Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-07-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-08-2020 |
| 2 | 29-07-2020 | Corrigendum1 | Other | 30-07-2020 |
| Nature of Work: IMPROVEMENT TO AIRMMEN BILLET AT 13 BRD, AF UNDER GE (P) AF GURGAON | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling of existing roof tiles/ roof treatment from roof and parapet of any description and removing the rubbish comlete all as specified and directed. | 1610 | Sqm | |
| 2 | 2 | Cleaning top surfaces by brooming, wire brushing, removing grass, raking out joints to receive plaster and removing debris, grass etc outside the defence land complete all as specified and directed. \nNote :-(i) Plaster shall be measured and separately under appropriate item of Sch ‘A’. (ii) Rate are inclusive of disconnect fitment at water tank or solar heater etc and refixing in the same position after compeleting of roof treatment. | 1610 | Sqm | |
| 3 | 3 | M&L for 15 mm thick cement plastering in cement mortar 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and as directed. Note :- Water proofing compound shall be measured & paid separately under respective item of this schedule. | 1610 | Sqm | |
| 4 | 4 | Supply only liquid water proofing compound of approved make by GE. | 75 | Litre | |
| 5 | 5 | M&L for applying 3.00mm thick APP based polymer membrane by toarch application for sealing joints over 85/25 industrial bitiminous coat @1.20Kg/Sqm over bituminous primer @ 3.00 Ltr /Sqm on newly plastered clean surface and dry roof surface complete all as specified and directed by Engineer-in-Charge.\n \n\n | 1610 | Sqm | |
| 6 | 6 | Dismantling of RCC chajja, fin, roof parapet, roof beam and slab of any description and removing all debries etc outside the defence land complete all as specified and directed. | 25 | Cum | |
| 7 | 7 | M & L for RCC ( 1:1.5:3) type A1, using 20mm graded stone aggregate as in chajjas including necessary scaffolding up to 4th floor complete all as specified and directed. | 10 | Cum | |
| 8 | 8 | M & L for RCC ( 1:1.5:3) type A1, using 20mm graded stone aggregate as in roof beam and slabs, including necessary scafolding up to 4th floor complete all as specified and directed. | 15 | Cum | |
| 9 | 9 | M&L for form work to edges of concrete flat, roof slabs not exceeding 200 mm thick shelves etc for rough finished surfaces complete all as specified and directed. | 50 | Rm | |
| 10 | 10 | M&L for form work to soffits of suspended slab such as roof slab floor slabs landings and similar work not exce 200mm thick (horizontal or scopes) fair finished complete all as specified and directed. | 100 | Sqm | |
| 11 | 11 | S&F mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping etc and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. | 1650 | Kg | |
| 12 | 12 | Repairing and strengthning of existing RCC structure by re-baring by drilling holes and fixing nozzle if required in existing concrete/brick work as in column, beams, slabs and chajja etc in any position and any description size of hole 14mm, 16mm & 22mm suitable for dowels of size 10mm, 12mm & 16mm respectively (minimum depth 140mm for 10mm & 12 mm dia bars and 180mm for 16mm dia bar, cleaning the surface properly with blow out pump & round brushes and fixing of dowel bars with epoxy resin (resin+hardner). Make: Sika, Fosroc or concressive 1450 of BASF complete all as per manufacturer instruction, specified and directed.\nNote:- (i) Adequate lap length shall be provided as per IS-456-2000.\n(ii) Reinforced TMT bars where incorporated in work will be paid under seperate items. \n(iii) The work shall be carried out upto four storied building with scaffolding. | 100 | Sqm | |
| 13 | 13 | M&L for mild steel angle iron work as in Jacketing of existing column by cutting welding making holes and fixing by using angle iron/flat iron of FE-410 W grade complete including necessary scaffolding upto four Storey building all as specified and as directed. | 150 | Kg | |
| 14 | 14 | Taking down Cement plaster upto 4th floor including necessary scafolding, any description on Brick walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. | 3520 | Sqm | |
| 15 | 15 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. \nNote:- Forming grooves shall be measured and paid separately under respective item of this schedule. | 2000 | Sqm | |
| 16 | 16 | M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. | 2500 | Rm | |
| 17 | 17 | M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement complete all as specified and directed. | 620 | Sqm | |
| 18 | 18 | M&L for 5mm thick rendering in cement mortar 1:3 on concrete/guniting surface as in ceiling using machine finished even and smooth w/o using extra complete all as specified and directed. | 250 | Sqm | |
