Military Engineer Services-MES has published Repair/ Renewal To Lt Ug Cable Of Perimeter Security Light At Af Stn Agra. Submission Date for this Tender is 15-08-2020. Cable Laying Tenders in GE (AF) Tech Area, Agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Aug-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-08-2020 |
| Name of Work:SPL REPAIR/ RENEWAL TO LT UG CABLE OF PERIMETER SECURITY LIGHTS AT AF STN AGRA | |||||
|---|---|---|---|---|---|
| Sl. No. | Description of Schedule Item | Item Code / Make | Quantity / Nos of Units | Units | |
| 1 | 1 | Dismantling of ACSR conductor or AAC conductor,from PCC/steel tabular poles complete all as specified and directed. | 8.39 | Qtl | |
| 2 | 2 | Dismantling of cross arms of MS Channel or angle section etc complete all as specified and directed. | 5.33 | Qtl | |
| 3 | 3 | Dismantling of LT insulator of any type & any size complete all as specified and directed. | 282 | Each | |
| 4 | 4 | Dismantling of steel poles/strut of any type & Size complete all as specified and directed. | 2 | Each | |
| 5 | 5 | Dismantling of Concrete poles/strut of any type complete all as specified and directed. | 5 | Each | |
| 6 | 6 | Taking down carefully Old unserviceable light fittings with street light bracket from poles complete all as specified and directed. | 15 | Each | |
| 7 | 7 | Taking down carefully LED light fittings from poles and setting aside for reuse complete all as specified and directed. | 32 | Each | |
| 8 | 8 | Taking up of LT service connection cable etc complete of size upto 10 sqmm 2 core for reuse at new location or as directed at site complete all as specified and directed. | 160 | RM | |
| 9 | 9 | Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP-31), 09 meter long, complete with cast iron base plate, pole cap/finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be painted with two coats of aluminium paint over a coat of red oxide primer including painting blue(sky blue) strips of 15 cm width in alternate layers up to 1.2 mtr above the ground level complete all as specified and directed.\nNote : Excavation, Earth work and PCC etc shall be measured and paid separately. | 7 | Each | |
| 10 | 10 | S&F LED asymmetric light street/security light fitting of 48Watt with lumin efficiency not less than 100 lumin/watt complete with new generation energy saving and environmental friendly long life versatile pressure die-cast aluminium IP-66 roadway luminarie with high power LED as light source of capacity 48 Watt including connecting with suitable size of flexible copper conductor cable complete all as specified and directed. Make Havells Cat Part No: SL48 WLED 7575ASYBOPC or eqivalent Model of Bajaj/ CG/Philips | 30 | Each | |
| 11 | 11 | Refixing of LED street light obtained from Item No 7 above with street light bracket along with new nut bolts & washers complete with security light bracket complete all as specified and directed. | 32 | Each | |
| 12 | 12 | S&F Security light bracket made of GI pipe 32 mm dia, light grade for mounting, bracket bent to shape 1.50 RM including suitable clamps made by flat iron 32x6mm -(04 Nos) 02 Sets nut bolt including painted with coated aluminium paint over a coat of red oxide primer and with all fixing arregment complete all as specified and directed. | 62 | Each | |
| 13 | 13 | S&F PVC insulated & PVC round sheathed copper conductor of 1.5 sqmm, 3 single core cable for connecting street light to Kiosk box complete all as specified and directed. | 282 | RM | |
| 14 | 14 | Supply and fixing on pole kiosk box for security light made out of PVC size of box 250mm x 290mm x 50mm with aluminium bus bar 4 Nos of suitable capacity and one No SPN 5 Amp. including suitable clamps made by flat iron of size 32x6mm -02 Nos with nut bolt and all fixing arregment complete all as specified and directed. Make of box: HENSEL or equivalent model RITTAL/SINTEX | 47 | Each | |
| 15 | 15 | Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth and getting out in soft / loose soil complete all as specified and directed. | 1074.71 | cum | |
| 16 | 16 | M&L for PCC M-15 nominal mix,1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, bed plates etc including necessary from work complete all as specified and directed. | 0.43 | cum | |
