Supply , Installation , Testing And Commissioning , Of Kitchen Equipment , Lpg Pipeline With Gas Bank And Exhaust Hood With Ducting Work In Soh-3 Girls Hostel Canteen In Niser Campus , Jatni, NISER JATNI-Odisha

Supply , Installation , Testing And Commissioning , Of Kitchen Equipment , Lpg Pipeline With Gas Bank And Exhaust Hood With Ducting Work In Soh-3 Girls Hostel Canteen In Niser Campus , Jatni:-1 Single Burner Cooking Range, 2 Single Sink, 3 Masala Table With 2 B / S, Dimension ( Inch ) - 24” X 24” X 34” + 6” Top :16 Swg 304 Grade Ss Sheet. Legs : 18 Swg Ss Pipes. Shelves : 18 Swg 304 Grade Ss Sheet. The Unit Is To Be Mounted On Bullet Type Adjustable Feet. Preffered Make- Ss-Jindal / Tata 4 Two Burner Chinese Cooking Range, Dimension ( Inch ) - 48”X24”X34”+6. Top In 16 Swg 304 Grade Ss Sheet Double Beeded On 3 Sides With Dripless Edges, Rear Splash Split Tray Of 16” High With 16 Swg Ss Pipe Legs And Adjustable Nylon Bullet Feet With Recessed Design Chinese Burners T35 ( 2 Nos. ) With Indivisual Pilot Flame. Preffered Make- Ss-Jindal / Tata, Burner Should Be Iocl Approved Burners 5 Three Burner Indian Range, 6 Chapati Plate With Puffer, 7 Rajastani Tandoor Vaati, 8 Tandoor Table With 2 U / S , 9 S.S Hood, Dimension ( Inch ) - 48”X30”X20”, 18 Swg 304 Grade Ss, Preffered Make - Jindal / Tata 10 S.S Hood, Dimension ( Inch ) - 72”X30”X20”, 18 Swg 304 Grade Ss, Preffered Make - Jindal / Tata 11 S.S Filter, Dimension ( Inch ) - 24”X24”, 304 Grade Ss, Preffered Make - Jindal / Tata 12 Sound Less Axial Flow Fan For Hot Air Ventillation, 1.5Kw / 2 Hp Cg / Almonard Motor, 13500 Cfm, Preffered Make - Cg / Almonard 13 Lpg Line With Gas Bank ( 6 +6 Cylinder Manifold System 14 Cutting Holes Of Required Size In Brick Masonry Wall For Fixing Of Exhaust Fan Including Providing And Fixing 300 Mm Dia Pvc Pipe Conforming Bis-12818 And Making Good The Same Etc. Complete As Per Direction Of Engineer-In-Charge. 15 Supply, Installation, Balancing And Commissioning Of Factory Fabricated Gss Sheet Metal Rectangular / Round Ducting Complete With Neoprene Rubber Gaskets, Elbows, Splitter Dampers, Vanes, Hangers, Supports Etc. As Per Approved Drawings And Specifications Of Following Sheet Thickness Complete As Required. 16 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Evel : 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 17 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete 18 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars 19 6 Mm Cement Plaster 1:3 ( 1 Cement : 3 Fine Sand ) Finished With A Floating Coat Of Neat Cement And Thick Coat Of Lime Wash On Top Of Walls When Dry For Bearing Of R.C.C. Slabs And Beams. 20 Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 4 X 2.5 Sq. Mm + 2 X 2.5 Sq. Mm Earth Wire Nmake: Polycab / Finolex / Universal / Nicco / Torrent Cable 21 Supply & Installation Of Dol Starter For 1.5 Kw 3-Phase ( 4-8 Amp ) Motor With Interconnection.

Refer document

INR 16635.0 /-

Refer document

Name of Work: Supply, installation, testing and commissioning, of kitchen equipment, LPG pipeline with gas bank and exhaust hood with ducting work in SOH-3 Girls Hostel canteen in NISER CAMPUS, Jatni
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	SINGLE BURNER COOKING RANGE, Dimension (inch) - 24”X24”X24” Top in 16 swg thick 304 grade ss sheet, front in 18 swg thick ss sheet and 18 swg SS pipe legs with adjustable nylon bullet with recessed design heavy duty removable grates of cast iron T 35/G-10 Burner with Individual Pilot Flame. Preffered Make- SS-JINDAL / TATA, Burner should be IOCL approved burners	item1	3	Nos.
2	2	SINGLE SINK, Dimension (inch) - 24”X24”X34”+6". Top in 16 swg thick 304 grade SS sheet, 18 swg SS square legs with adjustable nylon bullet top suitable design for utility water and wash of utensils, 304 grade 18 swg SS undershelf down beeded on all sides. Preffered Make- SS-JINDAL / TATA	item2	1	Nos.
3	3	MASALA TABLE WITH 2 B/S, Dimension (inch) - 24” x 24” x 34” + 6” Top :16 SWG 304 grade SS Sheet. Legs : 18 SWG SS Pipes. Shelves : 18 SWG 304 Grade SS Sheet. The unit is to be mounted on bullet type adjustable feet. Preffered Make- SS-JINDAL / TATA	item3	1	Nos.
4	4	TWO BURNER CHINESE COOKING RANGE, Dimension (inch) - 48”X24”X34”+6". Top in 16 swg 304 grade ss sheet double beeded on 3 sides with dripless edges, rear splash split tray of 16” high with 16 swg SS pipe legs and adjustable nylon bullet feet with recessed design chinese Burners T35 (2 nos.) with indivisual pilot flame. Preffered Make- SS-JINDAL / TATA, Burner should be IOCL approved burners	item4	1	Nos.
5	5	THREE BURNER INDIAN RANGE, Dimension (inch) - 72”X24”X34”+6" Top in 16 swg 304 grade ss sheet with dripless edges and rear splash split tray of 16”high with 16 swg SS pipe legs and adjustable nylon bullet feet with recessed design indian Burners G-10 with individual pilot burner. Preffered Make- SS-JINDAL / TATA, Burner should be IOCL approved burners	item5	1	Nos.
6	6	CHAPATI PLATE with PUFFER, Dimension (inch) - 72”X24”X34”+6". 12 mm hot M.S. chapati Plate with 304 grade 16 swg body with 18 swg SS pipe legs and adjustable nylon bullet feet, 1 ½” V-Burners - 4 Nos and indivisual pilot Burner with control Valve and puffer made out of C.I plate with holes. Preffered Make- SS-JINDAL / TATA, Burner should be IOCL approved burners	item6	1	Nos.
7	7	RAJASTANI TANDOOR VAATI, Dimension (inch) - 30"X30"X36". TOP:16 swg 304 grade SS sheet, LEGS: 18 swg 304 grade SS pipes, SHELVES: 18 SWG 304 grade SS sheet, The unit is to be mounted on adjustable nylon bullet feet. STRUCTURE: Top underneath by M.S. angles. Preffered Make- SS-JINDAL / TATA, Burner should be IOCL approved burners	item7	1	Nos.
8	8	TANDOOR TABLE WITH 2 U/S , Dimension (inch) - 30"X30"X34". TOP:16 swg 304 grade SS sheet, LEGS: 16 swg 304 grade pipes, SHELVES: 18 SWG 304 grade SS sheet, The unit is to be mounted on nylon bullet type adjustable feet. STRUCTURE: Top underneath by M.S. angles. Preffered Make- SS-JINDAL / TATA, Burner should be IOCL approved burners	item8	1	Nos.
9	9	S.S HOOD, Dimension (inch) - 48”X30”X20”, 18 swg 304 grade SS, Preffered make - JINDAL / TATA	item9	3	Nos.
10	10	S.S HOOD, Dimension (inch) - 72”X30”X20”, 18 swg 304 grade SS, Preffered make - JINDAL / TATA	item10	2	Nos.
11	11	S.S FILTER, Dimension (inch) - 24”X24”, 304 grade SS, Preffered make - JINDAL / TATA	item11	12	Nos.
12	12	SOUND LESS AXIAL FLOW FAN FOR HOT AIR VENTILLATION, 1.5KW/2 HP CG/ALMONARD MOTOR, 13500 CFM, Preffered make - CG / ALMONARD	item12	2	Nos.
13	13	LPG line with GAS BANK (6 +6 CYLINDER MANIFOLD SYSTEM), 70 ft. long including gas bank. 6+6 (One set working another set standby) LPG cylinder bank of 14.2 kg each LPG cylinder with: 'C' class seamless steel pipe conforming to IS:1239 : 2” for gas bank pipe laying and 1” for rest pipe laying, with twin stage Pressure regulator - Upto 30 PSI (dial type) and supported with wall by providing adequate supports spacing not more than 1.5 mtr., fitted with flanges & accessories and isolation valves having ball valves of approved makes with LPG installation certificate having carbon steel body, SS ball and PTFE seat and all other fittings such as tees, reducers, unions, elbows etc. The piping shall be joined through welding by using welding electrode of ISI marked only. Care must be taken to prevent rusting of piping installation by providing red oxide primer coating and suitable sleeve of GI/wood shall be provided wherever the pipes are crossing through the walls/slabs etc. On completion, the LPG manifold complete with all accesories and indivisual components which are subjected to cylinder pressure shall be capable of withstanding a test pressure twice the working pressure. All the acessories, components used for installation of LPG pipeline system shall have the approval from Oil company i.e. IOCL/HP/BP. Isolation/shut off valves shall be ball valves with installation certificate for use in LPG pipelines and shall have carbon steel body, stainless steel ball and PTFE seat. The work includes supply, installation, testing and commissioning of LPG manifold and supply system with atleast two coat paints as per LPG colour norms.The items covered under scope of works shall include all those ancillary items which may be required to complete the work in all respect whether specificlly mentioned or not. Fire fighting arrangements for LPG bank should be as per the guidelines of statutory body/local authority/local government. Preffered make - MS pipe of JINDAL / TATA	item13	70	Ft.
14	14	Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.	item14	1	Nos.
15	15	Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.	item15	47	SqM.
16	16	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth evel : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)	item16	0.75	CuM
17	17	Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete	item17	2.75	SqM.
18	18	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars	item18	70	Kg
19	19	6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.	item19	2.6	SqM.
20	20	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire \nMake: Polycab / Finolex / Universal / NICCO / Torrent cable	item20	107	Meter
21	21	Supply & installation of DOL starter for 1.5 KW 3-Phase (4-8 Amp) motor with interconnection.	item21	2	Set