| 19 | 19 | M&L for 15mm thick rendering on brick or concrete surfaces in internal surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed. | 1070 | Sqm | |
| 20 | 20 | M&L for preparation of newely plastered ceiling surface and applying three coats of white wash complete and all as specified and directed. | 250 | Sqm | |
| 21 | 21 | M&L for preparing new decorated surfaces plastered on walls including cornices plasters by brooming down or steel wire brusing, scraping down, smoke spots and M&L for applying two coat of exterior emulsion paint 100% acrylic of approved colour and shade by accepting officer complete over a coat of primer and over 2 to 3 mm thick birla putty punning complete all as specified and directed.\nMake-Asian (Apex Ultima) paints/Berger (Whether Dust proof coat long life) including necessary scaffolding upto 4th floor. | 620 | Sqm | |
| 22 | 22 | M&L for preparing new decorated surfaces plastered on walls including cornices plasters by brooming down or steel wire brusing, scraping down, smoke spots and applying two coat of oil emulsion over a coat of primer complete and over 2 to 3 mm thick birla putty punning and to be applied by authorized applicator of manufacture's as approved by GE complete all as specified or as directed. Make: Asian Paint (Tractor)/Berger paints (Bison super) including necessary scaffolding upto 4th floor. | 1070 | Sqm | |
| 23 | 23 | Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed. | 26 | Cum | |
| 24 | 24 | Cleaning of existing drain/ excavation in trenches n exc 1.50m wide and n exc 1.50m deep and getting out in soft/loose soil complete all as specified and directed. | 120 | Cum | |
| 25 | 25 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed. | 25 | Cum | |
| 26 | 26 | M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed. | 72 | Cum | |
| 27 | 27 | M&L plain cement concrete 1:2:4 type B-1 using 20mm grade stone aggregate for coping, benching, bed block for flooring, rungs, window cills etc complete all as specified and directed. | 6 | Cum | |
| 28 | 28 | M&L for 450mm dia RCC pipe class NP-2 laid and jointed complete with collars complete all as specified and directed. | 50 | Rm | |
| 29 | 29 | M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed to drain pipe including packing under and completely surrounding pipes with concrete after they are laid and tested for 450 mm dia complete all as specified and directed. | 50 | Rm | |
| 30 | 30 | Returning filling with excavated soil in layers n exc 25cm thick including spreading, levelling, watering and well ramming complete all as specified and directed. | 42 | Cum | |
| 31 | 31 | Removal of debris/malwa to a distance exc 10 KM but n exc 15.00 KM out side MD land and depositing where as directed. | 350 | Cum | |
| 32 | 32 | Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed. | 35 | Cum | |
| 33 | 33 | M&L for broken stone or boulders hardcore of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface. | 20 | Cum | |
| 34 | 34 | M&L for 75 mm thick cement concrete 1:3:6 40mm graded stone aggregate as in plinth protcetion and courtyard,sub base finished cement surfaces even and smooth/fair with out using extra cement complete all as specified and directed. | 210 | Sqm | |
| 35 | 35 | Dismantling of Stone slabs and tiles of any description or thickness in floor orwall, aprons and laid badded and pointed in any mortar. etc | 106 | Sqm | |
| 36 | 36 | M&L cement concrete 1:2:4 using 12.5mm graded stone aggregate 25 mm thick, as in Floors, etc., and finished the Cement Concrete Surfaces even and fair with using extra cement complete all as specified and as directed. | 300 | Sqm | |
| 37 | 37 | M&L Non–Skid ceramic joint free Coloured Tiles, exc 0.18 sqm and n.exc 0.36 sqm each tile, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match Dark Shad including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. | 300 | Sqm | |
| 38 | 38 | M&L Glazed Ceramic Coloured Tiles, 300X450X7mm to 10mm in size, set on vertical surfaces such as skirting, dado, etc,over and including 10mm thick screed bed in cement mortar 1:3 Set and Jointed in neat cement slurry and jointed in white or coloured cement to match the shade of the tiles, complete all as specified and as directed. | 280 | Sqm | |
| 39 | 39 | S & F vitrified Tiles light shade 10mm thick (square/rectangular) polished, area of each tile n.exc. 0.36 sqm, in floor etc.,set and jointed in neat cement slurry over & including 15mm thick screed bed in cement mortar 1:4 and pointed in white or coloured cement with pigment to match for laying floor finishes complete all as specified and as directed.. | 200 | Sqm | |
| 40 | 40 | M&L Non–Skid ceramic joint free Coloured Tiles, size600x600x10mm in size, laid on floor, laid and jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the shade of the Tiles,incl. Screed Bed or Bedding Layer 15mm thick as in Floor in Cement Mortar 1:4 complete all as specified and as directed. | 250 | Sqm | |
