ tor steel as specified embedded in 38mm thick concrete course in proportion 1:2:4 with coarse aggregate 12 mm down at every fourth courses embedded with protrudin	101.452	M2
205	205	Providing wood work in frames (chowkhat) of doors, windows, clearstory windows and other similar works in fixed in position in contact with C.C.or brick masonry wall including supplying , fitting and fixing with and M.S. hold fast (40mm X 3mm X 250) (a) With 1st class timber ( Hollock/Bonsum)	0.2352	M3
206	206	Providing, fitting and fixing fully glazed window without intermediate sash bars including oxidised M.S butt hinges (75mm x 60mm x 3.15mm) 2nos.on each leaf and 3 nos. on single leaf (glass panes to be measured and paid separately) W1200X1350	7.9704	M2
207	207	Providing and fixing clear sheet glass bedded in putty and fixed with / without wooden beadings including necessary cuttings of glass to required sizes (payment for wooden beads shall be made seperately).-5 mm thick. a) Area of glass panes exceeding 0.52 Sqm. W1200X1350	6.0264	M2
208	208	Providing, fitting and fixing 35mm thick full paneled doors/windows including oxidized M.S. butt hinges(100 mmX 75 mmX 3.55 mm) 6 nos. with necessary screws.- 35 mm thick shutter with 1st class Bola/ Gamari wood.	4.2444	M2
209	209	Supplying , fitting and fixing anodized aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete ( anodized
210	210	a) Sliding door bolts of size-250 mmX 16 mm	2	Nos.
211	211	b)Tower bolt- (i) 250mm X 12 mm	4	Nos.
212	212	(ii) 100mm X10mm dia tower bolt	12	Nos.
213	213	c) Door/ handle- (i) 150 mm size	4	Nos.
214	214	(ii) 100 mm size handle for window	6	Nos.
215	215	25 mm thick cement concrete topping 1:2:4 (1 cement: 2 coarse sand :4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish ( base concrete to be measured and paid separately) to be laid in panels including curing com	77.46	M2
216	216	Cement plaster skirting with cement mortar in proportion 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement including rounding of junction with floor 20 mm thick	29.88	M2
217	217	15 mm plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directe	181.36	M2
218	218	10mm thick cement plaster in single coat on fair side of brick/concrete wall for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80 mm girth and finished even and smooth including curing complete as directed.(APW	57.396	M2
219	219	Extra for plastering on ceiling and soffits of stairs up to first floor level ( instead of plastering on walls) including curing complete as directed In single coat plaster	57.396	M2
220	220	Extra for exterior plastering over wall up to a height of first floor level above G.L. including curing complete as directed In single coat plaster	105.6	M2
221	221	White washing with lime on wall surfaces (two coats) to give an even shade including thoroughly brooming the surfaces to remove all dirt, dust, mortar drops and other foreign matter and including preparing the surface even and sand papered smooth.	46.02	M2
222	222	Supplying, fitting, and fixing M.S. grills- Plain gerill fixed to wooden frame	107.738	Kg
223	223	Applying one coat cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth	192.736	M2
224	224	Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface( two coats) to give an even shade after thoroughly brooming the surfaces to remove all dirt and remains of all loose powdered mater	192.736	M2
225	225	Applying prime coat over new wood and wood based surfaces over 100 mm in girth/ width after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed white wood D1200X 2100 paneled door and W 1200X1350	19.584	M2
226	226	Painting two coats (excluding priming coat) over new wood and wood based surfaces over 100 mm in girth/ width with enamel paint of approved brand and manufacture ( Asian paint/ Berger Paint / ICI paint / J&N paint / Nerolac ) to give an even shade include	19.584	M2
227	227	Applying prime coat over new steel and other metal surfaces over 100 mm in girth/ width after preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper	2.52	M2
228	228	Painting two coats ( excluding priming coat) over new steel and other metal surfaces over 100 mm in girth/ width with enamel paint of approved brand and manufacture (Asian paint / Berger paint / ICI paint / J&n paint / Nerolac ) to give an even shade in	2.52	M2