| 17 | 17 | M&L for PCC nominal mix, type 1:3:6 C-2 (using 40mm graded crushed stone aggregate) as in foundation of poles, stays etc as mass concrete complete all as specified and directed.\n\n | 3.8 | cum | |
| 18 | 18 | Returning , filling in , including spreading , leveling, watering and well ramming in layers n.exc. 25cm thick in soft/loose soil complete all as specified and directed. | 792.67 | Cum | |
| 19 | 19 | Removing surplus excavated materials n.exc. 50mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. | 325.06 | Cum | |
| 20 | 20 | Material and labour for providing sand cushioning with dry fine sand including filling, spreading, levelling punning/compacting in layers in cable trenchs with approved quality of sand for protection of under ground cable complete all as specified and directed.(Punned/ compacted thikness shall be measured and paid separately) | 321.28 | Cum | |
| 21 | 21 | Supply & laying reinforced precast concrete cable cover class LV, Type 2, flat size 300mmX180 mmX40 mm complete all as specified and directed. | 17500 | Each | |
| 22 | 22 | Supply, laying, testing and commissioning cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty)1100 Volts grade with stranded aluminium conductor, of size 185 sq mm 3.5 core complete all as specified and directed. | 1500 | RM | |
| 23 | 23 | Supply, laying ,testing and commissioning cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty)1100 Volts grade with stranded aluminium conductor, of size 95 sq mm 3.5 core complete all as specified and directed. | 1133 | RM | |
| 24 | 24 | Supply, laying ,testing and commissioning cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty)1100 Volts grade with stranded aluminium conductor, of size 50 sq mm 3.5 core complete all as specified and directed. | 775 | RM | |
| 25 | 25 | Supply, laying ,testing and commissioning cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty)1100 Volts grade with stranded aluminium conductor, of size 16 sq mm 4 core complete all as specified and directed. | 2770 | RM | |
| 26 | 26 | Supply, laying ,testing and commissioning cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty)1100 Volts grade with stranded aluminium conductor, of size 10 sq mm 4 core complete all as specified and directed. | 280 | RM | |
| 27 | 27 | Boring of holes under road,pavement hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 Mpa working pressure complete all as specified and directed. | 58 | RM | |
| 28 | 28 | M & L GI tubing (light grade) with all fittings, laid in trenches or under road crossing as protection pipe or fixed alongwith walls/poles with necessary clamps, nuts bolts and washers, bore of pipe 50mm complete all as specified and directed. | 92 | RM | |
| 29 | 29 | M & L GI tubing (light grade) with all fittings, laid in trenches or under road crossing as protection pipe or fixed alongwith walls/poles with necessary clamps, nuts bolts and washers, bore of pipe 80mm complete all as specified and directed. | 28 | RM | |
| 30 | 30 | M & L GI tubing (light grade) with all fittings, laid in trenches or under road crossing as protection pipe or fixed alongwith walls/poles with necessary clamps, nuts bolts and washers, bore of pipe 100mm complete all as specified and directed. | 12 | RM | |
| 31 | 31 | S&F bus-bar chamber outdoor type made out of MS sheet of 3mm thickness, fixed on angle iron frame(size 35x35x5mm) grouted in PCC Size 450mm x 450mm x 750mm with aluminium busbar (capacity 200 Amp - 04 NOs) fixed on epoxy insulator suitable for 200 amps rating complete all as specified and directed. | 7 | Each Job | |
| 32 | 32 | S&F cable route indicator made route of MS sheet of size 30cmx20cm of 4mm thick with writing HT/LT cable with MS angle iron frame and two Nos legs of 1.2 m long of size 25x25x5mm fixed in ground in PCC block of size 15cmx15cmx15cm including painting of specified colour over one coat of red oxide primer complete all as specified and directed. | 30 | Each job | |
| 33 | 33 | S&F sheet metal enclosure double door 4 way suitable for 240V with 200 Amps rated busbar complete all as specified and directed. | 7 | Each | |
| 34 | 34 | S&F MCB TPN 16 Amp,4 Pole,'C' series complete all as specified and directed. | 7 | Each | |