| 41 | 41 | M&L ceramic joint free Coloured Tiles, size 600x100/150mm x10mm in size, vertical Laid and Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the shade of the Tiles,incl. Screed Bed or Bedding Layer 15mm thick as in Floor in Cement Mortar 1:3 complete all as specified and as directed. | 20 | Sqm | |
| 42 | 42 | M&L Machine cut kota stone slab flooring 20-25mm thick over & including 15mm thick screed bed in cement mortar 1:4 over sub base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed by the Engr-in-charge | 410 | Sqm | |
| 43 | 43 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over & including 10mm cement plaster in CM 1:3 and jointed including Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed. | 50 | Sqm | |
| 44 | 44 | M&L for cutting and polishing of existing kota stone floor including filling of existing joint and matching with the colour of kota stone finished complete all as specified and directed. | 300 | Sqm | |
| 45 | 45 | M&L Chequered Cement Concrete Tiles 300x300x25mm TH thick pre printed colour, Set and Jointed in Neat Cement Slurry with Grey Cement and Pigment over and including Screed Bed 15mm thick in Cement Mortar 1:6 as in Path complete all as specified and as directed. | 390 | Sqm | |
| 46 | 46 | M&L for sand filling under floors or in foundations including consolidation with electric compactor for 50mm thick complete all as specified and as directed. | 6 | Cum | |
| 47 | 47 | M&L Machine pressed precast concrete interlocking paver block any shape and size with Grey cement and no pigment conforming to IS 15658-2006 of 60mm thickness , M-35 Grade complete all as specified and as directed. | 120 | Sqm | |
| 48 | 48 | M&L granite(any type) slab 20mm thick laid over & including 15 mm thick cement mortar 1:4 as in bedded layer in floor /wall and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. | 60 | Sqm | |
| 49 | 49 | Dismantaling Plain or corrugated steel sheeting any guage, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. | 240 | Sqm | |
| 50 | 50 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screws as specifierd | 240 | Sqm | |
| 51 | 51 | Taking up & down steel tubing & connections,20mm including cleaning for re-fixing or removal to store | 350 | Rm | |
| 52 | 52 | Taking up & down steel tubing & connections15mm including cleaning for re-fixing or removal to store | 340 | Rm | |
| 53 | 53 | S&F of CPVC SDR-11 pipe 20mm bore fixed to concealed wall ceilling,laid in floor etc incl all fittings and solvent for jointing and brass threaded fittings for fixing taps etc. including taking up or down unserviceable Steel Water Tubing with Fittings and Connections etc. complete all as specified and as directed. | 300 | Rm | |
| 54 | 54 | S&F of CPVC pipe 25mm bore fixed to concealed wall ceilling,laid in floor etc incl all fittings and solvent for jointing any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections etc. complete all as specified and as directed. | 150 | Rm | |
| 55 | 55 | S&F Decorative wall mixer fancy type 15mm Bore, with neccesary taping items, Cast Copper Alloy with Capstan Heads, Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts screwed for Iron Pipe and fixed-in-repairs complete all as specified and as directed.Make : Jaguar/Cera/Marc | 2 | Each | |
| 56 | 56 | S&F Galvanized Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections etc. complete all as specified and as directed. | 40 | Rm | |
| 57 | 57 | S&F Galvanized Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situ-ation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections etc. complete all as specified and as directed. | 200 | Rm | |
| 58 | 58 | S&F Pillar Taps 15mm Bore, Cast Copper Alloy with Capstan Heads, Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. | 25 | Each | |
| 59 | 59 | S&F Angle Stop Cock 15mm Bore (dia), Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and as directed. | 46 | Each | |
| 60 | 60 | S&F Vitreous China Soap Dish, Single, as Approved, fixing with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish of any description, complete as all specified and directed. | 40 | Each | |
| 61 | 61 | S&F for 25mm dia MS powder coated Curtain rod with decorative nobes on both the and MS bracket for fixing in the wall by drilling and fixing wooden gutties inclunding remove old rod etc. and as directed by Engr-in-charge. | 300 | Rm | |
| 62 | 62 | S&F Chromium Plated Towel Rail 900mm Long, as Approved, fixed including Taking down unservice-able Towel Rail of any description, complete as all specified and directed. | 40 | Each | |
| 63 | 63 | S & F in repair figured glass pin head type 4mm thick ordinary quality and glazing with oil putty n.exc 0.5 Sqm in each panel complete as all specified and directed. | 12 | Sqm | |