229	229	G)Construction of security Fencing with Gate at Treatment Palnt site
230	230	Supplying, fitting and fixing galvanised barbed wire fencing with seven strands of barbed wire 12 S. W. G .x 2plies x 4 points at 75mm apart with angle iron intermediate fencing posts not more than 1800mm apart and straining and end post etc. as necessary to be fitted with straining eye bolts and staples etc. complete as directed, specification of the angle iron post as given below. \na) Intermediate post 35mm x35mm x5mm x1800mm long bottom torched and duly slotted.\nb) Straining post 65mm x 65mm x 6mm x 1820mm long with 2 stays of 35mmx35mmx1520mm long and 3 base plates 200mm x 200mm x 5mm, duly slotted to take eye bolts etc.\nc) Corner posts 65mm x 65mm x 6mm x1820mm long with 2 stays of 35mm x 35mm x 5mm x 1 670 mm and 3 base plates 200mm x 200mm x 5mm,duly slotted to take eye bolts etc. \nd) Straining or end posts 65mmx 65mm x 6mmx 1820mm long with 1 stays of 35mm x 35mm x 5mmx 1820 mm long with base plates 200mmx 200mm x 5mm, duly slotted to take eye bolts etc. \n(All the angle iron posts to be embeded 600mm in C.C.pillars of size 300mmx300mmx600mm in prop.1: 3: 6 and one coat of anticorrosive ready mixed painting to all iron works) including excavation of foundation trenches for C.C. blocks and refilling and removal of surplus soil after completion of works.\n	280	M
231	231	Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 40mm x 40mm x 6mm M.S. angle and with M.S. flat of 40mm x 6mm size as per approved design.Necessary locking arrangement for temporary closing the gate and 2nos.( minimum) st	3	Qtl
232	232	H)CONSTRUCTION OF ELECTRICAL PROWER LINE DRAWING AND SUBSTATION AT TREATEMENT PLANT AND DEEP TUBEWELL SITE
233	233	Supplying, installation testing and commissioning of the following rating copper wound indoor/outdoor type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended upto date upto200 KVA starrating upto 5star,above 200 KVA as per CEA guidelines for losses along with (i)63 KVA, 50Hz. 11/0.433KV. Oil filled transformer with Off Circuit tap change.	1	Nos.
234	234	(ii) 25 KVA 50Hz. 11/0.433KV. Oil filled transformer with Off Circuit tap change.	1	Nos.
235	235	Supplying and erection of PSC pole 7.50 m long the pole, the pole is to be erected in 1:2:4 plain cement concrete foundation of size 1.50m X 0.45m x 0.45m having PCC base foundation 15cmx 60cmx 60cm including edge brick soling and plasttering above GL portion(0.30m) complete with excavation of earth, handling of surplus soil, debris etc. to the proper place and refilling etc. as specified and as directed by the department. PSC pole 7.50 m long	6	Nos.
236	236	Supplying including installation of 100 mm dia C.I. Earth Pipe as required and directed by the Department.100 mm dia C.I. Earth Pipe	4	Nos.
237	237	Supplying including fitting and fixing G.I Channel X Arm 100X50X6 x2200 mm size as required and directed by the Department, including arrangement of Supervision Certificate from cmpetant authority of APDCL.G.I Channel X Arm 100X50X6 x2200	2	Nos.
238	238	Supplying including fitting and fixing 11 KV Disc Insulator, 70 KN in the existing MS Channel as required and directed by the Department. 11 KV Disc Insulator, 70 KN	10	Nos.
239	239	Supplying including fitting and fixing 11 KV Pin Insulator with pin as required and directed by the Department. 11 KV Pin Insulator	10	Nos.
240	240	Supplying and fixing of 11 KV, 400 A Gang Operated Switch with all accessories complete as required and directed by the Department. Gang Operated Switch,	2	Nos.
241	241	Supplying and fixing of 11 KV, 150 A D.O. Fuse set complete as required and directed by the Department. 11 KV, 150 A D.O. Fuse set	2	Nos.
242	242	Supplying and fixing of 11 KV, 5KA lighting arrestor(Poly) set complete as required and directed by the Department. 11 KV, 5KA lighting arrestor	2	Nos.
243	243	Supplying and erection of H.T. stay set complete (Galvanized) with 19mm dia x 1.8m long stay rod, anchor plate of size 30cm x 30cm x 6.4mm, thimble stay clamps, turn buckle (19mm x 60cm) 7/3.15 mm dia G.I. stay wire and strain insulator etc. in cement concrete 1:3 :6 mix foundation including excavation and refilling etc. as required by the department.H.T. stay set complete	4	Nos.