| 35 | 35 | M & L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick directly burried in to ground(earth pit not less than 3.75m deep below normal ground level) with top edge of earth plate not less than 3.0 m below the normal ground level with and including provision of earth test point terminal block made out of gun metal or phosphorous bronze of size 75x75x25 mm drilled and screwed with and including 3 Nos. 8 mm dia 25 mm long hexagonal head GI screw and necessery connection complete, connected to GI strip 30x5mm dia by means of bolts, nuts, check nuts and washers of GI or steel, 40mm bore GI pipe medium grade including necessery fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), coping shall be in PCC(1:3:6) type C-1 (using 20mm graded stone aggregate) and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM(1:4), funnel with wire mesh including 50mm thick cover of RCC(1:2:4) type B-1 (using 20mm graded stone aggregate) reinforced with 8mm dia MS TMT bar @75mm C/C both ways, charcoal dust and common salt all as shown in electrical plate No. 3 of SSR part-1 (2009) inclding all necessary excavation & earth work and removal of surplus soil to a distance not exc 50m providing connection points with Galvanized MS bolts & washers as required and connection from earth test point to earth electrode with same GI strip alongwith protection pipe (upto a distance of 7.5 mtr is included in unit rate) and testing on completion complete all as specified and directed. | 10 | Each Set | |
| 36 | 36 | M&L for two single core PVC insulated cable with 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit not les than 25 mm dia including all conduit and fixing accessaries surface on wall/along with pole fixing with 25x4 mm GI strip 04 Nos (02 Sets with nut bolt) complete all as specified and directed. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate) | 200 | RM | |
| 37 | 37 | Supply, install, test and commissioning of factory made floor mounted LT Panel Out door cubical type CPRI approved (double door) made out of 3.15mm thick CRCA sheet suitable for 415Volts, 3 phase, 50 Hz,AC supply system totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opening and locking arrangement,both side slanting canopy and having TPN copper bus bar of capacity 200 Amps for phase and neutral and supported with DMC/SMC insulators with heat shrinkable sleeve complete including danger notice plate having conventional symbol of bone and skull be provided on bus bar chamber, internal wiring with minimum 1.5 sqmm PVC insulated multistrand copper conductors and shall be properly bunched, tied, ferruled for proper identification and crimped with adequate size of lugs, cables, provn of threded earthing stud at bottom of the panel shall be provided, panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1 (with using 20mm graded stone aggregate), MS channels for base frame 50x50x6 mm and supports, GI nut, bolts, washers etc. The panel board shall be powder coated finished over a coat of red oxided primer on out side and inside complete all as specified and directed with following accessories:- a) MCCB 100 Amps, 25 KA , 4 pole,Thermal magnetic. Make Legrand Cat No 420055 (Incommer)-01 No b) MCCB 40 Amps,16KA 4 pole Make Legrand Cat No 420012 (O/G)- 4 Nos c) MCCB 25 Amps,16KA 4 pole Make Legrand Cat No 420011(O/G)-02 Nos d) Digital Timer switch Alpharex make Legrand- Cat Part No41654 -01 Nos e) Power contactor 4 pole 40 A make Legrand Cat Part No416139 - 01 f) Cable Glands-03 Nos g) LED indicator Lamp RYB-1 set h) Multifunctional Digital Meter flush mounted - 01 No Make: L&T Model No 4110. | 1 | Each Job | |
| 38 | 38 | Supply, install, test and commissioning of factory made floor mounted LT Panel Out door cubical type CPRI approved (double door) made out of 3.15mm thick CRCA sheet suitable for 415Volts, 3 phase, 50 Hz,AC supply system totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opening and locking arrangement,both side slanting canopy and having TPN copper bus bar of capacity 100 Amps for phase and neutral and supported with DMC/SMC insulators with heat shrinkable sleeve complete including danger notice plate having conventional symbol of bone and skull be provided on bus bar chamber, internal wiring with minimum 1.5 sqmm PVC insulated multistrand copper conductors and shall be properly bunched, tied,ferruled for proper identification and crimped with adequate size of lugs., cables, provn of threded earthing stud at bottom of the panel shall be provided, panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1 (using 20mm graded stone aggregate), MS channels for base frame of size 35x35x6 mm and supports, GI nut, bolts, washers etc. The panel board shall be powder coated finished over a coat of red oxide primer on out side and inside complete all as specified and directed with following accessories:- a) MCCB 40 Amps, 16KA , 4 pole Make Legrand Cat No 420012- (Incommer)-01 No b) MCCB 25 Amps,16KA 4 pole Make Legrand Cat No 420011(O/G) -04 Nos c) MCB DP 25 Amp,10KA Make Legrand Cat Part No 408616 - 01 Nos ( Contactor) d) Digital Timer switch Alpharex make Legrand- Cat Part No 41654 -01 Nos e) Power contactor 4 pole 32 A make Legrand Cat Part No416129 - 01 f) Cable Glands-05 Nos g) LEDIndicator Lamp RYB-1 set h) Multfuctional Digital Meter flush mounted-01 No Make: L&T Model No 4110. | 2 | Each Job | |
| 39 | 39 | Supply, install, test and commissioning of factory made floor mounted LT Panel Out door cubical type CPRI approved (double door) made out of 3.15mm thick CRCA sheet suitable for 415Volts, 3 phase, 50 Hz,AC supply system totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opening and locking arrangement, both side slanting canopy and having TPN copper bus bar of capacity 100 Amps for phase and neutral and supported with DMC/SMC insulators with heat shrinkable sleeve complete including danger notice plate having conventional symbol of bone and skull be provided on bus bar chamber, internal wiring with minimum 1.5 sqmm PVC insulated multistrand copper conductors and shall be properly bunched, tied,ferruled for proper identification and crimped with adequate size of lugs, provn of threded earthing stud at bottom of the panel shall be provided, panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1 (using 20mm graded stone aggregate), MS channels for base frame of size 35x35x6 mm and supports, GI nut, bolts, washers etc. The panel board shall be powder coated finished over a coat of red oxided primer on out side and inside complete all as specified and directed with following accessories:- a) MCCB 40 Amps, 16KA , 4 pole -Make Legrand Cat No 420012- (Incommer)-01 No b) MCCB 25 Amps,16KA 4 pole Make Legrand Cat No 420011(O/G) -03 Nos- c) MCB DP 25 Amp,10KA -01 No MakeLegrand Cat Part No 408616 - 01 Nos d) Digital Timer switch Alpharex make Legrand- Cat Part No41654 -01 Nos e) Power contactor 4 pole 32 A make Legrand Cat Part No416129 - 01 f) Cable Glands-04 Nos g) LED Indicator Lamp RYB-1set h) Multifunctional Digital Meter flush mounted - 01 No Make: L&T Model No 4110. | 4 | Each Job | |
| 40 | 40 | Supply, install, test and commissioning of factory made floor mounted LT Panel Out door cubical type CPRI approved (double door) made out of 3.15mm thick CRCA sheet suitable for 415Volts, 3 phase, 50 Hz,AC supply system totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opening and locking arrangement,both side slanting canopy and having TPN copper bus bar of capacity 100 Amps for phase and neutral and supported with DMC/SMC insulators with heat shrinkable sleeve complete including danger notice plate having conventional symbol of bone and skull be provided on bus bar chamber, internal wiring with minimum 1.5 sqmm PVC insulated multistrand copper conductors and shall be properly bunched, tied,ferruled for proper identification and crimped with adequate size of lugs , provn of threded earthing stud at bottom of the panel shall be provided, panel board shall be grouted in the ground with suitable size of foundation in PCC 1:2:4 type B1 (using 20mm graded stone aggregate), MS channels for base frame 35x35x6 mm and supports, GI nut, bolts, washers etc. The panel board shall be powder coated finished over a coat of red oxided primer on out side and inside complete all as specified and directed with following accessories:- a) MCCB 40 Amps, 16KA 4 poleMake Legrand Cat No 420012- (Incommer)-01 No b) MCCB 25 Amps,16KA 4 pole Make Legrand Cat No 420011(O/G) -03 Nos- c) MCB DP 25 Amp,10KA -01 No MakeLegrand Cat Part No 408616 - 01 No d) Digital Timer switch Alpharex make Legrand- Cat Part No41654 -01 No e) Power contactor 4 pole 32 A make Legrand Cat Part No416129 - 01No f) Cable Glands-05 Nos g) LEDIndicator Lamp RYB-1set h) Multifunctional Digital Meter flush mounted - 01 No Make: L&T Model No 4110. j) Onload changeover switch 63 Amps 4 pole in sheet metal enclosure.Make : Legrand | 1 | Each Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
