Construction Of Additional Class Rooms 05 Nos . In Govt . Sr . Sec . School Faqarsar Theri Under Samagra Sikhsha Abhiyan ( 2019-2020 )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2020
0 days left
EMD
63700
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gidderbaha → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Additional Class Rooms 05 Nos . In Govt . Sr . Sec . School Faqarsar Theri Under Samagra Sikhsha Abhiyan ( 2019-2020 )
BOQ
| Name of Work: Construction of 05 Nos. Additional Class Rooms in Govt. Senior Secondary School, Village Faqarsar (Distt. Shri Muktsar Sahib) Under SAMAGRA SHIKSHA ABHIYAN 2019-20 Under Head 8443 Civil Deposit (Year 2019-20) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres. | BI01010001010000000000000515BI0100001113 | 137.9 | Per Cum |
| 2 | 2 | Cement Concrete 1:8:16 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type | BI01010001010000000000000515BI0100001114 | 35.28 | Per Cum |
| 3 | 3 | First class burnt brick work laid in cement sand mortar 1:7 in foundation and plinth. | BI01010001010000000000000515BI0100001115 | 55.02 | Per Cum |
| 4 | 4 | First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. | BI01010001010000000000000515BI0100001117 | 11.34 | Per Cum |
| 5 | 5 | Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. | BI01010001010000000000000515BI0100001118 | 14.31 | Per Cum |
| 6 | 6 | First class burnt brick work laid in cement sand mortar 1:6 first storey upto 4 metres above plinth level. | BI01010001010000000000000515BI0100001119 | 66.49 | Per Cum |
| 7 | 7 | Reinforced cement concrete M-20 mech batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. | BI01010001010000000000000515BI0100001120 | 61.64 | Per Cum |
| 8 | 8 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) | BI01010001010000000000000515BI0100001121 | 123.2 | Per Sqm |
| 9 | 9 | Centering and shuttering for colomns (square or rectangular or polygonal plain) | BI01010001010000000000000515BI0100001122 | 35.34 | Per Sqm |
| 10 | 10 | Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels | BI01010001010000000000000515BI0100001123 | 185.3 | Per Sqm |
| 11 | 11 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. | BI01010001010000000000000515BI0100001125 | 332.89 | Per Sqm |
| 12 | 12 | 10 mm thick cement plaster 1:4 | 29.41 | Per Sqm | |
| 13 | 13 | 12.5 mm thick cement plaster 1:4. | 400.93 | Per Sqm | |
| 14 | 14 | 20 mm thick cement plaster 1:4 in two coats work. | 524.51 | Per Sqm | |
| 15 | 15 | Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item) | 36.59 | Per Rmt | |
| 16 | 16 | Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. | 20 | Each | |
| 17 | 17 | Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. | 40 | Each | |
| 18 | 18 | Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. | 10 | Each | |
| 19 | 19 | Providing and fixing in position gratings 150mmx150mm for gully trap. PVC grating. | 20 | Each | |
| 20 | 20 | Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on- edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3. | 10 | Each | |
| 21 | 21 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. | 123.32 | Per Rmt | |
| 22 | 22 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres. | 65.36 | Per Cum | |
| 23 | 23 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taken only from outside the premises laying in plinth in 15 cm layers including ramming, watering and consolidating including all leads. | 43.57 | Per Cum | |
| 24 | 24 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling | 305.39 | Per Sqm | |
| 25 | 25 | Kota stone tile flooring 20mm to 30 mm thick over 12.5mm thick base of cement mortar 1:3 (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing. | 305.39 | Per Sqm | |
| 26 | 26 | Kotah stone tile 20mm thick in skirting, riser of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 Cement and 3 Sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing | 18.16 | Per Sqm | |
| 27 | 27 | Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 25mm mud plaster, 75 mm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot @ 1.65 Kg. per Sqm. on top of R.C.C slab including grouting with cement | 305.67 | Per Sqm | |
| 28 | 28 | Supplying and fixing of Pressed steel sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiveing tower bolts and finished with 2 coats of ready mixed painted lead non setting primer of approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete. Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter. | 313.38 | Per Rmt | |
| 29 | 29 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973, Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm thick | 21.96 | Per Sqm | |
| 30 | 30 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)\nFor shutter area above 0.50 sqm | 21.96 | Per Sqm | |