244	244	Supplying and fixing Pole Clamp of M.S. flat 50x6 mm complete as required and directed by the Department. POLE CLAMP	20	Nos.
245	245	Supplying and stringing up of AAA Rabit Conductor in the existing P.S.C./ M.S. /Galvanized pole with binding etc. as required and directed by the Department.AAA Rabit Conductor	360	Rm
246	246	Supplying and fittinf, fixing of galvanized L.T-T cross Arm with clamps, bolts, nuts etc. as required and directed by the Department. galvanized L.T-T cross Arm	10	Nos.
247	247	Supplying and erection of L.T. Pin Insulator with G.I.pin complete with bolts and nuts coach screw etc. as required and as required and directed by the Department. L.T. Pin Insulator	8	Nos.
248	248	Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed.c) M. S. bolts & nuts	50	Kg
249	249	Supplying including installation of 11 KV CT/PT combine metering system complete as required and directed by the Department.(Or as per APDCL) CT/PT combine metering system	2	Nos.
250	250	Supplying with fitting and fixing panel mounting open execution 50KA 415V 50Hz 4P MCCB (Ics=Icu, adustable Ir setting 0.5-1, neutral adjustable with earth fault protection and with rotary handle) (without enclosure) of the following capacity complete with making necessary connection as specified and directed by the deptt.- 50KA 415V 50Hz 4P MCCB ( Make- Schneider, Legrand, Siemens, Hager) 50KA 415V 50Hz 4P MCCB	2	Nos.
251	251	Supplying including installation of 100 mm dia C.I. Earth Pipe complete as required and directed by the Department. 100 mm dia C.I. Earth Pipe	7	Nos.
252	252	Supplying and fitting, fixing of H.T. Danger Plate as required and directed by the Department.100 mm dia C.I. Earth Pipe	4	Nos.
253	253	Supplying including fitting & fixing of P.G Clamp for Rabbit conductor as required and directed by the Department.P.G Clamp for Rabbit conductor	16	Nos.
254	254	Extra for using salt (5 kg) and Charcoal (64 kg} for pipe earth station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the department. salt and Charcoal \n	7	Nos.
255	255	Supplying , fitting & fixing of three phase energy meter as required and directed by the Department. Three phase energy	1	Nos.
256	256	(Supplying , fitting & fixing of metering cabinate as required and directed by the Department.metering cabinate	2	Nos.
257	257	Supplying , fitting & fixing of three phase LT/CT Trivector energy meter as required and directed by the Department.LT/CT Trivector energy meter	1	Nos.
258	258	Supplying , fitting & fixing of bio-metalic aluminium lugs (Assorted) as required and directed by the Department.bio-metalic aluminium lugs-Assorted	24	Nos.
259	259	Providing and laying 6 SWG., G.I earth wire (below GL) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the Department.6 SWG., G.I earth wire	80	Rm
260	260	Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laidup,PVC tape inner sheathed,Unarmoured/ Armour (Galvanised for cables upto 10x1.5 sqmm. 8x2.5 sqmm. 2x 10 sq mm. 3x10 sqmm. 4x6sqmm balance all galvanised steel strip), extruded PVC Type ST2 Sheathed, 650/ 1100V grade as per IS7098 (Part1)1988, U.G.cable laid in ground/ partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil,debriset to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/ CCI/ Polycab/Gloster /Finolex make)- 70.00 Sq.mm 3&1/2 Core U.G. cable in 40mm dia medium duty G.I. pipe .	40	Rm
261	261	Supplying and making end termination with Double compression brass gland with Nickel plated lugs for following size of PVC insulated and PVC sheathed / XLPE Al conductor cable of 1.1 KV grade as required.- Flame poof(CBF)-Size70 size:2.5-78,3-1/4\"	12	Nos.
262	262	Supplying including fitting & fixing of P.G Clamp for Rabbit conductor as required and directed by the Department.	16	Nos.