| 64 | 64 | S&F Bib Cock 15mm Bore (dia), Chromium Plated Long Body Bib Cock, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed. | 60 | Each | |
| 65 | 65 | M&L Vitreous China Wash down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (including Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, Black, Closed Pattern with Recessed Bottom and Cover including Mild Steel Chromium Plated Aluminium Hanging Device and fixed-in-repairs,complete all as specified and as directed. | 2 | Each | |
| 66 | 66 | M&L for vitreous China Squatting Pan ‘ORISSA’ Pattern, size 580X440 mm White, with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan (including Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime Concrete Bedding including Taking out unservice able WC Pan and connected Items, complete all as specified and as directed. | 30 | Each | |
| 67 | 67 | S&F stop valve CP 15mm bore, cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed in repairs complete all as specified and as directed. | 60 | Each | |
| 68 | 68 | S&F PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of brackets duly Painted/Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, complete all as specified and as directed. | 40 | Each | |
| 69 | 69 | S&F Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, UPVC pipe 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. | 10 | Each | |
| 70 | 70 | S&F PTMT towel ring including Chromium plated brass screws & wooden / plastic cleats (Minimum weight 90gram per roll. | 40 | Each | |
| 71 | 71 | S&F PVC (SWR) Pipes 110mm Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls or Laid in Floors, etc, including Taking down /up unserviceable Pipe, complete all as specified and as directed. | 230 | Rm | |
| 72 | 72 | S&F PVC (SWR) Bend suitable for PVC (SWR) Pipes 110mm Bore (dia), jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. | 110 | Each | |
| 73 | 73 | M&L for welding in repairs thickness of Metal to be welded n.exc 6mm | 20 | 10Cm | |
| 74 | 74 | S&F in repair chromium plated shower rose fancy type fixed to 15 mm bore pipe all as directed by Engr-in-Charge | 30 | Each | |
| 75 | 75 | S&F Bib Taps 15mm Bore, Cast Copper Alloy,with crutch or butterfly screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed. | 10 | Each | |
| 76 | 76 | Taking down existing water tank of capacity 250 to 500 ltrs and refixing after necessary water proofing treatment on roof is over complete all as specified and as directed | 30 | Each | |
| 77 | 77 | S&F in repair 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and 20mm brass float valve complete all as specified and directed. | 10 | Each | |
| 78 | 78 | S&F in repair up to 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and 20mm brass float valve complete all as specified and directed. | 20 | Each | |
| 79 | 79 | S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 15 mm bore complete all as specified and directed. | 30 | Each | |
| 80 | 80 | S&F 20 mm Bore Gun metal globe gate valves with iron wheel head screwed both ends fixed-in-repairs complete all as specified and directed . | 30 | Each | |
| 81 | 81 | S&F in repair looking mirror 600x450mm bevelled edges of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and directed. | 40 | Each | |
| 82 | 82 | S&F in repair looking mirror not less than 2.5 Sqm and 6mm thick each glass mirror. bevelled edges of selected quality glass mounted on commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and directed . | 6 | Each | |
| 83 | 83 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed. | 80 | Each | |
| 84 | 84 | M&L for replacement of 100mm CI floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and directed. | 40 | Each | |
| 85 | 85 | Dismantling of cast iron or reinforced concrete pipes, jointed in cement mortar and taking out from trenches if required up to 75/100 mm dia pipes complete all as specified and directed. | 120 | Rm | |
| 86 | 86 | S&F 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and directed. | 90 | Rm | |
| 87 | 87 | S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and directed. | 110 | Rm | |
| 88 | 88 | S&F in repair 75mm dia CI bends, diminishing pieces or tapers complete all as specified and directed. | 12 | Each | |
| 89 | 89 | S&F in repair 100mm dia CI bends, diminishing pieces or tapers complete all as specified and directed. | 16 | Each | |
| 90 | 90 | S&F in repair 75mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches complete all as specified and directed. | 12 | Each | |
| 91 | 91 | S&F in repair 100mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches complete all as specified and directed. | 16 | Each | |
| 92 | 92 | S & F in repair vitrous china half stall urinals white or colour as directed complete including fixing all accesary and screw etc. pointing around urinal and provision of waste pipe PVC suitable for urinal pot complete all as specified and directed. | 16 | Each | |