| 31 | 31 | Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete \n300mm x 16mm. | 10 | Each | |
| 32 | 32 | Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitred and electrically flash-welded, with iron fittings incluidng necessary iron handles,hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire guage) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire guage and grill will be paid as per respective items) | 1050 | Per Kg | |
| 33 | 33 | Extra for providing & fixing steel tube beading size 12mmx12mm, 18 gauge of approved shape and sections with screw for fixing of glass panes in stead of glazing clips and metal slash putty in steel doors, windows and ventilaors complete in all respect. | 320.12 | Per Rmt | |
| 34 | 34 | Wire gauge fixed on steel windows of standard rolled steel sections with 3mm thick flat iron cover moulding of 12.5 width, fixed with machine screws, complete in all respects. | 24.4 | Per Sqm | |
| 35 | 35 | Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position. | 9.03 | Per Qtl. | |
| 36 | 36 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm thick above 0.40 sqm area. | 53.67 | Per Sqm | |
| 37 | 37 | Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete | 69.79 | Per Qtl. | |
| 38 | 38 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. | 925.44 | Per Sqm | |
| 39 | 39 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade. | 925.44 | Per Sqm | |
| 40 | 40 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface | 925.44 | Per Sqm | |
| 41 | 41 | Applying priming coat with metal primer on new steel or iron work including preparation of surface with ordinary quality paint. | 151.01 | Per Sqm | |
| 42 | 42 | Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work. With special quality Paint | 151.01 | Per Cum | |
| 43 | 43 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. | 21.96 | Per Sqm | |
| 44 | 44 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. With ordinary quality Paint | 21.96 | Per Sqm | |
| 45 | 45 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. With ordinary quality Paint | 21.96 | Per Sqm | |
| 46 | 46 | Construction of Plinth Protection Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres. | 5.87 | Per Cum | |
| 47 | 47 | Cement Concrete 1:8:16 with 40mm guage stone aggregate using mechanical mixer. | 5.93 | Per Cum | |
| 48 | 48 | Precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints and over the base for floors, treads of steps and landings. | 66.5 | Per Sqm | |
| 49 | 49 | Providing and laying sand filling under Ramp including compensation of Earth, Loading, Unloading, Carriage to site work, spreading, grading to require slope and compating to meet requirement complete in all respects. | 0.51 | Per Cum | |
| 50 | 50 | Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type | 1.25 | Per Cum | |
| 51 | 51 | 12.5 mm thick cement plaster 1:4 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge in demp proof course (1B) with two coats of bitumen at 1.65 kg per Sqm laid that and standard | 40.31 | Per Sqm | |
| 52 | 52 | ELECTRICAL SERVICES : RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge,PVC, fire retardant conduit pipe 20mm/25mm dia. ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp./16/20Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches/sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) PVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases.\nMake:- PVC Pipe = Anchor,polycab, Adarsh Plast,NORPACK\nPVC Copper Wires = Polycab, Rallison, RR Kabel, Ecko, Havell's Modular Accessories = Wipro NorthWest (Nowa), Legrand (Britzy), Shhneider(Livia), Havell's Crabtree (Athena),GoldMedal(Nixon),C&S(Divino) | |||
| 53 | 53 | Wiring fan point with sheet metal fan box (shapehexagonal) in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts. | 20 | Per Point | |
| 54 | 54 | Wiring light point in PVC insulated copper conductor singlecore FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade. | 41 | Per Point | |
| 55 | 55 | PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE:\nSupply and erection of PVC insulated single core FR copper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing. Make:- Polycab, RR Kabel, Havell's, | |||
| 56 | 56 | PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq.mm, 1100volts grade | 90 | Per Mtr | |
| 57 | 57 | PVC insulated copper conductor single core FR cable (ISI marked) overall 2.5 sq.mm, 1100volts grade | 60 | Per Mtr | |
| 58 | 58 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES:\nSupply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications 2010. | |||
| 59 | 59 | HDPE electrical conduit pipe 25mm dia. (ISI marked) Flushed | 25 | Per Mtr | |