263	263	Providing barbed wire on the existing barbed wire fencing with seven strands of barbed wire 12 S.W. G.x 2pliesx 4 points at 75mm apart including supplying, fitting and fixing with galvanised staples 38mm x 38mm x 3mm sizes with existing posts of the fencing, including removing rotten barbed wire as directed, complete with strengthening of post and tightening of the old barbed wire and joinining old serviceable pieces on remaining lines as and where necessary and as directed.	40	Rm
264	264	Supplying and laying of HDPE pipe/duct IS-4984:1995 as required in the existing trench, through micro tunnelling as directed and specified by the Department.- 90 mm PE63 GRADE PN10	20	Rm
265	265	Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch(IP-20 protection) in powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the Department.- C&S, Havells, Indo Asian, HPL, GECO make-100 A Four Pole 415V Front handle operated On Load Change over switch	1	Nos.
266	266	Load security and supervision charge payable to APDCL as required and directed by the Department. 50KW load	50	KW
267	267	I) INTERNAL ELECTRIFICATION AT TREATEMENT PLANT
268	268	Wiring for light/fan / call bell point with 2x 1.5 sq. mm PVC insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolitic copper conductor for voltage grade upto 1100 volts (R.R Kebel/Finolex/Havells or equivalent Make as approved by the deptt) with flat 19 mm ISI marked casing 'n'capping (AKG/ Precision /Presto Plast/Polycab/MW or equivalent make as approved by the deptt.) in surface system, including 6 Amp flush type switch /bell push (Anchor Penta/Gold Medal/Kolor Kany.com/ Havells oe equivalent Make as approved by the deptt) , GI/MS switch board (ISI Marked) half conceale on wall with phenolic laminated sheet cover, Ceiling rose (Anchor/Gold Medal/Kolor Kany.com/ Havells oe equivalent Make as approved by the deptt) etc. complete as directed and as specified by the deptt.\n
269	269	a) Short point upto 3.00 metre length	8	point
270	270	b) Medium point upto 6.00 metre length	8	point
271	271	c) Long point upto 10.00 metre length.	12	point
272	272	Supplying and fixing 18 S.W.G. sheet metal boxes of following nominal size in surface wiring system fitted with suitable size phenolic laminated sheet covers in front face of the boxes including painting etc. as require and as specified by the department
273	273	200 mm. x 250 mm. X 60 mm. deep. (Nominal size)	2	Nos.
274	274	250 mm. x 350 mm. x 60 mm. deep. (Nominal size)	4	Nos.
275	275	Supplying and fixing of switch/socket on the existing board including connections etc. complete. (I.S.I. approved)
276	276	6 Amps flush type switch (one way)	20	Each
277	277	16 Amps flush type switch.	2	Each
278	278	3 Pin 6 Amps flush type socket outlets	4	Each
279	279	3 Pin 16 Amps flush type socket outlets.	2	Each
280	280	5 Pin 16 Amps flush type multi switch and socket outlets combined unit.	2	Each
281	281	Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolitic copper conductor for voltage grade upto 1100 volts (R.R Cable/ Finolex or equivalent Make as approved by the deptt.) in surface flat ISI marked casing 'n' capping (AKG /Precision/Presto Plast/ Polycab/MW or equivalent make as approved by the deptt.) system including earth continuity-
282	282	With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm in flat 19 mm ISI marked casing 'n' capping system.	120	Rm
283	283	With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. in flat 19 mm ISI marked casing 'n'capping system.	100	Rm
284	284	Supplying with fitting fixing of CFL/Flourescent luminaries complete with all accessories such as ballast, starter etc. directly on wall/ceilling including connection as approved by the deptt, with 1.5 sq. mm PVC insulated single core copper conductor as reqd. and as directed by the Deptt. Striplite luminaries complete with VPIT copper ballast/electronic balast and decorative end cap and 1 X36/ 40 watt. Flourescent tube. (Crompton Greaves make), Model- DSG1114LDB CROM GOLD/ DSG1114LDBN CROM GOLD NEW / DSG1314EB CG GOLD /DSG 1414 EB PLANET GOLD WITH super saver/super Brite lamp or equivalent ( equivalent will be selected by the deptt considering the mother items rate) PHILIPS/ WIPRO / HAVELS/ HPL/ SOLAR /JAQUAR MAKE.	12	Nos