| 93 | 93 | S & F in repair vitrous china urinal partitions white complete size as fixed urinal min 310x700mm including fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60 mm long brass screws, pointing around urinal and complete all as specified and directed. | 12 | Each | |
| 94 | 94 | S&F Sheet Glass, 4.0mm thick Ordinary, Glazing as in Window Frames fixed with Aluminium powder coated bead, not exc. 0.50 Sqm in Each Pane and fixed in repairs, complete all as specified and as directed. | 40 | Sqm | |
| 95 | 95 | S&F stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of Mild Steel Wire Stapes, fixing and repair etc, complete all as specified and as directed. | 40 | Sqm | |
| 96 | 96 | S&F Brass Hat Pegs, Solid body, 175 mm to 250 mm and fixed in repairs | 24 | Each | |
| 97 | 97 | Demolition of wall and ceiling and boards (Fibre, pulp, insulation etc.) or insulation board / slabs any thickness incl cover fillets complete all as specified and directed. | 437 | Sqm | |
| 98 | 98 | M&L for 12mm thick ply wood with 0.90mm thick sunmica laminates thick (coloured sheet as directed) as in cabinet/cup board complete all as specified and as directed.Make : Lennox/Reynobond/Alpolic/Allex & eqlnt. | 150 | Sqm | |
| 99 | 99 | M&L for suspended false ceiling consisting of suitable GI sections of ‘T’ Angle & FI as per Std Engineering practices with ‘E’ board classic ceiling boards 4mm thick in grid of 0.60x0.60mtr including cutting holes and making good holes for main joints, suspending with 4mm dia GI wire to roof slab, roof trusses, purlins & rafters etc and all as per approved and directed | 430 | Sqm | |
| 100 | 100 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement & fixing at site on PVC frame as per specification & drawing given by Engr-in- Charge. | 290 | Sqm | |
| 101 | 101 | S&F wall clading with fillet etc for Plain colour PVC sheet fixed in 1.5mm thick or laid on to flush doors by using rubber, based adhesive, supplying & fixing at site as per specification | 50 | Sqm | |
| 102 | 102 | S&F Pre-laminated Particle Boards 12mm thick, Exterior Grade, Pre-laminated on Both Sides with Decorative Finished, fixing as Panels of Aluminium Door Shutters, Aluminium Panelling Works, etc. with necessary Fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, pinotype higes, nobs,etc, as required/ordered at Site(s), complete and fixed in repairs complete all as specified and as directed. | 110 | Sqm | |
| 103 | 103 | S&F in repair mild steel works Fe-410 or 310 as in framed works such as door frame/ grills/ guard bar with ends of bars shoulders and or riveted or forged into spiked complete all as specified and directed. | 500 | Kg | |
| 104 | 104 | M&L for 2nd class Factory made hard wood, 35mm thick Plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides feather edged or veneered particle board medium density wood particle board with commercial face veneers to chowkats complete all as specified and directed. | 32 | Sqm | |
| 105 | 105 | S&F PVC Solid moulded Architrave Door Frame of Size 50X47mm & more made out of min 5.0mm Coloured with Plastic Trim decorated PVC Sheet Reinforced with Mild Steel Square Tube as specified Manufacture’s Instructions complete all as specified and as directed. | 280 | Rm | |
| 106 | 106 | S&F Factory Made PVC Solid moulded Architrave Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Draw-ings, complete all as specified and as directed. | 120 | Sqm | |
| 107 | 107 | S/F 150mm long Aluminium handles, cast type anodised complete all as specified and directed. | 160 | Each | |
| 108 | 108 | S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. | 100 | Each | |
| 109 | 109 | S&F Mild Steel Butt Hinges 100mm, Medium Weight, Cold Rolled ISI Marked and fixed, complete all as specified and as directed. | 120 | Each | |
| 110 | 110 | S&F in repairs 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. | 40 | Each | |
| 111 | 111 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 70 | Sqm | |
| 112 | 112 | Taking down old steel window /Aluminium frame with shutter exc 1.50 but n exc 4.00 sqm each up to 4 storeys building complete all as specified and directed.\nNote: Disturbed area shall be plastered and match with existing colour including putty. | 150 | Each | |
| 113 | 113 | Taking down old steel/aluminium window/ventilators frame with shutter n exc 1.50 sqm each up to 4 storey building complete all as specified and directed. \nNote: Distrubered area shall be plastered and match with existing colour including putty. | 20 | Each | |
| 114 | 114 | S&F factory made steel windows with two shutter (Glass & Wiremesh) with side hung shutters including, glass, wiremesh,grill, projecting type hinges with steel handle and steel peg stay ,two coats painting over primer complete with glazing bars dovetailed or welded complete all as specified and directed. | 10 | Sqm | |
