Banaras Hindu University-BHU has published Replacement Of Roof Sheet And Flooring Of Machine Ghar At Ayurvedic Pharmacy , B . H . U. Submission Date for this Tender is 29-07-2020. Flooring Work Tenders in UWD BHU VARANASI Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work:- Replacement of roof sheet and flooring of Machine Ghar at Ayurvedic Pharmacy, B.H.U. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and\napplying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.\nHot finished welded type tubes (10.16.1) | 1500 | kg | |
| 2 | 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)\n0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (12.50) | 409 | Sqm | |
| 3 | 3 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete \nRidges plain (500 - 600mm) (12.51.1) | 38 | metre | |
| 4 | 4 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:\n Asbestos sheet (15.28.2) | 409 | Sqm | |
| 5 | 5 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement\nmortar 1 : 4 (1 cement : 4 coarse sand) :\n25 mm thick (11.26.1) | 331 | Sqm | |
| 6 | 6 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3\ncoarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (11.27) | 17 | Sqm | |
| 7 | 7 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction\nof Engineer - in - charge.\nNominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (15.2.1) | 23 | cum | |
| 8 | 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\n "1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). (4.1.3) | 6 | cum | |
| 9 | 9 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to\nscratches etc. complete (14.43) | 500 | Sqm | |
| 10 | 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall\nsurface to prepare the surface even and smooth complete. (13.80) | 500 | Sqm | |
| 11 | 11 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :\nNew work (two or more coats) over and including water thinnable priming coat with cement primer (13.41.1) | 500 | Sqm | |
| 12 | 12 | Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade :\nOne or more coats on old work (14.54.1) | 45 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