285	285	Supplying, installation, testing and commissioning of following outdoor flood light of LED/MH/HPSV luminaries complete with all accessories such as ballast, capacitor, lamp, ignitor and driver as required complete with necessory support /foundation with 2.5 sqmm PVC insulated single core copper conductor as reqd. and as directed by the Deptt.-- MVC 502 1 xMHNTD-150W Philips make flood light luminaries with cast Aluminium housing and toughened glass cover including seperate CG box or equivalent ( equivalent will be selected by the deptt considering the mother items rate) BAJAJ/ WIPRO / HAVELS/ Crompton / HPL/ SOLAR/ JAQUAR MAKE.	5	Nos
286	286	Supplying including installation, commissioning of vermin and dust proof totally enclosed Phosphetised powder painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.95 M(B) x 1.20 M (H) x 0.40M (0) made of 16 SWG (1.66 MM) thick C.R. sheet and 40mm x40mmx 5 mm size angle having 4 Nos. legs at the bottom. The panal Board is to be erected in 1:3:6 PCC foundation including brick soling/grouting etc. complete neatly wiring done with provision for one no 800 A, 4 pole MCCB or switch fuse unit as incomer and provision for 4 Nos DP or TPN outgoing as specified and as directed by the department conforming to IP-43 protection comprising of the following electrical items:\n1) 50mm x 10mm 4 strip copper Bus-Bar 1.20 M length each-4 set\n2) 20mm x 3mm 4 strip copper Bus-Bar 0.50 M length each-4 set\n3. Digital 3 phase Voltmeter Accuracy class 0.50- 1 Nos\n4. Digital 3 phase Ammeter Accuracy class 0.50- 1 Nos\n5. Pilot Lamp with integral Circuit LED 110-230 V (Red, Yellow & Blue)- 3 Nos.\n6. Voltmeter & Ammeter Selector Switch-2 Nos.\n7. 2A Slide fuse unit- 3 Nos\n(Outgoing Switch Gear of reqd. rating will be measured and paid separately )\n	1	Nos
287	287	Supplying with fitting and fixing panel mounting open execution 50KA 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu), adjustable Overload and short Circuit setting , without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. [ABB/ Schneider,/ Legrand/ L&T, Siemens/ Hager C&S Make)- 100 A. ( For 3 Nos 40HP RWPS and one for transformer site= 4 Nos)	4	Nos
288	288	Supplying with fitting and fixing 4P, 10 KA 415V 50Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.- C series [ABB, Schneider MG, Legrand, Hagger, Crabtree Xpro make]- 6 to 32 A ( For Vaccum pump and lighting the internal & external area-4 Nos)	4	Nos
289	289	Supplying of vacuum pump starter for 3HP (DOL)	2	Nos
290	290	Supplying with fitting and fixing including necessary connection as approved by the department D.O.L Starter (Cromton Greaves/ Control and switch gear/ BCH/L&T/ Siemens Make) of following type and capacity as specified and directed by the deptt. D.O.L starter-25HP, 24 to 39A (2 Nos for CWP & 1 standby)	3	Nos
291	291	Supply and laying of following size solid aluminium conductor up to 10 sq. mm balance stranded conductor, XLPE insulated, cores laid up, PVC tape inner sheathed, unarmoured/ Armoured (Aluminium for single core upto 70 sq mm balance aluminium strip), Galvanised for cables upto 2x10 sqmm, 3x10 sqmm,4x6 sqmm balance all galvanised steel strip), extruded PVC Type ST2 sheathed, 650 /1100 V grade as per IS:7908 (Part-1) 1988 laid in air or through existing cable trench /duct /cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the depertment (Nicco/ Havells/ RPG/CCI/ Polycab/Gloster / Finolex make or equivalent)-
292	292	4 mm2 3 core armoured Cable (panel to external light post 8 nos x 20m av length )	130	Mtr
293	293	a) 6mm2 3 core armoured Cable (panel to Vaccum pumps)	18	Mtr
294	294	b) 50.00 mm2 3&1/2 core armoured Cable (panel to 2 Nos of starter for Clear water pumps)	56	Rm
295	295	c) 95 Sq.mm 3 and 1/2 core armoured cable (transformer to Panel Board- 150 Rm)	130	Rm
296	296	Supply with installation & commissioning of readymade maintenancefree CPRI approved chemical earthing system with 50MM dia. .00 Metres length corrossion free dualpipe technology G.I. CHEM ROD EELECTRODE complete with RESLOW Grounding Minerals (25KG) and Advance Earth Pit cover (PVC) including excavation of earthpit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt.	2	Nos