| 115 | 115 | S&F factory made steel ventilators top hung two shutters(Glass & Wiremesh)with side hung shutters including, glass, wiremesh,grill, projecting type hinges with steel handle and steel peg stay ,two coats painting over primer complete with glazing bars dovetailed or welded complete all as specified and directed. | 5 | Sqm | |
| 116 | 116 | S&F aluminium colour powder coated door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed/pre laminated board exterior quality party glazed panels fabricated including aluminium powder coated beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- \n (a) Aluminium colour powder coated door frame section 101.60x44.45x1.93 mm fixed as per specified.\n(b) Aluminium colour powder coated vertical section in shutter 85x44.45x2 mm as per specified & directed. \n(c) Aluminium colour power coated Top & style shutter section 95.25x44.45x2.00 mm as per specified & directed. \n(d) Aluminium colour powder coated tower bolt handle 02 Nos in each shutter 200 mm long as per specified & directed. \n(e) Aluminium colour powder coated tower bolt 02 Nos in each shutter 150 mm long as per specified & directed. \n(f) Aluminium colour power coated middle lock rail/bottom rail section 150x44,45x2.00mm cat No.20002. Make-Jindal \n(g) Six lever mortice lock brass Make : Godrej/Classic on in each door. \n(h) 12 mm thick particular board (pre laminated both face) exterior grade ISI Marked \n(j) Tinted glass/Plain glass 5mm thick \n(h) Floor spring \nNote: If ground requirement for full glass or full Panel contractor shall be provide as per direction of Engr-in-C. | 40 | Sqm | |
| 117 | 117 | S&F aluminium colour powder coated (shade or tint as directed by GE) window/ventilator frame section 100x44x2mm fixed with thrust bolt in walls by drilling (any number of leaf) comprising the following:-\n(a) Aluminium colour powder coated (shade or tint as directed by GE) double shutter 44x44x2mm top/bottom/sides style. \n(b) Aluminium colour powder coated butt hinges 4 Nos in each window 100 mm sizes as per spd. \n(c) Aluminium colour powder coated tower bolt 3 Nos in each window 150 mm long as per spd.\n(d) Aluminium colour powder coated handle 2 Nos in each window 150 mm long as per spd.\n(e) Tinted glass 5 mm thick Make-Saint gobain modigaurd \n(f) Aluminium powder coated colour coated grill make deco grill DG-104 fixed with F or H Section.\nNote: If ground requirement for sliding window contractor shall provide as per direction of Engineer-in-Charge. | 90 | Sqm | |
| 118 | 118 | M&L for preparation and old decorated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. | 60 | Sqm | |
| 119 | 119 | M&L for preparation of newely steel surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chomate primer complete all as specified and as directed. | 6 | Sqm | |
| 120 | 120 | M&L for preparing old plastered surface of walls applying two coats of distempering with distemper oil emulsion over a coat of primer over and applying 3 mm thick birla putty for surface complete all as specified and as directed.\n | 380 | Sqm | |
| 121 | 121 | M&L for preparation of old treated surfaces of wall and applying one coats of exterior emulsion paint over and apply for 3 mm thick birla putty for surface weather proof and Dust Proof complete all as specified and as directed. | 350 | Sqm | |
| 122 | 122 | M&L for preparation of old surfaces of wood or wood based materials over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. | 20 | Sqm | |
| 123 | 123 | M&L for preparation and old decorated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed | 250 | Sqm | |
| 124 | 124 | S & F Framed work such as grills, gratings, with ornamental & intricate design ,purlin,angles,window/door grill etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders,framed balusters, walk ways; railings, & similar work conforming to Fe 290 GDE -E-165 complete all as specified and as directed | 1250 | Kg | |
| 125 | 125 | S & F Framed work such as grills, gratings, with ornamental & intricate design ,purlin,angles,window/door grill etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders,framed balusters, walk ways; railings, & similar work conforming to Fe 290 GDE -E-165 | 1250 | Kg | |
| 126 | 126 | S&F Structural steel Beam and stanchion fixed in wall to support old slab by cutting and pinning in existing walls cut to shape, drilled & welding etc, as necessary, gusset plates, each fixed independently, conforming to Fe 410w (GDE -E-250) and repair the hole with PCC 1:2:4 and making good with plaster complete all as specified and as directed | 950 | kg | |
| 127 | 127 | S & F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty & fixed complete all as specified and as directed | 10 | Each | |
| 128 | 128 | S&F hold fast, pintel, hinges, grill windows,hand made sliding bolts etc fabricated out of MS flat cleate for securing purlins and similar small articles complete conforming to Fe-410 etc. | 190 | Kg | |
| 129 | 129 | M&L for guniting RCC works in column, beams, slabs, ceiling,Chajjas,facia, landing, balconies etc by removing loose concrete including plaster, cleaning of surfaces with wire brushes and supply and fixing welded steel wire mesh 50 mm x 50 mm with 3 mm dia steel wire as facias/drops amd similar works etc and applying an epoxy resin concrete bonding agent treatment over the old concrete surface to bond with the new concrete with Nitobond EP of M/s Pidilite/M/s BASF (as per manufacturers instruction) to bond old and new concrete, guniting with minimum pressure of 2.5 Kg per Sqcm in two layers of total avg thickness shall be 40 mm thick with cement mortor (1:2) using ordinary port land cement of 53 grade mixing with waterproofing admixture polycrete @ 2% by weight of cement complete all as specified and directed. | 150 | Sqm | |
| 130 | 130 | Note for item No 129.00) :The following items shall be deemed to be included in quoted rate.\n(i) Reinforcement bars and plastering to gunning surface. \n(ii) After placing the reinforcement all concrete surface shall be throughly scrubbed with brush, washed with water and allowed to dry for plastering.\n(iii) Work is to carried out in patches.\n(v) Rate for scaffolding etc shall be deemed to be included in quoted rate.\n(iv) Gunniting at Ground floor to 4 th story.\n(vii) Anti-corrosive protective coating for reinforced bars.\n(v) Two coat oil bound/Apex over a coat of primer over \nGunniting including putty.\n(vi) 15 mm plaster in cement mortar 1:4 shall be done on Gunniting area\n(vii) Apply for Two coats of oil distermper/Apex on old surface / disturbed area. | |||
| 131 | 131 | Dismantling the existing LT panel complete and S&F out door type cubical panel board suitable for 3 phase, 4 wire, 415V, 50 Hz and tested at CPRI at 415 volts factory fabricated in an approved factory with CRCA sheet not less than 3.15mm thick having modern fabrication process powder coating in approved shade having thickness not less than 100 microns provided with suitable gasket to make it dust and vermin proof and general constructions conforming to IS : 8623/93. The LT Panel shall be front and back openable and having inner and outer shells. The inner shells duly compartmentalized for each control gears. The panel should have suitable size of Copper Bus -bar three phase 4 wire system having current carrying capacity not less than 1-5 times the rated current carrying capacity of the incomer ACB/MCCB. The panel should have the following incoming and outgoing controls duly fixed with the panel by means of suitable link plates complete all as specified and as directed by Engineer-in-Charge. approved manufacturer and to accommodate the following incoming and outgoing controls and suitable size:-\n (Make: Conelec Systems/Tricolite/Mc Layer/Indo Asian)\n | 1 | Each Job | |
| 132 | 132 | INCOMING\n(i) MCCB 200 A 4 pole -1 No (Adjustable thermal and fixed magnet setting) \n(ii) Digital Multi functional meter VAFPP (voltage, current,frequency, power factor- 1 No (iii) Phase indicator lamp (LED type) 1 ste (set of three) OUT GOING\n(i) MCCB 100A 3 pole - 01 Nos (Fixing thermal and fixed magnet setting) (ii) MCCB 63 A 3 pole - 03 Nos (Fixing thermal and fixed magnet setting) \n | |||
| 133 | 133 | Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-charge | 8 | Cum | |
| 134 | 134 | M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm. | 6 | Cum | |
| 135 | 135 | M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ complete laid dry flat. | 500 | Each | |
| 136 | 136 | Laying only old serviceable bricks (retrieved under item 131 of Sch ‘A’. | 100 | Each | |
| 137 | 137 | M&L for PCC 1:2:4 type B2 using 40mm grade stone aggregate as in making of good of distrubed surface complete all as specified and as directed | 0.1 | Cum | |
| 138 | 138 | M&L complete for drilling hole under hard standing /road for laying of pipe for protection of cable etc by means of mannual bookle and without disturbing the top surface and making good the disturbed surface if any complete all as specified and as directed. | 6 | RM | |
| 139 | 139 | Supply and laying GI tube light grade 50 mm bore in trenches complete all as specified and as directed.\n | 6 | RM | |
| 140 | 140 | Taking out old unserviceabel underground cable of 1100 volts grade with stranded alluminium conductor of size 4core 25 sqmm from excavated trenches/pipes | 110 | RM | |
| 141 | 141 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core | 110 | RM | |