| 60 | 60 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:\nSupply and erection of sheet metal double door distribution boards of suitable size and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles and bonding to existing earth etc Make:- GROUP-B: (Havell's, HPL, ABB, Standard, GEC, Alsothom, Hagger, Goldmedal & other brands approved by PWD). | |||
| 61 | 61 | Sheet metal double door S.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating MCB's/ RCBO/ RCCB's 4 way Each. | 1 | Each | |
| 62 | 62 | MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: Supply and erection of sheet metal double door distribution boards of suitable size and of required no. of ways for mounting Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs. Make:-GROUP-B: (Havell's, HPL, ABB, Standard, GEC, Alsothom, Hagger, Goldmedal & other brands approved by PWD). | |||
| 63 | 63 | Miniature circuit breaker single pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply | 2 | Each | |
| 64 | 64 | Miniature circuit breaker double pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply | 1 | Each | |
| 65 | 65 | G.I. EARTHING: Earthing of Sheet metal/ iron clad Switches and metallic cases etc., with No. 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe partly on surface complete with 135cm long 50mm dia. G.I. earth pipe with G.I. reducing socket (50mm x 15mm) including erection of the same, 4 metre below ground level with necessary charcoal & salt mixture etc., up to 7 metre in length (including boring & refilling). | 1 | Each | |
| 66 | 66 | XLPE/ PVC INSULATED UN-ARMOURED CABLES (LOOSE IN THE EXISTING TRENCH OR PIPE):\nSupply and laying of XLPE/ P.V.C. insulated P.V.C. sheathed aluminium conductor un-armoured cable working voltage upto and including 1100 volts grade to be laid loose in the existing trench or pipe as per PWD General Specifications 2010:- Make:- Polycab,Havells,RR Kabel. | |||
| 67 | 67 | XLPE/ PVC insulated PVC sheathed aluminium conductor unarmoured cable working voltage 1100volts grade 6sq.mm (Twin Core) | 60 | Per Mtr | |
| 68 | 68 | DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: Supply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation (making necessary trench), placing the pipe in position and back filling with excavated soil etc. of the required size. Make:-Duraline, Telerex,Gemini, CPE. | |||
| 69 | 69 | Double walled corrugated (DWC) HDPE pipe 50/38mm (outer/ inner dia.) | BI01010001010000000000000515BI0100001124 | 50 | Per Mtr |
| 70 | 70 | SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets, power switch and sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including connections and petty material etc. Make:- Fine, SSK, Anchor | |||
| 71 | 71 | Bakelite batten holder large size | 5 | Each | |
| 72 | 72 | Supply and erection of LED batton 20watt LED (including LED driver) with High quality extruded aluminium with efficiency of LED fixture more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no ATPB/20/GL Dated 30/11/2017. Make:-C&S LLTTB4F20W LED/W/ Jaquar LGLZ01X020XC / Philips BN02IC LED20S PSU CDL GR/ Crompton LCTL-18-CDL/ Syska SSK-ALB-20W /polycab INENSO DLX LED BSTTEN 4 FT 20W/ Halonix HLB-03-20-CW-AL. | 30 | Each | |
| 73 | 73 | Supply and erection of Ceiling Fans 1200 Sweep 48\" having two ball bearing including flexible wire & petty material etc.complete in all respects as appd. and desired by the Engineer in-charge at site. makes:- Crompton Entrust 50-5 Star Opel White/ Havell's ES-50/ Polycab Synergy-50/ Anchor Panta Turbo Star code 13671WH/ V-Gaurd Coolgae 5 star 48. | 20 | Each | |
| 74 | 74 | Supply and erection of Heavy duty Exhust Fans 300mm 900RPM with aluminium louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site.Make:- Crompton EXHD300-6-1 /Havells Turbo Force SP/ Bajaj Supreme plus. | 1 | Each | |
| 75 | 75 | Supply and erection of LED street light 25watt with pressure die cast aluminium housing with control gear (with IP 65/ IP 66 protection), toughened glass fitting and efficacy of LED fixture minimum 100 lumens per watt complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no ATPB/20/GL Dated 30/11/2017. Make:-Havell's LHETAXU7PA6S025/ Wipro LR02-291-XXX-57-XX/ Jaquar LSRT01S025XC. | 5 | Each | |
| 76 | 76 | Supply and erection of high quality 9w LED Lamp Complete in all respects as approved and desired by the Engineer in charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no ATPB/20/GL Dated 30/11/2017. Make Crompton smart / Orient Eternal shine/ Halonix photon plus. | 5 | Each |
AI Tender Summary
Tender Timeline
Jul 21, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 03, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender