| 1 | 1 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in Hard/Dense soil complete all as specified and as directed. | BI01010001010000000000000515BI0100001113 | 500 | SQM |
|---|
| 2 | 2 | Material and labour for PCC 1:4:8 type D-2 75mm thick (using 40mm graded stone aggregate) as in sub base under floor including necessary form work complete all as specified and as directed. | BI01010001010000000000000515BI0100001114 | 500 | SQM |
|---|
| 3 | 3 | Material and labour for Hardcore of gauge not exceeding 63 mm, deposited ,spread and levelled in layers not exceeding 15 cm thick ,watering and ramming complete all as specified and as directed. | BI01010001010000000000000515BI0100001115 | 75 | CUM |
|---|
| 4 | 4 | Material and labour for 100mm thick, PCC (1:2:4) type B-2 (using 40mm stone graded aggregate) as in floors/hard standing etc, finished even and fair incuding necessary form work complete all as specified and as directed. | BI01010001010000000000000515BI0100001117 | 500 | SQM |
|---|
| 5 | 5 | Material and labour for Forming contraction (Dummy) joints 12 to 15 mm wide ,13 mm deep and providing polysulphide (pouring compound) sealant type FB conforming to BS-5212-1990 of approved brand including painting the contact surface of the joints with polysulphide primer of approved brand filled with expanded polyethylene armour rod of 15 mm dia complete all as specified and as directed. Make: M/S Fosroc/M/S Dr Fixit | | 200 | RM |
|---|
| 6 | 6 | Material and labour for Forming Expansion joints 25 to 30 mm wide ,10 mm deep and providing polysulphide (pouring compound) sealant type FB conforming to BS-5212-1990 of approved brand including painting the contact surface of the joints with polysulphide primer of approved brand filled with expanded polyethylene armour rod of 30 mm dia complete all as specified and as directed. Make: M/S Fosroc/M/S Dr Fixit | | 50 | RM |
|---|
| 7 | 7 | Material and labour fo rcement concrete work in pavement/hard standing of flextural strength 40 kg/ per square centimeter in field using 400 kg of cement per cubic meter ,thickness of concrete less than 25 cm including necessary form work complete all as specified and as directed. | BI01010001010000000000000515BI0100001118 | 6 | CUM |
|---|
| 8 | 8 | Add/Deduct to item no :08 above Extra /Less cement used for cubic meter of concrete | BI01010001010000000000000515BI0100001119 | 10 | kg |
|---|
| 9 | 9 | Finishing surface of concrete pavements by brooming | | 55 | PER 10 SQM |
|---|
| 10 | 10 | Material and labour for Mild steel TMT bars 6 mm to 8 mm dia and over cut to length, bent to shape required,including cranking,bending,spirally for hooping for columns ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. | | 500 | KG |
|---|
| 11 | 11 | Removing building materials etc(other than spoil) to a diatance of 05 KM including loading, unloading and stacking at the destination complete all as specified and as directed. Note : Per Load = 100 CFT | | 10 | PER LOAD |
|---|
| 12 | 12 | Removing excavated soil exceeding 250 m but not exceeding 500 m and depositing where directed at a level n exc.1.5 m above the starting point complete all as specified and as directed. | | 75 | CUM |
|---|
| 13 | 13 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed. | | 50 | SQM |
|---|
| 14 | 14 | Brushing neat cement slurry with 3.00 kg of cement per sqm | | 50 | SQM |
|---|
| 15 | 15 | Material and labour for Screed bed or bedding layer of mortar 15mm thick of CM 1:6 for laying of floor finishes complete all as specified and as directed. | | 50 | SQM |
|---|
| 16 | 16 | Material and labour for Backing coat 10mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 complete all as specified and as directed. | | 25 | SQM |
|---|
| 17 | 17 | Material and labour for Ist Quality Coloured Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. | | 46 | SQM |
|---|
| 18 | 18 | Material and labour for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) for wall lining 12 mm thick in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding edges complete all as specified and as directed. | | 24 | SQM |
|---|
| 19 | 19 | Material and labour for Rounding to edges of stone slabs one edge,such as in steps and other similar situatuons | | 60 | RM |
|---|
| 20 | 20 | Supply and fix Stainless steel Mooring Ring grade 304, 25mm dia solid bar , 300 mm dia ring embeded in concrete with Hook or Anchor Bolt complete all as specified and directed . | | 130 | KG |
|---|