297	297	Supplying and laying of 25x6 mm size G.I. strips drawn of surface from earth electrode to Electrical switch gears, machineries etc. complete with supply of G.I. nuts & bolts, screws etc complete etc. including riveting, soldering & making necessary connection as approved, specified and directed by the department.	40	Rm
298	298	Supplying with fitting and fixing of the following integral type street light luminaries complete and consisting of single piece integral opexy gray powder coated dia cast alluminium housing gasket, pot optic reflector, cast alluminium frame from heat resistance toughened clear glass cover and accessories such as Condenser, lamp holder, Balast, lamp etc. in the existing pole including making necessary connection as approved by the deptt. with 2 x 2.50 sq mm F.R multi stand and P.V.C insulated single core copper cable as specified and directed by the department.= Philips make Cat. No-SRP 308 1XSON 70W FG for lamp SON70W /cROMPTON GREAVES make-SSSG12071H/FG FOR LAMP 1X70W HPSV/ HAVELS MAKE-LHRS13170A99 FOR LAMP1X70W SON -E	12	Nos
299	299	Supplying including fitting fixing of high speed A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connections etc. as required complete and as directed by the Department [Without regulator].- Standard model 1200mm sweep (Usha make)	6	Nos
300	300	Supplying including fitting fixing of Electronic STEP Type Regulator for ceiling fan complete with all connections in the existing board as required complete and as directed by the department.	6	Nos
301	301	J)ESTIMATE FOR SUBMERSIBLE AND CENTRIFUGAL PUMPING SETS
302	302	Supply, installation, testing and commissioning of electrical driven Submersible Raw water pumping set (couple type) suitable for operation with 415 (+10 %) V, 3-phase, 50 Hz + 3% power supply with panel board including Star Delta starter (AC incorporating incomer MCCB, three air break contactors for main/delta/star as required) etc. with suitable size/capacity & following specification of pump/ motor along with all accessories such as bends, non return valves, sluice valve, clamps with nuts & bolts, clips etc. in all respect (excluding rising delivery pipes and specials fitting, fixing & testing etc.).Discharge 32.16 LPS, Head 45 M , Length of Raw Water Pumping Main=1500.M)\nSupplying and fixing required size of copper cable ( branded ) for power line from pane board to starter and starter to motors as per specifications of the above mentioned pumping sets. 70.00 sqrm\nSupplying, placing, laying, fitting and fixing of suction / delivery of 100 mm dia G.I pipes (TATA, Medium) along with its accessories/specials etc. as per requirement in the field for the above mentioned pumping set as per specifications.\n	60	HP
303	303	Supply, installation, testing and commissioning of electrical driven Centrifugal clear water pumping set (couple type) suitable for operation with 415 (+10 %) V, 3-phase, 50 Hz + 3% power supply with panel board including Star Delta starter (AC incorporating incomer MCCB, three air break contactors for main/delta/star complete set as required) etc. with suitable size/capacity & following specification of pump/ motor along with all accessories such as base frame, coupling, guard foundation, bends, non return valves, sluice valve, clamps with nuts & bolts, clips etc. in all respect including construction of foundation all complete including suction and delivery mains/pipes, specials, fitting, fixing etc..\nSpecification:\nHorizontal split casing centrifugal pump type\nRPM of Motors be 1400 to 1500\nConstruction materials – cast iron casing, stainless steel shaft, Bronze impeller.\nHead -35 .00 M\nRPM -1400 to 1500 \nDischarge -32.64 LPS\nCasing -Cast Iron\nShaft -Stainless steel\nImpeller -Bronze Iron\nLength of clear water Pumping Main -100.00M\n	65	HP
304	304	K) Road restoration Work
305	305	Construction of granular sub-base by providing coarse graded material , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place methof with rotavator at MC, and compacting with vibratory roller to achieve the desired density , complete as per cl.401 (with an initial lead of 5 km.)