| 142 | 142 | M&L for earthing in replacement of with galvanized mild steel earth plate electrode 60cm x 60cm x 6cm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI strip 32x6mm as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in cement mortar 1:4 , funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of GI strip protected by 40 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation and earth work & connecting the earthing to an earthing test point complete all as specified & directed. | 2 | Each | |
| 143 | 143 | Taking down of old unserviceable copper / aluminium point wiring (light, fan, socket or power) complete including fitting & fixture such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. | 567 | Per Point | |
| 144 | 144 | Taking down of old unserviceable sub main wiring SPN/TPN of any capacity/Size complete all as specified and as directed. | 215 | RM | |
| 145 | 145 | Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in and including concealed PVC conduit of 20/25 mm complete with with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light point controlled by one switch complete all as specified and directed. \nFor One light/fan point controlled by one switch. \n | 365 | Per Point | |
| 146 | 146 | All as per item No. 145 above but for 05 Amps socket outlet on same board. | 42 | Per Point | |
| 147 | 147 | All as per item No.145 Above but One 5 pin, 5 Amps socket out let on independent board with 1.5 Sqmm cable & alongwith 1.5 Sqmm continous earth wire of copper conductor. | 95 | Per Point | |
| 148 | 148 | All as per item No. 145 above but One 15/20 Amps socket out let or for sheet metal enclosure on independent board with 4 sqmm cable alongwith 2.5 Sqmm continuous earth wire of copper conductor. | 65 | Per Point | |
| 149 | 149 | Supply and fixing ceiling rose 3 terminals complete all as specified and as directed. | 365 | Each | |
| 150 | 150 | S&F switch modular type 10 Amps single pole one way 240 volts | 502 | Each | |
| 151 | 151 | S&F socket out let modular type 5 pin 6 Amps | 137 | Each | |
| 152 | 152 | S&F two module socket modular type heavy duty out let 6 pin 6/16 Amps. | 65 | Each | |
| 153 | 153 | S&F switch modular type 16 Amps single pole one way 240 volts. | 65 | Each | |
| 154 | 154 | S&F one module fan regulator step type 120 watt 2 module. | 65 | Each | |
| 155 | 155 | M&L for metal flush box for fixing of switches 3 modular. | 160 | Each | |
| 156 | 156 | M&L for metal flush box for fixing of switches 08 modular. | 10 | Each | |
| 157 | 157 | M&L for metal flush box for fixing of switches 12 modular. | 25 | Each | |
| 158 | 158 | S&F modular white cover plate with frame 3 modular | 160 | Each | |
| 159 | 159 | S&F modular white cover plate with frame 8 modularMake:- Havells | 10 | Each | |
| 160 | 160 | S&F modular white cover plate with frame 12 modularMake:- Havells | 25 | Each | |
| 161 | 161 | Taking down light fitting any type & Make and refixing the same after renovation work complete all as specified and as directed. | 200 | Each | |
| 162 | 162 | Supply & fixing in replacement LED tube light along with fixture, 4 feet 20 W complete all as specified and as directed. | 60 | Each | |
| 163 | 163 | Supply & fixing Post Top light fitting 45/50W LED type. Make Halonix Model No HLPT-01-40-CW or equevalent of Havells/crompton/Philips | 4 | Each | |
| 164 | 164 | M&L for spray painting of ceiling fan of any size any type with one coat of synthetic enamelled paint after cleaning and making good the old damaged paint including writing MES number with black synthetic enamelled paint all as directed. | 15 | Each | |
| 165 | 165 | S&F MCB DB SPN 415 Volts 8 ways double door complete.\n | 2 | Each | |
| 166 | 166 | S&F MCB DB SPN 415 Volts 12 ways double door complete.\n | 3 | Each | |
| 167 | 167 | S&F in replacement of Load line DB TPN 415 Volts 4 ways double door vertical type complete with MCCB TPN as incomer. \n | 4 | Each | |
| 168 | 168 | Supply & fixing in replacement of thermal and megnatic MCCB 100 Amps TPN 16 KA complete all as specified and as directed. | 4 | Each | |
| 169 | 169 | S&F Replacement of MCB DB TPN 415 Volts 8 ways double door vertical type complete with MCB TPN as incomer.\n | 4 | Each | |
| 170 | 170 | S&F in replacement of MCB TPN 63 Amps 'C' ceries. | 3 | Each | |
| 171 | 171 | S&F of MCB SP-6-32 Amps,240 Volt B series type complete all as specified and as directed | 144 | Each | |
| 172 | 172 | S&F of MCB SPN-40-63 Amps,240 Volt B series type complete all as specified and as directed.\n | 5 | Each | |
| 173 | 173 | M&L for sub main wiring 2 run of size 6 sqmm PVC insulated electric power cable (heavy duty) 1100 volts grade with stranded copper conductor with, 4 sqmm PVC insulated copper conductor earth wire in concealed PVC conduit (2 run of 6 sqmm cable and one run of 4 sqmm wire and one run of PVC conduit will be measured as one unit) complete all as specified and directed. | 215 | RM |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