306	306	100 mm dia --3280 meter	262.4	Cum
307	307	150 mm dia --1440 meter	122.4	Cum
308	308	200 mm dia --289.60 meter	26.05	Cum
309	309	250 mm dia -841.60 meter	79.95	Cum
310	310	300 mm dia --1008.80 meter	100.88	Cum
311	311	Providing laying ,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with vibratory roller 8 to 10 tonnes instag3es to proper grade and camper ,applying and brooming requisite type of binding material to fill up the interstices’ of coarse aggregate watering and compacting to the required (with an initial lead of 5.0 km)WBM Gr. II
312	312	100 mm dia --3280 meter	196.8	Cum
313	313	150 mm dia --1440 meter	91.8	Cum
314	314	200 mm dia --289.60 meter	19.55	Cum
315	315	250 mm dia -841.60 meter	59.96	Cum
316	316	300 mm dia --1008.80 meter	75.66	Cum
317	317	Providing laying ,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with vibratory roller 8 to 10 tonnes instag3es to proper grade and camper ,applying and brooming requisite type of binding material to fill up the interstices’ of coarse aggregate watering and compacting to the required (with an initial lead of 5.0 km)WBM Gr. III
318	318	100 mm dia --3280 meter	196.8	Cum
319	319	150 mm dia --1440 meter	91.8	Cum
320	320	200 mm dia --289.60 meter	19.55	Cum
321	321	250 mm dia -841.60 meter	59.96	Cum
322	322	300 mm dia --1008.80 meter	75.66	Cum
323	323	Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical with the bitumen emulsion CSS-1h.
324	324	100 mm dia --3280 meter	196.8	Cum
325	325	150 mm dia --1440 meter	91.8	Cum
326	326	200 mm dia --289.60 meter	19.55	Cum
327	327	250 mm dia -841.60 meter	59.96	Cum
328	328	300 mm dia --1008.80 meter	75.66	Cum
329	329	Open graded premix surfacing /Mixed seal surfacing (Mechanical means using HMP of capacity not less than 75 tonnes/hour. Providing, laying and rolling of open graded premix surfacing of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates either using penetration grade bitumen (60/70 grade) or bitumen emulsion to required line, grade and level to serve as wearing coarse on a previously prepared base, including mixing in a suitable plant laying and rolling with a smooth wheeled roller 8-10 T capacity to the road level and grade.(Including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 km initial lead from mixing plant) ( Including cost of testing of materials at site and laboratory as directed by the deptt.)
330	330	100 mm dia --3280 meter	196.8	Cum
331	331	150 mm dia --1440 meter	91.8	Cum
332	332	200 mm dia --289.60 meter	19.55	Cum
333	333	250 mm dia -841.60 meter	59.96	Cum
334	334	300 mm dia --1008.80 meter	75.66	Cum
335	335	Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats.) (Including carriage up to initial lead of 5.0 km from quarry) (Including cost of testing of materials at site and laboratory as directed by the deptt.)
336	336	100 mm dia --3280 meter	196.8	Cum
337	337	150 mm dia --1440 meter	91.8	Cum
338	338	200 mm dia --289.60 meter	19.55	Cum
339	339	250 mm dia -841.60 meter	59.96	Cum
340	340	300 mm dia --1008.80 meter	75.66	Cum
341	341	L) DEVELOPMENT OF TWO NOS DEEP TUBE WELLS
342	342	Transportation of air compressor from the Divisional Head Quarter to the drilling site with all accessories including cost of P.O.L. all complete as directed.Upto 100.00 Km distance from Divisional H.Q	60	Per Km
343	343	Transportation of P.O.L. all complete as directed	30	Litre
344	344	Construction of temporary accommodation and low cost sanitary facility for drilling staff including cost of camp materials viz. cots, tables, chairs, utensils, dresses, safety helmets etc. and dismantling the accommodation after completion of the work all complete as directed.	1	job
345	345	Developing of the D.T.W. with air compressor,( For 2 nos Deep Tube Well -- 60 hours x 2 nos )	120	hour

Also Visit

Tenders

Assam Tenders

Distribution and Conditioning Tenders

Pumps Tenders

Submersible Pump Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Augmentation Of Dergaon Water Supply Scheme Execution , Testing And Commissioning Of 2 . 35 Mld Capacity Treatment Plant , Distribution , Raw Water Pumping Main , Submersible , Centrifugal Pumping Sets , Electrical Internal , External And Drawing, Dergaon Water Supply Scheme-Assam

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Augmentation Of Dergaon Water Supply Scheme Execution , Testing And Commissioning Of 2 . 35 Mld Capacity Treatment Plant , Distribution , Raw Water Pumping Main , Submersible , Centrifugal Pumping Sets , Electrical Internal , External And Drawing, Dergaon Water Supply Scheme-Assam

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us